HPE P10812-421 Quick Start Guide

EAC Getting Started Guide for HPE ProLiant ML110 Gen10 Server

Abstract

This document contains user information and procedures to assist users with first-time installations.

Part Number: 879288-001 Published: September 2017 Edition: 1

Notices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website.

Product overview.........................................................................................4

Setting up and installing............................................................................. 5

Optional service...................................................................................................................................5

Operational requirements....................................................................................................................5

Space and airflow requirements............................................................................................... 5

Temperature requirements........................................................................................................6

Power requirements..................................................................................................................6

Electrical grounding requirements............................................................................................ 7

Server warnings and cautions............................................................................................................. 7

Rack warnings.....................................................................................................................................8

Enabling increased cooling in RBSU...................................................................................................9

Electrostatic discharge........................................................................................................................ 9

Prerequisites for the initial server setup.............................................................................................. 9

Server box contents...........................................................................................................................10

Setting up the server in tower mode..................................................................................................10

Setting up the server in rack mode.................................................................................................... 11

Configuring the server....................................................................................................................... 11

Installing or deploying an operating system.......................................................................................11

Registering the server....................................................................................................................... 12

Specifications............................................................................................ 13

Environmental specifications.............................................................................................................13

Server specifications......................................................................................................................... 13

Power supply specifications.............................................................................................................. 14

ATX 350W non-hot-plug power supply................................................................................... 14

ATX 550W non-hot-plug power supply................................................................................... 14

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply.................................... 15

information for HPE ProLiant ML110 Gen10 Server..................... 17

EAC local representative information......................................................18

Support and other resources................................................................... 20

Accessing Hewlett Packard Enterprise Support................................................................................ 20

Accessing updates............................................................................................................................ 20

Customer self repair.......................................................................................................................... 21

Remote support.................................................................................................................................21

Warranty information......................................................................................................................... 21

Regulatory information...................................................................................................................... 22

Documentation feedback...................................................................................................................22

Contents 3

Product overview

The HPE ProLiant ML110 Gen10 Server delivers a performance that meets the growing needs of the SMB. The server is a single processor, 4.5U Tower Server that is designed to provide enterprise class features such as redundancy, reliability, and manageability. The server delivers the right size Tower with performance and expandability that covers a wide range of applications and workloads and addresses our customers from SMB to enterprise class server ROBO environments. Accelerate your business with this right-sized compute.

4 Product overview

Setting up and installing

Optional service

Delivered by experienced, certified engineers, Hewlett Packard Enterprise support services help you keep your servers up and running with support packages tailored specifically for HPE ProLiant systems. Hewlett Packard Enterprise support services let you integrate both hardware and software support into a single package. A number of service level options are available to meet your business and IT needs.

Hewlett Packard Enterprise support services offer upgraded service levels to expand the standard product warranty with easy-to-buy, easy-to-use support packages that will help you make the most of your server investments. Some of the Hewlett Packard Enterprise support services for hardware, software or both are:

• Foundation Care – Keep systems running.

◦ 6-Hour Call-to-Repair

◦ 4-Hour 24x7

◦ Next Business Day

• Proactive Care – Help prevent service incidents and get you to technical experts when there is one.

◦ 6-Hour Call-to-Repair

◦ 4-Hour 24x7

◦ Next Business Day

• Deployment service for both hardware and software

• Hewlett Packard Enterprise Education Services – Help train your IT staff.

The time commitment for this repair service might vary depending on the site's geographical region. For more service information available in your site, contact your local center.

For more information on Hewlett Packard Enterprise support services, see the Hewlett Packard Enterprise website.

Hewlett Packard Enterprise support

Operational requirements

Space and airflow requirements

To allow for servicing and adequate airflow, observe the following space and airflow requirements when deciding where to install a rack:

• Leave a minimum clearance of 63.5 cm (25 in) in front of the rack.

• Leave a minimum clearance of 76.2 cm (30 in) behind the rack.

• Leave a minimum clearance of 121.9 cm (48 in) from the back of the rack to the back of another rack or

row of racks.

Setting up and installing 5

Hewlett Packard Enterprise servers draw in cool air through the front door and expel warm air through the rear door. Therefore, the front and rear rack doors must be adequately ventilated to allow ambient room air to enter the cabinet, and the rear door must be adequately ventilated to allow the warm air to escape from the cabinet.

CAUTION:

To prevent improper cooling and damage to the equipment, do not block the ventilation openings.

When vertical space in the rack is not filled by a server or rack component, the gaps between the components cause changes in airflow through the rack and across the servers. Cover all gaps with blanking panels to maintain proper airflow.

CAUTION:

Always use blanking panels to fill empty vertical spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

The 9000 and 10000 Series Racks provide proper server cooling from flow-through perforations in the front and rear doors that provide 64 percent open area for ventilation.

CAUTION:

If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

• Front and rear doors—If the 42U rack includes closing front and rear doors, you must allow 5,350 sq cm (830 sq in) of holes evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).

• Side—The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 in).

Temperature requirements

To ensure continued safe and reliable equipment operation, install or position the system in a well-ventilated, climate-controlled environment.

The maximum recommended ambient operating temperature (TMRA) for most server products is 35°C (95°F). The temperature in the room where the rack is located must not exceed 35°C (95°F).

CAUTION:

To reduce the risk of damage to the equipment when installing third-party options:

• Do not permit optional equipment to impede airflow around the server or to increase the internal rack temperature beyond the maximum allowable limits.

• Do not exceed the manufacturer’s TMRA.

Power requirements

Installation of this equipment must comply with local and regional electrical regulations governing the installation of information technology equipment by licensed electricians. This equipment is designed to operate in installations covered by NFPA 70, 1999 Edition (National Electric Code) and NFPA-75, 1992 (code for Protection of Electronic Computer/Data Processing Equipment). For electrical power ratings on options, refer to the product rating label or the user documentation supplied with that option.

6 Temperature requirements

WARNING:

To reduce the risk of personal injury, fire, or damage to the equipment, do not overload the AC supply branch circuit that provides power to the rack. Consult the electrical authority having jurisdiction over wiring and installation requirements of your facility.

CAUTION:

Protect the server from power fluctuations and temporary interruptions with a regulating uninterruptible power supply. This device protects the hardware from damage caused by power surges and voltage spikes and keeps the system in operation during a power failure.

Electrical grounding requirements

The server must be grounded properly for proper operation and safety. In the United States, you must install the equipment in accordance with NFPA 70, 1999 Edition (National Electric Code), Article 250, as well as any local and regional building codes. In Canada, you must install the equipment in accordance with Canadian Standards Association, CSA C22.1, Canadian Electrical Code. In all other countries, you must install the equipment in accordance with any regional or national electrical wiring codes, such as the International Electrotechnical Commission (IEC) Code 364, parts 1 through 7. Furthermore, you must be sure that all power distribution devices used in the installation, such as branch wiring and receptacles, are listed or certified grounding-type devices.

Because of the high ground-leakage currents associated with multiple servers connected to the same power source, Hewlett Packard Enterprise recommends the use of a PDU that is either permanently wired to the building’s branch circuit or includes a nondetachable cord that is wired to an industrial-style plug. NEMA locking-style plugs or those complying with IEC 60309 are considered suitable for this purpose. Using common power outlet strips for the server is not recommended.

Server warnings and cautions

WARNING:

This server is heavy. To reduce the risk of personal injury or damage to the equipment:

• Observe local occupational health and safety requirements and guidelines for manual material handling.

• Get help to lift and stabilize the product during installation or removal, especially when the product is not fastened to the rails. Hewlett Packard Enterprise recommends that a minimum of two people are required for all rack server installations. A third person may be required to help align the server if the server is installed higher than chest level.

• Use caution when installing the server in or removing the server from the rack; it is unstable when not fastened to the rails.

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

WARNING:

To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power cord to remove power from the server. The front panel Power On/Standby button does not completely shut off system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.

Electrical grounding requirements 7

+ 15 hidden pages