HPE K2Q90A Getting Started Guide

QuickSpecs
HPE MSA 1040 Storage

Overview

Page 1
HPE MSA 1040 Storage
The HPE MSA 1040 Storage is designed for entry-level market needs, features 8Gb Fibre Channel, 12 Gb SAS, and 1GbE and 10GbE iSCSI at previously unattainable entry price points. The array allows users to take advantage of the lates technologies in simple and efficient ways by providing a good balance between performance and budget resulting in a highly favorable $/GB return on their investment.
Entry consolidation and virtualization initiatives are now well in your budgeta features but at more affordable entry price point. ProLiant and BladeSystems administrators as well as IT generalists will fi storage management tasks simple and intuitive with MSA.
The MSA 1040 arrays leve and 2GB of system memory technology which best meets your appl standard with intuitive management tools and powerful data services such as Snapshots and Volume Copy for increased data protection.
sing strategy with one optional software suite. The Advanced Data Services
Suite include the following software licenses:
- HPE MSA Remote Snap Software LTU
HPE MSA 1040 Storage (SFF)
HPE MSA 1040 Storage (LFF)
rage a new 4th-generation MSA architecture with a new processor, 2-host ports and 4GB data cache
per controller. Take advantage of the latest hard drive advances by choosing the form factor and
ication and budget requirements. Unlike many competing arrays, the MSA 1040 ships
The MSA1040 now offers a simplified licen
- HPE MSA 2042 Performance Automated Tiering LTU
- HPE MSA 512-Snapshot Software LTU
t storage
ry reach. The MSA 1040 offers many of MSA 2040
nd
QuickSpecs
HPE MSA 1040 Storage
Overview
Page 2
MSA 1040, shown with 2 controllers installed
1.
Power supply 1
2.
Controller Module A
3.
5.
7.
9.
Controller Module B CLI Port (mini USB) Cache Status LED Power Supply
4.
6. .
CLI Port (mini USB) Network Management Port SAS Expansion Port
8
QuickSpecs
HPE MSA 1040 Storage

Models

Page 3
HPE MSA 1040 Storage
MSA 1040 Pre-Configured Models
HP MSA 1040 2-port Fibre Channel Dual Controller LFF Storage
1
E7V99A
HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage
2
E7W00A
HP MSA 1040 2-port SAS Dual Controller LFF Storage
3
K2Q90A
HP MSA 1040 2-port SAS Dual Controller SFF Storage
4
K2Q89A
HP MSA 1040 2-port 1G iSCSI Dual Controller LFF Storage
5
E7W01A
HP MSA 1040 2-port 1G iSCSI Dual Controller SFF Storage
6
E7W02A
HP MSA 1040 2-port 10G iSCSI Dual Controller LFF Storage
7
E7W03A
HP MSA 1040 2-port 10G iSCSI Dual Controller SFF Storage8
E7W04A
NOTE:
Smart Buys
Smart Buys are pre-discounted SKU’s available in participating North and South American countries. Please check with your local authorized partner for availability.
Smart Buy Drive Kits
HP MSA 300GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive
J9F44SB
HP MSA 600GB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive
J9F46SB
HP MSA 1.2TB 12G SAS 10K SFF(2.5in) Dual Port Enterprise 3yr Warranty Hard Drive
J9F48SB
HP MSA 1.8TB 12G SAS 10K SFF (2.5in) 512e Enterprise 3yr Warranty Hard Drive
J9F49SB
HP MSA 200GB 12G ME SAS SFF (2.5in) Enterprise Mainstream 3yr Warranty Solid State Drive
K2Q45SB
Smart Buy MSA 1040 Storage System
HP MSA 1040 2-port Fibre Channel Dual Controller LFF Storage/S-Buy
E7V99SB
HP MSA 1040 2-port Fibre Channel Dual Controller SFF Storage/S-Buy
E7W00SB
HP MSA 1040 2-port 1G iSCSI Dual Controller LFF Storage/S-Buy
E7W01SB
HP MSA 1040 2-port 1G iSCSI Dual Controller SFF Storage/S-Buy
E7W02SB
HP MSA 1040 2-port 10G iSCSI Dual Controller LFF Storage/S-Buy
E7W03SB
HP MSA 1040 2-port 10G iSCSI Dual Controller SFF Storage/S-Buy
E7W04SB
HP MSA 1040 1Gb iSCSI w/12 300GB SAS 10K SFF (2.5in) Hard Drive Bundle/S-Buy
K2Q05SB
HP MSA 1040 1Gb iSCSI w/12 900GB SAS 10K SFF (2.5in) Hard Drive Bundle/S-Buy
K2Q06SB
Models
1
Includes LFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed,
drives not included.
2
Includes SFF Array Chassis + two MSA 1040 FC 2-port controllers, SFPs installed,
drives not included.
3
Includes LFF Array Chassis + two MSA 1040 SAS 2-port controllers, drives not
included.
4
Includes SFF Array Chassis + two MSA 1040 SAS 2-port controllers, drives not
included.
5
Includes LFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed,
drives not included.
6
Includes SFF Array Chassis + two MSA 1040 1GbE 2-port controllers, SFPs installed,
drives not included.
7
Includes LFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed, drives not included, direct attached copper cables are supported in 10GbE Controller systems.
8
Includes SFF Array Chassis + two MSA 1040 10GbE 2-port controllers, SFPs installed, drives not included, direct attached copper cables are supported in 10GbE Controller systems.
QuickSpecs
HPE MSA 1040 Storage
Models
Page 4
HP MSA 1040 10Gb iSCSI w/12 300GB SAS 10K SFF (2.5in) Hard Drive Bundle/S-Buy
K2Q07SB
HP MSA 1040 10Gb iSCSI w/12 900GB SAS 10K SFF (2.5in) Hard Drive Bundle/S-Buy
K2Q08SB
Smart Buy Disk Enclosures
HP D2700 Disk Enclosure/S-Buy
AJ941SB
QuickSpecs
HPE MSA 1040 Storage

Features

Page 5
All MSA 1040 models offer a common set of valuable features:
Ease of management featuring browser-based out-of-band access. This allows a department or small company to
effectively handle growing storage requirements, with the aid of an intuitive GUI to administer the unit with a minimum of
Thin Provisioning allows storage allocation of physical storage resources only when they are consumed by an application.
When capacity is added to a system, the user
Storage Pools are available
your P2000 G3 systems http://www.hpe.com/h20195/v2/GetDocument.aspx?docname=4AA4-6830ENW
complexity. Ideal for local or remote installations.
Storage Management Utility V3 (SMU). This new MSA management GUI brings a new modern look and feel to array
management. SMU V3 is available with GL200 firmware or newer. Existing MSA customers can choose to use the new SMU (V3) or to continue to use the previous generation SMU (V2) if new virtualization features are not required.
Thin Provisioning also allows over-provisioning of physical storage pool resources allowing ease of growth for volumes without predicting storage capacity upfront. Thin Provisioning is available with GL200 firmware or newer.
MSA 1040 comes standard with 64 controller-based snapshots and clone capability (volume copy is only available on
linear storage with pre-GL220 firmware; volume copy for both linear and virtual storage is available with GL220 firmware or newer). There is also an optional license for 512 snapshots.
Dual controller array models with automated failover for high availability.
All models support a wide variety of drives: High-performance enterprise-class SAS, and high-capacity SAS Midline drives.
The MSA 1040 will support a maximum of 3 disk enclosures (either LFF and/or SFF); Add-on enclosures can either be
D2700 Small Form Factor (SFF) Drive Enclosures or MSA 2040 Large Form Factor (LFF) Disk Enclosures. The array can grow incrementally from a few drives to 48 LFF or 99 SFF drives.
Disk Groups support RAID levels 1, 5, 6, 10. Linear Vdisks support RAID levels 0,1, 3, 5, 6, 10, 50.
Maximum hard drive counts vary by RAID levels: 2 drive max for RAID level 1; max of 16 drives for RAID levels 0, 3, 5, 6,
and 10; max of 32 drives for RAID level 50. With GL200 or newer firmware and the purchases virtualization license multiple Disk Groups can be aggregated into a Storage Pool.
The maximum LUN size is 140TB (128TiB)
Storage Pools allow data on a given LUN to span across all drives in a pool.
is also getting a performance benefit of the additional spindles – hence the term Wide Striping. with GL200 firmware or newer and the advanced Virtualization license needs to be purchased separately.
Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified
resource management. These enhancements are offered with GL200 or newer firmware and with the purchase of advanced Virtualization license.
Snapshot enhancements for virtual storage, including performance improvements, hierarchical snapshots, and simplified
resource management. Administrators can monitor and optionally control snapshot space usage with GL220 firmware or later.
Scheduler to schedule virtual storage snapshots for replication with GL220 firmware or later.
SSD support is available with GL220 firmware or newer. With SSD support customers can enable advanced virtualization
features such as read cache and automated tiering (requires Advanced Virtualization Upgrade License). SSD performance tier requires additional Performance Auto Tiering License.
Virtual tier affinity allows customers to prioritize data by assigning appropriate affinity level (Performance, No Affinity &
Archive) with GL220 firmware or later.
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software) Upgradable by design. Owners of a P2000 G3 array are able to do data-in-place upgrades to the new MSA 1040 array.
This unique ability protects the earlier investments in drives, and JBODs.
NOTE: Certain limitations are applicable- please review MSA 1040-2040 Upgrade Technical Whitepaper before upgrading
QuickSpecs
HPE MSA 1040 Storage
Features
Page 6
Application Solutions
The HPE MSA 1040 Storage is the ideal solution for customers running Oracle, Microsoft, SAP
disaster recovery solutions;
Learn more
To learn more about specific HPE Storage Solutions that are built with Oracle, Microsoft, SAP and
HPE Storage for VMware hyperlink to: http://www.hp.com/go/vmware/storage
environments and those customers who are deploying virtual server technologies like VMware, Hyper­V. The MSA 1040 delivers enterprise functionality that enhances virtual environments, simplifies management, and reduces costs. Easy to deploy, scale and maintain, HPE MSA 1040 Arrays ensure that crucial business data remains available.
Hewlett Packard Enterprise has developed best-in-class expertise in Oracle, Microsoft, SAP, and Virtualization Hypervisor technology through extensive testing with the HPE MSA 1040, Hewlett Packard Enterprise servers, and management software; high availability and and backup and recovery on the Oracle, Microsoft, and SAP application platforms. As a result, our customers can expect a wide range of operational and business benefits where they can:
Deploy IT assets across multiple locations.
Incrementally grow storage without interruption.
Enable high availability and disaster recovery capabilities for critical applications.
Deploy a remote disaster recovery site.
Virtualization environments in mind, visit the solution sites supporting each of these applications. HPE MSA Storage hyperlink to: http://www.hp.com/go/MSA HPE Storage for Oracle hyperlink to: http://www.hp.com/storage/oracle HPE Storage for Microsoft hyperlink to: http://www.hp.com/storage/microsoft HPE Storage for SAP hyperlink to: http://www.hp.com/storage/sap
QuickSpecs
HPE MSA 1040 Storage

Family Information

Page 7
MSA 1040
Capacity
Single Enclosure and Maximum Additional Drive Enclosures
LFF:
Pool Capacity
GL200: 169 TB (154 TiB)
Therefore each MSA storage system can have double the usable capacity listed above
Cache
6 GB per controller
2GB
Total LUNs ( of architecture: Linear vs. Virtualized)
512
Host Interconnect
2 x 8Gb Fibre Channel ports per controller
2x 12Gb SAS ports per controller
Maximum Drives w/ 3 expansion
48 LFF/99 SFF
Maximum Host Supported
64 in v2 UI
Standard Software
Snapshots (64)
Optional Software
Remote Snap (linear storage only)
Max Snapshot (512)
Product Technology
MSA 1040 Models
MSA 1040 Storage offers 4 factory configured models:
Modular Chassis
2U rack height. 12 Large Form Factor or 24 Small Form Factor drive bays, accommodating SAS and SAS MDL Drives
Optional Disk Enclosures
Just as the user has a choice of chassis for the array head (LFF and SFF drive bays), so also do they
SFF disk enclosures can be hot-added to an operating array. SFF and LFF Array heads and Disk
LUN size are dependent
the storage
144 TB (single LFF array-head -using 12 x 12TB LFF SAS MDL drives)
576 TB (by adding 3 LFF Disk Enclosures behind LFF Array & using 12 TB LFF SAS MDL drives)
SFF:
76.8 TB (single SFF array-head - using 24 x 3.2TB SFF SSD drives)
307.2 TB (by adding 3 SFF Disk Enclosures behind SFF Array & using 3.2TB SFF SSD drives)
NOTE: 1) maximum available storage capacity depends on the RAID level being implemented
GL210: 219 TB (200 TiB) GL220: 329 TB (300 TiB)
GL220 with Large Pool Support: 562 TB (512 TiB)
NOTE: 1) The above pool capacities by firmware release apply to virtual storage only
2) The above capacities are usable capacity/pool. Each MSA system can support two pools.
NOTE: 6GB cache includes Data (Read/Write) cache = 4GB and Metadata and System OS cache =
maximum LUN size: 140TB (128TiB)
Thin Provisioning allows you to create the LUNs independent of the physical storage
2 x 1GbE RJ-45 ports per controller
2 x 10GbE ports per controller
512 in v3 UI
MSA 1040 8Gb FC with 2-ports per controller MSA 1040 12Gb SAS with 2-ports per controller MSA 1040 1GbE iSCSI with 2-ports per controller MSA 1040 10GbE iSCSI with 2-ports per controller
have a choice of expansion disk enclosures accommodating either drive size. The MSA LFF and the
QuickSpecs
HPE MSA 1040 Storage
Family Information
Page 8
Enclosures can be mixed without limitations.
The MSA 2050 SFF and LFF disk enclosures are the recommended enclosures to be used for capacity expansion on the MSA 2040 storage system.
LFF Disk Enclosures
array expansion port or existing disk enclosure cascade port.
SFF Disk Enclosures
cables for connection to the MSA 1040 array expansion port or existing disk enclosure
The MSA 1040 storage systems have supported various SFF and LFF disk enclosures over time. The latest disk enclosures to be supported on the MSA 1040 platform are the MSA 2050 SFF Disk Enclosure and the MSA 2050 LFF Disk Enclosures. The MSA 2050 SFF and LFF enclosures can be added to existing MSA 1040 storage systems for expansion disk capacity. The MSA 2050 SFF and LFF disk enclosures can be intermixed with the D2700 SFF disk enclosure and/or the MSA 2040 LFF disk enclosure when connected to the MSA 1050 base system.
MSA 2040 LFF Disk Enclosure. This 2U unit has twelve LFF (3.5-inch) drive bays and accepts for MSA dual-ported SAS, SEDs and SAS MDL drives. The pre-configured HPE MSA 2040 LFF Drive Enclosure (M0S96A) has two I/O modules and supports both single and dual controller arrays.
This 3.5-inch MSA disk enclosure can be attached to MSA 1040 LFF or SFF array head.
Each configured model ships standard with two .5m mini-SAS to mini-SAS cables for
connection to the MSA 1040 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 3 total Disk Enclosures
MSA 2050 LFF Disk Enclosure. This 2U enclosure is designed to support twelve HPE Storage LFF drives and accepts MSA dual-ported 12Gb SSD and SAS Midline hard drives. The pre-configured MSA 2050 LFF Disk Enclosure (Q1J06A) has two I/O modules and supports the MSA 1040 dual controller arrays.
The MSA 2050 LFF Disk Enclosure can be attached to the MSA 1040 LFF or SFF storage
models.
Each MSA 2050 LFF Disk Enclosure ships standard with two .5m mini-SAS to mini-SAS cables
for connection to the MSA 1040
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 3 total Disk Enclosures
on the MSA 1040 storage models.
Requires GL225 array controller firmware or newer
The MSA 2050 LFF Disk Enclosures are the recommended LFF enclosures to be used for
capacity expansion on the MSA 2040 storage system.
inch Universal form factor (SFF) 12Gb, SSD, SAS, SEDs or SAS MDL hard drives. It ships standard with dual I/O modules installed.
HP D2700 Disk Enclosure (AJ941A) is designed to support twenty five HPE Storage or ProLiant 2.5-
This 2.5-inch D2700 disk enclosure can be attached to MSA 2040 LFF or SFF array head
The D2700 enclosure ships with a two .5m mini-SAS to mini-SAS cables for connection to the
MSA 2040 array expansion port or existing disk enclosure cascade port.
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 7 total Disk Enclosures.
The MSA 2040 does not support SFF SATA HDDs.
HPE MSA 2050 SFF Disk Enclosure (Q1J07A) This 2U enclosure is designed to support twenty four HPE Storage 2.5-inch SFF drive bays and accepts MSA dual ported 12Gb SSD, Enterprise SAS, or SAS Midline hard drives. The pre-configured MSA 2050 SFF Disk Enclosure has two I/O modules and supports the MSA 1040 dual controller arrays.
The MSA 2050 SFF Disk Enclosure can be attached to the MSA 1040 LFF or SFF storage
models
Each MSA 2050 SFF Disk Enclosure ships standard with a two .5m mini-SAS to mini-SAS
QuickSpecs
HPE MSA 1040 Storage
Family Information
Page 9
cascade port.
capacity expansion on the MSA 1040 storage system
Scalability
The MSA 1040 Arrays are designed to allow an installation to begin with smaller capacity and be able
Vdisks
The Vdisk nomenclature is being replaced by Disk Group. In the Linear Storage and in the SMU V2
LUNs
The MSA 1040 arrays support 512 volumes and up to 512 snapshots in a system. All of these
Groups. LUNs are no longer be restricted to a single Vdisk as with Linear Storage. A volume’s data on a
B and
RAID 0, 1, 3, 5, 6, 10, 50
In addition to the usual RAID levels, the MSA 1040 features several important additional levels. RAID 6
through the addition of RAID 0, particularly during writes.
Performance
The preliminary performance figures provided here are for your reference as many variables exist
MSA 1040 Array
(with SSDs)
HPE MSA 1040
Controllers
HPE MSA 1040
10GbE Controller
HPE MSA 1040
HPE MSA
Controllers
Protocol (host connect)
8Gb
Fibre Channel
10GbE
iSCSI
1GbE
iSCSI
6Gb SAS
LFF and/or SFF Disk Enclosures can be mixed up to the maximum of 3 total Disk Enclosures.
Requires GL225 array controller firmware or newer
The MSA 2050 SFF Disk Enclosures are the recommended SFF enclosures to be used for
to grow gradually as needed. The flexibility of SAS or SAS MDL drives technology, form factors, sizes, speeds, and costs per GB allows a system to easily fit in almost any budget.
Large Form Factor configurations can scale up to 120 TB SAS MDL, expandable to 480 TB
SAS MDL with the addition of a maximum of three MSA 3.5 LFF-inch Disk Enclosures.
Small Form Factor configurations can scale from 43.2 TB SAS. With the addition of three
D2700 JBODs, the MSA 1040 storage can support 178.2 TB SAS.
Disk Group
Storage Pools
you will see reference to Vdisk in the Virtual Storage and the SMU V3 you will see Disk Group. Vdisk and Disk Group are essentially the same. Vdisks have additional RAID types (RAID 0, 3) available only in the CLI.
A Disk Group is a collection of disks in a given redundancy mode (RAID 1, 5, 6, 10, 50). It is
equivalent
to a Vdisk in Linear Storage and utilizes the same proven fault tolerant technology used by Linear Storage. Disk Group RAID level and size can be created based on performance and/or capacity requirements. With GL200 or newer firmware multiple Disk Groups can be allocated into a Storage Pool for use with the Virtual Storage features.
volumes can be mapped to LUNs. Maximum LUN sizes up to 140TB (128TiB), the LUNs size are dependent on the storage architecture: Linear vs. Virtualized. Thin Provisioning allows the user to create the LUNs independent of the physical storage.
The GL200 firmware or newer introduces Storage Pools – which are comprised of one or more Disk
given LUN can now span all disk drives in a pool. When capacity is added to a system, users will benefit from the performance of all spindles in that pool. Leveraging Storage Pools, the MSA 2040 supports large, flexible Volumes with sizes up to 128Ti facilitates seamless capacity expansion. As volumes are expanded data automatically reflows to balance capacity utilization on all drives.
is the highest level of RAID protection. It allocates two sets of parity data across drives and allows simultaneous write operations. It can withstand two simultaneous drive failures without downtime or data loss. RAID 10 is mirroring and striping without parity. RAID 50 combines the block striping and parity of RAID 5 with the straight block striping of RAID 0, yielding higher performance than RAID 5
between array configurations, workloads, hard drive types, vdisk setup parameters and host system setup. All Performance information is measure using Linear Storage.
Performance
1
8Gb FC
s
1GbE Controllers
1040 SAS
Loading...
+ 19 hidden pages