HPE ProLiant ML10 Gen9 operation manual

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Overview

Page 1

HPE ProLiant ML10 Generation9 (Gen9)

HPE ProLiant ML10 Gen9, delivers a full featured single-socket tower server with the right features at a competitive price, easy to use and

Front View (details for 4LFF)

Media Bay

USB 2.0 connectors

Ambient temperature sensor

Hard drive bays

e. Remove the tower bezel.

maintain for growing small businesses and remote branch offices.

NOTE: To install HDD, must:

a. Power down the server. b. Remove all power. c. Disconnect each power cord from the

power source.

d. Remove the access panel.

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Overview

Page 2

f. Remove the EMI shield.

Drive cage

Rear View

Power Supply

Slot 1, PCIe3 x 8 (8,4,1)

Kensington security slot

Slot 2, PCIe3 x 16 (16, 8, 4, 1)

NOTE: To install HDD, must:

a. Power down the server. b. Remove all power. c. Disconnect each power cord from the

power source.

d. Remove the access panel. e. Remove the tower bezel. f. Remove the EMI shield.

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Overview

Page 3

NOTE: For more information on the expansion

definitions.

Slot 3, PCIe3 x 4 (4,1)

definitions.

NIC connector

Display ports

NOTE: For more information on the expansion

definitions.

Slot 4, PCIe3 x 4 (1)

definitions.

USB 3.0 connectors

Internal View

System fan connector

Front LEDs and power button module connector

Internal USB 2.0 connector

Processor

slot specifications, see PCIe expansion slot

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot

NOTE: To connect to a VGA monitor, a DisplayPort to VGA Active Dongle is required. NOTE: Video output is design for DisplayPort

1.2.

slot specifications, see PCIe expansion slot

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Overview

Page 4

24-pin power supply connector

SATA connector 2

Optical drive connector

SATA connector 4

Heatsink fan connector

TPM connector

Slot 4, PCIe3 x 4 (1)

definitions.

Slot 2, PCIe3 x 16 (16,8,4,1)

4-pin power connector

SATA connector 1

SATA connector 3

Front USB connector

SATA connector 5

Ambient temperature sensor connector

System battery

Slot 3, PCIe3 x 4 (4,1)

definitions.

Slot 1, PCIe3 x 8 (8,4,1)

DIMM slots

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot definitions.

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot

NOTE: For more information on the expansion slot specifications, see PCIe expansion slot definitions.

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Standard Features

Page 5

NOTE:

Intel® Xeon® processor E3 capabilities, and cost the

Processor One of the following depending on model

Model

CPU

Cores

L3 Cache

Power

DDR4 Hz

G4400

3.3GHz

3MB

54W

2133

E3-1225v5

3.3GHz

8MB

80W

2133

Cache Memory One of the following depending on model

8MB (1 x 8MB) Level 3 cache

NOTE: For Quad-core Intel Xeon® processors.

3MB (1 x 3MB) Level 3 cache

NOTE:

Chipset

Intel® C236 Chipset

http://www.intel.com/products/server/chipsets/

On System Management Chipse

Intel® Active Management Technology (Intel® AMT 11.0)

NOTE:

processor is installed. The server supports Intel AMT when the Intel Xeon processor is installed in the system.

NOTE:

amt

Memory

Type:

DDR4 Unbuffered (UDIMM)

DIMM Slots Available

4 DIMMs (2 Channels/ 2 DIMMs per channel)

Maximum Capacity

64GB

(4 x 16GB UDIMM @2133MHz)

NOTE: For information regarding HPE Server Memory visit: http://www.hp.com/go/memory.

Memory Protection

ECC

Network Controller

Intel® Ethernet Connection I219-LM

Expansion Slots

Expansion

Technology

Bus

Connector

Bus

Form Factor

Notes

PCIe 3.0

Full height/half length

PCIe 3.0

Full height/half length

PCIe 3.0

x16

Full height/half length

PCIe 3.0

Full height/half length

NOTE:

Storage Controller

Entry Models

Performance Models

Intel RST SATA RAID

For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.

-1200v5 quad core processor family is designed to deliver the best combination of performance, built-in

-effectiveness. The product also supports Intel® Pentium® and Intel® Core-i3 dual core processors. Choose one of

following processors based on the model:

frequency

For Dual-core Intel Pentium® and CoreTM i3 processors.

NOTE: For more information regarding Intel® chipsets, please see the following URL:

The server supports the Intel Standard Manageability when the Intel Pentium or Core i3

For more information, visit: http://www.intel.com/technology/platform-technology/intel-

(UDIMM)

Slots #

Width

Number

Bus Width indicates the number of physical electrical lanes running to the connector.

Intel RST SATA RAID

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Standard Features

Page 6

One of the following depending on model

Internal Storage Devices

One of the following depending on m

Optical Drives

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

Enablement Kit (#836742-B21).

Hard Drives

1 x1TB HPE LFF SATA HDD included in Performance Model

Hard Drive Bays

4 LFF Non-hot plug SATA 3.5" drives

Up to 6 LFF Non-hot plug SATA 3.5" drives

ML10 Drive Enablement Kit (#836739-B21).

Maximum Internal Storage

One of the following depending on model

CAPACITY

CONFIGURATION

Non Hot Plug LFF SATA

24TB

6 x 4TB

Power Supply One of the following depending on model

300W Multi-Output Power Supply

NOTE:

their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs.

specifically for HPE ProLiant Gen9

Essential Series servers.

Power Specification and Technical Content for supported power supplies can be found at: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111541

Required Cabling

System Fans

One of the following depending on model

Non-redundant

Redundant

1P model

One (1) Non-redundant system

Interfaces

Display Port

2 (rear)

NOTE:

Network RJ-45 (Ethernet)

1 (rear)

NOTE: When install ODD, HDD can support up to 5 drives. NOTE: To install ODD, must purchase HPE ML10 Gen9 Slim ODD

odel

NOTE: HPE ML10 Gen9 HDD Cable Screw Kit (#841425-B21) is required if install the 5th drive. If the 6th drive is required, must purchase HPE

HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance

All Entry-Level power supply options have been designed

Server Power Cords

The ProLiant ML10 Gen9 server is a tower server that ships standard with below power cords: AMS: US AP: AU/UK/India/Taiwan/Thailand Japan: JP CN: CN EMEA: EU/UK

If customers require additional local power cords, they can check the power cord matrix for the appropriate country specific SKU.

fan

NOTE: To connect to a VGA monitor, a DisplayPort to VGA Active Dongle is required.

Video output is design for DisplayPort 1.2.

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Standard Features

Page 7

USB 3.0

4 (4 rear)

USB 2.0

3 (2 front, 1 internal)

Operating Systems and Virtualization Software Support for ProLiant Servers

Microsoft Windows Server

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1447391526103.125225703.1938120508.

Up to 6LFF Non-hot plug SATA 3.5" drives

Optical Drive Bay

B21).

Industry Standard Compliance

PCIe 3.0 Compliant

PXE Support

Microsoft® Logo certifications

USB 2.0 /3.0 Support

Graphics

GPU Support (Xeon Only)

Form Factor One of the following depending on model

Security

Power-on password

Setup password

Power switch security

Administrator's password

TPM 1.2

TPM 2.0

NOTE:

UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants. HPE Gen9 servers purchased earlier may need the latest firmware be compatible with the TPM 2.0 Option. The earlier HPE Trusted Platform Module Option (488069 technology standards incorporated. The TPM 1.2 compatible server platfor Gen9 servers. HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.

UEFI

Warranty

NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next

Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for

Upgradeability

NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and Virtualization Software

and latest listing of software drivers available for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupportand our driver download page:

NOTE: HPE ML10 Gen9 HDD Cable Screw Kit (#841425-B21) is required if install the 5th drive. If the 6th drive is required, must purchase HPE ML10 Drive Enablement Kit (#836739-B21).

NOTE: When install ODD, HDD can support up to 5 drives. NOTE: To install ODD, must purchase HPE ML10 Gen9 Slim ODD Enablement Kit (#836742-

NOTE: Embedded GPU support for Xeon processor only.

Up to 6LFF Drive

HPE Trusted Platform Module 2.0 Option (745823-B21) works with Gen9 servers with

update to

-B21) is the TPM 1.2 version, which is also available however TPM 2.0 has newer ms include Gen8 and

business day response. Warranty repairs may be accomplished through the use of Customer Self

QuickSpecs

HPE ProLiant ML10 Generation9 (Gen9)

Standard Features

Page 8

easy replacement. A travel and labor charge will result when customers decline to replace a

replace Optional CSR

at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise parts at no charge. Additional information regarding worldwide limited warranty and technical support is available

+ 16 hidden pages