HPE 879513-B21, PERFDL180-002 Getting Started Guide

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Overview

Page 1

HPE ProLiant DL180 Gen10 Server

NOTE: The Proliant DL180 Gen10 is a limited edition server targeted for specific regions.

Please contact your local sales representative for additional information

Adaptable for diverse workloads and environments, the secure 2P 2U HPE ProLiant DL180 Gen10 delivers world-class compelling performance with the right balance of expandability and scalability. Designed for supreme versatility and resiliency with the right balance of reliability

while being backed by a comprehensive warranty make it ideal for multiple environments from Containers to Cloud to Big Data. Standardize on the industry’s most trusted compute platform. SMBs and enterprises running application.

8SFF Chassis - Front View

Quick removal access panel

UID button

8 SFF Drive Cage

USB 3.0

iLO Front Service Port

Serial label pull tag

Health LED

Box 1

NIC status

11.

Box 2

Power On/Standby button and system power LED button

Box 3

, manageability and performance,

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Overview

Page 2

8SFF Chassis – with optional 2nd CPU - Internal View

Fan cage shown with 6 Hot-swap fans

Connection for second (optional) riser (Requires second CPU)

DDR4 DIMM slots. Shown fully populated in 16 slots (8 per processor)

10 Power Supply(Non hot

Optional HPE Smart Storage Battery (Battery not shown)

Primary PCIe riser, standard

Drive Backplane Connector

Flexible Smart Array Connector

GPU Power Connector

Mini-SAS port 2

2 Processors, heatsink showing

Mini-SAS port 1

System Battery

Mini-SAS port 3

Internal USB 3.0 port

SATA Ports

-plug power supply shown)

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Overview

Page 3

Rear View

Primary Riser. PCI Slots (Slots 1-3 top to bottom, riser shipped standard, not shown)

VGA Port

Secondary Riser. PCI Slots (Slots 4-6top, not shown, requires second riser card, and second processor).

Dedicated iLO management port

Power Supply (Redundant Hot plug shown)

USB connectors 3.0 (2)

Embedded 2 x 1GbE Network Adapter

Platform Information

Form Factor

2U rack

Chassis Types

8 SFF

NOTE: All models come with the S100i Smart Array Controller with embedded software RAID support for 14 drives. However this

needs to be enabled using Enable SW RAID option (784308-B21) while configuring.

System Fans

Standard – fan types

Non-Redundant

Redundant

1P Model

3 fans

4 fans

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Standard Features

Page 4

Standard Features

Processors – Up to 2 of the following depending on model.

Intel Xeon Models

CPU

Cores

L3 Cache

Power

UPI

DDR4

Memory per

Silver Processors

Silver 4110 Processor

2.1 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

Bronze 3106 Processor

1.7 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2133 MT/s

768 GB

NOTE: Silver – 4100 Series - 2 Socket supports 2UPI @ 9.6 GT/s, 6-Channel DDR4 @ 2400 MHz providing up to 768 GB memory

bit FMA), 48 lanes PCIe 3.0,

Channel DDR4 @ 2133 MHz providing up to 768GB

memory capacity. Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.

Chipset

URL: http://www.intel.com/products/server/chipsets/

On System Management Chipset

NOTE:

iLO QuickSpecs

Memory

One of the following depending on model

Type:

HPE DDR4 SmartMemory,

Registered (RDIMM)

DIMM Slots Available

8 DIMM slots per processor, 6 channels per processor, 2 channels @ 2 DIMMs per channel, 4 channels @ 1 DIMM per channel

Maximum capacity (RDIMM)

256 GB

16 x 16 GB RDIMM @ 2666 MHz

NOTE: The maximum memory by socket is limited by the processor selection.

Memory Protection

: http://www.hpe.com/docs/memory-ras-feature.

NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.

Frequency

Bronze Processors

capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512standard RAS supported. NOTE: Bronze – 3100 Series - 2 Socket supports 2UPI @ 9.6 GT/s, supports 6-

Intel C622 Chipset

NOTE: For more information regarding Intel® chipsets, please see the following

HPE iLO 5 ASIC

Read and learn more in the

socket

Registered (RDIMM), HPE DDR4 Standard Memory,

For details on the HPE Server Memory Options RAS feature, visit

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Standard Features

Page 5

Expansion Slots

CPU1 x8x8x8 riser

Slots #

Technology

Bus

Width

Connector

Width

Slot Form Factor

Notes

PCIe 3.0

Full-height,

full-length slot

Proc 1

PCIe 3.0

Full-height,

half-length slot

Proc 1

PCIe 3.0

Full-height,

half-length slot

Proc 1

NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.

FlexibleLOM

Slots #

Technology

Bus

Width

Connector

Width

Slot Form Factor

Notes

PCIe 3.0

Full-height,

full-length slot

Proc 1

PCIe 3.0

Full-height,

half-length slot

Proc 1

PCIe 3.0

FlexibleLOM

Proc 1

NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector. NOTE: This riser is necessary to install FlexibleLOM adapters

CPU1 x16x8 riser

Slots #

Technology

Bus

Width

Connector Width

Slot Form Factor

Notes

PCIe 3.0

X16

Full-height,

full-length slot

Proc 1

PCIe 3.0

Full-height, half-

length slot

Proc 1

NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.

CPU2 x8x8x8 riser

Slots #

Technology

Bus

Width

Connector Width

Slot Form Factor

Notes

PCIe 3.0

Full-height,

Proc 2

PCIe 3.0

Full-height,

half-length slot

Proc 2

PCIe 3.0

Low profile

Proc 2

NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector. NOTE: When populating the second optional riser slot, the second processor must be installed.

full-length slot

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Standard Features

Page 6

Storage Controllers

kout

Software RAID

additional controller will

HPE Smart Array S100i SR Gen10 SW RAID only supports Windows and does not support Linux. For Linux users, HPE

disk RAID 1 boot volume. For more information

Essential RAID Controller

NOTE:

Internal Storage Devices

None ship standard

Maximum Internal Storage

Capacity

Configuration

Hot Plug SFF SAS

9.6 TB

8X1.2 TB

Hot Plug SFF SAS SSD

3.2 TB

8X400 Gb

Hot Plug SFF SATA SSD

3.8 TB

8X480 Gb

The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed brea of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet. One of the following depending on model

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. NOTE: The S100i uses 14 embedded SATA ports NOTE:

offers a solution that uses in-distro open-source software to create a twovisit: https://downloads.linux.hpe.com/SDR/project/lsrrb/

HPE Smart Array E208i-p SR Gen10 Controller HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.

One of the following depending on model

Optical Drive

Optional: DVD-ROM, DVD-RW

Hard Drives

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Standard Features

Page 7

Power Supply

less

efficiency operation and

size" a power supply for specific server configurations. This flexibility helps

14 jumper cord (A0K02A). This jumper cord is also included with

Interfaces

Video

1 rear – VGA Port (standard )

Network Ports

2 x 1 Gb ports shipping standard with optional Media Module, FlexibleLOM or stand up card

Management Network Port

1 Gb Dedicated

Front iLO Service Port

1 standard

Micro SD Slot

1 Micro SD

NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot while

the server is powered.

USB 3.0

Up to 4 total: 1 front, 2 rear, 1 internal (secure),

Operating Systems and Virtualization Software Support for ProLiant Servers

• SUSE Linux Enterprise Server 15

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, toolinstallation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for highoffer multiple power output options, allowing users to "rightto reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/Ceach standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HPE Power Advisor Tool. For information on power specifications and technical content visit HPE Server power supplies.

• Windows Server 2019 (Tested Only)

• Windows Server 2016

• VMware vSphere 6.0 U3

• VMware vSphere 6.5 U2

• VMware vSphere 6.7 U1

• Red Hat Enterprise Linux (RHEL) 6.9,

• Red Hat Enterprise Linux (RHEL) 7.6 (with Kbase)

• SUSE Linux Enterprise Server 12 SP4

QuickSpecs

HPE ProLiant DL180 Gen10 Server

Standard Features

Page 8

Industry Standard Compliance

tails regarding ambient temperatures, humidity and features support please

UEFI (Unified Extensible Firmware Interface Forum)

Graphics

• 4 Gbit DDR 3 with ECC protection

HPE Server UEFI/Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured

ss 2

Based Setup Utility (RBSU) of legacy BIOS. For more

• Workload Profiles for simple performance optimization

ACPI 6.1 Compliant PCIe 3.0 Compliant WOL Support Microsoft® Logo certifications PXE Support USB 3.0 Compliant (internal) SMBIOS 3.1 UEFI 2.6 Redfish API IPMI 2.0 Secure Digital 2.0 Advanced Encryption Standard (AES) Triple Data Encrytion Standard (3DES) SNMP v3 TLS 1.2 DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP) Active Directory v1.0 ASHRAE A3/A4

NOTE: For additional technical thermal de

visit: http://www.hpe.com/servers/ashrae.

DL160/DL180 info not published.

Integrated Video Standard

• Video modes up to 1920 x 1200@60Hz (32 bpp)

• 16MB Video Memory

HPE iLO 5 on system management memory

• 32 MB Flash

configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Cla implementation and support both UEFI Mode (default) and Legacy BIOS Mode.

NOTE: The UEFI System Utilities tool is analogous to the HPE ROMinformation, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot and Secure Start enable for enhanced security

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant

• PXE boot support for IPv6 networks

+ 17 hidden pages