HPE G2 Advanced Series Racks
Overview
HPE G2 Advanced Series Racks
HPE G2 Advanced Series Racks are designed for low-to-medium density IT configurations deployed in a diverse set of
environments
designed specifically to support a wide range of HPE IT equipment (servers, storage, and networking), as well as the entire p
HPE Rack and Power Infrastructure solutions (PDU, UPS and KVM).
All HPE G2 Advanced Series Racks are
replacement of the rack
such as a fully
lbs. Additionally, select shock pallet models include packaging specifically designed to support the shipment of pre-configured racks
with up to 2,250 lbs.
The G2 Advanced Series Rack portfolio includes a wide range of rack models covering a variety of heights, widths, and depths.
simplify purchasing and installation, all rack models include locking side panels and baying kits. Additionally, HPE
portfolio of rack accessories that support airflow management, cable management, and added rack stability.
– from the data closet to the data center. Following EIA-310 specifications for 19-inch racks, G2 Advanced Racks are
ortfolio
supported with a 10 year limited warranty that provides either repair or complete
. Offering this industry-leading warranty requires a highly reliable and durable design that includes features
-welded, roll-form rack design, heavy-gauge rails, and heavy-duty castors that can support a static load of up to 3000
of It equipment.
To
offers a large
HPE Advanced Series Racks
HPE Advanced Series Racks
Rack Models
HPE G2 Advanced Series Rack Models
Review the following details to better understand the different rack models that are offered in the HPE G2 Advanced Series rack
portfolio.
Standard pallet and packaging for racks that will be configured on-site
Pallet and packaging designed to support racks that will be shipped directly to the data center fully
• Must be selected when requesting HPE Factory Express Services
Designed to support dense Networking equipment configurations, or the integration of Networking,
600mm Wide G2 Advanced Series Rack Models
HPE 22U 600mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 22U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 36U 600mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 36U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 42U 600mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 42U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 42U 600mmx1200mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 42U 600mmx1200mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 48U 600mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
800mm Wide G2 Advanced Series Rack Models
HPE 42U 800mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 42U 800mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 42U 800mmx1200mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
HPE 42U 800mmx1200mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
HPE 48U 800mmx1075mm G2 Kitted Advanced Pallet Rack with Side Panels and Baying
G2 Advanced Series Network Rack Models
HPE 42U 800mmx1075mm G2 Kitted Advanced Network Pallet Rack
HPE 42U 800mmx1200mm G2 Kitted Advanced Shock Network Rack with Side Panels and Baying
configured
• Can support up to 2,250 lbs. of IT equipment during shipment
• Packaging includes integrated ramp to simplify rack deployment
Server, and Storage equipment into a single industry standard 19” rack.
• Front and rear vertical EIA rails are moved back 75mm to facilitate front to rear cabling
• Include additional bristle covered cable access slots in the front and top of the rack to prevent
the mixing of hot and cold air and to allow pass-through for large cable connectors and
HPE Advanced Series Racks
Standard Features
• Include adjustable EIA rails
• High-strength steel side bracing
• Configuration services through HPE Factory Express
• Single key access for front doors, rear doors, and side panels
Type A cabinet per section 4.1.1
Rack?
Durability
Complete set of 4-piece locking side panels
• Baying kit
• Hardware Kit (including key to front and rear doors)
Designed to EIA-310 specifications for industry standard racks
• Designed for HPE IT solutions
• Integration with HPE rack and power infrastructure solutions
10 year limited warranty. Hardware replacement and repair is available for ten years from date
of purchase.
• Proven frame design, heavy-gauge mounting rails, and heavy-duty casters can support up to
3000 lbs. static loads and up to 2250 lbs. dynamic (rolling) loads
• Highest levels of ship-load testing to ensure a dynamic load of up to 2250 lbs. when selecting
a shock pallet rack option
• Fully welded, roll form rack frame
Management
Industry's widest range of enclosure sizes with rack depths of 42-inches or greater
• Side panels and baying kit included with all G2 Advanced Series rack models
• Multiple 800mm wide rack models including Network rack models available
• Includes either 2 (1075mm models) or 4 (1200mm models) integrated and adjustable full-
height PDU Mounting Trays in each rack to support PDU and cable management accessories
• 80% front-door airflow perforation
• Removal and reversible rack canopy with pre-installed brush strips capable of supporting easy
pass-through of large cables and connectors
• Enhanced front and rear door cabling channels
• Redesigned bottom area designed for unobstructed access to data center floor
• Depth adjustable, side EIA mounting rails designed to support front-to-back cabling
• Flush-mounted, locking 2-piece side panels
• Quick release front and rear doors
• Wide array of rack accessories for airflow management, cable management, stabilization, and
safety/security
• Eyebolt support integrated into enclosure frame
Industry standard lock panel on the front and rear doors capable of supporting a wide range of
third-party electronic locking/security solutions
• Flush-mounted side panels that support rack baying when installed
• Optional electrical grounding covering frame and components
Compliance