HPE ML30 Gen9 User Manual

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Overview

Page 1

HPE

HPE ProLiant ML30 Gen9, delivers a full featured single
use and

Front View (details for 4LFF and 8SFF)

1.

Four (4) LFF or Eight (8) SAS/SATA HDD cage

2.

Four (4) USB 3.0 connectors

3.

Media Drive Blank

4.

9.5mm Slim SATA DVD-ROM or DVD RW Optical Drive

5.

Power On/Standby button and system power LED button

6.

NIC status LED

8.

UID (unit identification) button/LED

ProLiant ML30 Generation 9 (Gen9)

maintain for growing small businesses and remote branch offices.

-socket tower server with the right features at a competitive price, easy to

7. Health LED

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Overview

Page 2

Rear View

1.

PCI Slots (Slots 1-4)

2.

USB 3.0 (2)

3.

USB 2.0 (2)

4.

Video Connector

5.

UID LED

6. Power Supply Power Fan

7.

HPE 350W Power Supply

8. Network RJ-45 Ports (2)

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Overview

Page 3

1. One (1) processor and heatsink

2.

System Fan

3.

Power Supply

4.

Four (4) DDR4 DIMM slots

5.

System Fans: System fan and Front PCI fan (optional)

Drive Header)

7.

Gen9 Smart Storage Battery Holder Kit

8. MicroSD slot

9.

Four (4) PCIe expansion slots

Internal View

6. Two (2) Internal USB 2.0 connectors (USB Type A, Tape

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 4

NOTE:

Intel® Xeon® processor E3

in

capabilities, and cost
one of the

Processor

One of the following
depending on model

G4400

3.3GHz

2

3MB

54W

2133

G4500

3.5GHz

2

3MB

51W

2133

i3-6100

3.7GHz

2

3MB

51W

2133

i3-6300

3.8GHz 2 4MB 51W 2133

E3-1220v5

3.0GHz

4

8MB

80W

2133

E3-1230v5

3.4GHz 4 8MB 80W 2133

E3-1240v5

3.5 GHz

4

8MB

80W

2133

E3-1270v5

3.6GHz

4

8MB

80W

2133

E3-1240Lv5

2.1GHz

4

8MB

25W

2133

Cache Memory

One of the
following
depending on
model

NOTE: For Quad-core Intel Xeon processors.

Chipset

Intel® C236 Chipset

http://www.intel.com/products/server/chipsets/

On System
Management
Chipset

HPE

NOTE: For more information, visit: http://www.hp.com/go/ilo.

Memory

DDR4 Unbuffered (UDIMM)

DIMM Slots Available

4 4 DIMMs (2 Channels/ 2 DIMMs per channel)

(UDIMM)

64GB

NOTE:

ML30
visit: http://www.hp.com/products/memory.

Memory
Protection

ECC

For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.

-1200v5 quad core processor family is designed to deliver the best combination of performance, built-

-effectiveness. The product also supports Intel® Pentium® and Intel® Core-i3 dual core processors. Choose

following processors based on the model:

Model CPU frequency Cores

L3 Cache Power DDR4 Hz

8MB (1x8MB) Level 3 cache

3MB (1 x 3MB) Level 3 Cache

NOTE: For Dual-core Intel Pentium® CoreTM i3 processors.

NOTE: For more information regarding Intel® chipsets, please see the following

URL:

iLO (Firmware HPE iLO4 2.3) 4GB NAND

Type:

Maximum Capacity

(4 x 16GB UDIMM @2133MHz)

HPE memory from previous generation servers are not fully compatible with the HPE ProLiant

Gen9 Servers. For information regarding HPE Qualified Server Memory

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 5

HPE Ethernet 1Gb 2-port NC332i Adapter

Expansion Slots

Slots #

Width

4
height

3
height

2
height

1

Height

NOTE: Bus Width indicates the number of physical electrical lanes running to the connector.

Storage Controller

One of the following
depending on
model

Base Models

HPE Dynamic Smart Array B140i Controller

NOTE:

Performance Models

HPE Dynamic Smart Array B140i Controller

NOTE:

Internal Storage
Devices

One of the following
depending on
m

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

None ship standard

4 LFF drive bays (non-hot-plug and hot-plug)

HPE LFF HDD Blank Kit.

Maximum Internal
Storage

One of the following
depending on
model

Hot Plug LFF SAS

32TB

4 x 8TB

Hot Plug SFF SAS

16TB

8x 2TB

Hot Plug LFF SATA

32TB

4 x 8TB

Hot Plug SFF SATA

16TB

8 x 2TB

Non-Hot Plug LFF SATA

16TB

4 x 4TB

Hot Plug SFF SATA SSD

960GB

8 x 120GB

Network
Controller

Model Adapter

Expansion

PCIe 3.0 x16 x16

Technology Bus Width Connector

Bus Number Form Factor Notes

Full length/full

odel

PCIe 3.0 x1 x4

PCIe 3.0 x1 x4

PCIe 3.0 x4 x8

Full length/full

Full length/full

Half
Length/Full

Expansion

Slots #

Technology Bus Width Connector

Width

Bus

Number

Device

Number

Form

Factor

Notes

B140i can't mix with any standup internal controller.

B140i can't mix with any standup internal controller.

Optical Drives

Hard Drives

Hard Drive Bays

8 SFF hot-plug drive bays

NOTE: HPE ProLiant ML30 Series servers offer both SFF and LFF models.
NOTE: All Pre-configured Models come populated with some hard drive blanks

installed. Should the customer need additional hard drive blanks, they can order
more using either P/N 666987-B21: HPE SFF HDD Blank Kit or P/N 666986-B21:

CAPACITY CONFIGURATION

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 6

Hot Plug LFF SATA SSD

480GB

4 x 120GB

Power Supply

One of the following
depending on
model

HPE 350W ATX-Gen9 Power Supply FIO Kit

HPE 460W Redundant Power Supply

at: http://www8.hp.com/h20195/v2/GetHTML.aspx?docname=c04111541.

Required Cabling

System Fans

One of
depending on
model

Non-redundant

Redundant

1P model system fan

One (1) Non-redundant system fan

Non-redundant

Redundant

1P model PCIe fan

One (1) Non-redundant PCIe fan

Interfaces

Video

1 (rear)

Network RJ-45 (Ethernet)

2 (1 shared for HPE Integrated Lights-Out)

Micro SD Slot

1 (internal)

NOTE:

SD card into the Micro-SD slot while the server is powered.

USB 3.0

6 (4 front, 2 rear)

USB 2.0

4 (2 rear, 1 internal standard USB, 1 internal USB header)

HPE Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for
enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level

power supply options have been designed specifically for HPE ProLiant Gen9 Essential Series servers.

The HPE 350W FIO Power Supply is the standard, non-redundant AC power supply option for most HPE
ProLiant Gen9 Essential servers. It features Bronze-level (85%) certified power efficiency with a set of

features optimized for the Gen9 Essential-series rack and tower servers.

The HPE 460W (Redundant) AC Power Supply can be configured with redundancy enablement kit to
support power redundancy in ProLiant ML30 Servers, providing additional protection against power
loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce operating

expenses while protecting against trapped power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper
cord is also included with each standard AC power supply option kit. If a different power cord is required,
please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HPE Power Advisor Tool
located at http://www.hp.com/go/hppoweradvisor.

Power Specification and Technical Content for supported power supplies can be found

Server Power Cords

The ProLiant ML30 server is a tower server that ships standard with a 6’ NEMA power cord that allows
connection to wall outlets in a home or office. If customers require additional power cords, they can check
the power cord matrix for the appropriate SKU.

the following

The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro-

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 7

Operating
Systems and
Virtualization
Software Support
for ProLiant
Servers

Microsoft Windows Server

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

VMware

Support Matrix at: http://www.hp.com/go/ossupport and our driver download page.

Upgradeability

Upgradeable to 4 cores

NOTE: Total 2 or 4 cores.

Up to 4 DIMM slots available for higher memory capacity

Up to 8 SFF Hard Drive Bays; or 4 LFF Hard Drive Bays

All PCIe3.0 I/O slots for additional communications and storage expansion

Redundant Power Supply

Optical Drive Bay

NOTE: Up to 2.

Industry Standard
Compliance

ACPI 2.0b Compliant

PCIe 3.0 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

USB 2.0 /3.0 Support

Graphics

Integrated Matrox G200 video standard

• 1920 x 1200 (16 bpp)

HPE iLO 4 On System Management Memory

• 256 MB DDR 3 with ECC (112 MB after ECC and video)

HPE
UEFI/Legacy ROM

NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and

Virtualization Software and latest listing of software drivers available for your server, please visit our

• 1280 x 1024 (32 bpp)

• 16 MB Flash

Server

HPE Server UEFI /Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
and more secured configuration while interacting with your server at boot time. HPE ProLiant Gen9
platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.

NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 8

in the factory.

Form Factor

One of the following
depending on
model

Embedded
Management

iLO)

Embedded Remote

http://www.hp.com/go/insightonline/info

Server utilities

http://www.hp.com/go/smartupdate

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using HPE RESTful API.

• PXE boot support for IPv6 networks

• Boot support for option cards that only support a UEFI option ROM

For more information please visit http://www.hp.com/go/proliant/uefi.
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured

properly to support UEFI.
NOTE: HPE UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode

Micro ATX Tower (4U) chassis with feet/bezel:

14.5" (36.82cm) Height x 6.89" (17.5cm) Width x 18.71" (47.52cm) Length

8 SFF Drive Bay Cage:

4.6" (11.74cm) Height x 5.74" (14.57cm) Width x 4.79" (12.15cm) Length

4 LFF Drive Bay Cage:

4.6" (11.72cm) Height x 5.74" (14.57cm) Width x 6.90" (17.54cm) Length

HPE Integrated
Lights-Out (HPE

UEFI

Monitor your servers for ongoing management, service alerting, reporting and remote
management with HPE iLO. Learn more at http://www.hp.com/go/ilo.

Configure and boot your servers securely with industry standard Unified Extensible
Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.

RESTful API

A single programmatic web interface that allows you to manage and monitor your
HPE ProLiant server using basic HTTP operations (GET, PUT, POST, DELETE and
PATCH). RESTful API for iLO 4 conforms to the Redfish 1.0 DMTF standard (iLO
firmware version v2.30 or higher required for Redfish conformance). Learn more
at http://www.hp.com/go/restfulapi.

Intelligent
Provisioning

Provision servers by discovering and deploying 1 to few servers with Intelligent
Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.

Hewlett Packard Enterprise’s embedded remote support, when used with Insight

Support

Online direct connect or Hewlett Packard Enterprise Insight Remote Support, allows
HPE ProLiant servers to transmit hardware events directly to Hewlett Packard
Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated phone
home support. Learn more at

.

Smart Update

Optimize firmware and driver updates with Smart Update solutions including Smart
Update Manager (SUM) and Service Pack for ProLiant (SPP). Learn more
at

.

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Standard Features

Page 9

http://www.hp.com/go/sim

or http://www.hp.com/go/powershell.

Tool

http://www.hp.com/go/resttool

http://www.hp.com/go/ilo/mobileapp

at http://www.hp.com/go/insightonline/info.

Security

Power-on password

Setup password

Power switch security

Administrator's password

TPM 1.2

UEFI

Warranty

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

HPE Systems
Insight Manager
(HPE SIM)

Scripting Tool Kit
and Windows
PowerShell

HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with SUM to provide quick and seamless firmware updates.
Learn more at

.

Provision 1 to many servers using your own scripts to discover and deploy them with
Scripting Tool Kit for Windows and Linux or Scripting Tools for Windows PowerShell.

Learn more at http://www.hp.com/go/ProLiantSTK

RESTful Interface

HPE iLO Mobile
Application

HPE Insight Online

Scripting tool to provision servers using iLO 4 RESTful API to discover and deploy
servers at scale. Learn more at

Enables the ability to access, deploy, and manage your server anytime from anywhere
from select smartphones and mobile devices. For additional information please
visit:

.

HPE Insight Online, available at no additional cost as part of your Hewlett Packard
Enterprise warranty, Care Pack or contractual support agreement with Hewlett
Packard Enterprise, is a personalized dashboard for simplified tracking of IT
operations and support information from anywhere, anytime. Learn more

This product is covered by a global limited warranty and supported by HPE Services and a worldwide
network of Hewlett Packard Enterprise Authorized Channel Partners resellers. Hardware diagnostic support
and repair is available for three years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty services are available through HPE
Care Pack services or customized service agreements. Hard drives have either a one year or three year
warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business
day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement.
A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HPE replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available
at:

.

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Optional Features

Page 10

http://www.hp.com/go/iLO/essentials

Out is the preferred license built for web hosting, cloud service providers,

visit http://www.hp.com/go/iLO/scale-out.

lay,

http://www.hp.com/go/iloadvanced

HPE Insight
Control

http://www.hp.com/go/insightcontrol

With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array within

Embedded
Management

iLO Essentials

iLO Scale-Out

HPE iLO Essentials is the preferred license for small and medium business that offers
full remote server management capabilities for small and medium business via the
Integrated Remote Console (IRC), virtual media, and e-mail based alerts. Learn more
about HPE iLO Essentials at

.

HPE iLO Scale­and high performance computing data centers, managing massive scale out
environments. This license offers sophisticated scripting tools that provides remote
access through Text Console via SSH, Dynamic power capping, Email-based Alerting
and proactive notifications. For more information,

Server
Management

Storage Software

iLO Advanced

HPE iLO Advanced licenses offer smart remote functionality without compromise, for
all HPE ProLiant servers. The license includes the full integrated remote console, virtual
keyboard, video, and mouse (KVM), multi-user collaboration, console record and rep
and GUI-based and scripted virtual media and virtual folders. You can also activate the
enhanced security and power management functionality. Learn more about HPE iLO
Advanced at

.

HPE Insight Control, lets you deploy, migrate, monitor, remote control, and optimize your
IT infrastructure through a single, simple management console. For more information,
see

.

Whether you need to solve a specific data protection, archiving, or storage command and control challenge,
or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HPE storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets
and respond faster to business opportunities.
Storage software that gets the job done:

• Data Protection and Recovery Software

Whether you're a large enterprise or a smaller business, HPE data protection and recovery
software will cost-effectively protect you against disaster and ensure business continuity.

• Data Archive and Migration Software

HPE's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed
or less valuable data to lower cost storage.

• Storage Resource Management Software (SRM)

HPE's storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your physical and
virtual environments.

• Data Replication Software

Hewlett Packard Enterprise offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.

• Storage Device Management Software

Maximize your investment in HPE storage and networking with software that enables hardware­specific configuration, performance tuning and connectivity management.

• HPE StoreVirtual VSA

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Optional Features

Page 11

see: http://www.hp.com/go/storage/software

SCE is a guided self
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you requ
not available in SCE, please contact
assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index.

your host server. Manage it as a single pool of shared storage capacity, and scale it to match your
evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for HPE StoreVirtual
VSA software with 1TB of capacity at no extra cost. Simply select to install HPE StoreVirtual VSA
software during server setup within Intelligent Provisioning. More information, instructional videos,
and free console management software are available at http://www.hp.com/go/vsa1TB

NOTE: For more information about Storage Software including QuickSpecs, please

.

.

One Config Simple
(SCE)

-service tool to help sales and non-technical people provide customers with initial

ire "custom" rack configuration or configuration for products

HPE's Customer Business Center or an Authorized Partner for

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Service and Support

Page 12

Service and Support

HPE Technology Services for Industry Standard Servers

HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Connect to
support technolo
stay informed and in control, anywhere, any time.

Protect your business beyond warranty with HPE Care Pack Services

HPE Care Pack Services enable you to order the rig
as you purchase your new server, giving you full entitlement for the term you select.

Optimized Care

Supports maintaining servers at optimum performance availability

HPE Proactive Care with 24x7

HPE Proactive Care helps prevent problems and stabilize IT by utilizing secure, real
analytics and proactive consultations when your products are connected to

Pack Service combines three years’ proactive reporting and advice with our 24x7 coverage and enhanced
escalation management, four hour hardware response time and two hour call back for software questions
on leading industry standard software runn
server. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Standard Care
Package

Supports maintaining high level of server availability

Foundation Care 24x7, three

HPE Foundation Care 24x7 connects you to
week for assistance on resolving issues. Hardware onsite response within four hours
collaborat
leading software running on your HPE server.
Packard Enterprise

http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Related Services

HPE ProLiant Server Hardware Installation

Provides
options to assist you in bringing your new hardware into operation in a timely and professional manner.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981

Factory Express for Servers and storage

HPE Factory Express offers configuration, customization, integration and deployment services for HPE
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed. For more information on
server model please contact your sales representative or go to:

express

Data Privacy Services

Protect your data through better
protect sensitive data to reduce the risk of unauthorized access to private information and help meet
compliance requirements.
our removal services provide convenient data sanitization and our recovery services allow you to safely

Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our

gy lets you to tap into the knowledge of millions of devices and thousands of experts to

ht service level, length of coverage and response time

coverage, three year Care Pack Service

ing on your HPE ProLiant

-time, predictive

Hewlett Packard. This Care

-year Care Pack Service

Hewlett Packard Enterprise 24 hours a day, seven days a

ive software included in this Care Pack service provides troubleshooting assistance on industry

Simplify your support experience and make Hewlett

your first call for hardware or software questions.

for the basic hardware installation of HPE branded servers, storage devices and networking

-9356EN.pdf

.

media management. HPE Data privacy services help manage and

Our retention services allow you to keep drives and other devices upon failure,

Factory Express services for your specific

http://www.hp.com/go/factory-

if needed;

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Service and Support

Page 13

retire IT assets and capture any remaining value from the
hardware.
Additional HPE Care Pack services can be found at: http://www.hp.com/go/cpc

Connect your
devices to HPE

Unlock all of the benefits of your technology investment by connecting your products
Enterprise

consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre
automatic call logging, and aut
Care Service customers will also benefit from proactive activities to help prevent issues and increase
optimization. All of these benefits are already available to you with your server st
products, securely connected to Hewlett Packard Enterprise support.

HPE Support Center

Personalized online support portal with access to information, tools and experts to support
Packard
experts, access support resources or collaborate with peers. Learn more

HPE's Support Center Mobile A
for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a
Packard Enterprise
agreement.

** HPE Support Center Mobile App is subject to local availability

Parts and Materials

Hewlett Packard Enterprise
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.

Parts and components that have reached their maximum suppor
limitations as set forth in the

product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.

For more
information

To learn more on HPE ProLiant servers, please contact your
representative or
visit: http://www.hp.com/services/proliant

http://www.hp.com/services/dataprivacy

to Hewlett Packard

. Achieve up to 77% reduction in down time, near 100% diagnostic accuracy and a single

-failure alerts,

omatic parts dispatch. HPE Proactive Care Service and HPE Datacenter

orage and networking

Hewlett

Enteprise business products. Submit support cases online, chat with Hewlett Packard Enterprise

http://www.hp.com/go/hpsc

pp** allows you to resolve issues yourself or quickly connect to an agent

Hewlett

warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support

will provide HPE-supported replacement parts and materials necessary to

ted lifetime and/or the maximum usage

manufacturer's operating manual, product quick-specs, or the technical

Hewlett Packard Enterprise sales

Hewlett Packard Enterprise Authorized Channel Partner or

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Pre-configured Models

Page 14

Base Models

Performance Models

[SKU Number]

Model Name

U

B140i 4LFF SATA 350W PS Base Server

U B140i 4LFF SATA 460W RPS Perf Server

Processor

Intel® Xeon® E3-1220v5

Intel® Xeon® E3-1240v5

Number of Processors

Memory

Network Controller

Broadcom 5720 Dual-port 1GbE

Storage Controller

Hard Drive

Internal Storage

Optical Drive Bay

Optical Drive

PCI-Express Slots

Power Supply

(1) 350W ATX Power Supply

(1) 460W Redundant Power Supply

Fans

Management

Provisioning (standard), iLO Advanced (optional), Insight

Control (optional)

Form Factor

Warranty

day response.

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.

1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.

2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options
purchased will be shipped separately.

3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.

NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need
additional hard drive blanks, they can order more using either P/N 666987-B21: HPE SFF Hard Drive Blank Kit or P/N
666986-B21: HPE LFF Hard Drive Blank Kit.
NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is
also included with each standard AC power supply option kit. If a different power cord is required, please check
the ProLiant Power Cables

web page.

824379-B21 830893-B21

HPE ProLiant ML30 Gen9 E3-1220v5 1P 4GB-

HPE ProLiant ML30 Gen9 E3-1240v5 1P 8GB-

iLO Management (standard), Intelligent

4GB (1x4GB UDIMMs, 2133 MHz) 8GB (1x8GB UDIMMs, 2133 MHz)

HPE Dynamic Smart Array B140i

None ship standard; includes 2 LFF hard drive blanks

4 LFF HDD Bays (Hot Plug)

1; (Optional: DVD-ROM, DVD-RW)

1 non hot plug, non-redundant

Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business

One

None

4 PCIe 3.0 slots

Tower (4U)

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Smart Buy Models

Page 15

Smart Buy Models

[SKU Number]

Model Name

Processor

Number of Processors

One

Memory

Network Controller

Storage Controller

HPE Dynamic Smart Array B140i

Hard Drive

None

Internal Storage

Optical Drive Bay

Optical Drive

9.5mm SATA JB DVD-RW

PCI-Express Slots

Power Supply

Fans

1 non hot plug, non-redundant

Management

Control (optional)

Keyboard/Mouse

Form Factor

Warranty

response.

HPE ProLiant ML30 Gen9 E3-1230v5 4G US Svr/S-Buy

4GB (1x4GB UDIMMs, 2133 MHz)

Broadcom 5720 Dual-port 1GbE

831065-S01

Intel® Xeon® E3-1230v5

iLO Management (standard), Intelligent Provisioning (standard), iLO Advanced (optional), Insight

4 LFF HDD Bays (Hot Plug)

1; (Optional: DVD-ROM, DVD-RW)

4 PCIe 3.0 slots

(1) 350W ATX Power Supply

USB RoHS US Keyboard and USB RoHS Opt Mouse included

Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day

Tower (4U)

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Configuration Information - Factory Integrated Models

Page 16

Step 1: Base Configuration (choose one of the following configurable models)

[

hot

SKU Number

Processor

DIMM Slots

Storage Controller

HPE Dynamic Smart Array B140i

PCIe

Drive Cage

Network
Controller

Fans

Management

USB

Step
noted)

Entry Processors

HPE ML30 Gen9 Intel® Pentium® G4400 (3.3GHz/2-core/3MB/54W) FIO Processor Kit

820295-L21

HPE ML30 Gen9 Intel® Pentium® G4500 (3.5GHz/2-core/3MB/51W) FIO Processor Kit

823389-L21

HPE ML30 Gen9 Intel® Core

i3-6300 (3.8GHz/2-core/4MB/51W) FIO Processor Kit

823379-L21

HPE ML30 Gen9 Intel® Core

i3-6100 (3.7GHz/2-core/3MB/51W) FIO Processor Kit

837095-L21

HPE ML30 Gen9 Intel® Xeon® E3-1220v5 (3.0GHz/4-core/8MB/80W) FIO Processor Kit

820293-L21

HPE ML30 Gen9 Intel® Xeon® E3-1230v5 (3.4GHz/4-core/8MB/80W) FIO Processor Kit

823371-L21

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your
local sales representative for information on configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

2. FIO indicates that this option is only available as a factory installable option.

3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.

4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.

CTO Server]

HPE ProLiant ML30 Gen9 Non-

Plug 4LFF Configure-to-order

Server

HPE ProLiant ML30 Gen9 Hot

Plug 4LFF Configure-to-order

Server

HPE ProLiant ML30 Gen9 Hot

Plug 8SFF Configure-to-order

Server

HPE Processors

823401-B21 823402-B21 823403-B21

1

4 DIMM slots for UDIMM DDR4 Memory

4 PCIe 3.0 slots

4LFF Non-Hot Plug 4LFF Hot Plug 8SFF Hot Plug

Broadcom 5720 Dual-port 1GbE

iLO Management (standard), Intelligent Provisioning (standard), iLO Essentials (optional)

1 non-hot plug, non-redundant

4 front, 4 rear, 2 internal

2: Choose Required Options (only one of the following from each list unless otherwise

TM

TM

Base Processors

Performance Processors

HPE ML30 Gen9 Intel® Xeon® E3-1240Lv5 (2.1GHz/4-core/8MB/25W) FIO Processor Kit 820299-L21

HPE ML30 Gen9 Intel® Xeon® E3-1240v5 (3.5GHz/4-core/8MB/80W) FIO Processor Kit 823373-L21

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Configuration Information - Factory Integrated Models

Page 17

1 is the number of CPU, 2 is

socket type/segment designation, 00 = Processor SKU, x = L for low power SKUs and

15 Unbuffered Standard Memory

Kit

Kit

15 Unbuffered Standard Memory

Kit

experience operational issues with your server

HPE Entry-Level Power Supplies

HPE ML30 Gen9 4U Redundant FIO Power Supply Enablement Kit

822607-B21

HPE Memory

HPE ML30 Gen9 Intel® Xeon® E3-1270v5 (3.6GHz/4-core/8MB/80W) FIO Processor Kit 823375-L21

NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.

NOTE: For the Intel® C236 Chipset E3-1200 Series, the letter preceding the model
number indicates the Product Line (E3, E5, E7); 1200x v#,

v# (not yet designated) is the version number

NOTE: Select one or more memory below

NOTE: HPE memory from previous generation servers are not qualified or warranted

with this HPE ProLiant Server.

NOTE: HPE Standard Memory (UDIMM) is required to realize the memory
performance improvements and enhanced functionality listed in this document for
this HPE ProLiant Server.

NOTE: With one processor installed, four DIMMs slots are available.

NOTE: For more information on ProLiant Energy Efficient features,
see: http://www.hp.com/go/proliant-energy-efficient.

NOTE: Depending on the memory configuration and processor model, the memory

speed would run at 2133MHz. Please see Memory Population Table or the Online
Memory Configuration tool at: http://www.hp.com/go/ddr4config

Unbuffered DIMMs (UDIMMs)

HPE 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-

805667-B21

HPE Power
Supplies

HPE 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard Memory

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2133 CAS-15-15-

HPE 8GB (1x8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard Memory

805669-B21

805671-B21

819880-B21

Kit

NOTE: Prior to selecting a power supply option, it is highly recommended that you
review your server configuration in the HPE Power Advisor tool to determine the
right size power supply for your server configuration. The HPE Power Advisor is
located at: http://www.hp.com/go/hppoweradvisor.

NOTE: Mixing of power supplies in the same server is not supported. All power
supplies must be of the same input voltage, output rating, and efficiency rating. If
non-matching power supplies are installed, you may receive an error message and/or

HPE 460W CS Gold Ht Plg Power Supply Kit

503296-B21

NOTE: Must select 4U RPS Enablement Kit (P/N: 822607-B21).

Customer can select: 460W Hot Plug Power Supply x1 + 4U RPS Enablement Kit x1 or

Customer can select: 460W Hot Plug Power Supply x2 + 4U RPS Enablement Kit x1

HPE ML30 Gen9 350W E-Star 2.0 FIO Power Supply Kit 822384-B21

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Configuration Information - Factory Integrated Models

Page 18

list unless otherwise noted)

HPE ML30 Gen9 Front PCI FIO Redundant Fan Kit

HPE Insight Control

Electronic

HP Legacy FIO Mode Setting

NOTE:

CANNOT be selected together.

Step 3: Choose Additional Factory Integratable Options (only one of the following from each

HPE Optical Drives

HPE Cooling
Options

HPE Insight
Software

BIOS Mode

HPE ML30 Gen9 Slim Optical Disk Drive FIO Enablement Kit 820288-B21

820290-B21

NOTE: Required for any PCI-E card.

HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server

C6N36A

FIO License

HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO

C6N36ABE

License

758959-B22

The Legacy Mode Setting and HP Dual 8GB microSD EM USB Kit (741279-B21)

Controller State

HP Mfg FIO Enable HBA Mode Setting

792962-B21

NOTE: If H240 is the primary controller with this option, then RAID is not allowed

HP AHCI-Enable FIO Setting

801845-B21

NOTE: If B140i is the primary controller with this option, then RAID is not allowed

Step 4: Choose Additional Options for Factory Integration from Core and Additional Options
sections below

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Core Options

Page 19

HPE ML30 Gen9 4 Large Form Factor Hot Plug Hard Drive Cage Kit

822608-B21

HPE ML30 Gen9 8 Small Form Factor Hot Plug Hard Drive Cage Kit

822756-B21

Memory Kit

Memory Kit

Memory Kit

HPE 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive

726536-B21

HPE 9.5mm SATA DVD-RW JackBlack G9 Optical Drive

726537-B21

Hard Drive

B21

Drive

B21

Drive

B21

Drive

B21

Drive

B21

Drive

B21

Drive

B21

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales
representative for additional information.

HPE Unique
Options

HPE ML30 Gen9 Front PCI FIO Redundant Fan Kit

NOTE: Required for any PCI-E card.

820290-B21

HPE Memory

Unbuffered DIMMs (UDIMMs)

HPE 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard

805667-B21

Memory Kit

HPE 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard

HPE 8GB (1x8GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Unbuffered Standard

805669-B21

805671-B21

819880-B21

HPE Optical Drives

HPE Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the

server backplane) should operate at the same data transfer rate or the system bandwidth will be
negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

HPE 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty

718162-

HPE 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

652589-

759212-

652583-

759210-

652572-

759208-

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Core Options

Page 20

Drive

B21

HPE 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652605-B21

Drive

B21

HPE 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

781518-B21

Drive

B21

Hard Drive

B21

If B140i is the primary controller, user can only select SATA drives.

B21

HPE 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652749-B21

HPE 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652745-B21

HPE 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive

765464-B21

B21

Warranty Hard Drive

B21

Warranty Hard Drive

B21

Warranty Hard Drive

B21

Drive

B21

If B140i is the primary controller, user can only select SATA drives.

B21

HPE 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

695510-B21

HPE 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652766-B21

HPE 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652757-B21

HPE 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard

HPE 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard

HPE 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty

HPE 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive

NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in

Controllers section.

SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

652564-

781516-

791034-

628065-

659339-

HPE 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive

NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in

Controllers section.
If B140i is the primary controller, user can only select SATA drives.

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HPE 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr

HPE 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr

HPE 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr

HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard

HPE 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive

NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in

Controllers section.

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

765466-

737394-

737261-

765424-

793699-

793703-

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Core Options

Page 21

HPE 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652753-B21

Drive

B21

Drive

B21

B21

HPE 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655710-B21

HPE 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655708-B21

B21

If B140i is the primary controller, user can only select SATA drives.

B21

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

753874-B21

HPE 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

693687-B21

HPE 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

628061-B21

HPE 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

658079-B21

HPE 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

657750-B21

HPE 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

658071-B21

Drive

B21

Drive

B21

Hard Drive

B21

Drive

B21

B21

Mainstream 3yr Wty Solid State Drive

B21

HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard

HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard

HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty

765257-

765259-

793671-

Hard Drive

NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in

Controllers section.
If B140i is the primary controller, user can only select SATA drives.

SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HPE 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive 765453-

HPE 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive

765455-

NOTE: User may select any combination of SAS or SATA Hard Drives.
SAS drives require the selection of a SAS controller. See card lists in

Controllers section.

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HPE 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard

HPE 8TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive

NOTE: User may select any combination of SAS or SATA Hard Drives.
If B140i is the primary controller, user can only select SATA drives. SAS drives

require the selection of a SAS controller. See card lists in Controllers section.

6G SATA Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

HPE 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise

765253-

765255-

793667-

793683-

793695-

691862-

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Core Options

Page 22

in SC Enterprise Value 3yr Wty M1

Solid State Drive

B21

Mainstream 3yr Wty Solid State Drive

B21

Solid State Drive

B21

HPE Large Form Factor Hard Drive Blank Kit

666986-B21

HPE Small Form Factor Hard Drive Blank Kit

666987-B21

HP ML10v2 Drive Enablement Kit

812248-B21

NOTE:

up to 1x.

HPE

1 Gigabit Ethernet adapters

HPE Ethernet 1Gb 4-port 331T Adapter

647594-B21

HPE Ethernet 1Gb 2-port 361T Adapter

652497-B21

HPE Ethernet 1Gb 2-port 332T Adapter

615732-B21

10 Gigabit Ethernet adapters

HPE Ethernet 10Gb 2-port 560SFP+ Adapter

665249-B21

HPE Ethernet 10Gb 2-port 530T Adapter

656596-B21

HPE Ethernet 10Gb 2-port 530SFP Adapter

652503-B21

HPE
Supplies

HPE Entry

HPE ML30 Gen9 350W E-star 1.0 FIO Power Supply Kit

820303-B21

NOTE: Max=1.

B21

HPE
and Graphics
Accelerators

HPE NVIDIA Quadro K2200 Graphics Accelerator

J0G89A

6G SATA Hot Plug SFF Value Endurance (2.5-inch) Enterprise Value M1 Solid
State Drives

HPE 120GB 6G SATA Value Endurance SFF 2.5-

6G SATA Hot Plug LFF (3.5-inch) Enterprise Mainstream Solid State Drives

HPE 100GB 6G SATA Mainstream Endurance LFF 3.5-in SC Enterprise

6G SATA Hot Plug LFF (3.5-inch) Enterprise Boot Solid State Drives

HPE 120GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Boot 3yr Wty

Hard Drive Kits

Compatible with all chassis and supports NHP LFF Hard Disk. If ATX

PSU is installed, system support up to 2x. If RPS is installed, system support

764923-

691852-

718171-

Networking

Power

HPE Ethernet 10Gb 2-port 561T Adapter

NOTE: Max=1 if selected with another x8 device.

-Level Power Supplies

HPE ML30 Gen9 350W E-star 2.0 FIO Power Supply Kit

HPE 460W CS Gold Ht Plg Power Supply Kit

NOTE: Must select 4U RPS Enablement Kit.
Customer can select:460W Hot Plug Power Supply x1 + 4U RPS Enablement

Kit x1
460W Hot Plug Power Supply x2 + 4U RPS Enablement Kit x1
Max=2

716591-B21

822384-

503296-B21

Computation

NOTE: An x16 device cannot be selected together with GPU.

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Additional Options

Page 23

License

HPE Insight Control Server Provisioning Media Kit

BD883A

Server License

r to obtain the license activation key(s). Includes one year of 24 x 7

http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html

HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU

E6U64ABE

Server License

HPE iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates

BD505A

HPE iLO Advanced Flexible Qty License with 3yr 24x7 Tech Support and Updates

BD506A

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU

E6U59ABE

Updates Single Svr License

Updates Single Svr License

Updates E-LTU

NOTE: For more information, visit: http://www.hp.com/go/ilo.

HPE Smart Array P440/2GB FBWC 12Gb 1-port Int SAS Controller

820834-B21

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of a Hewlett Packard Enterprise approved configurator. Contact your local sales representative
for additional information.

HPE Insight
Software

HPE Insight Control

HPE Insight Control including 1yr 24x7 Technical Support and Updates Electronic

C6N28ABE

Embedded
Management

HPE Insight Control including 1yr 24x7 Technical Support and Updates Single

C6N27A

HPE Insight Management Media Kit C6N31A

NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate. The license entitlement certificate must
be redeemed online or via fax in orde
HPE Software Technical Support and Update Service.
NOTE: Licenses ship without media. The HPE Insight Control Media Kit can be ordered separately, or
can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the QuickSpecs
at:

.

HPE iLO Advanced

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Single

512485-B21

HPE iLO Advanced Tracking License with 3yr 24x7 Tech Support and Updates BD507A

HPE iLO Essentials

HPE Integrated Lights-Out Essentials including 3yr 24x7 Tech Support and

HPE Integrated Lights-Out Essentials including 1yr 24x7 Tech Support and

HPE Integrated Lights-Out Essentials including 3yr 24x7 Technical Support and

HPE Integrated Lights-Out Essentials including 1yr 24x7 Technical Support and
Updates E-LTU

NOTE: For additional license kits, including electronic delivery options, please
see the QuickSpecs at:

http://h18004.www1.hp.com/products/quickspecs/14276_na/14276_na.html.

HPE Storage

SAS Controllers

Controllers

BD774A

BD775A

E6U61ABE

E6U62ABE

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Additional Options

Page 24

SAS Controller Options

B21

HPE Smart Host Bus Adapters

B21

B21

B21

Battery Holder

B21

HPE StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive

EH964A

NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices
Must select P440/P840 Cable Kit x1
Max=1
Must select Megacell battery x1 + battery holder kit x1 if no other P-series
controllers are selected.

HPE Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller

NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices Must select P440/P840 Cable Kit x1
Must select Megacell battery x1 + battery holder kit x1 if no other P-series
controllers are selected.
Max=1

HPE Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller

NOTE: Must select Megacell battery x1 + battery holder kit x1 if no other P­series controllers are selected.
Max=1

HPE ML110 Gen9 Mini SAS P440/P840 Cable Kit

NOTE: 1pcs required per P440/4G or P440/2G controller.

HPE 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers

NOTE: Max=1.

HPE H240 12Gb 2-ports Int Smart Host Bus Adapter

NOTE: Device Count - This controller can support up to 8 internal SAS/SATA
devices
1pc required per H240 controller for HPE 4LFF CTO Server
2pcs required per H240 controller for 8SFF CTO Server
Max=1

HPE H241 12Gb 2-ports Ext Smart Host Bus Adapter

NOTE: Max=1.

HPE ML110 Gen9 Mini SAS H240 Cable Kit

NOTE: 1pc required per H240 controller for HPE 4LFF CTO Server
2pcs required per H240 controller for 8SFF CTO Server

HPE ML150 Gen9 Smart Storage Battery Holder Kit

NOTE: Max=1.

726821-B21

726825-B21

789651-B21

727258-

726907-

726911-

789648-

786710-

HPE Tape Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media

see: http://www.hp.com/go/tape. For hardware and software compatibility of HPE tape backup
products see: http://www.hp.com/storage/SPOCK and http://www.hp.com/go/ebs.

NOTE: Must select SAS controller to support internal SAS tape drives.

NOTE: Tape drive and HDD total amount can't exceed SAS controller support qty.
NOTE: Limited to H240 when select Tape Drive.

Tape Drives

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Additional Options

Page 25

HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive

EH970A

HPE Mini SAS High Density to 4-lane Mini SAS External Fanout 2 Meter Cable

K2R09A

HPE Mini SAS High Density to 4-lane Mini SAS External Fanout 4 Meter Cable

K2R10A

HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive

BB874A

http://h18000.www1.hp.com/products/quickspecs/14419_na/14419_na.html

HPE D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle

E7W30A

HPE D6000 w/70 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 280TB Bundle

E7W31A

HPE D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle

QQ697A

HPE D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle

QQ698A

HPE D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle

QQ699A

HPE D6000 w/70 3TB 6G SAS 7.2K LFF Dual port MDL HDD 210TB Bundle

QQ700A

HPE D2600 w/12 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 48TB Bundle

E7W32A

Bundle

Bundle

Bundle

HPE 8GB microSD Enterprise Mainstream Flash Media Kit

726116-B21

HPE 32GB microSD Enterprise Mainstream Flash Media Kit

700139-B21

HPE 8GB USB Enterprise Mainstream Flash Media Drive Key Kit

737953-B21

HPE Installation ML/DL Series 10 Service

U7WZ5E

HPE Startup ML/DL Series 10 Service

U7WZ7E

HPE 3 year Foundation Care Next business day ML30 Gen9 Service

H1AS0E

HPE 3 year Foundation Care Next business day with DMR ML30 Gen9 Service

H1AS1E

HPE 3 year Foundation Care 24x7 ML30 Gen9 Service

H1AS6E

HPE 3 year Foundation Care 24x7 with DMR ML30 Gen9 Service

H1AS7E

HPE 3 year Foundation Care Next business day with CDMR ML30 Gen9 Service

H1AX4E

HPE 3 year Foundation Care 24x7 with CDMR ML30 Gen9 Service

H1AX7E

Proactive Care

HPE 3 year Proactive Care 24x7 ML30 Gen9 Service

H1AS8E

HPE 3 year Proactive Care 24x7 with DMR ML30 Gen9 Service

H1AS9E

HPE 3 year Proactive Care 24x7 with CDMR ML30 Gen9 Service

H1AX8E

HPE Disk Storage
System

s

HPE USB and SD
Options

Disk Enclosures

HPE D6000 Dual I/O Module Disk Enclosure

NOTE: See the D6000 Disk Enclosure QuickSpecs for additional information
including configuration steps and additional options needed for a complete
solution at:

HPE D6000 w/70 6TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 420TB

HPE D6000 w/35 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 280TB

HPE D6000 w/70 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 560TB

HPE Enterprise Mainstream Flash Media Kits for Memory Cards

QQ695A

M0T57A

M0T58A

M0T59A

HPE Care Pack
Service

s

Installation & Start-up Services

Foundation Care

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Memory

Page 26

NOTE:

HPE Standard Memory

HPE Standard Memory is unique technology which is designed to work on 10/100 series Rack and Tower server. In Gen9 Server
HPE Standard Memory has passed HPE's ri
options and will provide a platform to allow future memory
System Insight Management and Insight Control manageme

DDR4 memory population guidelines

For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration
Tool:

General Memory Population Rules and Guidelines

.

The HPE ProLiant ML30 Gen9 Server has four memory slots

.

There are two channels per server with two DIMM slots per channel

.

Memory channel 1 consists of the two (2) DIMMs that are closest to the processor

.

Memory channel 2 consists of the two (2) DIMMs that are furthest from the processor

. Support for single/dual-rank 2133 MT/s ECC UDIMM (unbuffered DIMMS)

. No support for LRDIMMs; RDIMMs; Non-ECC UDIMMs

. Do not install DIMMs if the processor is not installed

.

Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)

.

Non-ECC DIMMs are not supported

Memory configurations listed do not apply to "Factory Integrated Models".

gorous qualification and test processes. HPE Standard Memory is a certified HPE

-related support enhancements through HPE Active Health System,
nt software.

http://www.hp.com/go/ddr4memory-configurator.

Memory
Population
guidelines

. The server supports up to 64 GB (4 x 16-GB) for Unbuffered DIMMs

:

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Memory

Page 27

.

Always use HPE qualified DIMMs

Intel Gen9 Supported Memory Bandwidth for HPE ProLiant Gen9 Intel® Xeon® E3-1200v5 Series Processor Family

Memory Bandwidth and Capacity

[DIMM Type]

DIMM Rank

DIMM Capacity

DIMM Native
Speed (MT/s)

Voltage

1.2V

1.2V

1.2V

1.2V

SLOTS THAT CAN BE POPULATED

4 slot servers

MAXIMUM CAPACITY (GB)

POPULATED DIMM SPEED (MT/s)

1 DIMM Per
Channel

2 DIMM Per
Channel

3 DIMM Per
Channel

• Population order; start with "A" first, "B" second, "C" third, etc.

• Population order; start with "A" first, "B" second, "C" third, etc.

A,CPU1-B,CPU2-B,CPU1-C, CP2-C

CPU 1

CPU 2

Slot #

population order

Slot #

population order

Chnl 1

1 C 1 2 A 2

CPU 1

Unbuffered with ECC DIMMs (UDIMMs)

Single

Rank

4GB 8GB 8GB 16GB

Single

Rank

Dual Rank Dual Rank

2133 2133 2133 2133

Std

Voltage

Std

Voltage

Std

Voltage

4 4 4 4

Std

Voltage

16 32 32 64

2133

2133

2133

2133

2133

2133

2133

2133

DIMM slot and

Standard memory replaced with optional memory (1 CPU model)
configuration
diagram

• When two processors are installed, install DIMMs in sequential alphabetic order: CPU1-A, CPU2-

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Memory

Page 28

Slot #

population order

CPU 2

Slot #

population order

Chnl 2

3 D 3

4 B 4

Memory Speed by

Processor Models

Supported Memory Speeds

G4400, G4500, i3
1230v5, E3-1240Lv5, E3-1240v5, E3-1270v5

2133MHz

Pre

Standard Memory

Maximum Memory Plus
Optional Memory

Standard Memory
Replaced with Optional
Memory

E3-1220v5

4GB (1x4GB)

52GB (3x16GB, 1x4GB)

64GB (4x16GB)

E3-1240v5

8GB (1x8GB)

56GB (3x16GB, 1x8GB)

64GB (4x16GB)

Processor Model

Standard and

-Configured Models

-6300, i3-6100, E3-1220v5, E3-

Maximum Memory
Capacity (Pre­configured
Models)

DDR4 memory options part number decoder

NOTE: Capacity references are rounded to the common gigabyte (GB) values.

• 2GB = 2,048MB

• 4GB = 4,096MB

• 8GB = 8,192MB

• 16GB = 16,384MB

• 32GB = 32,768MB

• 64GB = 65,536MB

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Storage

Page 29

1-4 4 x LFF SATA/SSD Non-hot-plug Hard Drive Bays

1-4 4 x LFF SAS/SSD Hot Pluggable Hard Drive Bays

4-Bay LFF non-hot-plug drive model

4-bay LFF hot-plug drive model

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Storage

Page 30

Bays

8-bay SFF hot-plug drive model

1 x 8 8 x SFF SATA/SSD Hot Pluggable Hard Drive

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Storage

Page 31

Maximum Storage Capacity -

Total (4 LFF Drive)

32TB

Total (8 SFF Drive)

16TB

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Technical Specifications

Page 32

14.90(H) x 7.40(W) x 19.35(D) in (37.85 x 18.80 x 49.15 cm)

Minimum:

27.1lb(13.56kg)

Maximum:

30.8lb(15.4kg)

Voltage

100 to 120 VAC

Current

2.5 to 6 Amps

Frequency

47 to 63 Hz

412W to 526W at 115 V AC input

412W to 523W at 230 V AC input

BTU Rating

460W - 1773 BTU / hr (at 120 VAC), 1715 (at 240 VAC)

350 W (at 115 VAC)

350 W (at 230 VAC)

350 W (at 115 VAC)

350 W (at 230 VAC)

0° to 40°C (32° to 104°F) at sea level with an altitude derating of 1.0°C

URL: http://www.hp.com/servers/ashrae.

Operating Support

(36°F/hr).

temperature, non-condensing.

is 457 m/min (1500 ft/min).

System Unit

Tower
Dimensions

Tower Weight

Input

Range Line

Requirements

Rated Input

Rated Input

Rated Input
Power

Maximum

Power Supply
Output

Rated Steady­State Power

Maximum Peak
Power

System Inlet
Temperature

Standard
Operating Support

per every 305 m (1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper

limit and rate of change may be limited by the type and number of
options installed. For approved hardware configurations, the

supported system inlet range is extended to be: 5° to 40°C (41° to
104°F) at sea level with an altitude derating of 1.0°C per every 175 m
(1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050
m (10,000 ft). The approved hardware configurations for this system
are listed at the URL: http://www.hp.com/servers/ashrae. For
approved hardware configurations, the supported system inlet range
is extended to be: 5° to 45°C (41° to 113°F) at sea level with an altitude
derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900
m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved
hardware configurations for this system are listed at the

Extended Ambient

Non-operating

Relative
Humidity

Altitude

Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb

Non-operating 0 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb

Operating 3050 m (10,000 ft). This value may be limited by the type and

-30° to 65°C (-22° to 145°F). Maximum rate of change is 20°C/hr

temperature.

number of options installed. Maximum allowable altitude change rate

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Technical Specifications

Page 33

m/min (1500 ft/min).

with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

4.2 Bels (1P LFF Base)

3.7 Bels (1P LFF Performance)

27 dBA (1P LFF Base)

23 dBA (1P LFF Performance)

Operating

4.2 Bels (1P LFF Base)

3.8 Bels (1P LFF Performance)

23 dBA (1P LFF Base)

23 dBA (1P LFF Performance)

ons. Additional

options may result in increased sound levels.

FCC Rating

Class B

60950-1; IEC 60950-1

eligible to bear the appropriate compliance logos and statements.

Number of PCI
links

PCI link rate

4 Gb/s

Storage protocol
support

rate

Number of
SAS/SATA links

SAS/SATA
connectivity

Expander
support

Non-operating 9144 m (30,000 ft). Maximum allowable altitude change rate is 457

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and declared average
bystander position A-Weighted sound pressure levels (LpAm) when the product is
operating in a 23°C ambient environment. Noise emissions were measured in accordance

L WAd

L pAm

L WAd

L pAm

NOTE: Configurations tested for 1P LFF Base models include one (1) 1TB LFF SATA
Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: Configurations tested for 1P LFF Performance models include one (1) 1TB LFF
SATA Midline HDD and Windows 2012 Enterprise 64-bit.

NOTE: The Listed sound levels apply to standard shipping configurati

HPE Dynamic
Smart Array
B140i Controller

Emissions
Classification

SAS/SATA peak
data transfer

Normative
Standards

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003;
CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN

NOTE: Product conformance to cited product specifications is based on sample
(type) testing, evaluation, or assessment. This product or family of products is

Four

SATA

6 Gb/s

10 links

2x4 connectors; 2x1 connectors

No

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Technical Specifications

Page 34

supported (max)

RAID support

Software
management

Warranty

Server warranty

license

SmartCache

Compatibility

IEEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 802.3u 100Base-TX

Method

Duplex)

10 Mb/s per port, 40 Mb/s combined

Duplex)

20 Mb/s per port, 80 Mb/s combined

Duplex)

100 Mb/s per port, 400 Mb/s combined

Duplex)

200 Mb/s per port, 800 Mb/s combined

(Half-Duplex)

1000Mb/s per port, 4000 Mb/s combined

(Full-Duplex)

2000Mb/s per port, 8000 Mb/s combined

Connector

Cable Support

10 Base-T

Categories 3, 4 or 5 UTP; up to 328 ft (100 m)

10/100/1000 Base-TX

Category 5 or higher UTP; up to 328 ft (100 m)

Hewlett Packard Enterprise
programs in many geographic areas. For trade
to:
to: http://www.hp.com/go/green

Drives

HPE Secure
Encryption

HPE
License

HPE Smart
Storage
Administrator

Up to 10 Internal Drives

0, 1, 10, 5 SATA

HPE SSA, SMH, SIM

Not Supported

Not Supported

Supported

HPE Ethernet
1Gb 2-port 332i
Adapter

Network
Interface

Ports

Data Transfer

Controller

Network
Transfer Rate

10Base-T/100Base-TX/1000Base-TX

PCI Express, two lanes (x2)

BCM5720

10Base-T (Half-

10Base-T (Full-

100Base-TX (Half-

100Base-TX (Full-

1000Base-TX

1000Base-TX

RJ-45

Environment­friendly
Products and

End-of-life
Management and
Recycling

Approach

offers end-of-life HPE product return, trade-in, and recycling

-in information, please go

http://www.hp.com/go/green. To recycle your product, please go

or contact your nearest Hewlett Packard Enterprise

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Technical Specifications

Page 35

sales office. Products returned to
or disposed of in a responsible manner.

The EU WEE
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the
at:
other WEEE treatment facilities as well as
who integrate and re-sell Hewlett Packard Enterprise equipment.

Hewlett Packard Enterprise will be recycled, recovered

E directive (2002/95/EC) requires manufacturers to provide treatment

Hewlett Packard Enterprise web site

http://www.hp.com/go/green. These instructions may be used by recyclers and

Hewlett Packard Enterprise OEM customers

QuickSpecs

HPE ProLiant ML30 Generation9 (Gen9)

Technical Specifications

Page 36

Date

Version History

Action

Description of Change

17

From Version 1 to 2

Added

Smart Buy models were added to the NA version.

Changed

Chipset, Pre
Power Supplies, HPE Tape Backup, Maximum
Storage Capacity, and Technical Specifications
were revised.

Sign up for updates

Rate this document

© Copyright 2015 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements acco
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.

Intel® and Xeon® are registered
Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of
companies.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less

c04

-Dec-2015

-Configure Models, HPE Drives, HPE

mpanying such products and services.

trademarks of Intel Corporation in the U.S. and other countries.

834998 - 15475 - North America - V2 - 17-December-2015