QuickSpecs
Storage
Overview
Page 1
HPE MSA 1050 Storage
The HPE MSA 1050 Storage brings affordable flash storage down to ever lower customer segments. The MSA 1050 is designed
to meet entry
requirements and budgetary constraints. With the lowest storage array price points in the HPE Storage
portfolio and field
deployments.
The HPE MSA 1050 fea
points. The array allows users to take advantage of the latest storage technologies in simple and efficient ways by providing a good
balance between perform
been the industry-leading entry storage Fibre Channel platform for the past eight years, with nearly 500,000 storage systems sold
worldwide. Starting at
affordable flash
•
•
•
•
- No time-consuming migrations required
HPE MSA 1050
-level storage
-proven ProLiant compatibility, the MSA 1050 is the platform of choice for smaller SAS, iSCSI and FC
tures 8Gb Fibre Channel, 12 Gb SAS, and 1GbE and 10GbE iSCSI at previously unattainable entry price
ance and budget resulting in a highly favorable $/GB return on their investment. HPE MSA Storage has
under $5,500* USD, the MSA 1050 provides affordable application acceleration. It’s seriously simple and
-ready storage to help you get the most performance for the lowest cost.
Configurations starting at $5,500 *
- Factory-configured, dual controller array with 4 host ports of either 8Gb FC, 1GbE, 10GbE or 12Gb SAS protocols
Simple, proven Gen10 ProLiant compatible shared storage
Access to MSA 2050 advanced data services with simplified licensing approach
Expandable and upgradable to meet new demands
- Small Form Factor (SFF) or Large Form Factor (LFF) models available
- MSA continues its heritage of providing affordable, easy to use shared storage without a big learning curve
- Intuitive setup and management for ProLiant administrators.
- New look-and-feel will fit right in with your Gen10 ProLiant servers
- Leverage flash storage with easy to use, easy to maintain tiering and read cache technologies
- No storage expertise necessary, system dynamically responds to workload changes, so you don’t have to
- Add new HDDs or disk expansions to your MSA 1050
- Upgrade system to the MSA 2050 through data-in-place upgrade: a simple 15 minute upgrade!
NOTE: * US Street Price (MSA 1050 base unit, dual 1GbE iSCSI controllers, four 300GB HDDs); prices are subject to change
without notice
QuickSpecs
HPE MSA 1050 Storage
Standard Features
Page 2
HPE MSA 1050 Storage
Array
Access Type
Block
Form Factor
2U, SFF or LFF
Number of controllers per array
2
Number of host ports per array
4
FC host connectivity
8Gb
iSCSI host connectivity
1Gb or 10Gb
SAS host connectivity
6Gb or 12Gb
Cache, per array
Max Read cache per array
4TB
Data (read/write) cache + system memory per array
12GB
Pool Capacity (with Large Pool Support)
562 TB (512 TiB)
RAID Levels supported
RAID 1, 5, 6, 10
Enclosures
Expansion Drive Enclosures
0-3 enclosures
LFF/SFF array/enclosure mixing
Supported
Maximum number of drives per array enclosure
24 SFF/12 LFF
Maximum number of drives per drive enclosure
24 SFF/12 LFF
Drive enclosure interface type
6Gb SAS
Drives
Maximum total HDDs per array
96 SFF / 48 LFF
Maximum total SSDs per array
96 SFF / 48 LFF
Max raw capacity per array enclosure
76.8 TB SFF / 120TB LFF
Max raw capacity per drive enclosure
76.8 TB SFF / 120TB LFF
Max raw capacity per array
307.2TB SFF / 480TB LFF
Drive Capacities
SFF SSDs (Mixed Use)
400GB, 800GB, 1.6TB, 3.2TB
LFF SSDs (Mixed Use)
400GB, 800GB
SFF HDDs
15K: 300GB, 600GB, 900GB
7.2K: 1.0TB, 2.0TB
LFF HDDs
7.2K: 2TB, 4TB, 6TB, 8TB, 10TB
Software Features
Thin Technologies
Thin Provisioning, Space Reclamation, Thin Rebuild
Tiering
Performance Tier, Standard Tier, Archive Tier
Replication
Snapshots (512), Volume Copy, Remote Snaps
Quality of Service
Virtual Tier Affinity
Additional Features
Maximum number of volumes
512
Maximum number of snapshots
512
Maximum number of hosts
512
Maximum number of initiators
1024
Customer self-installable
Yes
Customer self-repairable
Yes
Customer self-upgradeable
Yes
10K: 300GB, 600GB, 1.2TB, 1.8TB
QuickSpecs
HPE MSA 1050 Storage
Standard Features
Page 3
HPE MSA 1050 Storage
1.
AC Power supply
5.
CLI Port (mini USB)
2.
Controller Module A
6.
Network Management Port
3.
Controller Module B
7.
Cache Status LED
4.
Host Connection Ports (2)
8.
SAS Expansion Port
9 AC Power Supply
MSA 1050
Descriptions
Part Number
Storage Models
HPE MSA 1050 8Gb Fibre Channel Dual Controller LFF Storage1
Q2R18A
HPE MSA 1050 8GB Fibre Channel Dual Controller SFF Storage2
Q2R19A
HPE MSA 1050 12Gb SAS Dual Controller LFF Storage3
Q2R20A
HPE MSA 1050 12Gb SAS Dual Controller SFF Storage4
Q2R21A
HPE MSA 1050 1G iSCSI Dual Controller LFF Storage5
Q2R22A
HPE MSA 1050 1G iSCSI Dual Controller SFF Storage6
Q2R23A
HPE MSA 1050 10G iSCSI Dual Controller LFF Storage7
Q2R24A
HPE MSA 1050 10G iSCSI Dual Controller SFF Storage8
Q2R25A
Controller systems
All MSA 1050 models offer a common set of valuable features:
NOTES:
1
Includes LFF Array Chassis, two MSA 1050 FC 2-port controllers, SFPs installed,
drives not included
2
Includes SFF Array Chassis, two MSA 1050 FC 2-port controllers, SFPs installed,
drives not included
3
Includes LFF Array Chassis, two MSA 1050 SAS 2-port controllers, SFPs not needed
with SAS controllers, drives not included
4
Includes SFF Array Chassis, two MSA 1050 SAS 2-port controllers, SFPs not needed
with SAS controllers, drives not included
5
Includes LFF Array Chassis, two MSA 1050 1GbE 2-port controllers, SFPs installed,
drives not included
6
Includes SFF Array Chassis, two MSA 1050 1GbE 2-port controllers, SFPs installed,
drives not included
7
Includes LFF Array Chassis, two MSA 1050 10GbE 2-port controllers, SFPs
installed, drives not included, direct attached copper cables are supported in 10GbE
Controller systems
8
Includes SFF Array Chassis, two MSA 1050 10GbE 2-port controllers, SFPs
installed, drives not included, direct attached copper cables are supported in 10GbE
QuickSpecs
HPE MSA 1050 Storage
Standard Features
Page 4
• MSA 1050 storage system architecture maximizes performance
, depending on
Storage Management Utility (SMU). The MSA management GUI brings a new modern look and feel to array management.
Maximum hard drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 5, 6, and 10.
Application
The HPE MSA 1050 Storage is the ideal solution for customers running Oracle, Microsoft, SAP environments
software; high availability and disaster recovery solutions; and backup and recovery on the Oracle, Microsoft, and
SAP application platforms.
Learn more
To learn more about specific HPE Storage Solutions that are built with Oracle, Microsoft, SAP and Virtualization
- Includes SFF or LFF array chassis, depending on model
- Two FC, iSCSI or SAS controllers, depending on model
Two host ports per controller
Each controller supports 8 Gb FC, 1GbE iSCSI, 10GbE iSCSI or 12Gb SAS host connectivity
model
- 6 GB cache per controller. (4GB Read/Write plus 2GB System)
- Battery-free cache backup with super capacitors and compact flash
•
• Thin Provisioning allows storage allocation of physical storage resources only once they are consumed by an application.
Thin Provisioning also allows over-provisioning of physical storage pool resources allowing ease of growth for volumes
without predicting storage capacity upfront.
• All models feature a wide variety of drives: High-performance SSD drives, enterprise-class SAS, and SAS Midline drives.
• The MSA 1050 will support a maximum of 3 disk enclosures (either LFF and/or SFF). Add-on enclosures can either be
HPE MSA 2050 LFF Disk Enclosure or HPE MSA 2050 SFF Disk Enclosure. The MSA 2050 LFF or SFF Disk Enclosures
will support the MSA 1050 storage system.
• The MSA 1050 can grow incrementally to a maximum of 48 LFF, 96 SFF drives, or a combination of SFF and LFF
enclosures up to the maximum of 4 total enclosures.
• Virtual Storage Disks Groups can be spanned across multiple enclosures.
• Virtual Storage RAID levels supported: 1, 5, 6, 10.
•
• Multiple Disk Groups can be aggregated into a single storage pool.
• Storage pools allow data on a given LUN to span across all drives in a pool. When capacity is added to a system, the user is
also getting a performance benefit of the additional spindles.
• The maximum LUN size is 140TB (128TiB)
• Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified
resource management. Administrators can monitor and optionally control snapshot space usage.
• Prioritize data by assigning appropriate affinity level (Performance, No Affinity or Archive)
• Customers can configure 512 TiB capacity per virtual pool by enabling large pool support.
• Non-disruptive on-line controller code upgrade. Requires Multi-pathing software.
• Upgradable by design. Owners of an MSA 1040 array are able to do data-in-place upgrades to the new MSA 1050 array.
This unique ability protects the earlier investments in drives, and JBODs.
• Certain limitations are applicable. Please review the Upgrading to the HPE MSA 1050/2050/2052 Whitepaper before
upgrading your MSA 1040, 2040 or 2042 systems
• StoreEasy 3850 Gateway support for block and file storage.
Solutions
and those customers who are deploying virtual server technologies like VMware and Hyper-V. The MSA 1050
delivers enterprise functionality that enhances virtual environments, simplifies management, and reduces costs.
Easy to deploy, scale and maintain, HPE MSA 1050 Arrays ensure that crucial business data remains available.
Hewlett Packard Enterprise has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization
Hypervisor technology through extensive testing with the HPE MSA 1050, HPE servers, and management
environments in mind, visit the solution sites supporting each of these applications.
HPE MSA Storage hyperlink to: http://www.hpe.com/storage/MSA
QuickSpecs
HPE MSA 1050 Storage
Software
Page 5
Product Technology
• MSA 1050 10GbE iSCSI with 4-ports per array system, SFF or LFF
Modular
2U rack height. 12 LFF or 24 SFF drive bays, accommodating SSDs, SAS and SAS MDL Drives
only when a controller fails over to its partner controller
Drives
The MSA 1050 Storage systems support both the MSA 3.5-inch LFF drives, and the MSA 2.5-inch SFF drives.
Optional Disk
Just as the user has a choice of chassis for the array enclosure (LFF or SFF drive bays), they also have a choice of
HPE MSA 2050 LFF Disk Enclosure Q1J06A
• LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 3 total Disk Enclosures.
HPE MSA 2050 SFF Disk Enclosure Q1J07A
MSA 1050
Models
Chassis
available
Enclosures
MSA 1050 Storage offers 8 factory configured models:
• MSA 1050 8Gb FC with 4-ports per array system, SFF or LFF
• MSA 1050 12Gb SAS with 4-ports per array system SDD or LFF
• MSA 1050 1GbE iSCSI with 4-ports per array system SFF or LFF
NOTE: The MSA 1050 does not support single controller configurations. Single-controller support is provided
• Solid State Drives (SSDs) deliver exceptional performance for applications requiring high random read
IOPs performance.
• Serial Attached SCSI (SAS) enterprise-class drives are designed for high demand, 24x7 usage.
• SAS Midline (MDL) drives are usually reserved for archival of data as they are relatively inexpensive and
are available in very large capacities.
expansion disk enclosures accommodating either drive size. Both the MSA 2050 LFF Disk Enclosure and MSA
2050 SFF Disk Enclosure can be hot-added to an operating array. SFF and LFF Array enclosures and Disk
Enclosures can be mixed without limitations.
MSA 2050 LFF Disk Enclosure. This 2U enclosure is designed to support twelve HPE Storage LFF drives and
accepts MSA dual-ported 12Gb SSD and SAS Midline hard drives. The pre-configured MSA 2050 LFF Disk
Enclosure has two I/O modules and supports the MSA 1050 dual controller arrays.
• The MSA 2050 LFF Disk Enclosure can be attached to the MSA 1050 LFF or SFF storage models.
• Each MSA 2050 LFF Disk Enclosure ships standard with two .5m mini-SAS to mini-SAS cables for connection
to the MSA 1050 array expansion port or existing disk enclosure cascade port.
• LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 3 total Disk Enclosures
HPE MSA 2050 SFF Disk Enclosure This 2U enclosure is designed to support twenty four HPE Storage 2.5-inch
SFF drive bays and accepts MSA dual ported 12Gb SSD, SAS, or SAS MDL hard drives. The pre-configured MSA
2050 SFF Disk Enclosure has two I/O modules and supports the MSA 1050 dual controller arrays.
• The MSA 2050 SFF Disk Enclosure can be attached to the MSA 1050 LFF or SFF storage models
• Each MSA 2050 SFF Disk Enclosure ships standard with a two .5m mini-SAS to mini-SAS cables for connection
to the MSA 1050 array expansion port or existing disk enclosure cascade port.
QuickSpecs
HPE MSA 1050 Storage
Software
Page 6
Scalability
The MSA 1050 array configurations are designed to allow an installation to begin with smaller capacity and be able
Disk Group
A Disk Group is a collection of disks in a given redundancy mode (RAID 1, 5, 6, 10). Disk Group RAID level and size
storage pool for use with the Virtual Storage features.
LUNs
The MSA 1050 arrays support 512 volumes and up to 512 snapshots in a system. All of these volumes can be
LUNs independent of the physical storage.
Storage Pools
Storage pools are comprised of one or more Disk Groups. A volume’s data on a given LUN can now span all disk
expansion. As pools are expanded data automatically reflows to balance capacity utilization on all drives.
RAID 1, 5, 6,
The MSA 1050 features several important additional RAID levels. RAID 6 offers the highest level of RAID
oss all of the disks, no single disk is a
bottleneck. Striping also allows users to reconstruct data in case of a disk failure.
Performance
The performance figures provided here are for reference as many variables exist between array configurations,
2,960
to grow gradually as needed. The flexibility of SSD, SAS or SAS MDL drives technology, form factors, sizes, speeds,
and costs per GB allows a system to easily fit in almost any budget.
• Large Form Factor configurations can scale up to 120TB SAS MDL per array enclosure, expandable to
480TB SAS MDL with the addition of a maximum of three MSA 2050 LFF Disk Enclosure.
• Small Form Factor configurations can scale up to 76.8 TB SAS SSDs per array enclosure, expandable to
307.2 TB SAS with the addition of a maximum of three MSA 2050 SFF Disk Enclosure.
• Users may configure an MSA 2050 SFF array enclosure with MSA 2050 LFF Disk Enclosure. This is an
excellent option for a configuration that supports high-speed SFF SSDs or fast SFF enterprise-class SAS
drives in the array enclosure, combined with economical LFF drives staged for archival purposes, all in the
same array.
can be created based on performance and/or capacity requirements. Multiple Disk Groups can be allocated into a
mapped to LUNs. Maximum LUN sizes up to 140TB (128 TiB). Thin Provisioning allows the user to create the
drives in a pool. When capacity is added to a system, users will benefit from the performance of all spindles in that
pool.
The MSA 1050 supports large, flexible Volumes with sizes up to 128TiB and facilitates seamless capacity
10
protection. It allocates two sets of parity data across drives and allows simultaneous write operations. It can
withstand two simultaneous drive failures without downtime or data loss. RAID 10 is mirroring and striping without
parity and allows large Disk Groups to be created with high performance and mirroring for fault tolerance. RAID 5
combines the block striping and parity. Because data and parity are striped acr
workloads, hard drive types, disk group setup parameters and host system setup. Hewlett Packard Enterprise has
traditionally published a set of end-to-end MSA performance specifications that are fed into HPE Sizer tools which
are based on conservative real-world configurations. For consistency, the MSA performance numbers have been
documented in both Benchmark and End-to-End Performance tables. Complete End-to-End Performance results
will be provided for the MSA 1050 in a subsequent publication. These numbers are subject to change without
notice.
MSA 1050 End-to-End Performance Results:
HPE MSA 1050
MSA 1050 Array Performance 1
MSA 1050 RAID 1 SSD Performance Results
Random Reads (IOPs) 69,100
8Gb Fibre Channel with HDDs
2
8Gb Fibre Channel with SSDs
HPE MSA 1050
Random Writes (IOPs) 30,600
MSA 1050 RAID 5 Performance Results
Segmented Sequential Reads (MB/s)
3,4
QuickSpecs
HPE MSA 1050 Storage
Software
Page 7
2,850
Disk Group
results.
Configuration
Tools
Management access, out-of-band, Storage Management Utility (SMU), CLI.
Web Browser
The MSA 1050 arrays come integrated with web browser and CLI based software for storage and RAID
Explorer, Mozilla Firefox, and Google Chrome.
Support
power supplies, and I/O modules for simple, fast installation and maintenance. Hot add expansion of disk enclosures
HPE Server
Compatibility
The MSA
NOTE:
3
server
support
OS Support
Refer to the Hewlett Packard Enterprise support statements for complete current OS version
support
• Red Hat Linux
Segmented Sequential Writes (MB/s)
End-to-End performance notes
1) Performance results were generated using internal HPE test tools. Number and type of applications, drive
type and number of drives, operating system used, and the number of hosts will affect overall performance. This
table is provided strictly as a test-lab comparison
2) Dual Controller configuration, (4) 400GB Mixed Use SSDs, RAID: 1, two drives per Disk Group; one
per pool, 2 volumes per pool, block size: 8k, average latency under 5ms, Windows Server 2012 host, 8Gb FC
direct connect to array
3) Dual Controller configuration, (36) 15k HDD, RAID: 5, nine drives per Disk Group, 2 Disk Groups per pool, 2
volumes per pool, block size: 256k, average latency under 30ms, Windows Server 2012 host, 8Gb FC direct
connect to array
4) Sequential performance numbers were generated using segmented sequential workloads. For segmented
sequential workloads with a queue depth greater than 1, each sequential stream is targeted to operate on a
separate LBA range. Other types of sequential workloads that target specific LBA ranges may achieve higher
and
Management
support
Hot Plug
Expansion and
Replacement
rd
Party
Interface Types: USB 100/1000 Ethernet.
Protocols Supported SNMP, SMI-S, SSH, SMTP, FTP, SFTP, HTTP, HTTPS, Telnet
management, setup, configuration, and troubleshooting. The MSA 1050 management supports Microsoft Internet
All MSA 1050 models support hot plug expansion and replacement of redundant controllers, enclosures, fans,
is also supported.
1050 supports most HPE ProLiant and BladeSystems servers including
• HPE ProLiant DL, ML Servers
• HPE c-Class Blade Servers
• Compatibility must be confirmed at: http://www.hpe.com/storage/spock
depends on protocol
The MSA 1050 supports most multi-vendor industry standard Intel and AMD based (x86) servers. Hewlett
Packard Enterprise requires the Third-Party Server to be logged and listed on the Microsoft Windows Server
Catalog.
• Hewlett Packard Enterprise recommends that the Third-Party Server Vendor is an active member of TSANet.
Refer to the TSANet website for details:
• Non-HPE servers will generally be supported if the HPE storage stack is used. This includes supported HPE
branded HBAs and drivers, and supported FC switches.
http://www.tsanet.com
: http://www.hpe.com/storage/spock
• Microsoft Windows Server 2016
• Microsoft Windows Server 2012
• VMware
QuickSpecs
HPE MSA 1050 Storage
Software
Page 8
• SuSE SLES Linux
NOTE: depends on protocol
Advanced
The HPE MSA Advanced Data Services Suite can be purchased as an option on the MSA 1050 Storage
HPE MSA Advanced Data Services Suite E-LTU Q0H99AAE
licenses until additional tiers are added.
Remote Snap
• HPE MSA Remote Snap Software is array based software that provides remote replication on the HPE
system. This second system may be co-located with the first system or may be located at a remote site.
Advanced
Virtualized
Features
Data Services
Suite
Performance
Tiering and
Archive
Tiering
Storage on the MSA 1050 is all virtualized including Automated Tiering of Enterprise SAS (Standard Tier) and
Midline SAS (Archive Tier), Read Cache and Wide-Striping. Sub-LUN Tiering from SAS Midline to Enterprise
SAS drives is also a standard feature.
NOTE: The MSA 1050 supports virtual storage only. Linear storage is not supported on the MSA 1050.
NOTE: The purchase of an Advanced Virtualization Upgrade license is not required for virtual storage on
the MSA 1050. The Advanced Virtualization Upgrade functionality is included in the base MSA 1050
system as a standard feature.
systems.
The optional Advanced Data Services Suite includes the following functionality:
• Performance Tiering between the SSD tier and the Standard or Archive Tier
• 512 Snapshots
• Remote Snaps
HPE MSA Advanced Data Services Suite LTU Q0H99A
Disk tiers are comprised of aggregating 1 or more Disk Groups of similar physical disks. The MSA 1050
supports 3 distinct tiers:
1. A Performance tier with SSDs
2. A Standard SAS tier with Enterprise SAS HDDs
3. An Archive tier utilizing Midline SAS HDDs.
The MSA 1050 supports sub-LUN tiering and automated data movement between tiers. The MSA 1050
automated tiering engine moves data between available tiers based on the access characteristics of that data.
Frequently accessed “pages” will migrate to the highest available tier delivering maximum I/O´s to the
application.
To enable the tiering (data movement) between the Performance tier with SSDs and either of the other tiers,
the Advanced Data Services Suite is required. Systems containing only SSDs will not require additional
Snapshot and
Volume Copy
• All MSA 1050 arrays come standard with 64 snaps.
• A 512 Snapshot license is available as an option on the MSA 1050
• Snapshots create up to 512 point-in-time copies of data
• Volume Copy can create up to 128 point-in-time copies of data
• Point-in-time copies become standard volumes when they are complete
• Recovery is instant - revert data from any previous Snapshot or Volume Copy
• Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
• If telephone support and software updates are desired for bundled software functionalities like 64
snapshots and volume copy software, a combination HW + SW support care pack must be purchased.
MSA 1050 array products. MSA Remote Snap is a form of asynchronous replication which consists of
replication of block-level data from a volume on a local system to a volume on a second independent
QuickSpecs
HPE MSA 1050 Storage
Software
Page 9
File and Block
Want to get more out of your MSA SAN investment? Do you have unallocated capacity you want to use for file
https://www.hpe.com/h20195/v2/GetDOCUMENT.aspx?docname=c04111443
• HPE Remote Snap replication technology provides the ability to accomplish key data management and
protection capabilities. First, because Remote Snap uses snapshots as the underlying technology it
creates multiple local recovery points which can be used for such tasks as to complement daily backups;
second, replication provides the ability to access data in a remote site which could be used for dispersed
operations; and third but definitely not least important replication allows for business continuance in the
event of a failure on the primary site.
• In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a point-in-
time image of the data. This point-in-time image is then replicated to the destination volume by copying
the data represented by the snapshot via iSCSI or Fibre Channel protocols. Replication via the SAS
protocol is not supported. The amount of data transferred is minimized though the use of snapshots
whenever possible.
NOTE: One Advanced Data Services Suite License per array is required for replication. For example, if
you have two MSA arrays performing replication (from Primary system to Remote System), you will
need a total of 2 licenses.
Product Features
• Storage based asynchronous snapshot replication
• Support of iSCSI and Fibre Channel interconnects provides flexible options to the application
environments.
• Snapshot based replication technology means only changed data will be replicated to alternate site
• Replication between on MSA 1050 to another MSA is supported (1 to 1 peer connection).
• Replication up to four MSA 1050s to a single MSA 2050 is supported. Typical use case is to replicate
from "many" branch offices to the home office for the purpose of backing up data from the branches
• Advanced scheduler provides several options to IT administrators for business continuance
• Flexible architecture allows remote replication between MSA 1050 and MSA 2050 or MSA 2040/1040
arrays
using the virtual storage architecture and licensed for Remote Snap. Protects existing
investments and enhances business continuity planning objectives.
• Snapshot based replication enables both local and remote recovery depending on the need. Snapshot
replication isolates problems to a specific point in time which can be selected by the administrator.
Additionally snapshot replication supports longer distance replication.
• 512 Snapshots and Volume Copy integration provides better efficiencies by combining the management
and array technologies to create local copies.
• Fast application recovery with minimal or no transaction loss
• Creation of disaster tolerant copies of your critical business data
• No-single-point-of-failure solution to increase the availability of your data
Storage
shares or services? HPE StoreEasy 3000 Gateways are the answer: enabling optimized, efficient, secure, and
highly available file services and a greater return on your block storage investment for medium to large
organizations with branch offices or workgroups and new or existing SANs. Save time and money by
supporting hundreds to thousands of concurrent users and devices, as well as multiple diverse workloads
through rich file protocols. Your data is indispensable and protected as such through at rest and in flight
through features like built-in encryption, sophisticated access controls, and online snapshots. StoreEasy 3000
Gateway is a robust file gateway with turnkey clustered configurations, transparent failover, and online rolling
maintenance to deliver near continuous availability of data to users, servers, and applications in demanding
24x7 environments.
StoreEasy 3850 Gateway product page: https://www.hpe.com/us/en/product-catalog/storage/filestorage/pip.hpe-storeeasy-3000-storage.5335826.html
StoreEasy 3850 Gateway QuickSpecs:
QuickSpecs
HPE MSA 1050 Storage
Software
Page 10
visit: http://h22168.www2.hpe.com/us/en/partners/vmware/
r
HPE OneView
for VMware
vCenter
HPE OneView for VMware vCenter is a component within the HPE OneView plug-in for vCenter. It provides
VMware administrators that are using VMware's vSphere management console (vCenter) with the ability to
see how virtual machines are mapped to datastores and individual MSA 1050 volumes. By providing these
clear relationships between VM's, datastores and storage, the VMware administrator's productivity increases,
as does the ability to ensure quality of service. Roles for administrators can be defined on an individual basis,
providing the ability to apply specific permissions for both view and control functions.
HPE OneView for VMware vCenter supports mixed array environments including MSA 1050/2050/2052,
MSA 1040/2040/2042 and other HPE Storage systems.
When deployed with the MSA 1050 array, HPE OneView provides the following:
• Active Management functionality for the MSA 1050 array:
- Create/Expand/Delete a Datastore
- Create a Virtual Machine from a template
• Monitors the health and status of the MSA 1050
• Displays LUN / volume connections from VMs and ESX servers to the arrays and provides the
location and attributes of the MSA 1050 within the SAN
• Identifies what storage features are available to allow administrators to match the features available
on the MSA 1050 to their requirements
• Provide a cluster-level view of the storage
HPE OneView for VMware vCenter is downloadable from Software
Depot: https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=HPVPR
HPE
StoreFront
Manager for
Microsoft
vStorage API
for Array
Integration
(VAAI)
For more information on HPE OneView for VMware vCenter
HPE StoreFront Manager for Microsoft enables management and monitoring of HPE MSA Storage running in
Microsoft Hyper-V environment with a single pane-of-glass view to events/alerts, capacity and health
dashboards and detailed virtual infrastructure information. It integrates seamlessly with Microsoft System
Center Operations Manager (SCOM) and provides Microsoft administrators the following:
It supports heterogeneous HPE Storage environment including HPE MSA, HPE StoreVirtual, HPE 3PAR
StoreServ, HPE StoreOnce, HPE StoreEasy, HPE XP, HPE EVA and HPE StoreEver Storage.
When deployed with the MSA 1050 array, HPE StoreFront Manager provides the following:
• Monitors the health, events and alerts for the MSA 1050 – virtual pools, and volumes
• Provides detailed information on the VMs provisioned through MSA Storage
• Effortless installation and configuration using Powershell
HPE StoreFront Manager for Microsoft for MSA Storage is downloadable from Software Depot:
https://h20392.www2.hpe.com/portal/swdepot/displayProductInfo.do?productNumber=System_Cente
The vStorage API for Array Integration (VAAI) is one of the storage application programming interface (API)
sets in vSphere. VAAI is an API storage partners can leverage to enhance performance of virtual machine
(VM) management operations by delegating these operations to the storage array. With hardware offload,
ESX/ESXi hosts perform certain operations faster and consume less server CPU and memory resources, and
also storage port and storage fabric bandwidth. VAAI includes high performance and scalable VM data path
primitives.
Storage Hardware Primitives for VAAI
QuickSpecs
HPE MSA 1050 Storage
Software
Page 11
• Full Copy or Hardware Assisted Move
UNMAP reclaims space that is no longer on a thinly provisioned VMFS volume
• Block Zeroing or Hardware Assisted Zeroing
• Hardware Assisted Locking or Atomic Test and Set (ATS)
QuickSpecs
HPE MSA 1050 Storage
Warranty, Service and Support Information
Page 12
Warranty
Three-year limited warranty, parts exchange Next Business day delivery
NOTE: Firmware updates beyond the 3 year warranty period requires a support contract.
Solid State Drives
3/0/0 warranty; Customer Self Repair (CSR) subject to maximum usage and or maximum supported lifetime
unaffected by any substitution
Service and
Protect your business beyond warranty with HPE Support Services
simple.
Connect your
Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard
http://www.hpe.com/services/getconnected
Enclosures, Hard drives, and Options for the MSA 1050 carry their own warranty. Refer to Hewlett Packard
Enterprise Limited Warranty Statement for more information.
The MSA 1050 has been designed with customer self-repairable parts to minimize repair time and provide
greater flexibility in performing defective parts replacement. Please refer to Hewlett Packard Enterprise
limited warranty Statement and parts replacement instructions for further details.
NOTE: The warranty of the hard drive options purchased with the MSA 1050 models is different for SAS
hard drives versus SAS MDL. SAS hard drive options have a three year warranty and SAS MDL have a one
year warranty.
(SSD)
Warranty
limitations, whichever occurs first. Maximum Supported Lifetime is the period in years set to equal the
warranty for the device. Maximum usage limit is the maximum amount of data that can be written to the
device before reaching the device's write endurance limit.
NOTE: SSDs used for replacement will be of equal or greater capacity and are designed to meet or exceed
the original SSD warranty. Replacement drive/s could be of the same model drive or of a different model
qualified to operate interchangeably inside the MSA array. Warranties of these components are
Support
HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional,
and Operational Services to help accelerate your digital transformation. From the onset of your
transformation journey, Advisory and Transformational Services focus on designing the transformation and
creating a solution roadmap. Professional Services specializes in creative configurations with flawless and
on-time implementation, and on-budget execution. Finally, operational services provides innovative new
approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. HPE is
ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the complex
devices
Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single
consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts,
automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care
Service customers will also benefit from proactive activities to help prevent issues and increase optimization.
All of these benefits are already available to you with your server storage and networking products, securely
connected to HPE support
1
IDC
2
HP CSC reports 2014-2015
Learn more about getting connected at
QuickSpecs
HPE MSA 1050 Storage
Warranty, Service and Support Information
Page 13
Optimized Care
HPE Proactive Care with 6 hour call-to-repair commitment, three year Support Service
ations and advice. This Service combines three years’ proactive reporting and advice
as a standard service offering for your most
Standard Care
HPE Proactive Care with 24x7 coverage, three year Support Service
reports with recommendations and advice This Service combines three years proactive reporting and advice
Basic Care
HPE Foundation Care 24x7, three-year Support Service
resolving issues. This service includes need based Hardware onsite response within four hours. Simplify your
Foundation Care
HPE Foundation Care 24x7, three-year Support Service
his service that provides troubleshooting assistance on industry
leading software running on your HPE server. Simplify your support experience and make HPE your first call
Parts and
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered
Related Services
HPE Hardware Installation
HPE Datacenter Care service
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive
reports with recommend
with our highest level of hardware support; HPE’s 24x7, six hour hardware call-to-repair. HPE is the only
leading manufacturer who makes this level of coverage available
valuable servers and storage, including the HPE MSA 1050 Storage.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
HPE, Proactive Care helps prevent problems and maintains IT stability by utilizing personalized proactive
with our 24x7 coverage, four hour hardware response time when there is a problem.
https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf
HPE Foundation Care 24x7 gives you access to HPE 24 hours a day, seven days a week for assistance on
support experience and make HPE your first call to help resolve hardware or software problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Materials
HPE Foundation Care 24x7 gives you access to HPE 24 hours a day, seven days a week for assistance on
resolving issues. This service includes need based Hardware onsite response within four hours. In addition,
collaborative software support is included in t
to help resolve hardware or software
problems.
https://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-
8876ENW&cc=us&lc=en
hardware product in operating condition, including parts and materials for available and recommended
engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product
data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HPE due to malfunction
Provides for the basic hardware installation of HPE branded servers, HPE storage including the MSA 1050
devices and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf
HPE Installation and Startup Service
Provides for the installation and startup of HPE technology including BladeSystems, C-Class enclosure, HPE
ProLiant c-Class and Integrity server blades, storage blades, SAN switch blades, HPE Virtual Connect
modules (Ethernet and Fibre Channel), Ethernet network interconnects, and InfiniBand, as well as the
installation of one supported operating system type (Windows® or Linux). Included the HPE MSA 1050.
QuickSpecs
HPE MSA 1050 Storage
Warranty, Service and Support Information
Page 14
Helps improve IT stability and security, increase the value of IT, and enable agility and innovation. It is a
Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book
The HPE Support Center is a personalized online support portal with access to information, tools and experts
For more information: http://www.hpe.com/services
structured framework of repeatable, tested, and globally available services “building blocks.” You can deploy,
operate, and evolve your datacenter wherever you are on your IT journey. With HPE Datacenter Care, you
benefit from a personalized relationship with HPE via a single point of accountability for HPE and others’
products.
For more information, visit http://www.hpe.com/services/datacentercare
HPE Factory Express for Servers and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for HPE
servers and storage products. Customers can choose how their factory solutions are built, tested, integrated,
shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. HPE products supported through Factory Express include a wide array of servers and storage:
HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers
as well as the HPE MSA Storage, HPE 3PAR Storage, HPE XP, rackable tape libraries and configurable
network switches.
HPE Education Services
on a class today and learn how to get the most from your technology investment. www.hpe.com/ww/learn
HPE Support Center
to support HPE business products. Submit support cases online, chat with HPE experts, access support
resources or collaborate with peers.
Learn more www.hpe.com/support/hpesc
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE
warranty, HPE Support Service or HPE contractual support agreement.
QuickSpecs
HPE MSA 1050 Storage
Configuration Information
Page 15
Configuration Information
Step 1 - MSA 1050 Base Configurations
Pre-Configured
HPE MSA 1050 8Gb Fibre Channel Dual Controller LFF Storage1
Q2R18A
HPE MSA 1050 8GB Fibre Channel Dual Controller SFF Storage2
Q2R19A
HPE MSA 1050 12Gb SAS Dual Controller LFF Storage3
Q2R20A
HPE MSA 1050 12Gb SAS Dual Controller SFF Storage4
Q2R21A
HPE MSA 1050 1G iSCSI Dual Controller LFF Storage5
Q2R22A
HPE MSA 1050 1G iSCSI Dual Controller SFF Storage6
Q2R23A
HPE MSA 1050 10G iSCSI Dual Controller LFF Storage7
Q2R24A
HPE MSA 1050 10G iSCSI Dual Controller SFF Storage8
Q2R25A
in 10GbE Controller systems
Step 2 – Select Your Drives.
MSA HDDs and SSDs drives are for use with MSA Storage Systems only.
Customers can mix SSD, SAS, and SAS MDL drives in the same array enclosure and disk enclosure
12G SFF SAS SSDs (Mixed Use)
HPE MSA 400GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State
Drive
N9X95A
HPE MSA 800GB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State
Drive
N9X96A
HPE MSA 1.6TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State
Drive
N9X91A
HPE MSA 3.2TB 12G SAS Mixed Use SFF (2.5in) 3yr Warranty Solid State
Drive
N9X92A
SFF HDDs
12G SFF 15K SAS HDDs
HPE MSA 300GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard
Drive
J9F40A
HPE MSA 600GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard
Drive
J9F42A
Systems
NOTES:
1
Includes LFF Array Chassis, two MSA 1050 FC 2-port controllers, SFPs
installed, drives not included
2
Includes SFF Array Chassis, two MSA 1050 FC 2-port controllers, SFPs
installed, drives not included
3
Includes LFF Array Chassis, two MSA 1050 SAS 2-port controllers, SFPs
not needed with SAS controllers, drives not included
4
Includes SFF Array Chassis, two MSA 1050 SAS 2-port controllers, SFPs
not needed with SAS controllers, drives not included
5
Includes LFF Array Chassis, two MSA 1050 1GbE 2-port controllers, SFPs
installed, drives not included
6
Includes SFF Array Chassis, two MSA 1050 1GbE 2-port controllers, SFPs
installed, drives not included
7
Includes LFF Array Chassis, two MSA 1050 10GbE 2-port controllers, SFPs
installed, drives not included, direct attached copper cables are supported
in 10GbE Controller systems
8
Includes SFF Array Chassis, two MSA 1050 10GbE 2-port controllers, SFPs
installed, drives not included, direct attached copper cables are supported
SFF SSDs
QuickSpecs
HPE MSA 1050 Storage
Configuration Information
Page 16
HPE MSA 900GB 12G SAS 15K SFF (2.5in) Enterprise 3yr Warranty Hard
Drive
Q1H47A
12G SFF 10K SAS HDDs
HPE MSA 300GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr
Warranty Hard Drive
J9F44A
HPE MSA 600GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr
Warranty Hard Drive
J9F46A
HPE MSA 1.2TB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty
Hard Drive
J9F48A
HPE MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty
Hard Drive
J9F49A
12G SFF 7.2K SAS MDL HDDs
HPE MSA 1TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard
Drive
J9F50A
HPE MSA 2TB 12G SAS 7.2K SFF (2.5in) 512e Midline 1yr Warranty Hard
Drive
J9F51A
NOTE:
class SSD or SAS
12G LFF SAS SSDs (Mixed Use)
HPE MSA 400GB 12G SAS Mixed Use LFF (3.5in) Converter Carrier 3yr Wty
Solid State Drive
P9M79A
HPE MSA 800GB 12G SAS Mixed Use LFF (3.5in) Converter Carrier 3yr Wty
Solid State Drive
P9M80A
LFF HDDs
12G LFF 7.2K SAS Midline Drives
HPE MSA 2TB 12G SAS 7.2K LFF (3.5in) 512n Midline 1yr Warranty Hard
Drive
N9X93A
HPE MSA 4TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard
Drive
K2Q82A
HPE MSA 6TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard
Drive
J9F43A
HPE MSA 8TB 12G SAS 7.2K LFF (3.5in) 512e Midline 1yr Warranty Hard
Drive
M0S90A
HPE MSA 10TB 12G SAS 7.2K LFF (3.5in) Midline 512e 1yr Wty Hard Drive
P9M82A
Step 3 – Options
Drive
HPE MSA 2050 LFF Disk Enclosure
Q1J06A
HPE MSA 2050 SFF Disk Enclosure
Q1J07A
HP External Mini SAS 1m Cable
407337-B21
HP External Mini SAS 2m Cable
407339-B21
NOTE
• SAS MDL drives are designed for archival or reference data
• SAS MDL drives should not be used in a heavy or intense I/O
environment
Intense I/O environments require the use of enterprise-
•
drives
LFF SSDs
Enclosures
SAS Cables
NOTE:
• Each drive enclosure includes two 0.5m MiniSAS to MiniSAS cables
• Add up to 3 additional drive enclosures
• MSA 2050 LFF Disk Enclosure can be connected to either the MSA
1050 SFF or LFF dual controller systems.
•
HPE MSA 2050 SFF Disk Enclosure can be connected to either the
MSA 1050 SFF or LFF dual controller systems.
QuickSpecs
HPE MSA 1050 Storage
Configuration Information
Page 17
•
HP ProLiant 12 ft Power Cord
227099-001
Power Cord, (Australia/China/New Zealand)
227098-001
Power Cord, (Central Europe)
157215-001
Power Cord, (United Kingdom/Hong Kong)
157216-001
Power Cord, (Switzerland)
157219-001
Power Cord, (Italy)
157217-001
Power Cord, (Denmark)
157218-001
Power Cord, (Japan)
139867-001
Power Cord, (South East Asia/India)
157220-001
NOTE:
Step 4a - Choose Supported Options For Fibre Channel Infrastructure
PremierFlexOM4
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
OM3 FC LC-LC
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
Step 4b - Choose Supported Options For 10GbE Infrastructure
Copper Cable
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper
Cable
487649-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper
Cable
487652-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper
Cable
487655-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper
537963-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 7m Direct Attach Copper
Cable
487658-B21
DAC Cable
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper
Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper
Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
AC Power Cords
type cables
Connecting MSA 1050 Controller to a JBOD if a longer cable is
desired.
• Two PDU cables: one 142263-008 (Black) and one 1422633-013
(Grey), ship standard with all AC-powered enclosures
cables
Cable
QuickSpecs
HPE MSA 1050 Storage
Configuration Information
Page 18
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Supported
Mini-SAS HD to Mini-SAS Fanout Cables
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 1 Meter
Cable
K2R02A
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 2 Meter
Cable
K2R03A
HP Mini SAS High Density to Dual 2-lane Mini SAS External Fanout 4 Meter
Cable
K2R04A
HBAs for maximum future flexibility without downtime.
Mini-SAS HD to Mini-SAS HD Fanout Cables
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External
Fanout 1 Meter Cable
K2Q99A
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External
Fanout 2 Meter Cable
K2R00A
HP Mini SAS High Density to Dual 2-lane Mini SAS High Density External
Fanout 4 Meter Cable
K2R01A
HBAs for maximum future flexibility without downtime.
Mini SAS Cables
HP 1.0m External Mini SAS High Density to Mini SAS Cable
716189-B21
HP 2.0m External Mini SAS High Density to Mini SAS Cable
716191-B21
HP 4.0m External Mini SAS High Density to Mini SAS Cable
716193-B21
SAS controller. These are not used for connecting to a disk enclosure.
HP External 1.0m (3ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716195-B21
HP External 2.0m (6ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716197-B21
HP External 4.0m (13ft) Mini-SAS HD 4x to Mini-SAS HD 4x Cable
716199-B21
SAS Host Bus Adapters (HBAs)
HPE Smart Array E208e-p SR Gen10 12G SAS PCIe Plug-in Controller
804398-B21
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
726911-B21
HP H221 PCIe 3.0 SAS Host Bus Adapter
729552-B21
SAS Controllers
HPE Smart Array P408e-m SR Gen10 12G SAS Mezzanine Controller
804381-B21
HP Smart Array P741m/4GB FBWC 12Gb 4-ports Ext Mezzanine SAS
Controller
726782-B21
HPE Smart Array P408e-p SR Gen10 12G SAS PCIe Plug-in Controller
804405-B21
HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller
726825-B21
Switches
HP 6Gb SAS Switch Single Pack for HP BladeSystem c-Class
BK763A
HP 6Gb SAS Switch Dual Pack for HP BladeSystem c-Class
BK764A
Step 4c - Choose Supported Options For SAS Infrastructure
options
NOTE: Recommended to utilize Fanout cables when connecting to SAS
NOTE: Recommended to utilize Fanout cables when connecting to SAS
NOTE: These cables are used to connect 6Gb SAS initiator to MSA 1050
NOTE: These cables are used to connect 12Gb SAS initiator to MSA 1050
SAS controller. These are not used for connecting to a disk enclosure.
QuickSpecs
HPE MSA 1050 Storage
Configuration Information
Page 19
Step 5 – Software
The MSA Advanced Data Services Suite software is available as an option on
the MSA 1050.
HPE MSA Advanced Data Services Suite LTU
Q0H99A
HPE MSA Advanced Data Services Suite E-LTU
Q0H99AAE
NOTE:
• The Advanced Data Services Suite includes a Performance Tiering
LTU, 512 Snapshot Software LTU, and the Remote Snap Software LTU
• Individual Software titles are not available for sale on the MSA 1050
QuickSpecs
HPE MSA 1050 Storage
Technical Specifications
Page 20
MSA 1050
POWER REQUIREMENTS
Input Power Requirements
SFF/LFF arrays
110VAC 3.20A, 343W; 220VAC 1.67A,337W
Max Input Power
100-240 VAC, 50/60 Hz., 4.20-1.77A
Heat Dissipation
1174 BTU/hr
TEMPERATURE AND HUMIDITY RANGES
Operating Temperature
41°F to 104°F (5°C to 40°C)
Shipping Temperature
-40°F to 158°F (-40°C to 70°C)
Operating Humidity
10% to 90% RH @ 104°F (40°C) non-condensing
Non-Operating Humidity
Up to 93% RH @ 104°F (40°C)
DECLARED ACOUSTIC NOISE LEVELS
Sound Power
A weighted sound power LWAd=6,75 B
Sound Pressure
A weighted sound pressure LpAm - 55dB
SHOCK AND VIBRATION
Shock, Operational
3G's for 11 milliseconds
Shock, Non-Operational
Per NEBS GR-63-CORE UNPACKAGED EQUIPMENT SHOCK CRITERIA
(4.3.2)
Vibration, Operational
5-500Hz, 0.14 Grms shaped
Vibration, Non-Operational
3-365-3Hz, 1.22 Grms,z-axis,0.85 Grms, X&Y axis shaped spectrum
PHYSICAL
Height
3.5 in/ 8.9 cm
Depth (excluding cables)
controller handle)
MSA 1050 SFF 24-bay array: 19.5 in / 49.5 cm
MSA 105
Width (body only)
17.6 in / 44.7 cm (w/ ears 19 in / 48.26 cm)
Chassis Weight
(no controllers)
MSA 2050 LFF chassis: 31 lbs. (DC-pwr model: 32.6 lbs)
MSA 2050 SFF chassis: 29.1 lbs (DC-pwr model: 30.7lbs)
MSA 1050
User Interface
Status and activity provided via management interfaces. Status Indicators
on front of Controller
RAID Support
1, 5, 6, 10,
Cache Memory
6GB (4GB Read/Write.and 2GB System) ECC protection with backup to
Flash memory (indefinite backup)
Cache Backup
ECC protection with back up to flash memory (indefinite backup)
Upgradeable Firmware
yes
Disk Drive and Enclosure
Protocol Support
6 Gb SAS - Serial Attached SCSI
Host Ports
2 x 8Gb Fibre Channel per controller
2x12Gb SAS per controller
Expansion Port
SAS (SFF8088) 4x lane 6 Gb SAS
Weight, controller
MSA 1050 Controllers 4.8 lbs.
MSA 1050
Regulatory
Safety
UL 60950-1 (USA)
CAN/CSA-C22.2 No.60950-1-03 (Canada)
EN 60950-1 (European Union)
GS mark (Germany)
(typical-running I/O)
Controllers:
(back of ear to back of
0 LFF 12-bay array: 22.5in. / 57.2 cm
2 x 1GbE iSCSI per controller
2 x 10GbE iSCSI per controller
Info
QuickSpecs
HPE MSA 1050 Storage
Technical Specifications
Page 21
IEC 60950-1 (International)
CCC Mark (power supply only, China PRC)
Electromagnetic
VCCI:2008-04 Class A (Japan)
FCC 15:109(g) Class A (USA)
ICES-003:2004 Class A (Canada)
EN55022 : (European Union Class A); CISPR 22 (International Class A)
EN61000-3-2 : (Harmonics) (European Union)
EN61000-3-3 : (Flicker) (European Union)
EN 55024 (European Union, Immunity, Class A);CISPR 24 (International
Immunity, Class A)
AS/NZS CISPR 22, Class A (Australia, New Zealand)
CNS 13438 Taiwan, Class A (Taiwan)
KN22 Class A (Emissions Class A); KN24 (Immunity) (S Korea)
RoHS and WEEE
RoHS-6/6 Compliance, China RoHS, WEEE
Country Approvals
United States ,Australia/New Zealand, Canada, China (PRC), European Union,
Germany (GS Mark), Japan, South Korea, Taiwan
Compatibility
QuickSpecs
HPE MSA 1050 Storage
Summary of Changes
Page 22
Date
Version History
Action
Description of Change
06-Nov-2017
From Version 1 to 2
Changed
Changes made to the document
25-Sept-2017
Version 1
Created
All Content Created
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for
services are set forth in the express warranty statements accompanying such pr
Nothing herein should be construed as constituting an additional warranty.
shall not be liable for technical or editorial errors or omissions contained herein.
Microsoft and Windows NT are US registered trad
trademark of Intel Corporation. Unix is a registered trademark of The Open Group.
a0000
Hewlett Packard Enterprise products and
emarks of Microsoft Corporation. Intel is a US registered
5875enw- 15896 - Worldwide – V2 - 06-November-2017
oducts and services.
Hewlett Packard Enterprise
Loading...