HSGM HSG-0-electronic Operating Instructions Manual

HSGM

Heißschneide-Geräte
u.- Maschinen GmbH

HSGM GmbH

Telefon : [phone] Edition : 06.11.2017

In der Rehbach 13

Telefax : [phone]

Printed : 11.04.2018

D-65396 Walluf

E-Mail: [e-mail]

Page:

1

http://www.hsgm.com

Operating instructions

Heat-Cutter
Type HSG-0-electronic

General information

These operating instructions belong to this product.
They contain important information about commissioning and operation.
Please observe them, even if you pass the device on to a third party.

Explanation of symbols

Please read these Operating Instructions carefully and keep them for later use!

To prevent accidents and damage to the device, it is essential to heed these signs.
Please also observe this if passing the product on to others.
For this reason, please keep the Operating Instructions for further reference!

Contents

Page
General Information 1
Explanation of symbols 1
Contents 1
Prescribed use 2
Safety notes 2
Functional description 3
Commissioning 3
Handling 4
Maintenance 4
Correction of faults 4
Technical data 4
Environmental conditions 5
Blades 5
Disposal 5
Warranty 5
Declaration of conformity 6

Warning about dangerous voltage!

Warning about a hot surface!

Warnings and Precautions!

Pic.:
HSG-0-electronic
with blade type R-50
(The blade is not included!)

HSGM

Heißschneide-Geräte
u.- Maschinen GmbH

HSGM GmbH

Telefon : [phone] Edition : 06.11.2017

In der Rehbach 13

Telefax : [phone]

Printed : 11.04.2018

D-65396 Walluf

E-Mail: [e-mail]

Page:

2

http://www.hsgm.com

Prescribed use

In conjunction with an appropriate blade, the Heat-Cutter shall be used only to separate or to cut synthetic fabric or cords,
ropes, bands and belting fabric. No other materials may be cut.

Safety notes

For safety reasons, unauthorised reconstruction and/or modifications to the thermal cutting device are not permitted.

Only a correctly operating mains socket (230Volt/50Hz) in the public supply network may be used for the power supply.

Do not operate the product in unfavourable ambient conditions.
Unfavourable ambient conditions are:

 Moisture or too high air humidity,
 Dust and flammable gases, fumes or solvents,
 Strong vibrations.

Always unplug the unit when not used.

The unauthorized conversion and/or modification of the product is inadmissible because of safety and approval reasons
(CE).

Make sure that the power cord does not come into contact with heat, oil or sharp edges during operation of the machine.
Damaged power cords can cause fires, short circuiting and electric shocks.
The connection cable is to be replaced only by the manufacturer or his servicing agent who have a special tool available.
Machines powered by mains voltage do not belong in the hands of children.
Please exercise special caution when children are present.
The structure of the Cutter complies with the safety class II. Make sure that the insulation of the housing is neither damaged
nor destroyed.

Any damage caused as a result of these operating instructions having been ignored will
not be covered by the warranty!
We will not accept liability for subsequent damage!
We will not accept liability for damage or injury caused by inappropriate handling or
ignoring of the safety notes. In such cases all warranty rights will become void.

When working in rooms, t

he vapours that arise on the cutting blade during cutting

must

be removed

directly using an extractor fan. Or only work in well-ventilated rooms.
PVC and PVC-coated materials may not be processed due to the harmful vapours arising during
cutting.

Pay attention to the risk of burns when using the machine!
The cutting blades can reach temperatures of approx. 600° Celsius. Do not touch the cutting blades
once you have switched the machine on. Do not lean the device against objects before the cutting
blade has cooled down completely.

Danger! Danger to life due to electric shock!
A fatal electrical shock can result if water gets into the housing.
Keep the machine away from water.
If water does get in, pull the plug out immediately and do not continue to use the machine.