
HPE ProLiant ML110 Gen10 Server
Overview
HPE ProLiant ML110 Gen10 Server
The HPE ProLiant ML110 Gen10 delivers a performance that meets the growing needs of the SMB. The server is a single
processor,
manageability. The
ons
and workloads and addresses
with this right-sized compute.
Front View (details for 8LFF and 16SFF)
4.5U Tower Server that is designed to provide enterprise class features such as redundancy, reliability, and
server delivers the right size Tower with performance and expandability that covers a wide range of applicati
our customers from SMB to enterprise class server ROBO environments. Accelerate your business

HPE ProLiant ML110 Gen10 Server
PCIe3.0 Slots (Slots 1-5)
Power supply power connection

HPE ProLiant ML110 Gen10 Server
System Fan (92x32mm default)
One (1) processor and heatsink
PCIe fan (92x32mm default)
Five (5) PCIe3.0 expansion slots
Internal USB 2.0 connector
Internal USB 3.0 connector

HPE ProLiant ML110 Gen10 Server
• Intel® Xeon® Scalable processors , up to 14 cores, up to 105W
• Redundant Fan Kit (optional)
• Support up to 8 LFF NHP SATA HDDs
• HPE DDR4 SmartMemory up to 2666 MT/s
• Security features: iLO 5 (Security Root of Trust)
•
• NVIDIA Quadro P2000 GPU Module (optional)
• HPE 12TB SAS/ SATA 7.2K LFF HDD

HPE ProLiant ML110 Gen10 Server
Platform Information
1 Default system fan module (92 x 32 mm)
4. When the system requirements are to meet the A3 extended operating environment.
Sliding Shelf - 874578-B21 is optional to support rack form factor.
1 Default PCIe fan module (92 X 32 mm)
NOTE: When one of the following scenarios occurs, the server requires a Redundant Fan with a 800W
Redundant Power Supply to be installed.
1. When a second HDD cage is installed and the SAS HDDs are running at 15K RPM.
2. When a SAS SSD is installed.
3. If one fan fails, the system will be required to continue operating with a Redundant Fan. This
condition is indicated by a flashing amber Health LED.

HPE ProLiant ML110 Gen10
Standard Features
Processors – One of the following depending on model.
NOTE: Gold – 5100 Series - Supports 6-Channel DDR4 @ 2400 MT/s of SKU 5120 and @2666 MT/s of SKU 5122 providing up
512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
On System Management Chipset
NOTE: Read and learn more in the iLO QuickSpecs.
HPE SmartMemory and Standard Memory
DDR4 Registered (RDIMM)
6 DIMM slots per processor, 6 channels per processor, 1 DIMM per
channel
6 x 32 GB RDIMM @ 2666 MT/s
NOTE: LRDIMM is not qualified by this server. This server does not support mixing LRDIMMs and RDIMMs. Attempting to
For details on the HPE Server Memory Options RAS feature, visit: http://www.hpe.com/docs/memory-ras-feature.
NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
Intel Xeon Models
CPU
Frequency
Cores L3 Cache Power UPI DDR4
Memory
per socket
to 192 GB memory capacity. Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit
FMA) (SKU 5122 supports 2x 512 bit FMA), 48 lanes PCIe 3.0, advanced RAS supported.
NOTE: Silver – 4100 Series -6-Channel DDR4 @ 2400 MT/s providing up to 192 GB memory capacity. Intel Turbo Boost
Technology, Intel Hyper-Threading Technology, Intel AVX-512(1x 512-bit FMA), 48 lanes PCIe 3.0, standard RAS supported.
NOTE: Bronze – 3100 Series - Supports 6-Channel DDR4 @ 2133 MT/s providing up to 192GB memory capacity. Intel AVX-
mix any combination of these DIMMs can cause the server to halt during BIOS installation. All memory installed in the server
must be of the same type.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
Page

HPE ProLiant ML110 Gen10 Server
Full-height,
half-length slot
Full-height,
full-length slot
Full-height,
half-length slot
Full-height,
half-length slot
NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.
Hence Slot 2 and Slot 5 will be least recommended for usage.
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
One of the following depending on model
HPE Smart Array S100i SR Gen10 SW RAID
NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional
volume. For more information visit: https://downloads.linux.hpe.com/SDR/project/lsrrb/
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01367-B21-B21) which is sold separately.
Internal Storage Devices
One of the following depending on model
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: Optical is optional in BTO models.
Up to 8 Non-hot plug SATA 3.5-inch drives
the HPE SFF HDD Blank Kit. These part numbers for single HDD blanks
¾ length
NOTE: Although the Speed of slot is designed for 32Gb/s, the actual running speed will be lower than it was designed.
controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. For enabling please select HPE
FIO Enable Smart Array SW RAID (784308-B21).
NOTE: The S100i supports 10 ports as 2 additional ports are leveraged to support the M.2 option.
NOTE: For Linux users, HPE offers a solution that uses in-distro open-source software to create a two-disk RAID 1 boot
Controller
Controller
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks
installed. The 4LFF configurations includes 3 blanks and 8SFF includes 7
blanks. Additional hard drive blanks can be ordered using either P/N
807878-B21 for the HPE LFF HDD Blank Kit or P/N 666987-B21 for

HPE ProLiant ML110 Gen10 Server
below are also provided should you require replacement HDD blanks
8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16
HPE ML110 Gen10 350W ATX Power Supply Kit
HPE ML110 Gen10 550W ATX Power Supply Kit
NOTE: ATX power supply will not support redundant fan option.
HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class
Essential-series rack and tower servers.
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
For information on power specifications and technical content visit HPE Server power supplies.
1 standard ( at system rear)
2 standard ( at system rear)
Serial
1 optional ( at system rear)
1 standard (at system rear)
for your server.
NOTE: NHP SATA is limited to S100i controller.
4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8
efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been
designed specifically for HPE ProLiant Gen10 Essential Series servers.
The HPE 550W ATX Power Supply is the standard, non-redundant AC power supply option for most HPE ProLiant Gen10
Essential servers. It features Silver-level (88%) certified power efficiency with a set of features optimized for the Gen10
connector.
NOTE: The 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit requires the RPS Enablement Kit.
The RPS Enablement kit will support two power supplies.
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation
and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This
flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please
check the ProLiant Power Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.

HPE ProLiant ML110 Gen10 Server
1 standard (at system front)
1 standard (at system internal)
NOTE: The MicroSD slot is not hot-pluggable, please power down server before installation or removal.
5 (2 front, 2 rear, 1 internal)
3 (2 rear, 1 internal)
Operating Systems and Virtualization Software Support for ProLiant Servers
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
HPE and ClearCenter will help you lower the cost of building on-premise solutions without sacrificing security and ease of use.
and growing. Whether you’re starting out or scaling, you decide what applications you need and pay as you grow.
NOTE:
For more information on ClearOS, please visit http://www.hpe.com/servers/clearos.
NOTE: CentOS not directly supported / Community Supported (Based on RHEL so RHEL testing and enablement applicable
http://h20566.www2.hpe.com/portal/site/hpsc/public/psi/home?sp4ts.oid=1010026818.
Industry Standard Compliance
Microsoft® Logo certifications
NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit:
http://www.hpe.com/servers/ashrae.
UEFI (Unified Extensible Firmware Interface Forum)
NOTE: UEFI is the default for the ML110 Gen10. Legacy mode can be selected in the field or as a CTO option
(758959-B22).
HPE ProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive web-based
graphical user interface that provides a cloud-like experience on-premise, and an Application Marketplace with over 100 apps
ClearOS allows you to build a fully functional server that is just right for you at no upfront cost.
to CentOS) CentOS 6.9 / CentOS 7.3, 7.4.
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server.

HPE ProLiant ML110 Gen10 Server
Integrated Video Standard
• Video modes up to 1920 x 1200 @60Hz (32 bpp)
HPE iLO 5 on system management memory
• 4 Gbit DDR 3 with ECC protection
HPE Server UEFI/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured
HPE Integrated Lights-Out
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and remote
Configure and boot your servers securely with industry standard Unified Extensible Firmware
Interface (UEFI). Learn more at http://www.hpe.com/servers/uefi.
Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning.
Learn more at http://www.hpe.com/servers/intelligentprovisioning.
iLO RESTful API is Redfish API conformance and offers simplified server management
standards. Learn more at http://www.hpe.com/info/restfulapi.
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI
Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more
information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot and Secure Start enable for enhanced security
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• PXE boot support for IPv6 networks
• Workload Profiles for simple performance optimization
UEFI Boot Mode only:
• TPM 2.0 Support
• iSCSI Software Initiator Support.
• HTTP/HTTPs Boot support as a PXE alternative.
• Boot support for option cards that only support a UEFI option ROM
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE
management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.
automation such as configuration and maintenance tasks based on modern industry