HPE ProLiant MicroServer Gen10 Plus User Manual

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Overview

Page 1

HPE ProLiant MicroServer Gen10 Plus

HPE ProLiant MicroServer Gen10 Plus delivers an affordable compact yet powerful entry level server that you can customize for on-

. It is the most compact MicroServer that we have

sors

compute performance as well as security and remote management into the server with HPE iLO silicon root of

whether you want a general purpose

server, NAS or even a virtualization server, you will be surprised at how much you can get out of this small and affordable server.

HPE ProLiant MicroServer Gen10 Plus

Front View (External):

USB 3.2 Gen2 Type-A port

NIC status LED

USB 3.2 Gen2 Type-A port

Health LED

Drive activity LED

Power on/Standby button and system power LED

premises, hybrid cloud or even workloads demanding datacenter performance launched so far, which can be placed flat or vertically depending on your space. The latest Intel Xeon® E and Pentium® proces supported to deliver trust. Along with other enhancements such as 4x 1GbE onboard NICs and USB 3.2 Gen2 Type-A,

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Overview

Page 2

HPE ProLiant MicroServer Gen10 Plus

Front View (Internal):

Four (4) LFF NHP SATA HDD cage

USB 3.2 Gen2 Type-A ports

Hard drive screws

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Overview

Page 3

Rear View:

Padlock eye

Four (4) NIC ports (NIC1-4 from left)

Kensington security slot

Power clip hole (for the power cord clip to firmly secure the power adapter. Clip is by default installed)

Four (4) USB 3.2 Gen1 Type-A ports

Power jack

DisplayPort 1.0

PCIe Gen3 low-profile slot (PCIe x16)

VGA port

iLO Enablement Kit slot (1x iLO Dedicated NIC port)

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Overview

Page 4

HPE ProLiant MicroServer Gen10 Plus

Mainboard

Internal View:

Riser board connector

One (1) internal USB 2.0 Type-A port

iLO 5 chip onboard

TPM connector

One (1) processor and heatsink

System fan

Two (2) DDR4 UDIMM slots

Riser Board

Riser board – iLO Enablement Kit slot

Riser board – Expansion low-profile slot, PCIe3 x16

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Overview

Page 5

iLO Enablement Kit

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Standard Features

Page 6

Processor

effectiveness. This

Model

CPU Frequency

Cores

L3 Cache

Power

DDR4

SGX

Xeon E-2224

3.4 GHz

8 MB

71W

2666 MT/s

Pentium G5420

3.8 GHz

4 MB

54W

2400 MT/s

Chipset

For more information regarding Intel® chipsets, please see the following URL: http://www.intel.com/products/server/chipsets/

On System Management Chipset

Memory

Type

HPE Standard Memory DIMM Slots Available

Maximum Capacity

32GB (2 x 16GB UDIMM @2666 MT/s)

ECC

Network Controller

port NIC standard with the option to upgrade with a variety

of networking options.

Intel® Xeon® E Processor is designed to deliver the best combination of performance, built-in capabilities, and costproduct also supports Intel® Pentium® processors. Choose one of the following processors based on the model:

For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon

Intel Xeon E-2200 Series / 9th Gen Pentium G

Intel® C242 Chipset

HPE iLO 5 ASIC

NOTE:

MicroServer Gen10 Plus does not support remote management/ out-of-band management by default. The MicroServer Gen10 Plus iLO Enablement Kit (P13788-B21) must be installed to activate remote management. Without the iLO Enablement Kit, the server only supports in-band management features. The iLO Enablement Kit supports below features:

1) It acts as an activation key for remote management to the server

2) An iLO dedicated NIC port comes with the kit

3) The iLO 5 Essentials features are activated upon installing the enablement kit:

- Email-Based Alerting

- Integrated Remote Console (IRC/Virtual KVM - -- Supports text and graphics)

- Virtual Media via Integrated Remote Console

iLO support will follow same warranty term as the server itself. Read and learn more in the HPE iLO QuickSpecs

DDR4 Unbuffered (UDIMM)

NOTE: The maximum memory speed depends on processor model.

Memory Protection

Embedded Intel i350 AM41Gb 4-port network controller The HPE ProLiant MicroServer Gen10 Plus server offers the customer a 4-

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Standard Features

Page 7

Expansion Slots

ExpansionSlot #

Technology

Bus Width**

Connector

Width

Form Factor

Notes

PCIe 3.0

x 16

Low Profile

Supported on

Board

Storage Controller

kout

HPE Smart Array Gen10 Controllers Data Sheet.

Software RAID

mode only. For legacy support an additional controller will

source software to create

HPE Smart Array E208i-p SR Gen10 Controller

Internal Storage Devices

− None ship standard

Maximum Internal Storage

The maximum storage indicated is aligned with the current HDD & SSD option list supported. Maximum internal storage

supported would change with the server’s option support plan.

Interfaces

Video

1 Rear VGA port 1 Rear DisplayPort 1.0

USB 2.0 Type-A Ports

1 total (1 internal)

USB 3.2 Gen1 Type-A Ports

4 total (4 rear)

USB 3.2 Gen2 Type-A Ports

2 total (2 front)

Network RJ-45 (Ethernet)

Industry Standard Compliance

• SMBIOS 3.1

the PCIe Riser

The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed brea of the available Gen10 Smart Array controllers visit the

HPE Smart Array S100i SR Gen10 Software RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI

be needed

NOTE: The S100i only supports Windows. For Linux users, HPE offers a solution that uses in-distro open-

a two-disk RAID 1 boot volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/

Essential RAID Controller

• Hard Drives

− None ship standard

• Solid State Drives

• Non-hot plug SATA

− 16TB (4 x 4TB) 3.5" SATA HDD

− 960GB (4x 240GB) 2.5” SATA SSD

NOTE:

• ACPI V6.1 Compliant

• PCIe 3.0 Compliant

• PXE Support

• WOL Support

• EMC Class B

• Microsoft® Logo certifications

• VGA Port

• DP Port

QuickSpecs

HPE ProLiant MicroServer Gen10 Plus

Standard Features

Page 8

•

• SATA 6Gb/s

Server Power Cords

specific 6 ft/1.83m C5 power cords depending on models. If a

different power cord is required, please check the HPE Power Cords and Cables web page.

Power Supply

One (1) 180 Watts , non-redundant External Power Adapter

System Fans

One (1) non-redundant system fan shipped standard

Operating Systems and Virtualization Software Support for ProLiant Servers

premise solutions without sacrificing security and ease of

premise, and an Application Marketplace with over

allows you to build a fully functional server that is just right for you at no upfront cost. For more information

ProLiant Servers for OS and Virtualization Software and

https://www.hpe.com/us/en/servers/server-operating-systems.html.

Form Factor

Ultra Micro Tower

HPE Server UEFI/Legacy ROM

Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured

information, please visit http://www.hpe.com/servers/uefi.

UEFI 2.6

• Redfish API

• IPMI 2.0

• Advanced Encryption Standard (AES)

• Triple Data Encryption Standard (3DES)

• SNMP v3

• TLS 1.2

• DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)

• Active Directory v1.0

• ASHRAE A2

• UEFI (Unified Extensible Firmware Interface Forum)

• USB 2.0 Compliant

• USB 3.2 Compliant

All pre-configured models ship standard with one or more country-

• Microsoft Windows Server 2016 and 2019

• Red Hat Enterprise Linux (RHEL) 7.6, 7.7, 8.0, 8.1

• VMware ESXi 6.5 U3 and 6.7 U3

NOTE: VMware supported only with Intel® Xeon® E processors, not supported with Intel® Pentium® processors.

• ClearOS

HPE and ClearCenter will help you lower the cost of building onuse. HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive webbased graphical user interface that provides a cloud-like experience on100 apps and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow.

NOTE: ClearOS

on ClearOS, please visit http://www.hpe.com/servers/clearos.

For more information on Hewlett Packard Enterprise Certified and Supported latest listing of software drivers available for your server.

Unified configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.

NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more

+ 16 hidden pages