QuickSpecs
HPE G2 Enterprise Series Racks
Overview
Page 1
HPE G2 Enterprise Series Racks
HPE G2 Enterprise Series Racks are designed for high density IT configurations deployed in a diverse set of environments – from
the data closet to the data center
to support a wide range of HPE IT equipment (servers, storage, and networking), as well as the entire portfolio HPE Rack and Power
Infrastructure solutions (PDU, UPS and KVM).
All HPE G2 Enterprise
replacement of the rack
such as a fully
lbs. Additionally, select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks
with up to 3,00
The G2 Enterprise
HPE
user’s IT environment. Rack accessories include options to support
stability.
. Following EIA-310 specifications for 19-inch racks, G2 Enterprise Racks are designed specifically
Series Racks are supported with a 10 year limited warranty that provides either repair or complete
. Offering this industry-leading warranty requires a highly reliable and durable design that includes features
-welded, roll-form rack design, heavy-gauge rails, and heavy-duty castors that can support a static load of up to 3000
0 lbs. of It equipment.
Series Rack portfolio includes a wide range of rack models covering a variety of heights, widths, and depths. All
G2 rack models are supported with a large portfolio of accessories that help customize each rack to operate optimally in in the
airflow management, cable management, and added rack
QuickSpecs
HPE G2 Enterprise Series Racks
Overview
Page 2
QuickSpecs
HPE G2 Enterprise Series Racks
Rack Models
Page 3
HPE G2 Enterprise Series Rack Models
Review the following details to better understand the different rack models that are offered in the HPE G2 Enterprise Series rack
portfolio.
Pallet Rack
Standard pallet and packaging for racks that will be configured on-site
Shock Pallet
Pallet and packaging designed to support racks that will be shipped directly to the data center fully
• Must be selected when requesting HPE Factory Express Services
Network Racks
Designed to support dense Networking equipment configurations, or the integration of Networking,
bundles
600mm Wide G2 Enterprise Series Rack Models
HPE 42U 600x1075 Enterprise G2 Pallet Rack
P9K37A
HPE 42U 600x1075 Enterprise G2 Shock Rack
P9K38A
HPE 42U 600x1200 Enterprise G2 Pallet Rack
P9K39A
HPE 42U 600x1200 Enterprise G2 Shock Rack
P9K40A
HPE 48U 600x1075 Enterprise G2 Shock Rack
P9K50A
HPE 48U 600x1200 Enterprise G2 Pallet Rack
P9K51A
HPE 48U 600x1200 Enterprise G2 Shock Rack
P9K52A
800mm Wide G2 Enterprise Series Rack Models
HPE 42U 800x1075 Enterprise G2 Pallet Rack
P9K41A
HPE 42U 800x1075 Enterprise G2 Shock Rack
P9K42A
HPE 42U 800x1200 Enterprise G2 Pallet Rack
P9K45A
HPE 42U 800x1200 Enterprise G2 Shock Rack
P9K46A
HPE 48U 800x1075 Enterprise G2 Shock Rack
P9K54A
HPE 48U 800x1200 Enterprise G2 Pallet Rack
P9K57A
HPE 48U 800x1200 Enterprise G2 Shock Rack
P9K58A
G2 Enterprise Series Network Rack Models
HPE 42U 800x1075 Enterprise G2 Network Pallet Rack
P9K43A
HPE 42U 800x1200 Enterprise G2 Network Shock Rack
P9K48A
HPE 48U 800x1075 Enterprise G2 Network Pallet Rack
P9K55A
HPE 48U 800x1200 Enterprise G2 Network Shock Rack
P9K60A
configured
• Can support up to 3,000 lbs. of IT equipment during shipment
• Packaging includes integrated ramp to simplify rack deployment
Server, and Storage equipment into a single industry standard 19” rack.
• Front and rear vertical EIA rails are moved back 75mm to facilitate front to rear cabling
• Include additional bristle covered cable access slots in the front and top of the rack to prevent
the mixing of hot and cold air and to allow pass-through for large cable connectors and
QuickSpecs
HPE G2 Enterprise Series Racks
Standard Features
Page 4
What’s Included With
•
• Support documentation
NOTE: Side panels and baying kit must be purchased separately for all G2 Enterprise rack models.
Compatibility
•
• Includes adjustable EIA rails
Reliability/
•
• High-strength steel side bracing
Usability/
•
• Configuration services through HPE Factory Express
Safety/Security
•
• Single key access for front doors, rear doors, and side panels
Industry Standards
EIA
Type A cabinet per section 4.1.1
UL/CES Certification
Yes
WEEE
Yes
RoHS compliant
Yes
TAA compliant
Compliant for all rack models sold in North America
Rack?
Durability
Management
Hardware Kit (including key to front and rear doors)
Designed to EIA-310 specifications for industry standard racks
• Designed for HPE IT solutions
• Integration with HPE rack and power infrastructure solutions
10 year limited warranty. Hardware replacement and repair is available for ten years from date
of purchase.
• Proven frame design, heavy-gauge mounting rails, and heavy-duty casters can support up to
3000 lbs. static load and dynamic (rolling) loads.
• Highest levels of ship-load testing to ensure a dynamic load of up to 3000 lbs. when selecting
a shock pallet rack option
• Fully-welded, roll form rack frame
Industry's widest range of enclosure sizes with rack depths of 42-inches or greater
• Multiple 800mm wide rack models including Network rack models available
• Includes either 2 (1075mm models) or 4 (1200mm models) integrated and adjustable full-
height PDU Mounting Trays in each rack to support PDU and cable management accessories
• 80% front-door airflow perforation
• Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy
pass-through of large cables and connectors
• Enhanced front and rear door cabling channels
• Redesigned bottom area designed for unobstructed access to data center floor
• Depth adjustable, side EIA mounting rails designed to support front-to-back cabling
• Flush-mounted, locking 2-piece side panels (optional) – supports baying with side panels
installed
• Quick release front and rear doors
• Wide array of rack accessories for airflow management, cable management, stabilization, and
safety/security
• Eyebolt support integrated into enclosure frame
Industry standard lock panel on the front and rear doors capable of supporting a wide range of
third-party electronic locking/security solutions
• Flush-mounted side panels that support rack baying when installed
• Optional electrical grounding covering frame and components
Compliance
QuickSpecs
HPE G2 Enterprise Series Racks
Service & Support
Page 5
Warranty / Service
HPE G2 Enterprise Racks are covered by a global 10 warranty and supported by HPE Services and
a worldwide network of HPE Authorized Channel Partners resellers. Hardware replacement and
repair is available for ten y
Additional information regarding worldwide limited warranty and technical support is available at:
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/index.aspx#.V
10xE3rvbq
HPE Support Services
HPE Services
To help streamline implementation and enhance ongoing support of rack solution
Packard Enterprise provides
to complement customers’ in
Installation and Startup services
Take advantage of complete installation and implementation support
capabilities
Server
Cover rack options with a single convenient service package.
mounted ProLiant DL servers and storage products prov
hardware options that are qualified for inclusion with the server at the time of or after purchase.
This covers all rack and power infrastructure options including power distribution units (PDU),
options up to
switches. All of these products
server at
HPE
13x5 basis. Both options feature same
hour onsite assistance when service issues cannot be
resolved remotely. And both help enhance the return on server investment with proven
Services expertise and consistent support levels across geographically dispersed sites.
Coverage
ears from date of purchase. Normal HPE warranty exclusions apply.
-
s, Hewlett
cost-effective service options with resources and specialized expertise
-house capabilities.
-including global rollout
-to get rack solutions up-and-running rapidly, with minimal business disruption.
Option Hardware Support
HPE Support Services for rack-
ide support for all HPE-branded rack
12kVA (not including battery), rack and rack accessories, and KVM consoles and
are covered at the same service level and for the same period as the
no additional cost.
Support Services help increase uptime and productivity with rapid response on a 24x7 or
-day, 4-
UPS
HPE
QuickSpecs
HPE G2 Enterprise Series Racks
Related Options
Page 6
Hewlett Packard Enterprise offers a full line of accessories and options that can be added to HPE Racks allowing you to customize
each rack to fit your IT requirements.
kits, drawers, shelving, and filler panels. To build a complete rack and power infrastructure for your IT environment,
Packard Enterprise also offers
(UPS), and KVM (keyboard, video, mouse) consoles and switches.
information at:
NOTE: 0D1 may appear after the above selected part numbers on yours sales order if factory integration is indicated.
Rack Baying Kits
HPE G2 Rack Baying Kit
P9L12A
NOTE: This Baying Kit is used to connect HPE G2 racks of the same U height
and depth together and includes the following components: (4) 24
brackets, (4) 600mm baying brackets, and T-30 Torx screws.
Airflow Optimization
HPE Air Flow Optimization Kit
BW930A
NOTE: The Airflow Optimization kit seals air gaps inside the rack, in between
bayed racks, and the clearance from the floor to the rack to prevent hot and
cold air from mixing thus optimizing the temperature at which the chilled air
enters the racked servers.
NOTE:
kit will automatically ship with the rack. This kit is recommended for all other
bayed rack configurations also.
Sidewall Panel Kits
HPE G2 Rack 42U 1075mm Side Panel Kit
P9L15A
HPE G2 Rack 42U 1200mm Side Panel Kit
P9L16A
HPE G2 Rack 48U 1075mm Side Panel Kit
P9L17A
HPE G2 Rack 48U 1200mm Side Panel Kit
P9L18A
NOTE: HPE G2 Rack Side Panel Kits are locking, 2-piece panels that provide
coverage for both sides of the rack.
NOTE:
must be purchased separately.
Rack Stabilization
Kits
HPE 600mm Rack Stabilizer Kit
BW932A
HPE 600mm Heavy Duty V2 Stabilizer Kit
BW961A
HPE 800mm Rack Stabilizer Kit
BW933A
NOTE: Anti-tip stabilizer kits provide stability and support when equipment is
installed, removed or accessed within the rack. Heavy Duty stabilizer kits
should be used when a single racked component exceeds 200 lbs.
HPE Rack Ballast Kit
120672-B21
NOTE: The Ballast Kit is designed to provide additional stability and support
when used with the Stabilizer Kit. It is typically used when very heavy
equipment is routinely installed, removed or accessed within the rack.
Compatible with HPE Advanced and Enterprise Series racks.
Tie Down Kit
HPE 600mm Rack Tie Down Kit
AF076A
HPE 800mm Rack Tie Down Kit
BW927A
NOTE: The Rack Tie Down Kit is used to secure the rack to the datacenter
floor.
Part number AF076A is used for 600mm wide racks only.
Universal 1U
Filler Panels
HPE 1U 10-pack Black Universal Filler Panel
BW928A
HPE 1U 100-pack Black Universal Filler Panel
BW929A
HPE Rack accessories include upgrades such as side panels, baying kits, cable management
Hewlett
a full line of options that include power distribution units (PDU), uninterruptible power systems
See HPE Rack and Power Infrastructure for more complete
http://www.hpe.com/info/rackandpower
-inch baying
When configuring racks through Factory Express, a Rack Optimization
Side Panel kits are not included with G2 Enterprise rack models and
QuickSpecs
HPE G2 Enterprise Series Racks
Related Options
Page 7
NOTE: Blanking panels are made from high grade molded plastic, and are
designed to be installed without tools. The use of blanking panels is
recomm
Rack Shelves
HPE Rack 1U Monitor Utility Shelf
253449-B21
NOTE: This is a 1U fixed shelf that can be mounted at any height to place a
monitor or other component within the rack. The shelf has a maximum weight
capaci
monitor.
HP 100kg Sliding Shelf
234672-B21
Adjustable Rails
Depth Adjustable Fixed Rail Kit
332558-B21
NOTE: This kit contains two depth adjustable rails that allow Hewlett Packard
Enterprise servers, storage, UPSs and other products to be mounted in HPE or
third-party racks. Maximum weight capacity is 300 lbs. (136 kg).
Rack Light Kit
HPE Rack LED Light Kit
BW939A
NOTE: The Rack Light Kit is mounted under the roof of the rack and is used to
illuminate the rear section of the rack. The light is turned on and off with the
opening and closing of the rear doors.
Locking Drawer
HPE 2U Universal Locking Drawer
361591-B21
NOTE: This rack accessory mounts on HPE Advanced and Enterprise Series
racks with sliding rails and is used to store CD's, instruction manuals, tools, and
any other items that are frequently used at the rack. Drawer includes lock.
Cable Management
Kits
HPE Quarter Turn Hook and Loop 10 Pack Kit
BW963A
HPE Quarter Turn Hook and Loop 100 Pack Kit
BW964A
NOTE: Quarter turn hook and loop straps help attach cables and other devices
to the accessory bracket in the rear of the rack without tools.
Cable Management D-ring Kit
168233-B21
NOTE: This kit consists of 10 "D" rings that can be used for cable management.
HPE Rack Cable Management Velcro Clips
379820-B21
HPE Rack Cable Management Kit
AF099A
NOTE: The HPE Rack Cable Management Kit includes a 1U and 2U front cable
entry panel with brush inser
hook and loop straps (8 inch), 10x hook and loop straps (10 inch), and
mounting hardware.
Rack Top Cable
Trays
HPE 600 Wide Rack Top Cable Tray
383982-B21
HPE 800 Wide Rack Top Cable Tray
383983-B21
HPE Rack Top Cable Mgmt Transfer Tray
383984-B21
NOTE: HPE Rack Top Cable Tray connects two aisles of racks with HPE Rack
Top Cable Trays to run overhead cables.
Rack Fan Kits
HPE Rack 110V Roof Mount Fan Kit
257413-B21
HPE Rack 220V Roof Mount Fan Kit
257414-B21
NOTE: The Rack Fan Kits enhance natural convection cooling by increasing
airflow in the rack.
Grounding Kit
HPE G2 Rack Grounding Kit
P9L11A
NOTE: The Rack Grounding Kit can be used to reduce the level of
electromagnetic emissio
Straps, (3) 14.5” Grounding Straps, (
14.5” Grounding Straps w/connectors.
ended to ensure proper airflow.
ty of 150 lbs. (68kg) and ships with bezels for both a 15” and 17”
ts, 2x crossover cable brackets, 10x D-rings, 10x
ns outside the rack. The Kit includes (2) 6” Grounding
4) 6” Grounding Straps w/connectors, (4)
QuickSpecs
HPE G2 Enterprise Series Racks
Related Options
Page 8
Hardware Kit
HPE Rack Hardware Kit
H6J85A
NOTE: The HPE Rack Hardware Kit includes 24x M6 cage nuts, 24x M6x16
T25 screws, 10x 5mm thread clip nuts, 10x 6mm thread clip nuts, cage nut
tool, and 5x Quarter turn hook and loop straps.
Rack Branding Kit
HPE Custom Door Branding Kit
BW935A
NOTE: Blank panel that allows you to customize the rack with rack location
information, branding, or other description information.
HPE Support
Services
HPE Install Rack and Rack Options Service
U2871E
HPE Factory Express
Services
HPE Hardware Customization Service
HA838A1
HPE 3rd Party Hardware Install Service
HA844A1
HPE Customer Defined Rack Cable Labeling Service
HA850A1
HPE Customer Furnished Equipment Handling Service
HA851A1
HPE Custom Placement within Rack Service
HA864A1
NOTE: HPE Factory Express offers a full line of services. For more information
visit http://www.hp.com/go/factoryexpress.
QuickSpecs
HPE G2 Enterprise Series Racks
Technical Specifications
Page 9
Rackable/Useable Area
Total Area
Model
Height
Width
Depth
Total Cabinet Area
Shipping Dimensions
P9K37A
42U
600mm
1075mm
78.98 x 44.30 x 23.54 in
(200.66 x 112.52 x 59.78 cm)
84.17 x 47.24 x 27.95 in
(213.79 x 120.00 x 71.00 cm)
P9K38A
42U
600mm
1075mm
78.98 x 44.30 x 23.54 in
(200.66 x 112.52 x 59.78 cm)
85.35 x 50.87 x 35.43 in
(216.79 x 129.20 x 89.99 cm)
P9K39A
42U
600mm
1200mm
78.98 x 51.19 x 23.54 in
(200.66 x 130.02 x 59.78 cm)
84.65 x 52.92 x 27.95 in
(215.00 x 139.50 x 71.00 cm)
P9K40A
42U
600mm
1200mm
78.98 x 51.19 x 23.54 in
(200.66 x 130.02 x 59.78 cm)
85.82 x 57.87 x 35.43 in
(218.00 x 146.99 x 89.99 cm)
P9K41A
42U
800mm
1075mm
78.98 x 44.30 x 31.34 in
(200.66 x 112.52 x 79.78 cm)
84.17 x 47.24 x 35.83 in
(213.79 x 120.00 x 91.00 cm)
P9K42A
42U
800mm
1075mm
78.98 x 44.30 x 31.34 in
(200.66 x 112.52 x 79.78 cm)
85.35 x 50.87 x 43.43 in
(216.79 x 129.20 x 110.31 cm)
P9K43A
42U
800mm
1075mm
78.98 x 44.30 x 31.34 in
(200.66 x 112.52 x 79.78 cm)
85.35 x 50.87 x 43.43 in
(216.79 x 129.20 x 110.31 cm)
P9K45A
42U
800mm
1200mm
78.98 x 51.19 x 31.34 in
(200.66 x 130.02 x 79.78 cm)
84.17 x 54.84 x 35.83 in
(218.80 x 139.30 x 91.00 cm)
P9K46A
42U
800mm
1200mm
78.98 x 51.19 x 31.34 in
(200.66 x 130.02 x 79.78 cm)
85.35 x 57.87 x 43.43 in
(216.79 x 146.99 x 110.31 cm)
P9K48A
42U
800mm
1200mm
78.98 x 51.19 x 31.34 in
85.35 x 57.87 x 43.43 in
P9K50A
48U
600mm
1075mm
90.39 x 44.30 x 23.54 in
97.64 x 50.87 x 35.43 in
P9K51A
48U
600mm
1200mm
90.39 x 51.19 x 23.54 in
(229.78 x 130.02 x 59.78 cm)
97.64 x 57.87 x 35.43 in
(248.01 x 146.99 x 89.99 cm)
P9K52A
48U
600mm
1200mm
90.39 x 51.19 x 23.54 in
(229.78 x 130.02 x 59.78 cm)
97.64 x 57.87 x 35.43 in
(248.01 x 146.99 x 89.99 cm)
P9K54A
48U
800mm
1075mm
90.39 x 44.30 x 31.34 in
(229.78 x 112.52 x 79.78 cm)
97.64 x 50.87 x 43.43 in
(248.01 x 129.20 x 89.99 cm)
P9K55A
48U
800mm
1075mm
90.39 x 44.30 x 31.34 in
(229.78 x 112.52 x 79.78 cm)
97.64 x 50.87 x 35.43 in
(248.01 x 129.20x 89.99 cm)
P9K57A
48U
800mm
1200mm
90.39 x 51.19 x 31.34 in
(229.78 x 130.02 x 79.78 cm)
97.64 x 57.87 x 35.43 in
(248.01 x 146.99 x 89.99 cm)
P9K58A
48U
800mm
1200mm
90.39 x 51.19 x 31.34 in
(229.78 x 130.02 x 79.78 cm)
97.64 x 57.87 x 43.43 in
(248.01 x 146.99 x 110.31 cm)
P9K60A
48U
800mm
1200mm
90.39 x 51.19 x 31.34 in
(229.78 x 130.02 x 79.78 cm)
97.64 x 57.87 x 43.43 in
(248.01 x 146.99 x 110.31 cm)
Understanding rack
weights and loads
HPE G2 Enterprise Series Racks are designed to support high capacity weight loads that include the
weight of the rack and all the equipment insta
HPE G2 Enterprise
can be shipped when fully loaded with equipment, pleas
that can support up to 3,00
(200.66 x 130.02 x 79.78 cm)
(229.78 x 112.52 x 59.78 cm)
• Shipping Weight - rack including shipping packaging and materials.
• Static Load – maximum loaded weight that a rack can support when stationary.
• Dynamic Load (Rolling) – maximum loaded weight a rack can support when rolled.
• Dynamic Load (Shipping) – maximum loaded weight a rack can support when shipped
configured with IT equipment
lled. Weight loads are defined as:
(216.79 x 146.99 x 110.31 cm)
(248.01 x 129.20 x 89.99 cm)
Series Racks are rated for Static Loads of up to 3000 lbs. If you require a rack that
e consider purchasing a Shock Pallet model
0 lbs. during shipment.
QuickSpecs
HPE G2 Enterprise Series Racks
Technical Specifications
Page 10
Model
Rack
Height
Rack
Weight (lbs)
Shipping
Weight (lbs)
Static
Load
Dynamic (Rolling)
Load
Dynamic
(Shipping) Load*
P9K37A
42U
228.18
(103.50 kg)
257.94
(117.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K38A
42U
230.38
421.08
3,000 lbs.
3,000 lbs.
3,000 lbs.
P9K39A
42U
249.12
(113.00 kg)
281.09
(127.50 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K40A
42U
251.33
(114.00 kg)
456.36
(207.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K41A
42U
293.44
(133.10 kg)
326.50
(148.10 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K42A
42U
295.66
(134.10 kg)
499.57
(226.60 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K43A
42U
293.44
(133.10 kg)
326.50
(148.10 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K45A
42U
300.93
336.20
3,000 lbs.
3,000 lbs.
P9K46A
42U
303.14
(137.50 kg)
522.50
(237.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K48A
42U
303.14
522.50
3,000 lbs.
3,000 lbs.
3,000 lbs.
P9K50A
48U
252.43
(114.50 kg)
443.13
(201.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K51A
48U
272.27
(123.50 kg)
304.24
(138.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K52A
48U
274.46
480.61
3,000 lbs.
3,000 lbs.
3,000 lbs.
P9K54A
48U
304.24
(138.00 kg)
509.27
(231.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K55A
48U
302.03
335.10
3,000 lbs.
3,000 lbs.
P9K57A
48U
319.67
540.13
3,000 lbs.
3,000 lbs.
P9K58A
48U
321.88
(146.00 kg)
542.34
(246.00 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
3,000 lbs.
(1,361 kg)
P9K60A
48U
321.88
542.34
3,000 lbs.
3,000 lbs.
3,000 lbs.
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and
recycling programs, in many geographic areas, for our products. Products
returned to Hewlett Packard Enterprise will be r
disposed of in a responsible manner.
http://www.hpe.com/recycle
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by tre
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise web site. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard
Enterprise OEM customers
Enterprise equipment.
http://www.hpe.com/recycle
(104.50 kg)
(136.50 kg)
(137.50 kg)
(124.50 kg)
(191.00 kg)
(152.50 kg)
(237.00 kg)
(218.00 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(137.00 kg)
(145.00 kg)
(146.00 kg)
(152.00 kg)
(245.00 kg)
(246.00 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
(1,361 kg)
ecycled, recovered or
atment facilities.
who integrate and re-sell Hewlett Packard
QuickSpecs
HPE G2 Enterprise Series Racks
Summary of Changes
Page 11
Date
Version History
Action
Description of Change
27-Mar-2017
Version 1
Added
New QuickSpecs.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterpri
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or ed
a00002907
se products and
itorial errors or omissions contained herein.
- 15862 - Worldwide - V1 - 27-March-2017
Loading...