HPF TRX 1 User Manual

Treadmill – TRX1

User Manual

RETAIN THIS MANUAL FOR FUTURE REFERENCE

PLEASE READ THIS MANUAL CAREFULLY BEFORE USE

TREADMILL

Table of Contents

Safety ............................................................................................................................................................. 1

ELECTRICAL SAFETY ...................................................................................................................................... 1

MECHANICAL SAFETY ..................................................................................................................................... 1

CLEANING YOUR TREADMILL ........................................................................................................................ 1

GENERAL CONSIDERATIONS......................................................................................................................... 2

Included Items .............................................................................................................................................. 2

WHATS IN THE BOX ......................................................................................................................................... 2

TOOL KIT ........................................................................................................................................................... 2

Set-Up ............................................................................................................................................................. 2

SAFETY NOTES FOR INSTALLATION ............................................................................................................ 2

ASSEMBLY INSTRUCTIONS ............................................................................................................................ 3

Operation ........................................................................................................................................................ 5

TURNING THE POWER ON .............................................................................................................................. 5

SAFETY KEY AND CLIP ................................................................................................................................... 5

GETTING ON AND OFF THE TREADMILL ...................................................................................................... 5

FOLDING THE TREADMILL .............................................................................................................................. 5

UNFOLDING THE TREADMILL......................................................................................................................... 5

MOVING THE TREADMILL ............................................................................................................................... 5

CONTROL PANEL FEATURES......................................................................................................................... 6

MAINTENANCE ................................................................................................................................................. 7

ADJUSTING THE RUNNING SURFACE ........................................................................................................... 7

LUBRICATING THE DECK ................................................................................................................................ 8

TROUBLESHOOTING ....................................................................................................................................... 8

ERROR MESSAGE AND SOLUTION ............................................................................................................... 9

TECHNICAL SPECIFICATIONS ......................................................................................................................... 10

i

TREADMILL

Safety

Before using the equipment, carefully read this manual and keep handy for future consultation.
The owner is responsible for guaranteeing that all equipment users are adequately informed of the safety

precautions.

ELECTRICAL SAFETY

To reduce the risk of burns, fire, electrical shock, or injury to persons, take the following precautions.



When plugged in, do not leave the treadmill unattended at any time. Unplug the treadmill from the power
source when it is not in use.



Do not use the treadmill if the unit is wet or the plug or cable is damaged or the treadmill is not working
properly. Do not use damaged or defective equipment.



Keep the power cable and plug away from heated surfaces.



Never place the power cord under carpeting or place any object on top of the power cord.



Use only the power cord provided with this treadmill



Turn the switch to the “off” position before shutting down the power supply, then remove the plug from the
socket.

This exercise equipment is designed and built for optimum safety for home use. However, certain precautions
always apply whenever you operate any exercise equipment. Be sure to read the entire manual before
assembling and operating this machine. Also, please note the following safety precautions.

MECHANICAL SAFETY



Before exercising make sure that the treadmill is functioning properly. To maintain the safety level of your
equipment, do not use if item is faulty.



Replace any damaged elements immediately and/or and do not use equipment until it has been repaired.



Always use original spare parts.



Inspect the equipment before exercising to ensure that all screws and nut are well fastened.



Never let any objects fall on or be inserted into any opening.



Never start the machine when someone is standing on the treadmill.

CLEANING YOUR TREADMILL



Do not expose the equipment to natural elements such as: sunlight, rain, sea mist, dust, dew, etc.



Only use a water dampened cloth to clean your equipment. Never use abrasives, alcohol or solvent for
cleaning.



Periodically fold the treadmill and clean the floor, this will help prolong the useful life of the product.



Incorrect maintenance can damage the product, and can result in the loss of guarantee.

1

TREADMILL

GENERAL CONSIDERATIONS



Never allow more than one person on the equipment at a time.



Keep the equipment well away from children and pets, especially during use, thus avoiding any possible
accidents.



Adjust resistance so the exercise is smooth and even.



Do not exercise 1 hour before or 2 hours after a meal.



Consult your doctor before commencing any exercise program. Special attention must be given to children,
pregnant women, the elderly, and people with heart problems and those with disabilities. You must stop the
exercise if any of the following symptoms occur: Dizziness, Shivering, and Shortness of Breath, Heart
Palpitations, Head or Chest Pains.



Use appropriate exercise clothing that facilitates body sweating. Use training shoes.



The figures and photos contained in this manual are merely for illustrative purposes. The company reserves
the right any technical and design specifications without prior notice. This manual can show optional features
which are not part of the acquired equipment.

Included Items

WHATS IN THE BOX



Treadmill frame



Control panel and handrails



Tool kit



User Manual

TOOL KIT



Emergency stop safety key x 1



Allen key x 2



Spanner x 1



Lubricant x 1

Set-Up

SAFETY NOTES FOR INSTALLATION



Don’t place the treadmill near water or in a damp environment. Temperature fluctuation such as inside a

garage will cause damage to the electrical components. Store in a dry room with steady temperature. Avoid
placing the treadmill on thick carpet. It should be placed on a flat clean surface allowing air to circulate
around it freely to avoid over-heating the motor. This treadmill is designed for home use only and should only
be used indoors in a clean dry area.



Place the treadmill 120 cm away from walls and furniture.

2

TREADMILL



It’s important that the treadmill base is firm and level. Check the floor level in the place where the equipment

will be installed. If the deck is positioned on uneven surface, it would cause premature damage to the
electronic system.



The plug point (power source) selected should be a dedicated circuit. It is very important that NO other
electrical equipment, such as computer or TV, share the same circuit. Do not use an extension lead. Always
turn the machine off at the power outlet and remove the plug when the treadmill is not in use, cleaning or
moving the machine.



Connect the power cord to the wall and turn on the red On/Off switch at the back of the machine. To turn off
the machine, press the STOP button on the console. Step off the machine, turn off the red On/Off switch at
the back of the machine and turn the power off at the wall.



Never leave the machine unattended or plugged in especially if there are young children around.



The treadmill is not suitable for children under 14 years of age or for people with physical conditions unless
they are supervised.



Seek medical advice if you are pregnant, injured or sick prior to using the machine.

Safety key: Anytime, if you pull out the safety key the window will display E---F and will sound a beep, the
treadmill stops; put back the safety key, the window will light and returns to default display initial (equivalent to
reset).

ASSEMBLY INSTRUCTIONS

PLEASE NOTE: Save packaging in case you need to return the item

Place the box in a clean location free from objects that could interfere with equipment set up. Carefully remove
the components and equipment from box. Before starting with the assembly of this fitness device, carefully read
through the set up steps. We also recommend that you view the assembly drawing prior to assembly. Remove
all packaging material and place the individual parts on a free surface. This will provide you with an overview
and will simplify assembly.

Please consider that there is always the risk of injury when using tools and carrying out technical activities.
Please proceed with care when assembling the device. Make sure you have a hazard-free working environment
and do not, for example, leave tools lying around. Deposit the packaging material in such a way that it does not
pose a danger.

Keep plastic bags away from children to avoid suffocation! Take your time when viewing the drawings and then
assemble the device according to the series of illustrations. The device must be carefully assembled by an adult
person. If necessary, request aid from another technically talented person.

Step 1: Open the package, take out the treadmill and remove all
packaging.

3

TREADMILL

Step 2: Place the treadmill on the ground smoothly and raise up the
handrail.

Step 3: Lock the handrail into the frame using the large knob. Note:
before setting up the handrail, please remove the fixings out of the
frame.

Step 4: Connect the wire inserting A into B.

Step 5: Put the plastic cap on the handrail and lock the

knob into the hole.

4

TREADMILL

Operation

TURNING THE POWER ON

The On/Off switch for the treadmill is located next to the power supply cord at the back of the motor cover. Flip
this switch to the “ON” position.

SAFETY KEY AND CLIP

The safety key is designed to cut the main power to the treadmill should your fall. Therefore, the safety key is
designed to bring the treadmill to an immediate stop. At high speeds, it may be uncomfortable and somewhat
dangerous to come to a complete stop immediately. So, use the safety key as an emergency stop only. To bring
the treadmill to a complete stop safely and comfortably, use the red stop button.

Your treadmill will not start unless the safety key is properly inserted into the key holder in the middle of the
console. The other end of the safety key should be securely clipped to your clothing so that in the case that you
fall, you will pull the safety key from the console, which will stop the treadmill immediately to minimize injury. For
your safety, never use the treadmill without securing the safety key clipped to your clothing. Make sure the
safety key is properly secured to your clothing.

GETTING ON AND OFF THE TREADMILL

Handle with care when getting on or off the treadmill. Try to use the handlebars while getting on or off. While you
are preparing to use the treadmill, do not stand on the running belt. Straddle the running belt by placing your feet
on both side rails of the treadmill deck. Place your foot on the belt only after the belt has begun to move at a
consistent slow speed.

During exercise, keep your body and head facing forward at all times. Never attempt to turn around on the
treadmill when the running belt is still moving. When you have finished exercising, stop the treadmill by pressing
the red stop button. Wait until the treadmill comes to a complete stop before attempting to get off the treadmill.

FOLDING THE TREADMILL

1. Turn off the treadmill, turn off the main power switch and pull out the plug.

2. Loosen the safety screw

3. Lift up the base, pull out and secure the pin on the left side of the frame.
Note: Store the safety screw in the container for locking screws. Check that the belt is centred If it is not, adjust

the belt so that it runs freely.

UNFOLDING THE TREADMILL

1. Place one hand on main frame, loosen the knob.

2. Carefully lower the treadmill to the floor.

MOVING THE TREADMILL

The treadmill can be moved around the house safely in its fold-up position by using the transport wheels. Firmly
hold onto handle bars with both hands, pull the treadmill towards you, incline 30-40 degree until it's portable on
wheels, drag or push slowly.

WARNING! Never use this treadmill without first securing the safety clip to your

CAUTION! For your safety, step onto the belt when the speed is no more than

SAFETY KEY: If you pull out the safety key the window will display SAFE and will sound a beep, the treadmill
stops; put back the safety key, the window will light and returns to default display initial (equivalent to reset).

clothing.

3km/h.

5

TREADMILL

Display the speed numerical value
Display time, distance, calories
Display the programs P1-P8

CONTROL PANEL FEATURES

Instructions monitor functions:


Program training manual P1-P8 pre-set
programs function.



The display shows: SPEED, TIME,
DISTANCE, CALORIES



Display LCD and 4 buttons + safety key.



S peed Range: 1 - 10 km/h.



Protection: Overloading, over current,
speed variation due to external factors;
electromagnetic interference.



Function alert sound.

How to start:
Check that the mains voltage is in

accordance with the product.
Connect the power-cord to a mains socket

(make sure the socket is switched off and is not an extension lead). Turn on the switch and the screen will light
up.

Place the safety key on the display (red circle) and attach the other end to your clothing; the display lights up
and you will hear a beep. The treadmill is now in manual mode "===". To use in manual mode, just press start
and the belt will begin to move. You can now control the speed using + / - .

LCD Window

Starting the treadmill

1. Press the start button. The display counts down and beeps. The belt starts moving at the lowest speed.
Make sure safety key is connected.

Adjusting the speed

1. Increase/decrease speed with the “+” or “speed –“ on the control panel

6

TREADMILL

PROGRAM

TIME

P1

SPEED

1.0

3.0

5.0

7.0

5.0

3.0

1.0

P2 SPEED

2.0 3.0 4.0 5.0 6.0 5.0 4.0 3.0 2.0 3.0 4.0 5.0 6.0 5.0 4.0 3.0 2.0

P3 SPEED

3.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0

8.0

5.0
P4 SPEED

2.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

6.0

9.0

3.0
P5 SPEED

1.0

5.0

8.0

5.0

2.0

5.0

8.0

5.0

2.0

5.0

8.0

5.0

2.0

5.0

8.0

5.0

2.0

5.0

8.0

3.0
P6 SPEED

2.0

4.0

6.0

8.0

6.0

4.0

2.0

4.0

6.0

8.0

6.0

4.0

2.0

4.0

6.0

8.0

6.0

4.0

2.0

4.0
P7 SPEED

3.0

5.0

7.0

9.0

7.0

5.0

3.0

5.0

7.0

9.0

7.0

5.0

3.0

5.0

7.0

9.0

7.0

5.0

3.0

5.0
P8 SPEED

2.0

5.0

8.0

2.0

5.0

8.0

2.0

5.0

8.0

2.0

5.0

8.0

2.0

5.0

8.0

2.0

5.0

8.0

2.0

5.0

Using the 8 training programs

P1-P8

The XM-PRO II has 8 automatic training programs: P1 - P8. To access the programs turn on the treadmill, click MODE
and when "===" appears on the display, click “SPEED +” to select P1 and for higher programs keep pressing "SPEED
+", then click MODE to confirm your selection. Next click “SPEED +” to set the time between 5 and 30 minutes. After,
press START and the display time will show the countdown timer. Each program has different intervals. When the
treadmill moves to the next interval, a beep will sound 3 times before the exchange. When completing the program,
a beep will sound 3 times before stopping the treadmill. The treadmill then returns back to normal manual mode
"===".

Auto programs

P1-P8

See the 8 pre-set speed segments (km/h) for the respective programs below:

MAINTENANCE

ADJUSTING THE RUNNING SURFACE

If the running surface becomes loose it can be adjusted by turning both sides evenly. Turning clockwise will tighten the
running surface. Turning counter-clockwise will loosen the running surface.

If the running surface moves to one side, adjust by tightening the loose side. Turning clockwise will tighten. Turning
counter-clockwise will loosen.

Small adjustments are recommended i.e. quarter or half turns vs full turns and tightening the running surface too
tightly and damaging the machine.

7

TREADMILL

Test the belt again to check slipping. Repeat procedure if necessary, but never turn the screws more than ½ turn
at a time.



For your own safety do not use loose clothing, tie or loose jewelry that could affect this adjustment.



Never turn the screws more than ½ of a turn at a time.



Always tighten one side and loosen the other to avoid making the belt too tight or too loose.



Treadmill operation. Adjust the belt with the treadmill running at 4 Mi/H (6.4 Km/H), but without anyone on
the belt.

After adjusting, walk on the treadmill for four minutes to test it. If necessary repeat the procedure. Excessive
tightening of the belt can compromise the useful life of the equipment.

LUBRICATING THE DECK

A well lubricated deck will ensure treadmill high performance and will reduce wear to the components. This
treadmill was pre-lubricated at the factory. However, to improve performance it may need periodical lubrication.

To check lubrication level, just lift up the belt and reach your hand in as far to the center as you can. If you hand
shows signs of silicone there is no need for additional lubrication. If the board is dry and there is little sign of
silicone on your hand then there is a need for additional lubrication. Your product should be lubricated every 10
hours of use.

TO LUBRICATE THE DECK

1. Stop the belt so that the seam is facing upwards and in the center of the deck.

2. Lift up the belt.

3. Place the spray nozzle between the belt and the board approximately 200mm from the front of the treadmill.

4. Apply the silicone from the front to the back of the treadmill on each side. Try to reach the center of the deck.
Spray application time must be about four seconds per side.

5. Spread the silicone by running the treadmill at 1 Km/h and step delicately on the treadmill from left to right.
Do this for some minutes to enable the silicone to spread on the belt.

TROUBLESHOOTING

WHEN TO CALL FOR

This treadmill is designed with user safety as the number one priority. In the event of
treadmill will shut off automatically to prevent user injury and to prevent damage to
such as the motor. When you encounter unusual behaviour from the treadmill, simply go
treadmill; turn the power switch off and on to reset the treadmill. This should
ready the treadmill for normal operation again. If after you have reset the
switch off and on again, and the treadmill is still not operational, then it is time to

HELP

clear

treadmill

electrical

expensive

incidental errors and

by turning the power

call

your dealer for

failure, the

components

to

the front of the

service.

NO SIGNAL ON THE MONITOR LED

If there is no signal on the monitor, even if you turn it off and turn on many times to reset
the comm unication cable between monitor and motor controller. First, make sure
and that the cable is not pinched or damaged. If defective, ask your dealer for a replacement

SCREEN

the

treadmill, check

the

connections are good

cable.

8

TREADMILL

Problem

Possible cause

Corrective action

Treadmill does not work

a) No connection to power supply

Plug into mains socket

b) Safety key not connected

Connect safety key to control panel

c) Damaged or disconnected cable

Check control panel and signal cable

d) Treadmill is not switched on

Switch on

e) Burnt fuse

Change fuse

Belt does not run properly

a) Belt requires lubrication

Lubricate the belt with silicone

b) Running belt too tight or loose

Adjust belt

Belt is slipping

a) Running belt is too loose
b) Motor belt is too loose

Adjust belt

Treadmill suddenly stops

a) The safety key dropped off the
control panel

Replace the safety key

Control panel buttons don´t work

a) Damaged control panel

Change the control panel

b) Cable disconnected or damaged

Change the cable

Information from monitor to controller
and feedback controller to monitor fail.

Check the cable that connects the
monitor to controller see if is lost or
injured

The voltage is above normal, the
motor or the controller are defective.

Check if the motor is damaged.
Make sure no objects obstructing

the normal movement of the belt or
the rolls, if no problems

up the controller must be replaced

Monitor receives no signal from the
safety key

Check the safety key connection.
Check the switch on the monitor if it is

in the correct position.

ERROR MESSAGE AND SOLUTION

9

TREADMILL

Model

Prestige Sports TRX1 Ultra

Motor Power

735W, 1.0Hp

Rated Frequency

50-60 Hz

Voltage

220-240 v

Power Cord

UK 3pin

Speed Range

1-10 KM/H

Running Belt

1000 x 340MM

Features

10% fixed incline

8 auto programs
Handrails with foam
Water bottle holder
Towel rail
Emergency stop, magnetic safety key

CE and RoHS Certified

Machine Weight

21 KG

Machine User Weight

100 KG

TECHNICAL SPECIFICATIONS

10

Some experts believe the incorrect or prolonged use of almost any
product could cause serious injury or death. For information that
may re

duce your risk of serious injury or death consult thepoints
below and additionally, the information available at
www.datastreamserver.com/safety

- Consult all docume ntation, packaging and
product labelling before use. Note that some
products feature online documentation which
should be printed and kept with the p roduct.

- Check product for loose / broken / damaged /
missing parts, wear or leaks (if applicable) be fore
each use. Never use a product with loose / b roken
/ damaged / missing pa rts, wear or leaks (if
applicable).

- Products must be inspected and serviced (if
applicable) by a qualified specialist every 6
months assuming average residential use by a
person of average weight and strength, ab ove
average technical aptitude, on a property
matching average metropolitan specification.
Intended use outside these guidelines could
indicate the product is not suitable for intended
use or may require more regular inspection or
servicing.

- Ensure all possible users of the p roduct have
completed an industry recognised training course
before being given access to the product.

- The product has been supplied by a general merchandise
retailer that may not be familiar with your specific applic ation or
your description of the applic ation. Be sure to attain third party
approval for your application from a qualified specialist before use
regardless of prior assurances by the retailer or its representatives.

- This product is not intended for use where fail-safe operation is
required. As with any product (take an au tomobile, aircraft,
computer or ball poi nt pen for example) there is always a small
chance of a technical issue that needs to be repaired or may
require replacement of the product or a part. If the possibility of
such failure and the associated time it takes to rectify could in any
situation inconvenience the user, business or employee or could
financially affect the user, business or employee then the product
is not suitable for your requirements. This p roduct is not for use
where incorrect operation or a failure of any kind, including but
not limited to a condition requiring product return, replacement,
service by a technician or replacement of parts could cause a
financial loss, loss of employee time or an in c

onven

ience

requiring compensation.

- If this item has been purchased in error considering the points
above simply contact the retailer directly for details of their
returns policies if required.