HPE ML150 Gen9 User Manual

Download

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Overview

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 1

HP ProLiant ML150 Generation9 (Gen9)

The HP ProLiant ML150 Gen9 Server delivers the essential mix of performance, price and expandability to fit the needs of growing budget conscious businesses. Designed as a dual-socket tower server, it is a right size tower with performance and expandability. With expansion options, it allows you to grow as needed with a low initial capital outlay. Covering a wide range of applications and workloads and addressing our customers from sophisticated SMB to large enterprise class server environments.

Front view details for Rack (SFF) and Tower (LFF)

Drive Cage (4 LFF shown) Alternative server choice would offer 8 SFF

USB 3.0 (2)

Media bay, Optional SATA 9.5mm DVD-ROM shown.

Media bay, blank shown.*

NOTE: *Optional choices: SATA 9.5mm DVD-ROM or DVD RW Optical Drive, Tape Drive, or LFF. NOTE: When populating 10 LFF, not able to install Tape Drive or Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or

3) 9LFF + 1 Tape Drive (Full/Half).

Media bay, blank shown.*

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Overview

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 2

+1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or

3) 9LFF + 1 Tape Drive (Full/Half).

Power On/Standby button and system power LED button

NIC status

Health LED

Rear View (Tower Model)

PCI Slots (Slots 1-6) Slot 1 and 3 can support Optional GPU

Unit ID LED

USB 2.0 (2)

USB 3.0 (2)

Video Connector

HP 550W Power Supply

Power supply Power LED

Power Supply Power connection

Cable tie back

10.

Network RJ-45 Ports (2)

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Overview

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 3

Interior View (Rack Model)

Power Supply

Sixteen (16) DDR4 DIMM slots. Shown fully populated in 16 slots (8 per processor)

System Fans: Three fans for 2P SKU

Internal USB 3.0 connector

Internal USB 2.0 connector

Two (2) processors and heatsinks with HP Smart Socket Guide (Second Processor is Optional)

Gen9 Smart Storage Battery Holder Kit

MicroSD slot

Dedicated iLO module slot

10.

Six (6) PCIe expansion slots

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Standard Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 4

NOTE: For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.

Intel® Xeon® processor E5-2600 v3 product family is designed to deliver the best combination of performance, built-in capabilities, and costeffectiveness. One (or two) of the following Intel® Xeon® E5-2600 v3 processors based on the model.

Processor One of the following depending on model

Model

CPU frequency

Cores L3 Cache

Power

QPI

DDR4 Hz

E5-2650Lv3

1.8GHz

30MB

65W

9.6GT/s

2133

E5-2640v3

2.6GHz

20MB

90W

8.0GT/s

1866

E5-2630v3

2.4Ghz

20MB

85W

8.0GT/s

1866

E5-2620v3

2.4GHz

15MB

85W

8.0GT/s

1866

E5-2609v3

1.9GHz

15MB

85W

6.4GT/s

1600

E5-2603v3

1.6GHz

15MB

85W

6.4GT/s

1600

NOTE: Up to 2 processors supported. Mixing different processor models is not supported. NOTE: Recommend to select 900W for 2P config. or check power advisor for power consumption for the customer usage

case.

Cache Memory One of the following depending on model

15MB (1 x 15MB) Level 3

NOTE: For Six-core processors.

20MB (1 x 20MB) Level 3

NOTE: For Eight-core processors.

30MB (1 x 30MB) Level 3

NOTE: For Twelve-core processors.

Chipset

Intel® C610 Series Chipset

Intel® E5-2600v3 Processor Family

NOTE: For more information regarding Intel® chipsets, please see the following URL:

http://www.intel.com/products/server/chipsets/.

On System Management Chipset

HP iLO (Firmware HP iLO4 2.0) 2GB NAND

NOTE: 1GB USB user space configurable via UEFI and accessible via iLO. Read and learn more in the iLO

QuickSpecs.

Memory

Type:

HP SmartMemory

DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)

DIMM Slots Available

16 Maximum Capacity (LRDIMM)

256GB

(16 x 16GB LRDIMM @2133MHz)

Maximum Capacity (RDIMM)

256GB

(16 x 16GB RDIMM @2133MHz)

NOTE: This server does not support mixing LRDIMMs or RDIMMs. Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS installation.

Memory Protection

Advanced ECC

Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

Online spare

Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.

Expansion Slots

Expansion

Slots #

Technology

Bus Width

Connector

Width

Bus Number

Form Factor

Notes

PCIe 3.0

Half Length/Full Height

For processor 1

PCIe 3.0

x16

Full Length/Full Height

For processor 1

PCIe 3.0

Half Length/Full Height

For processor 1

PCIe 3.0

x16

Full Length/Full Height

For processor 2

PCIe 3.0

Half Length/Full Height

For processor 1

PCIe 3.0

Half Length/Full Height

For processor 2

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Standard Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 5

NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.

NOTE: Six total expansion PCIe 3.0 slots. Two PCIe 3.0 x16 (x16 speed); Four PCIe 3.0 x 8 (x8 speed).

Expansion

Slots #

Technology

Bus Width

Connector

Width

Bus Number

Device

Number

Form Factor

Notes

HP ML Gen9

Dedicated

iLO Port Kit

Dedicate for ML

Series

Storage Controller One of the following depending on model

Entry Models

HP Dynamic Smart Array B140i Controller

NOTE: B140i can't mix with any standup internal controller.

Base Models

HP Dynamic Smart Array B140i Controller

NOTE: B140i can't mix with any standup internal controller.

Performance Models

HP H240 FIO Smart Host Bus Adapter

Internal Storage Devices

One of the following depending on model

Optical Drive

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

NOTE: Optical is optional in entry, base and performance BTO models. NOTE: ML150 Gen9 Slim ODD Enablement Kit (PN: 784603-B21) is required for any

DVD options.

Hard Drives

None ship standard

Hard Drive Bays

Up to 10 Non-hot plug SATA 3.5" drives

NOTE: Mixing drive cage types is not allowed. NOTE: All Pre-configured Models come populated with hard drive blanks installed.

The 4LFF configurations includes 2 blanks and 8SFF includes 6 blanks. Additional hard drive blanks can be ordered using either P/N 666986-B21 for the HP LFF HDD Blank Kit or P/N 666987-B21 for the HP SFF HDD Blank Kit. These part numbers for single HDD blanks below are also provided should you require replacement HDD blanks for your server.

NOTE: NHP SATA is limited to B140i controller. NOTE: When populate 10 LFF, not able to install any Tape Drive and Optical

Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half). NOTE: Must select two 4LFF NHP drive cage and 10LFF enablement kit if customer wants to support 10 LFF drives.

(4) Hot plug LFF SAS/SATA HDD bays; upgradable to (8)

(8) Hot plug SFF SAS/SATA HDD bays; upgradable to (16)

NOTE: 16SFF is limited to P840 controller. NOTE: H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21. NOTE: P84016SFF require 2 cable kit P/N: 784608-B21.

Maximum Internal Storage

One of the following depending on model

CAPACITY

CONFIGURATION

Hot Plug LFF SAS

60TB

10 x 6TB

Hot Plug LFF SATA

60TB

10 x 6TB

Hot Plug SFF SAS

19.2TB

16 x 1.2TB

Hot Plug SFF SATA

16TB

16 x1TB

Non-Hot Plug LFF SATA

30TB

10 x 3TB

Hot Plug LFF SAS SSD

16TB

10 x 1.6TB

Hot Plug LFF SATA SSD

16TB

10 x 1.6TB

Hot Plug SFF SAS SSD

25.6TB

16 x 1.6TB

Hot Plug SFF SATA SSD

25.6TB

16 x 1.6TB

Power Supply

One of the following depending on model

HP 550W FIO Power Supply

HP 800W/900W Gold AC Power Input Module

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Standard Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 6

HP Entry-Level Power Supplies provide lower-cost options for customers trying to balance their need for enterprise class efficiency and reliability while maintaining lowest possible hardware costs. All Entry-Level power supply options have been designed specifically for HP ProLiant Gen9 Essential Series servers.

The HP 550W FIO Power Supply is the standard, non-redundant AC power supply option for most HP ProLiant Gen9 Essential servers. It features Silver-level (89%) certified power efficiency with a set of features optimized for the Gen9 Essential-series rack and tower servers.

The HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module with Power Backplane can be configured to support power redundancy in ProLiant servers that offer only a single power supply bay, providing additional protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power option helps to reduce operating expenses while protecting against trapped power capacity in the data center. Each power backplane option can support up to two (2) hot-plug AC power input modules.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the

ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HP Power Advisor Tool located at

http://www.hp.com/go/hppoweradvisor.

Power specifications and technical content for all HP Server power supplies can be found at

http://www.hp.com/go/proliant/powersupply.

Rack Options One of the following depending on model

HP T/R CONV TRAY UNIVERSAL Kit

System Fans

One of the following depending on model

Non-redundant

Redundant

1P model

2 fans

NOTE: Two (2) Non-hot plug, non-redundant fans ship as standard.

Non-redundant

Redundant

2P model

3 fans

NOTE: Third fan is shipped with 2nd CPU Kit. Third fan is only required in 2P configurations.

Interfaces

Video

1 (rear)

Network RJ-45 (Ethernet)

HP iLO Remote Management Network Port

2 Gb Dedicated Micro SD Slot

1 (internal)

NOTE: The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro-SD card into the Micro-SD slot while the server is powered.

USB 3.0

5 (2 rear, 1 internal, 2 front )

USB 2.0

3 (2 rear, 1 internal)

Operating Systems and Virtualization Software Support for ProLiant Servers

Microsoft Windows Server

Canonical Ubuntu

Red Hat Enterprise Linux (RHEL)

SUSE Linux Enterprise Server (SLES)

VMware

Oracle Solaris

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at:

http://www.hp.com/go/ossupport and our driver download page http://www.hp.com/support/ML150Gen9.

Upgradeability

Upgradeable to two processors (24 cores)

NOTE: Total 6, 8, 12cores.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Standard Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 7

Up to 16 SFF Hard Drive Bays; Or 10 LFF Hard Drive Bays Up to 16 DIMM slots Redundant Power Supply Tower to rack conversion Optional optical drive (up to 1)

NOTE: When populate 10 LFF, not able to install Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half).

Industry Standard Compliance

ACPI 2.0b Compliant

PCIe 3.0 Compliant

PXE Support

WOL Support

Novell Certified

IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

Microsoft® Logo certifications

USB 3.0 Support

SMBIOS 2.7.1

ASHRAE A3

Graphics

HP NVIDIA Quadro K2200 GPU Module

HP Server UEFI/Legacy ROM

HP Server UEFI /Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration while interacting with your server at boot time. HP ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS Boot Mode.

NOTE: The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hp.com/go/proliantuefi/docs.

UEFI enables numerous new capabilities specific to HP ProLiant servers such as:

 Secure Boot  Operating system specific functionality  Support for > 2.2 TB (using GPT) boot drives  USB 3.0 Stack  Embedded UEFI Shell  Mass Configuration Deployment Tool using HP RESTful API.  PXE boot support for IPv6 networks  Boot support for option cards that only support a UEFI option ROM

For more information please visit http://www.hp.com/go/proliant/uefi.

NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support

UEFI.

NOTE: HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory.

Form Factor

Tower or Rack (5U)

Embedded Management

HP Integrated Lights-Out (HP iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote management with HP iLO. Learn more at http://www.hp.com/go/ilo.

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at http://www.hp.com/go/ProLiant/uefi.

HP RESTful API

RESTful API is an application programming interface. RESTful Web Service API served by

iLO’s web server: Learn more at http://www.hp.com/go/restfulapi.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Standard Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 8

Intelligent Provisioning

Provision servers by discovering and deploying 1 to few servers with Intelligent Provisioning. Learn more at http://www.hp.com/go/intelligentprovisioning.

Embedded Remote Support

HP’s embedded remote support, when used with Insight Online direct connect or HP Insight Remote Support, allows HP ProLiant servers to transmit hardware events directly to HP or an HP Authorized Partner for automated phone home support. Learn more at http://www.hp.com/go/insightonline/info.

Server utilities

HP Smart Update

Optimize firmware and driver updates with HP Smart Update solutions. Learn more at

http://www.hp.com/go/smartupdate.

HP Systems Insight Manager (HP SIM)

HP SIM allows you to monitor the health of your HP ProLiant Servers and HP Integrity Servers, and also provides you with basic support for non-HP servers. HP SIM also integrates with HP SUM to provide quick and seemless firmware updates. Learn more at http://www.hp.com/go/sim.

Scripting Tool Kit and Windows PowerShell

Provision 1 to many servers using your own scripts to discover and deploy them with HP Scripting Tool Kit for Windows and Linux or HP Scripting Tools for Windows PowerShell. Learn more at http://www.hp.com/go/ProLiantSTK or http://www.hp.com/go/powershell.

HP RESTful Interface Tool

HP RESTful Interface tool is a scripting tool to provision servers using RESTful API Interface to discover and deploy servers at scale. Learn more at

http://www.hp.com/go/restfulapi.

HP iLO Mobile Application

Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit:

http://www.hp.com/go/ilo/mobileapp.

HP Insight Online

HP Insight Online, available at no additional cost as part of your HP warranty, Care Pack or contractual support agreement with HP, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at

http://www.hp.com/go/insightonline/info.

NOTE: The Service Pack for ProLiant (which includes HP SUM) can be downloaded from

http://www.hp.com/go/spp/download. More information can be found: http://www.hp.com/go/SmartUpdate, http://www.hp.com/go/spp and http://www.hp.com/go/hpsum.

Security

Power-on password

Setup password

Serial interface control

Power switch security

Administrator's password

TPM 1.2

UEFI

Warranty

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Optional Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 9

Embedded Management

iLO Essentials

HP iLO Essentials is the preferred license for small and medium business that offers full remote server management capabilities for small and medium business via the Integrated Remote Console (IRC), virtual media, and e-mail based alerts. Learn more about HP iLO Essentials at http://www.hp.com/go/iLO/essentials.

iLO Scale-Out

HP iLO Scale-Out is the preferred license built for web hosting, cloud service providers, and high performance computing data centers, managing massive scale out environments. This license offers sophisticated scripting tools that provides remote access through Text Console via SSH, Dynamic power capping, Email-based Alerting and proactive notifications. For more information, visit http://www.hp.com/go/iLO/scale-out.

iLO Advanced

HP iLO Advanced licenses offer smart remote functionality without compromise, for all HP ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based and scripted virtual media and virtual folders. You can also activate the enhanced security and power management functionality. Learn more about HP iLO Advanced at

http://www.hp.com/go/iloadvanced.

Server Management

HP Insight Control

HP Insight Control, lets you deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see

http://www.hp.com/go/insightcontrol.

High Performance Clusters

HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-supported suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective. http://www.hp.com/go/cmu.

HP Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator simplifies ordering. http://www.hp.com/go/clusters.

HPC Interconnects

NOTE: High Performance Computing (HPC) interconnect technologies are available for this server under the HP

Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand Interconnects:

http://www.hp.com/techservers/clusters/ucp/index.html.

Storage Software

Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HP storage software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and respond faster to business opportunities. Storage software that gets the job done:

 Data Protection and Recovery Software

Whether you're a large enterprise or a smaller business, HP data protection and recovery software will cost-effectively protect you against disaster and ensure business continuity.

 Data Archive and Migration Software

HP's storage software enables you to comply with data retention and retrieval requirements, improve application performance, and reduce costs by efficiently migrating infrequently accessed or less valuable data to lower cost storage.

 Storage Resource Management Software (SRM)

HP's storage resource management software reduces operational costs and provides the command and control foundation you need to efficiently manage and visualize your physical and virtual environments.

 Data Replication Software

HP offers array-based and host-based replication software for use in disaster recovery, testing, application development and reporting.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Optional Features

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 10

 Storage Device Management Software

Maximize your investment in HP storage and networking with software that enables hardware-specific configuration, performance tuning and connectivity management.

 HP StoreVirtual VSA

With HP StoreVirtual VSA you can use the power of virtualization to create a virtual array within your host server. Manage it as a single pool of shared storage capacity, and scale it to match your evolving needs. HP ProLiant Gen9 servers include a 3-year limited license for HP StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install HP StoreVirtual VSA software during server setup within Intelligent Provisioning. More information, instructional videos, and free console management software are available at http://www.hp.com/go/vsa1TB.

NOTE: For more information about Storage Software including QuickSpecs, please see:

http://www.hp.com/go/storage/software.

One Config Simple (SCE)

SCE is a guided self service tool to help sales and non technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Service and Support

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 11

Service and Support

HP Technology Services for Industry Standard Servers

HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere, any time.

Protect your business beyond warranty with HP Care Pack Services HP Care Pack Services enable you to order the right service level, length of coverage and response time as you purchase your new server, giving you full entitlement for the term you select.

Optimized Care

Supports maintaining servers at optimum performance availability

HP Proactive Care with 24x7 coverage, three year Care Pack Service

HP Proactive Care helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics and proactive consultations when your products are connected to HP. This Care Pack Service combines three years’ proactive reporting and advice with our 24x7 coverage and enhanced escalation management, four hour hardware response time and two hour call back for software questions on leading industry standard software running on your HP ProLiant server. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Standard Care Package

Supports maintaining high level of server availability

Foundation Care 24x7, three-year Care Pack Service

HP Foundation Care 24x7 connects you to HP 24 hours a day, seven days a week for assistance on resolving issues. Hardware onsite response within four hours if needed; collaborative software included in this Care Pack service provides troubleshooting assistance on industry leading software running on your HP server. Simplify your support experience and make HP your first call for hardware or software questions.

http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en

Related Services

HP ProLiant Server Hardware Installation

Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN.pdf

Factory Express for Servers and storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. For more information on Factory Express services for your specific server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.

Data Privacy Services Protect your data through better media management. HP Data privacy services help manage and protect sensitive data to reduce the risk of unauthorized access to private information and help meet compliance requirements. Our retention services allow you to keep drives and other devices upon failure, our removal services provide convenient data sanitization and our recovery services allow you to safely retire IT assets and capture any remaining value from the hardware. http://www.hp.com/services/dataprivacy

Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc

Get connected to HP to improve your support experience

Prevent problems with innovative, automated monitoring tools and proactive services. Combining Proactive Care Services with our remote support technology such as Insight Online provides you with expert advice and personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve problems quickly. For more information, visit: http://www.hp.com/go/proactiveinsightexperience

HP Support Center

Personalized online support portal with access to information, tools and experts to support HP business products. Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more

http://www.hp.com/go/hpsc

HP's Support Center Mobile App** allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Service and Support

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 12

HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP Care Pack or HP contractual support agreement.

** HP Support Center Mobile App is subject to local availability.

Parts and Materials

HP will provide HP-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HP due to malfunction.

For more information

To learn more on HP ProLiant servers, please contact your HP sales representative or HP Authorized Channel Partner or visit: http://www.hp.com/services/proliant

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Pre-configured Models

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 13

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.

2. HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.

3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this QuickSpecs.

4. Not all models are available in all regions. Check with your local country HP offices for availability.

NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Hard Drive Blank Kit or P/N 666986-B21: HP LFF Hard Drive Blank Kit. NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.

Caution: HP recommends that a minimum of two people are required for all Rack Server installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.

Entry Models

Base Models

[SKU Number]

776274-xx1

776275-xx1

Model Name

HP ProLiant ML150 Gen9 E5-2603v3 4GB B140i

Non-hot Plug 4LFF SATA Entry 550W PS Server

HP ProLiant ML150 Gen9 E5-2609v3 8GB B140i

Hot Plug 4LFF SATA Base 550W PS Server

Processor

Intel® Xeon® E5-2603v3

Intel® Xeon® E5-2609v3

Number of Processors

One

Memory

4GB (1x4GB Registered DIMMs, 2133 MHz)

8GB (1x8GB Registered DIMMs, 2133 MHz)

Network Controller

Broadcom 5717 Dual-port 1GbE

Storage Controller

HP Dynamic Smart Array B140i

Hard Drive

None ship standard

Internal Storage

4 LFF HDD Bays (Non Hot Plug)

4 LFF HDD Bays

Optical Drive Bay

1; (Optional: DVD-ROM, DVD-RW)

Optical Drive

Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)

PCI-Express Slots

6 PCIe slots

Power Supply

(1) HP 550W FIO Power Supply

Fans

2 non hot plug, non redundant fans

Management

Mid-tier iLO with 2GB NAND

Form Factor

Tower (5U)

Warranty

Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business

day response.

Performance Models

[SKU Number]

776276-xx1

Model Name

HP ProLiant ML150 Gen9 E5-2620v3 16GB H240 Hot Plug 8SFF SAS Perf 900W PS Server

Processor

Intel® Xeon® E5-2620v3

Number of Processors

One

Memory

16GB (1x16GB Registered DIMMs, 2133 MHz)

Network Controller

Broadcom 5717 Dual-port 1GbE

Storage Controller

HP H240 Smart Host Bus Adapter

NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is included while order Performance Model

with H240 Storage Controller

Hard Drive

None ship standard

Internal Storage

8 SFF HDD Bays

Optical Drive Bay

1; (Optional: DVD-ROM, DVD-RW)

Optical Drive

Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)

PCI-Express Slots

6 PCIe slots

Power Supply

(1) HP 900W FIO Power Supply

Fans

2 non hot plug, non redundant fans

Management

Mid-tier iLO with 2GB NAND

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Pre-configured Models

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 14

Form Factor

Tower (5U)

Warranty

Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business

day response.

Country Code Key

xx1 = B21

Worldwide

xx1 = 001

xx1 = 031

UK xx1 = 291

Japan

xx1 = 371

AP xx1 = 421

EU xx1 = AA1

PRC

NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Configuration Information - Factory Integrated Models

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 15

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

2. FIO indicates that this option is only available as a factory installable option.

3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.

4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.

Step 1: Base Configuration (choose one of the following configurable models)

[Chassis]

HP ProLiant ML150 Gen9 Non-hot

Plug 4LFF Configure-to-order

Server

HP ProLiant ML150 Gen9 Hot Plug

4LFF Configure-to-order Server

HP ProLiant ML150 Gen9 Hot Plug

8SFF Configure-to-order Server

SKU Number

767062-B21

767063-B21

767064-B21

Processor

2 (optional) x HP Smart Socket Guides

DIMMSlots

16 DIMM slots for RDIMM, LRDIMM DDR4 Memory

Storage Controller

HP Dynamic Smart Array B140i

PCIe

6 Standard (4FH/HL, 2FH/FL)

Drive Cage

4LFF Non Hot Plug

4LFF Hot Plug

8LFF Hot Plug

Network Controller

Broadcom 5717 Dual-port 1GbE

Fans

2 non hot plug, non redundant fans

Management

Mid-tier iLO with 2GB NAND

USB

2 front, 2 internal, 4 rear

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

HP Processors

Select one or two processors from Core options-Processor section below,

 If one processor is desired, select one xxxxxx-L21  If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.  Up to 2 processors supported. Mixing different processor models is not supported.  DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the

quantity and type of DIMMs installed. For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7); 2600x v#, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and v# (not yet designated) = version number.

HP Memory

Select one or more memory from Core options-Memory section below,

 LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server. The majority of

ProLiant Gen9 servers support LRDIMM and RDIMM.

 HP memory from previous generation servers are not qualified or warranted with this HP ProLiant Server.

HP SmartMemory is required to realize the memory performance improvements and enhanced functionality

listed in this document for Gen9.

 If only one processor is installed, only half of the total DIMM slots are available. When populating with two

processors all DIMM slots are available.

 Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features,

see: http://www.hp.com/go/proliant-energy-efficient.

 Depending on the memory configuration and processor model, the memory speed may run at 2133MHz,

1866MHz, 1600MHz or 1333MHz. Please see Memory Population Table or the Online Memory Configuration

Tool at: http://www.hp.com/go/ddr4config.

HP Power Supplies

Select one or more power supplies from Core Options-Power Supplies section below:

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Configuration Information - Factory Integrated Models

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 16

 Prior to selecting a power supply option, it is highly recommended that you review your server configuration

in the HP Power Advisor tool to determine the right size power supply for your server configuration. The HP

Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.

 Mixing of power supplies in the same server is not supported. All power supplies must be of the same input

voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you may receive

an error message and/or experience operational issues with your server.

Step 3: Choose Additional Factory Integratable Options

HP Networking

Select a standup NIC adapter from Core options-Networking section below,

 Please see the QuickSpecs for Technical Specifications and additional

information: http://www.hp.com/go/ProLiantNICs.

 These options are upgradeable and can be changed from the original configuration after the server is

shipped.

 For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each adapter.

HP Drives

Select one or more drives from Core options-HP Drives section below:

 The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server

backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down

to an acceptable level for all components.

 Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for

details.

 The HP ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form Factor (SFF 2.5 in)

and Large Form Factor (LFF 3.5 in) hot plug carriers for HP Qualified Hard Drives and Solid State Drives.

These new carriers provide status and activity indicators as well as caution indicators for "Do Not Remove".

HP Graphics Options

Select one or more graphics adapter from Additional options section below.

 Please see the HP Power Advisor for estimated power consumption of your individual system configuration

prior to installing GPUs. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.

 This section may contain FIO options, please see HP Computation & Graphics Accelerators section below.

HP Unique Options

Select one or more Unique options from Core options section below.

 This section may contain FIO options, please see the Unique options section below.  FIO indicates that this option is only available as a factory installable option.

HP Cooling Options

Select one or more Fan Kits from Core options section below.

 This section may contain FIO options, please see HP Cooling Options section below.  FIO indicates that this option is only available as a factory installable option.

HP Storage Controllers

Select one or more Storage options from Additional options section below.

 The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller

will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22

 This section may contain FIO options, please see HP Storage Controllers section below.  FIO indicates that this option is only available as a factory installable option.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Core Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 17

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information.

HP Unique Options

HP ML150 Gen9 4LFF Hot Plug Drive Cage

NOTE: Adding 4LFF Hard Drive Cage allow up to 8FF Drive Bays.

725872-B21

HP ML150 Gen9 8SFF Hot Plug Drive Cage

NOTE: Adding 8SFF Hard Drive backplane allow up to 16SFF Drive Bays.

725874-B21

HP ML150 Gen9 4LFF Non-hot Plug Drive Cage

NOTE: Adding 4LFF Hard Drive Cage allow for up to 8LFF Drive Bays.

779859-B21

HP ML150 Gen9 PCI Baffle Kit

NOTE: Must select when a PCIe card is installed with any Networking, Controllers (SAS, SCSI and Fiber Channel), Graphic options.

779861-B21 HP ML150 Gen9 Slim ODD Enablement Kit

NOTE: Must select with the ODD option.

784603-B21

HP ML150 Gen9 Smart Storage Battery Holder Kit

NOTE: Must select when install Smart Store Battery PN: 727258-B21. NOTE: Must select when install P440/840 FIO controller PN: 761872-B21/761874-B21. NOTE: Must select when support upgrade battery.

786710-B21

HP ML150 Gen9 9/10LFF Drive Enablement Kit

NOTE: When populate 10 LFF, not able to install any Tape Drive or Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive (Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half). NOTE: Must select both 4LFF NHP drive cage and 10LFF enablement kit if plan to expand to 10LFF.

NOTE: Only support NHP SATA HDD. NOTE: Must select P840/4G controller.

788567-B21

HP ML150 Gen9 Dedicated iLO Management Port Kit

780310-B21

HP ML150 Gen9 Mini SAS H240 Cable Kit

NOTE: Must be selected for H240 controller. 1 cable kit is required for Hot Plug 4LFF. 2 cable kits are required for below:

- Hot Plug 4+4 LFF (with additional drive cage)

- 8SFF

784606-B21

HP ML150 Gen9 Mini SAS P440/P840 Cable Kit

NOTE: Must be selected for P440/P840 controller. 1 cable kit is required for P440x1. 2 cable kits are required for P840x1.

784608-B21

HP Tower to Rack Conversion Tray Universal Kit

417705-B21

HP AHCI-Enable FIO Setting

NOTE: This needs to be selected when Advanced Host Controller Interface mode is required on B140i controller.

801845-B21

HP Processors

Entry Processors - E5-2600v3 series Processors

HP ML150 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit

726663-B21

HP ML150 Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit

726663-L21

HP ML150 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit

726660-B21

HP ML150 Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit

726660-L21

Base Processors - E5-2600v3 series Processors

HP ML150 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit

726657-B21

HP ML150 Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit

726657-L21

HP ML150 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit

726653-B21

HP ML150 Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit

726653-L21

HP ML150 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit

726650-B21

HP ML150 Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit

726650-L21

Performance Processors - E5-2600v3 series Processors

HP ML150 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit

726667-B21

HP ML150 Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit

726667-L21

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Core Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 18

NOTE: Recommend to select 900W for 2P configurations or check power advisor for power consumption for the customer usage case.

HP Memory

Registered DIMMs (RDIMMs) for E5-2600v3 Series

HP 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726717-B21

HP 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726718-B21

HP 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

759934-B21

HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726719-B21

Load Reduced DIMMs (LRDIMMs) for E5-2600v3 Series

HP 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit

726720-B21

HP Optical Drives

HP 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive

726536-B21

HP 9.5mm SATA DVD-RW JackBlack G9 Optical Drive

726537-B21

HP ML150 Gen9 Slim ODD Enablement Kit

NOTE: Must be selected with the ODD option. NOTE: Must select ODD enablement kit, one kit per ODD.

784603-B21

HP Drives

NOTE: User may select any combination of SAS or SATA Hard Drives.

However, if RAID is selected and both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used in the RAID set.

NOTE: If B140i is the primary controller, user can only select SATA drives. NOTE: User may select any combination of SAS or SATA Hard Drives.

However, if RAID is selected and both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used in the RAID set.

NOTE: SAS drives require the selection of a SAS controller. See card lists in Controllers section.

SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives

HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive

718162-B21

HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652589-B21

HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759212-B21

HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652583-B21

HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759210-B21

HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652572-B21

HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759208-B21

HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652564-B21

HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652605-B21

SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652745-B21

HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652749-B21

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive

737394-B21

HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive

737261-B21

HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr Warranty Hard Drive

765424-B21

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

761477-B21

HP 4TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

695510-B21

HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652766-B21

HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652757-B21

HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

652753-B21

SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives

HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655710-B21

HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655708-B21

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Core Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 19

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

753874-B21

HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

693687-B21

HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

628061-B21

HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

658079-B21

HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

657750-B21

HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive

658071-B21

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive

628065-B21

HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive

659337-B21

HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive

659339-B21

HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty Hard Drive

659341-B21

12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives

HP 800GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid State Drive

741159-B21

HP 400GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid State Drive

741155-B21

HP 200GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid State Drive

741151-B21

12G SAS Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives

HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive

741146-B21

HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive

741142-B21

HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive

741138-B21

12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives

HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

762263-B21

HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

762261-B21

12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives

HP 800GB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive

762270-B21 HP 1.6TB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive

762272-B21

6G SATA Hot Plug LFF (3.5-inch) Enterprise Light G1 Solid State Drives

HP 960GB 6G SATA Light Endurance LFF 3.5-in SC Converter ENT Light 3yr Wty G1 Solid State Drive

756604-B21

6G SATA Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives

HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

757339-B21

HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756657-B21

HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756636-B21

HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756621-B21

6G SATA Hot Plug SFF (2.5-inch) Enterprise Light G1 Solid State Drives

HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State Drive

756601-B21

6G SATA Hot Plug LFF Value Endurance (3.5-inch) Converter Enterprise Value G1 Solid State Drives

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Core Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 20

HP 1.6TB 6G SATA Value Endurance LFF 3.5-in SC Converter Enterprise Value 3yr Wty Solid State Drive

757342-B21

HP 480GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid State Drive

756660-B21

HP 240GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid State Drive

756639-B21

HP 120GB 6G SATA Value Endurance LFF 3.5-in SC Converter ENT Value 3yr Wty G1 Solid State Drive

756624-B21

Hard Drive Blank Kits

HP Large Form Factor Hard Drive Blank Kit

666986-B21

HP Small Form Factor Hard Drive Blank Kit

666987-B21

HP Networking

1 Gigabit Ethernet adapters

HP Ethernet 1Gb 4-port 331T Adapter

647594-B21

HP Ethernet 1Gb 2-port 361T Adapter

652497-B21

HP Ethernet 1Gb 2-port 332T Adapter

615732-B21

10 Gigabit Ethernet adapters

HP Ethernet 10Gb 2-port 560SFP+ Adapter

665249-B21

HP Ethernet 10Gb 2-port 561T Adapter

716591-B21

HP Power Supplies

HP Entry-Level Power Supplies

HP 550W FIO Power Supply Kit

NOTE: The above power supply option is 80Plus Silver-certified with an efficiency rating of up to 89%. Power specifications and technical content for all HP Server power supplies can be found at http://www.hp.com/go/proliant/powersupply.

730941-B21

HP Server Redundant Power Supply Backplane Kit

745813-B21

HP 800W Gold (Redundant)/900W (Non-Redundant) AC Power Input Module

NOTE: The above power supply option is 80Plus Gold-certified with an efficiency rating of up to 92%. Each power backplane kit (745813-B21) can support up to two (2) AC power input modules (744689-B21). Power specifications and technical content for all HP Server power supplies can be found at http://www.hp.com/go/proliant/powersupply. NOTE: HP 800W/900W Gold AC Power Input Module only support up to maximum 800W redundant with 2 x 900W power module. NOTE: Must select power backplane along with 900W power module: 900w power module x 1 requires 900W power backplane x 1 (Non-redundant PSU) 900w power module x 2 requires 900W power backplane x 1 (Redundant PSU) NOTE: Recommend to select 900W for 2P configurations or check power advisor for power consumption for the customer usage case. Power specifications and technical content for all HP Server power supplies can be found at

http://www.hp.com/go/proliant/powersupply.

744689-B21

HP Computation and Graphics Accelerators

HP NVIDIA Quadro K2200 Graphics Accelerator

NOTE: Must select 2 processor if 2 graphic cards are selected. NOTE: Must select 900W power supply when 2 graphic cards are selected.

J0G89A

NOTE: Only the above listed Graphics cards are HP standard supported options in this server. NOTE: The NVIDIA Quadro modules are supported only on 64-bit versions of Linux and Windows operating systems

as well as on Virtual Machine client operating systems. The supported bare metal operating systems are RHEL6, SLES 11 and Windows Server 2012 R2. NOTE: Please see the HP Power Advisor for estimated power consumption of your individual system configuration prior to installing GPUs. The HP Power Advisor is located at: http://www.hp.com/go/hppoweradvisor.

HP Cooling Options

HP ML150 Gen9 PCI Baffle Kit

NOTE: Must be selected when a PCIe card is installed with any Networking, Controllers (SAS, SCSI and Fiber Channel), Graphic options.

779861-B21

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 21

Embedded Management

HP iLO Advanced

HP iLO Advanced 1 Server License with 3yr 24x7 Tech Support and Updates

BD505A

HP iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU

E6U59ABE

HP iLO Advanced including 1yr 24x7 Technical Support and Updates Single Server License

512485-B21

HP iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU

E6U64ABE

HP iLO Essentials

HP Integrated Lights-Out Essentials including 3yr 24x7 Tech Support and Updates Single Svr License

BD774A

HP Integrated Lights-Out Essentials including 1yr 24x7 Tech Support and Updates Single Svr License

BD775A

HP Integrated Lights-Out Essentials including 3yr 24x7 Technical Support and Updates ELTU

E6U61ABE

HP Integrated Lights-Out Essentials including 1yr 24x7 Technical Support and Updates ELTU

E6U62ABE

High Performance Clusters

HP Insight Cluster Management Utility

HP Insight Cluster Management Utility 3yr 24x7 Flexible License

BD476A

HP Insight Cluster Management Utility 1yr 24x7 Flexible License

NOTE: These part numbers can be used to purchase one certificate for multiple licenses and support with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment. The license entitlement certificate must be redeemed online in order to obtain a license key. Customer also will receive a support agreement.

QL803B

HP Insight Cluster Management Utility Media

BD477A

HP Storage Controllers

SAS Controller

HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller

726821-B21

HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller

726825-B21

HP Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller

726897-B21

HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller

NOTE: Smart Storage Battery included. NOTE: Must select battery holder PN: 786710-B21 when purchase P440. NOTE: B140i can't mix with any standup internal controller. NOTE: HP ML150 Gen9Mini SAS P440/P840 Cable Kit must be selected PN: 784606-B21 for

P440 controller (1 cable kit is required for P440x1). NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order H240 controller card.

761872-B21

HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller

NOTE: Smart Storage Battery included. NOTE: B140i can't mix with any standup internal controller. NOTE: Must select P840/4G FIO Controller when additional drive cage is selected. NOTE: Must select P840/4G Controller when apply 16SFF. NOTE: Must select battery holder when purchase P440 PN: 786710-B21. NOTE: HP ML150 Gen9Mini SAS P440/P840 Cable Kit must be selected PN: 784606-B21 for

P840 controller (2 cable kits are required for P840x1). NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order controller card.

761874-B21

SAS Controller Options

HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers

727258-B21

HP Host Bus Adapter

HP H240 12Gb 2-ports Int Smart Host Bus Adapter

726907-B21

HP H241 12Gb 2-ports Ext Smart Host Bus Adapter

726911-B21

HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter

761873-B21

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 22

NOTE: Must selectd for H240 controller. 1 cable kit is required for Hot Plug 4LFF. 2 cable kits are required for below:

- Hot Plug 4+4 LFF (with additional drive cage)

- 8SFF

NOTE: If H240 is the primary controller and if HP Mfg FIO Enable HBA Mode Setting is selected, then RAID is not allowed.

NOTE: B140i can't mix with any standup internal controller. NOTE: HP ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required while order controller card.

HP Cable Options

HP ML150 Gen9 Mini SAS H240 Cable Kit

784606-B21

HP ML150 Gen9 Mini SAS P440/P840 Cable Kit

784608-B21

Battery Holder

HP ML150 Gen9 Smart Storage Battery Holder Kit

786710-B21

HP Tape Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape. For

hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK and

http://www.hp.com/go/ebs.

NOTE: Must select SAS controller to support internal SAS tape drives. NOTE: Tape drive and HDD total amount can't exceed SAS controller support qty.

Tape Drives

HP StoreEver 1/8 G2 LTO-6 Ultrium 6250 FC Tape Autoloader

C0H19A

HP StoreEver LTO-6 Ultrium 6250 Tape Drive in 1U Rack-mount Kit

C0L99A

HP StoreEver LTO-4 Ultrium 1760 SAS (1) in 1U Rack-mount Kit

EH946C

HP StoreEver LTO-5 Ultrium 3000 SAS Tape Drive in 1U Rack-mount

EJ014B

HP StoreEver LTO-5 Ultrium 3280 SAS Tape Drive in 3U Rack-mount

EJ013B

HP StoreEver 1U SAS Rack-mount Kit

AE459B

HP StoreEver LTO-6 Ultrium 6650 SAS Internal Tape Drive

EH963A

HP StoreEver LTO-6 Ultrium 6650 SAS External Tape Drive

EH964A

HP StoreEver LTO-6 Ultrium 6250 Internal Tape Drive

EH969A

HP StoreEver LTO-5 Ultrium 3000 SAS Internal Tape Drive

EH957B

HP StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive

EH958B

HP StoreEver LTO-5 Ultrium 3280 SAS Internal Tape Drive

EH899B

HP StoreEver LTO-5 Ultrium 3280 SAS External Tape Drive

EH900B

HP StoreEver LTO-6 Ultrium 6250 External Tape Drive

EH970A

HP StoreEver LTO-4 Ultrium 1760 SAS Internal WW Tape Drive

EH919B

HP StoreEver LTO-4 Ultrium 1760 SCSI External Tape Drive

EH922B

HP StoreEver LTO-3 Ultrium 920 SCSI External Tape Drive

EH842B

HP Mini-SAS Cable for LTO Internal Tape Drive

AP746A

HP Mini-SAS Cable for DAT Internal Tape Drive

AP747A

HP Tape Storage Systems HP StoreEver MSL6480

HP StoreEver MSL6480 Scaleable Expansion Module

QU626A

HP StoreEver MSL6480 Scalable Base Module

QU625A

HP MSL2024 0-Drive Tape Library

AK379A

HP MSL4048 0-Drive Tape Library

AK381A

HP Power Distribution Units (PDUs)

HP Basic Power Distribution Unit (bPDU)

HP 1.9kVA 120 Volt L5-20 Input (12xNEMA 5-20R) NA/JP Basic PDU

H5M54A

HP 3.6kVA 200-240 Volt Detachable C20 Input ( 12xC13) WW Basic PDU

H5M56A

HP 2.8kVA 120 Volt L5-30 Input (18xNEMA 5-20R) NA/JP Basic PDU

H5M55A

HP 3.6kVA 200-240 Volt Detachable C20 Input (18xC13) WW Basic PDU

H5M57A

HP 4.9kVA 208 Volt L6-30 Input (20xC13) NA/JP Basic PDU

H5M58A

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 23

HP 7.3kVA 230 Volt IEC309 32A Input (20xC13) INTL Basic PDU

H5M68A

HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13) NA/JP Basic PDU

H5M61A

HP 4.9kVA 208 Volt L6-30 Input (24xC13/6xC19) NA/JP Basic PDU

H5M59A

HP 7.3kVA 230 Volt IEC309 32A Input (24xC13/6xC19) INTL Basic PDU

H5M70A

HP 8.3kVA 208 Volt CS8265C Input (30xC13/6xC19) NA/JP Basic PDU

H5M60A

HP 11kVA 230 Volt IEC309 63A Input (30xC13/6xC19) INTL Basic PDU

H5M71A

HP Hardwired 200-240 Volt Input (30xC13/6xC19) WW Basic PDU

H5M75A

HP 5.7kVA 208 Volt L21-20 3-Phase Input (24xC13/3xNEMA 5-20R) NA/JP Basic PDU

H5M63A

HP 8.6kVA 208 Volt L21-30 3-Phase Input (24xC13/3xC19/3xNEMA 5-20R) NA/JP Basic PDU

H5M64A

HP 8.6kVA 208 Volt L15-30 3-Phase Input (24xC13/6xC19) NA/JP Basic PDU

H5M62A

HP 11kVA 400 Volt IEC309 16A 3-Phase Input (30xC13/6xC19) INTL Basic PDU

H5M72A

HP 11kVA 400 Volt IEC309 16A 3-Phase Input (36xC13/6xC19) INTL Basic PDU

H5M73A

HP 11kVA 400 Volt IEC309 30A 3-Phase Input (36xC13/6xC19) NA Basic PDU

H5M67A

HP 13.2kVA 480 Volt IEC309 30A 3-Phase Input (15 Outlet) NA Basic PDU

H3X07A

HP 19.9kVA 480 Volt IEC309 30A 3-Phase Input (30 Outlet) NA Basic PDU

H3X08A

HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer

H3X09A

HP 2.8kVA 24A Low Voltage NA/JP Modular Power Distribution Unit

252663-D71

HP 4.9kVA 24A High Voltage NA/JP Core Modular Power Distribution Unit

252663-D74

HP 8.3kVA 40A High Voltage NA/JP Core Modular Power Distribution Unit

252663-D75

HP 7.3kVA 32A High Voltage INTL Core Modular Power Distribution Unit

252663-B33

HP 9.2kVA 40A High Voltage INTL Core Modular Power Distribution Unit

252663-B34

HP 8.6kVA 24A Three Phase NA/JP Modular Power Distribution Unit

AF512A

HP 11kVA 16A Three Phase INTL Modular Power Distribution Unit

AF513A

HP 14.4kVA 40A Three Phase NA/JP Modular Power Distribution Unit

AF519A

HP 17.3kVA 48A Three Phase NA/JP Modular Power Distribution Unit

AF511A

HP 22kVA 32A Three Phase INTL Core Modular Power Distribution Unit

AF518A

NOTE: To learn more about HP Basic Power Distribution Units (bPDU), please visit the HP website at

http://www.hp.com/go/pdu.

HP Monitored Power Distribution Units (mPDU)

HP 2.8kVA 120 Volt L5-30 Input (12xNEMA 5-20R)NA/JP Monitored PDU

D9N43A

HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU

D9N46A

HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU

D9N44A

HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU

D9N45A

HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU

G9Z05A

HP 7.3kVA 230 Volt IEC309 32A Input (12xC13) INTL Monitored PDU

G9Z06A

HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU

D9N47A

HP 7.3kVA 230 Volt IEC309 32A Input (20xC13/4xC19) INTL Monitored PDU

D9N48A

HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU

D9N51A

HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored PDU

D9N52A

HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP Monitored PDU

D9N53A

HP 11kVA 400 Volt IEC309 16A 3-Phase Input (18xC13/3xC19) INTL Monitored PDU

D9N55A

HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU

D9N49A

HP 7.3kVA 230 Volt IEC309 32A Input (32xC13/4xC19) INTL Monitored PDU

D9N50A

HP 11kVA 400 Volt IEC309 16A 3-Phase Input (30xC13/3xC19) INTL Monitored PDU

D9N57A

HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU

D9N58A

HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU

D9N61A

HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU

D9N62A

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 24

HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU

D9N54A

HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU

D9N59A

HP 17.3kVA 208 Volt IEC309 60A 3-Phase Watertight Input (12xC13/12xC19) NA/JP Monitored PDU

G9Z07A

HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU

D9N63A

HP 22kVA 400 Volt IEC309 32A 3-Phase Input (30xC13/3xC19) INTL Monitored PDU

D9N56A

HP 22kVA 400 Volt IEC309 32A 3-Phase Input (12xC13/12xC19) INTL Monitored PDU

D9N60A

HP 22kVA 400 Volt IEC309 32A 3-Phase Watertight Input (12xC13/12xC19) INTL Monitored PDU

G9Z08A

HP Environmental Sensor for Remote Monitored PDUs

E2D53A

NOTE: Please see the HP Monitored Power Distribution Units QuickSpecs for information on additional options and product specifications.

HP Intelligent Power Distribution Units (iPDU)

HP 4.9kVA 24A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit

AF520A

HP 8.3kVA 40A Single Phase NA/JP Core Intelligent Modular Power Distribution Unit

AF521A

HP 8.6kVA 24A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit

AF522A

HP 17.3kVA 48A Three Phase NA/JP Core Intelligent Modular Power Distribution Unit

AF523A

HP 11.4kVA 16A 415V Three Phase L22-20 NA Core Intelligent Power Distribution Unit

AF900A

HP 17.3kVA 24A 415V Three Phase IEC309 NA Core Intelligent Power Distribution Unit

AF901A

HP 7.3kVA 32A Single Phase INTL Core Intelligent Modular Power Distribution Unit

AF525A

HP 11kVA 16A Three Phase INTL Core Intelligent Modular Power Distribution Unit

AF526A

HP 22kVA 32A Three Phase INTL Core Intelligent Modular Power Distribution Unit

AF527A

HP 17.3kVA 48A 208V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit

AF535A

HP 17.3kVA 24A 415V Three Phase 12 Outlet Core NA/JP Intelligent Power Distribution Unit

AF537A

HP 22kVA 32A 400V Three Phase 12 Outlet Core INTL Intelligent Power Distribution Unit

AF538A

HP 4.9kVA 24A Single Phase NA/JP Intelligent Modular Power Distribution Kit

AF531A

HP 8.6kVA 24A Three Phase NA/JP Intelligent Modular Power Distribution Kit

AF532A

HP 14.4kVA 40A Three Phase NA/JP Intelligent Modular Power Distribution Unit

AF533A

HP 7.3kVA 32A Single Phase INTL Intelligent Modular Power Distribution Kit

AF534A

HP 5xC13 Intelligent PDU Extension Bar G2 Kit

AF547A

HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar

AF528A

NOTE: Please see the HP Intelligent Power Distribution Units QuickSpecs for information on additional options and product specifications.

HP Managed Power Distribution Units (maPDU)

HP 2.8kVA 120 Volt L5-30 Input (24x NEMA 5-20) NA/JP Managed PDU

H8B48A

HP 3.6kVA 200-240 Volt Detachable C20 Input (7xC13/1xC19) WW Managed PDU

H8B49A

HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Managed PDU

H8B50A

HP 7.3kVA 200-240 Volt IEC309 32A Input (20xC13/4xC19) INTL Managed PDU

H8B51A

HP 8.6kVA 208 Volt L15-30 3 Phase Input (18xC13/6xC19) NA/JP Managed PDU

H8B52A

HP 8.6kVA 208 Volt L21-30 3 Phase Input (20xC13/3xC19/1x NEMA 5-20) NA/JP Managed PDU

H8B53A

HP 11kVA 400 Volt IEC309 16A 3 Phase Input (21xC13/3xC19) INTL Managed PDU

H8B54A

HP 14.4kVA 208V CS8365C 3 Phase Input (12xC13/12xC19) NA/JP Managed PDU

H8B55A

HP 17.3kVA 208V IEC309 60A 3 Phase Input (12xC13/12xC19) NA/JP Managed PDU

H8B56A

NOTE: Please see the QuickSpecs for Technical Specifications and additional information:

http://www8.hp.com/h20195/v2/GetHtml.aspx?docname=c04376673

(Worldwide)

NOTE: To learn more, please visit the HP Uninterruptible Power Systems (UPS) web page.

HP Rack Mount Consoles, KVM

HP Rack Mount Consoles

HP TFT7600 G2 KVM Console Rackmount Keyboard US Monitor

AZ870A

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 25

Switches, and Keyboards

HP TFT7600 G2 KVM Console Rackmount Keyboard UK Monitor

AZ871A

HP TFT7600 G2 KVM Console Rackmount Keyboard DE Monitor

AZ872A

HP TFT7600 G2 KVM Console Rackmount Keyboard FR Monitor

AZ873A

HP TFT7600 G2 KVM Console Rackmount Keyboard IT Monitor

AZ874A

HP TFT7600 G2 KVM Console Rackmount Keyboard ES Monitor

AZ875A

HP TFT7600 G2 KVM Console Rackmount Keyboard DK Monitor

AZ876A

HP TFT7600 G2 KVM Console Rackmount Keyboard NO Monitor

AZ877A

HP TFT7600 G2 KVM Console Rackmount Keyboard SE/FI Monitor

AZ878A

HP TFT7600 G2 KVM Console Rackmount Keyboard CH Monitor

AZ879A

HP TFT7600 G2 KVM Console Rackmount Keyboard PT Monitor

AZ880A

HP TFT7600 G2 KVM Console Rackmount Keyboard BE Monitor

AZ881A

HP TFT7600 G2 KVM Console Rackmount Keyboard JP Monitor

AZ882A

HP TFT7600 G2 KVM Console Rackmount Keyboard RU Monitor

AZ883A

HP TFT7600 G2 KVM Console Rackmount Keyboard Intl Monitor

AZ884A

HP TFT7600 G2 KVM Console Rackmount Keyboard US TAA Monitor

NOTE: Please see the HP Rack Console QuickSpecs for information on additional options and product specifications.

AZ885A

HP KVM Switches

HP Server Console 0x2x8 Port Analog Switch

AF616A

HP Server Console 0x2x16 Port Analog Switch

AF617A

HP TAA 0x2x16xKVM Server Console G2 Switch

AF626A

HP KVM Console USB Interface Adapter

AF628A

HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software

AF618A

HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software

AF619A

HP KVM Console USB 2.0 Virtual Media CAC Interface Adapter

AF629A

HP 1x4 USB/PS2 KVM Console Switch

AF611A

HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software

AF620A

HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software

AF621A

HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software

NOTE: To learn more, please visit the HP KVM Switches web page.

AF622A

HP USB Keyboard and Mouse

HP USB BFR with PVC Free US Keyboard/Mouse Kit

631341-B21

HP USB BFR with PVC Free Intl Keyboard/Mouse Kit

672097-B33

HP USB BFR with PVC Free UK Keyboard/Mouse Kit

631344-B21

HP USB BFR with PVC Free FR Keyboard/Mouse Kit

631346-B21

HP USB BFR with PVC Free ES Keyboard/Mouse Kit

631348-B21

HP USB BFR with PVC Free DE Keyboard/Mouse Kit

631358-B21

HP USB BFR with PVC Free JP Keyboard/Mouse Kit

631360-B21

HP USB BFR with PVC Free IT Keyboard/Mouse Kit

631362-B21

HP USB BFR with PVC Free CN Keyboard/Mouse Kit

631364-B21

HP USB BFR with PVC Free AE Keyboard/Mouse Kit

638212-B21

HP USB BFR with PVC Free RU Keyboard/Mouse Kit

638214-B21

HP USB BFR with PVC Free SE Keyboard/Mouse Kit

672097-103

HP USB BFR with PVC Free CH Keyboard/Mouse Kit

672097-113

HP USB BFR with PVC Free PT Keyboard/Mouse Kit

672097-133

HP USB BFR with PVC Free TR Keyboard/Mouse Kit

672097-143

HP USB BFR with PVC Free CZ Keyboard/Mouse Kit

672097-223

HP USB BFR with PVC Free FI Keyboard/Mouse Kit

672097-353

HP USB BFR with PVC Free AP-Intl Keyboard/Mouse Kit

672097-373

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Additional Options

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 26

HP USB BFR with PVC Free IN Keyboard/Mouse Kit

672097-D63

HP USB BFR with PVC Free KR Keyboard/Mouse Kit

NOTE: Please see the HP USB Keyboard and Mouse QuickSpecs for information on additional options and product specifications.

672097-KD3

HP Uninterruptible Power Systems (UPS)

HP Rack-mountable UPS

HP R1500 G3 Uninterruptible Power Supply (UPS)

HP R1.5kVA G3 1U INTL Uninterruptible Power System

AF471A

HP R1.5kVA G3 1U JP/TW Uninterruptible Power System

AF470A

HP R1.5kVA G3 1U NA Uninterruptible Power System

AF469A

HP R/T3000 Uninterruptible Power System (UPS)

HP R/T3000 G2 2U L530 Low Voltage NA/JP Uninterruptible Power System

AF466A

HP R/T3000 G2 2U L620 High Voltage NA/JP Uninterruptible Power System

AF467A

HP R/T3000 G2 2U Detachable Cord High Voltage INTL Uninterruptible Power System

AF468A

R5000 Uninterruptible Power System (UPS)

HP R5KVA 3U IEC309-32A High Voltage INTL Uninterruptible Power System

AF461A

HP R5KVA 3U L630 High Voltage NA/JP Uninterruptible Power System

AF460A

R7000 Uninterruptible Power System (UPS)

HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System

AF463A

HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System

AF462A

HP T750 G2 UPS Models

HP T750 G2 750VA NA Tower Uninterruptible Power System

AF446A

HP T750 G2 750VA INTL Tower Uninterruptible Power System

AF447A

HP T750J JP Uninterruptible Power System

AF456A

HP T1000 G3 UPS Models

HP T1000 G3 1000VA INTL Tower Uninterruptible Power System

AF449A

HP T1500 G3 UPS Models

HP T1500 G3 1400VA NA Tower Uninterruptible Power System

AF450A

HP T1500 G3 1400VA INTL Tower Uninterruptible Power System

AF451A

NOTE: To learn more, please visit the HP Uninterruptible Power Systems (UPS) web page.

HP USB and SD Options

HP Enterprise Mainstream Flash Media Kits for Memory Cards

HP 8GB microSD Enterprise Mainstream Flash Media Kit

726116-B21

HP Care Pack Services

Installation & Start-up Services

HP Install ProLiant ML350e Service

U6D41E

HP Startup ProLiant ML350e Service

U6D43E

Foundation Care

HP 3y 24x7 ML150 Gen9 FC Service

U7WR1E

HP 3y 24x7 w/DMR ML150 Gen9 FC Service

U7WR2E

HP 3y 24x7 w/CDMR ML150 Gen9 FC Service

U7WR3E

Proactive Care

HP 3y 24x7 ML150 Gen9 PC Service

U7WT8E

HP 3y 24x7 w/DMR ML150 Gen9 PC SVC

U7WT9E

HP 3y 24x7 w/CDMR ML150 Gen9 PC SVC

U7WU0E

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Memory

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 27

Memory Subsystem Architecture

Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per installed processor with two DIMMs per channel for a total of eight (8) DIMMs or a grand total of sixteen (16) DIMMs for the server.

Memory Population guidelines

General Memory Population Rules and Guidelines:

Install DIMMs only if the corresponding processor is installed.

If only one processor is installed in a two processor system, only half of the DIMM slots are available.

To maximize performance, it is recommended to balance the total memory capacity between all installed processors and load the channels similarly whenever possible.

When two processors are installed, balance the DIMMs across the two processors.

White DIMM slots denote the first slot to be populated in a channel.

Place the DIMMs with the highest number of ranks in the white slot when mixing DIMMs of different ranks on the same channel.

Do not mix RDIMMs or LRDIMMs.

Quad rank RDIMMs are not supported in HP ProLiant ML350 Gen9 servers.

Quad rank LRDIMMs are capable of up to three DIMMs per channel.

RDIMMs operating at 1.2V.

DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.

The maximum memory speed is a function of the memory type, memory configuration, and processor model.

The maximum memory capacity is a function of the memory type and number of installed processors.

To realize the performance memory capabilities listed in this document, HP SmartMemory is required.

There are four (4) channels per processor; eight (8) channels per server. There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots. Memory channels1 and 3 consists of the three (3) DIMMs that are furthest from the processor. Memory channel 2 and 4 consists of the three (3) DIMMs that are closest to the processor.

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Memory

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 28

Intel Gen9 Supported Memory Bandwidth for HP ProLiant Gen9 Intel® Xeon®E5-2600v3 Series Processor Family

Memory Bandwidth and Capacity

[DIMM Type]

Registered Dimms (RDIMMs)

Load Reduced (LRDIMMs)

DIMM Rank

Single Rank

Dual Rank

Dual Rack

DIMM Capacity

4GB

8GB

16GB

Voltage

Std Voltage 1.2V

SLOTS THAT CAN BE POPULATED

16 slot servers

MAXIMUM CAPACITY (GB)

128

256

1 DIMM Per Channel

2133

2 DIMM Per Channel

2133

DIMM slot and configuration diagram

DIMM slot and configuration diagrams

• Population order; start with "A" first, "B" second, "C" third, etc.

• When one processor is installed, install DIMMs in sequential alphabetic order: A, B, C, D, E, F …

• When two processors are installed, install DIMMs in sequential

• alphabetic order: CPU1-A, CPU2-A,CPU1-B,CPU2-B,CPU1-C, CP2-C

CPU 1

CPU 2

Slot #

population order

Slot #

population order

Chnl 3 1 C 1

2 G 2

Chnl 1

CPU 1

CPU 2

Slot #

population order

Slot #

population order

Chnl 4 3 D 3

4 H 4

Chnl 2

CPU 1

CPU 2

Slot #

population order

Slot #

population order

Chnl 2 5 F 5 H 6 B 6

Chnl 4

CPU 1

CPU 2

Slot #

population order

Slot #

population order

Chnl 1 7 E 7 G 8 A 8

Chnl 3

Memory Speed by Processor Model

Processor Models

Supported Memory Speeds

E5-2603v3, E5-2609v3,

1600MHz

E5-2620v3, E5-2630v3, E5-2640v3,

1866MHz

E5-2650Lv3,

2133MHz

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Memory

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 29

Standard and Maximum Memory Capacity (Preconfigured Models)

Pre-Configured Models

Standard Memory

Maximum Memory Plus Optional Memory

Standard Memory Replaced with Optional Memory

E5-2603v3,

4GB (1x4GB)

244GB (15x16GB, 1x4GB)

256GB (16x16GB)

E5-2609v3,

8GB (1x8GB)

248GB (15x16GB, 1x8GB)

256GB (16x16GB)

E5-2620v3,

16GB (1x16GB)

256GB (15x16GB, 1x16GB)

256GB (16x16GB)

DDR4 memory options part number decoder

NOTE: Capacity references are rounded to the common gigabyte (GB) values.

 4GB = 4,096MB  8GB = 8,192MB  16GB = 16,384MB

1. Capacity: 4GB/8GB/16GB/32GB

2. Rank: 1R = Single-rank; 2R = Dual-rank; 4R = Quad-rank

3. Data width: x4 = 4-bit; x8 = 8-bit

4. Memory generation: DDR4

5. Maximum memory speed: 2133 MT/s

6. CAS latency: P = 15

7. DIMM type: R = RDIMM (registered); L = LRDIMM (load reduced)

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Storage

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 30

4-bay LFF non-hot-plug drive model

1-8

8 x LFF SATA/SSD Non-hot-plug Hard Drive Bays

9-10

Media Bays

NOTE: When populating 10 LFF, not ableto install Tape Drive or Optical Drive.Possible Configurations: 1) 8LFF +1 ODD+ 1 Tape Drive (Full/Half), or 2) 9LFF + 1ODD, or

3) 9LFF + 1 Tape Drive (Full/Half).

8-bay SFF hot-plug drive model

1 x 1-8

8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays

2 x 1-8

8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays

4-bay LFF hot-plug drive model

1 x 1-4

4 x LFF SATA/SSD Hot Pluggable Hard Drive Bays

2 x 1-4

4 x LFF SATA/SSD Hot Pluggable Hard Drive Bays

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Technical Specifications

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 31

System Unit

Tower Dimensions

17.03(H) x 7.87(W) x 24.41(D) in (43.26 x 20 x 62 cm)

Tower Weight

Minimum:

37.26lb (16.9kg)

Maximum:

61.73lb (28kg)

Input Requirements

(for Standard 460W PSU, see power specifications tables for detail on 460W, 750W and 1200W power supplies)

Range Line Voltage Rated Input Current

100 to 240 VAC

For 550W Power Supply:6.7 A (at 100 VAC)3.3 A (at 100 VAC)

Rated Input Frequency

47 to 63 Hz

Rated Input Power

For 550 W Power Supply:< 670 W (at 100 VAC),< 660 W (at 200 VAC),

BTU Rating

Maximum

For 550 W Power Supply:2201 BTU/hr (at 100 VAC),2153 BTU/hr (at 200 VAC)

Power Specifications

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor - Click on the system of interest. Example: ML150 Gen9Follow the instructions of the next screens.

Power Supply Output

Rated Steady-State Power

For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200 VAC),

Maximum Peak Power

For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200 VAC),

System Inlet Temperature

Standard Operating Support

10° to 35°C (50° to 95°F) at sea level with an altitude derating of

1.0°Cper every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum of 3048 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed. System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F).

Extended Ambient Operating Support

For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL: http://www.hp.com/servers/ashrae

For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft). The approved hardware configurations for this system are listed at the URL: http://www.hp.com/servers/ashrae

System performance may be reduced if operating in the extended ambient operating range or with a fan fault.

NOTE: Supports A3 extended ambient, A4 extended ambience will be available in early 2015.

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr(36°F/hr).

Relative Humidity

Operating

Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8% relative humidity. Maximum to be the lower (less moisture) of24°C (75.2°F) dew point or 90% relative humidity.

Non-operating

5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

Altitude

Operating

3048 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457m/min (1500 ft/min).

Non-operating

9144 m (30,000 ft). Maximum allowable altitude change rate is 457m/min (1500 ft/min).

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Technical Specifications

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 32

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

L WAd

3.8 Bels (1P LFF Non Hot-Plug Entry)

3.8 Bels (1P LFF Hot-plug Base)

4.3 Bels (1P SFF Hot-plug Performance)

L pAm

22 dBA (1P LFF Non Hot-Plug Entry)

22 dBA (1P LFF Hot-plug Base)

25 dBA (1P SFF Hot-plug Performance)

Operating

L WAd

3.8 Bels (1P LFF Non Hot-Plug Entry)

3.8 Bels (1P LFF Hot-plug Base)

4.1 Bels (1P SFF Hot-plug Performance)

L pAm

23 dBA (1P LFF Non Hot-Plug Entry)

22 dBA (1P LFF Hot-plug Base)

25 dBA (1P SFF Hot-plug Performance)

NOTE: Configurations tested for 1P LFF Entry models included two (2) 500GB LFF SATA Midline HDD and Windows 2012 Enterprise 64-bit. NOTE: Configurations tested for 1P and 2P SFF models included two (2) 500GB SFF SATA Midline HDD and Windows 2012 Enterprise 64-bit. NOTE: The Listed sound levels apply to standard shipping configurations. Additional options may result in increased sound levels.

Emissions Classification

FCC Rating

Class A

Normative Standards

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

HP Dynamic Smart Array B140i Controller

Number of PCI links

Four

PCI link rate

4 Gb/s

Storage protocol support

SATA

SAS/SATA peak data tranfer rate

6 Gb/s

Number of SAS/SATA links

10 links

SAS/SATA connectivity

2x4 connectors; 2x1 connectors Expander support

Drives supported (max)

Up to 10 Internal Drives RAID support

0, 1, 10, 5 SATA

Software management

HP SSA, SMH, SIM Warranty

Server warranty

HP Secure Encryption license

Not Supported

HP SmartCache License

Not Supported

HP Smart Storage Administrator

Supported

QuickSpecs

HP ProLiant ML150 Generation9 (Gen9)

Technical Specifications

c04447843 – DA – 15090 Worldwide — Version 1 — December 1, 2014

Page 33

HP Ethernet 1Gb 4port 331i Adapter

Network Interface

10Base-T/100Base-TX/1000Base-TX

Compatibility

IEEE 802.3 10Base-T

IEEE 802.3ab 1000Base-T

IEEE 802.3u 100Base-TX

Data Transfer Method

PCI Express, two lanes (x2) Controller

BCM5717

Network Transfer Rate

10Base-T (HalfDuplex)

10 Mb/s per port, 40 Mb/s combined

10Base-T (FullDuplex)

20 Mb/s per port, 80 Mb/s combined

100Base-TX (HalfDuplex)

100 Mb/s per port, 400 Mb/s combined

100Base-TX (FullDuplex)

200 Mb/s per port, 800 Mb/s combined

100Base-TX (HalfDuplex)

1000Mb/s per port, 4000 Mb/s combined

100Base-TX (FullDuplex)

2000Mb/s per port, 8000 Mb/s combined Connector

RJ-45

Cable Support

10 Base-T

Categories 3, 4 or 5 UTP; up to 328 ft (100 m)

10/100/1000 Base-TX

Category 5 or higher UTP; up to 328 ft (100 m)

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to:

http://www.hp.com/go/green. To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office. Products returned to

HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at:

http://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE

treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Intel® and Xeon® are registered trademarks of Intel Corporation in the U.S. and other countries.

Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of companies.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less

HPE ML150 Gen9 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

Standard Features

Optional Features

Service and Support

Pre-configured Models

Configuration Information - Factory Integrated Models

Core Options

Additional Options

Memory

Storage

Technical Specifications