HPE JH390A Getting Started Guide

QuickSpecs
HPE FlexFabric 5940 Switch Series

Overview

1
HPE FlexFabric 5940 Switch Series
Models
HPE FlexFabric 5940 48SFP+ 6QSFP+ Switch
JH395A
HPE FlexFabric 5940 32QSFP+ Switch
JH396A
HPE FlexFabric 5940 48XGT 6QSFP+ Switch
JH394A
HPE FlexFabric 5940 48SFP+ 6QSFP28 Switch
JH390A
HPE FlexFabric 5940 48XGT 6QSFP28 Switch
JH391A
HPE FlexFabric 5940 2-slot Switch
JH397A
HPE FlexFabric 5940 4-slot Switch
JH398A
HPE FlexNetwork 5940 48p 10GbE SFP/SFP+ and 6p 40/100GbE QSFP28 with 2 Fans 2 PS Switch Bundle
JH684A
HPE FlexNetwork 5940 48p 10GBaseT and 6p 40/100GbE QSFP28 with 2 Fans 2 PS Switch Bundle
JH685A
HPE FlexNetwork 5940 32-port 40GbE QSFP+ with 2 Fans 2 Power Supply Switch Bundle
JH686A
HPE FlexNetwork 5940 2-slot Chassis with 2 Fans 2 Power Supply Bundle
JH691A
HPE FlexNetwork 5940 4-slot Chassis with 2 Fans 4 Power Supply Bundle
JH692A
Key features
VXLAN L2 and L3 and EVPN support for virtualized environments
Product overview
The HPE FlexFabric 5940 Switch Series is a family of high performance and low-latency 10GbE, 40GbE top-of-rack (ToR) data center switches. The switch series include also 100G uplink technology and also a 2-slot and 4-slot modular form factor providing
OpenFlow support for investment protection and SDN environments
High-density 10GbE, 40GbE with 40G or 100G uplink and modular for spine-and–leaf deployments
Unify management of virtual and physical network with VEPA and IMC
Data center convergence and resiliency with SPB, ISSU, DCB, FC/FCoE, IRF, and TRILL
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
2
ultimate flexibility for an ever-changing Data Center requirements. This entire series is part of the Hewlett Packard Enterprise FlexFabric data center solution, which is a cornerstone of the FlexNetwork architecture.
The FlexFabric data centers, or at the core layer of medium
With the increase pace of deploying virtualized applications, adopting softwar
server traffic, many data centers now require spine and ToR switch innovations that will meet their requirements. The HPE FlexFabric 5940 is optimized to meet the increasing requirements for higher traffic, the capability to handle virtual environments, and low-latency.
Features and benefits
Quality of Service (QoS)
os architecture with VOQs and large buffers with the flexibility and scalability for
Data center optimized
through and nonblocking architecture delivers low latency (~1 microsecond for 10GbE) for very demanding enterprise
monitoring, and restart; the OS also allows individual software modules to be upgraded for higher availability and supports
provides support for T11 standards-compliant FC-BB-5 Fibre Channel over Ethernet (FCoE), including FCoE initialization
5940 Switch Series is ideally suited for deployment at the aggregation or server access layer of large enterprise
Powerful QoS features
Flexible queue scheduling: including Strict Priority (SP), WRR, WDRR, WFQ, SP+WRR, SP+WDRR, SP+WFQ,
Packet filtering and remarking: Packet filtering at L2 (Layer 2) through L4 (Layer 4); flow classification based
-sized enterprises.
e-defined networking, and the server-to-
-performance server connectivity, convergence of Ethernet and storage
Configurable Buffer, Time range, Queue Shaping, CAR with 8kbps granularity.
on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, and VLAN. provides nonblocking, lossless Cl future growth
Flexible high port density
5940 switch enables customers to scale their server-edge 10/40/100 GbE ToR deployments to new heights with high­density 48 x 10 GbE ports with 6 ports of 40G, 48 x 10 GbE ports with 6 ports of 100G and 32 x 40 GbE delivered in a 1RU design; the 5940 32 ports of 40G switch can also be configured as a 72 x 10 GbE port device by using a 40G-to-10 GbE splitter cable that turns each 40 GbE port into four 10-GbE ports. The 48 ports models comes in SFP+ or BASE-T
High-performance switching
cut­applications; the switch delivers high-performance switching capacity and wire-speed packet forwarding
Higher scalability
Hewlett Packard Enterprise Intelligent Resilient Fabric (IRF) technology simplifies the architecture of server access networks; up to nine HPE 5940 switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter two-tier networks using IRF, which reduces cost and complexity
Advanced modular operating system
Comware v7 software's modular design and multiple processes bring native high stability, independent process
enhanced serviceability functions like hitless software upgrades
Reversible airflow
enhanced for data center hot-cold aisle deployment with reversible airflow—for either front-to-back or back-to-front airflow
Redundant fans and power supplies
Internal redundant and hot-pluggable power supplies and dual fan trays enhance reliability and availability
Lower OPEX and greener data center
provide reversible airflow and advanced chassis power management
Data Center Bridging (DCB) protocols
provides support for IEEE 802.1Qbb Priority Flow Control (PFC), Data Center Bridging Exchange (DCBX), IEEE 802.1Qaz Enhanced Transmission Selection (ETS), Explicit Congestion Notification (ECN) for converged FCoE, iSCSI and RoCE environments
FCoE support
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
3
protocol (FIP), FCP, Fiber Channel enhanced port types VE, TE and VF, NPV, NPIV, fabric name server, RSCN, login
performance remote backup
Manageability
cased access control (RBAC) provides
multiple levels of access; configuration rollback and multiple configurations on the flash provide ease of operation; remote
Resiliency and high
allows groups of two routers to back each other up dynamically to create highly available routed environments
Jumbo frames
VXLAN hardware support
Dynamic VXLAN configuration
EVPN
Full-featured console
Troubleshooting
Multiple configuration files
SNMP v1, v2c and v3
Out-of-band interface
Remote configuration and management
services, and name-server zoning, per-VSAN fabric services, FSPF, standard zoning and fiber channel ping
with frame sizes of up to 10,000 bytes on Gigabit Ethernet and 10-Gigabit ports, allows high­and disaster-recovery services to be enabled
VXLAN Layer 2 and Layer 3 gateway support for up to 4k tunnels
OVSDB & ML2 support for dynamic VXLAN configuration
Control plane protocol for VXLAN based on industry standards. It enables Layer-2 and Layer-3 control-plane learning of end-host reachability information, enabling organizations to scale their VXLAN infrastructure better. Integration with Openstack Neutron plugin for overlay automation/orchestration
provides complete control of the switch with a familiar CLI
Ingress and egress port monitoring: enable network problem solving
Traceroute and ping: enable testing of network connectivity
allow multiple configuration files to be stored to a flash image
facilitate centralized discovery, monitoring, and secure management of networking devices
isolates management traffic from user data plane traffic for complete isolation and total reachability, no matter what happens in the data plane
delivered through a secure command-line interface (CLI) over Telnet and SSH; role-
visibility is provided with sFlow and SNMP v1/v2/v3, and is fully supported in HPE Intelligent Management Center (IMC)
ISSU and hot patching
In Services Software Upgrade (ISSU) provides hitless software upgrades and hitless patching of the modular operating system
Autoconfiguration
provides automatic configuration via DHCP autoconfiguration
NTP, SNTP
synchronizes timekeeping among distributed time servers and clients; support for network time protocol (NTP), secure network time protocol (SNTP)
IRF technology
enables an Hewlett Packard Enterprise FlexFabric to deliver resilient, scalable, and secured data center networks for physical and virtualized environments; groups up to nine HPE 5940 switches in an IRF configuration, allowing them to be configured and managed as a single switch with a single IP address; simplifies ToR deployment and management, reducing data center deployment and operating expenses
IEEE 802.1w Rapid Convergence Spanning Tree Protocol
increases network uptime through faster recovery from failed links
IEEE 802.1s Multiple Spanning Tree
provides high link availability in multiple VLAN environments by allowing multiple spanning trees
Virtual Router Redundancy Protocol (VRRP)
availability
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
4
Hitless patch upgrades
Layer 2 switching
pport for LACP, LACP Local Forwarding First,
optimization of
Layer 3 services
es the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection
Layer 3 routing
allow quick failover of router ports
allows patches and new service features to be installed without restarting the equipment, increasing network uptime and facilitating maintenance
Ultrafast protocol convergence (< 50 ms) with standard-based failure detection—Bidirectional Forwarding
Detection (BFD) enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Device Link Detection Protocol (DLDP)
monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP­based networks
Graceful restart
allows routers to indicate to others their capability to maintain a routing table during a temporary shutdown and significantly reduces convergence times upon recovery; supports OSPF, BGP, and IS-IS
MAC-based VLAN
provides granular control and security; uses RADIUS to map a MAC address/user to specific VLANs
Address Resolution Protocol (ARP)
supports static, dynamic, and reverse ARP and ARP proxy
IEEE 802.3x Flow Control
provides intelligent congestion management via PAUSE frames
Ethernet Link Aggregation
provides IEEE 802.3ad Link Aggregation of up to 128 groups of 32 ports; su and LACP Short-time provides a fast, resilient environment that is ideal for the data center
Spanning Tree Protocol (STP)
supports STP (IEEE 802.1D), Rapid STP (RSTP, IEEE 802.1w), and Multiple STP (MSTP, IEEE 802.1s)
VLAN support
provides support for 4,096 VLANs based on port, MAC address, IPv4 subnet, protocol, and guest VLAN; supports VLAN mapping
IGMP support
provides support for IGMP Snooping, Fast-Leave, and Group-Policy; IPv6 IGMP Snooping provides Layer 2 multicast traffic
DHCP support at Layer 2
provides full DHCP Snooping support for DHCP Snooping Option 82, DHCP Relay Option 82, DHCP Snooping trust, and DHCP Snooping item backup
Address Resolution Protocol (ARP)
Dynamic Host Configuration Protocol (DHCP)
Operations, administration and maintenance (OAM) support
Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
determin of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets
provides support for Connectivity Fault Management (IEEE 802.1AG) and Ethernet in the First Mile (IEEE 802.3AH); provides additional monitoring that can be used for fast fault detection and recovery
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
5
Policy-based routing
IS routing and extended
Additional in
Management
File copy: allows users to copy switch files to and from a USB flash drive
makes routing decisions based on policies set by the network administrator
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, BGP, and IS-IS
Open shortest path first (OSPF)
delivers faster convergence; uses this link-state routing Interior Gateway Protocol (IGP), which supports ECMP, NSSA, and MD5 authentication for increased security and graceful restart for faster failure recovery
Border Gateway Protocol 4 (BGP-4)
delivers an implementation of the Exterior Gateway Protocol (EGP) utilizing path vectors; uses TCP for enhanced reliability for the route discovery process; reduces bandwidth consumption by advertising only incremental updates; supports extensive policies for increased flexibility; scales to very large networks
Intermediate system to intermediate system (IS-IS)
uses a path vector Interior Gateway Protocol (IGP), which is defined by the ISO organization for IS­by IETF RFC 1195 to operate in both TCP/IP and the OSI reference model (Integrated IS-IS)
Static IPv6 routing
provides simple manually configured IPv6 routing
Dual IP stack
maintains separate stacks for IPv4 and IPv6 to ease the transition from an IPv4-only network to an IPv6-only network design
Routing Information Protocol next generation (RIPng)
extends RIPv2 to support IPv6 addressing
OSPFv3
provides OSPF support for IPv6
BGP+
extends BGP-4 to support Multiprotocol BGP (MBGP), including support for IPv6 addressing
IS-IS for IPv6
extends IS-IS to support IPv6 addressing
IPv6 tunneling
allows IPv6 packets to traverse IPv4-only networks by encapsulating the IPv6 packet into a standard IPv4 packet; supports manually configured, 6to4, and Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnels; is an important element for the transition from IPv4 to IPv6
Policy routing
allows custom filters for increased performance and security; supports ACLs, IP prefix, AS paths, community lists, and aggregate policies
Bidirectional Forwarding Detection (BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Multicast Routing PIM Dense and Sparse modes
provides robust support of multicast protocols
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports static routing, RIPng, OSPFv3, BGP4+ for IPv6, and IS-ISv6
Green IT and power
USB support
formation
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
6
Port mirroring
Security
Convergence
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
Remote configuration and management
is available through a CLI
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications
sFlow (RFC 3176)
provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
Command authorization
leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents activity
Dual flash images
provides independent primary and secondary operating system files for backup while upgrading
Command-line interface (CLI)
provides a secure, easy-to-use CLI for configuring the module via SSH or a switch console; provides direct real-time session visibility
Logging
provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce the number of log events generated
Management interface control
provides management access through a modem port and terminal interface, as well as in-band and out-of-band Ethernet ports; provides access through terminal interface, Telnet, or secure shell (SSH)
Industry-standard CLI with a hierarchical structure
reduces training time and expenses, and increases productivity in multivendor installations
Management security
restricts access to critical configuration commands; offers multiple privilege levels with password protection; ACLs provide Telnet and SNMP access; local and remote syslog capabilities allow logging of all access
Information center
provides a central repository for system and network information; aggregates all logs, traps, and debugging information generated by the system and maintains them in order of severity; outputs the network information to multiple channels based on user-defined rules
Network management
HPE IMC centrally configures, updates, monitors, and troubleshoots
Remote intelligent mirroring
mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network
Access control lists (ACLs)
RADIUS/TACACS+
Secure shell
IEEE 802.1X and RADIUS network logins
Port security
provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
eases switch management security administration by using a password authentication server
encrypts all transmitted data for secure remote CLI access over IP networks
controls port-based access for authentication and accountability
allows access only to specified MAC addresses, which can be learned or specified by the administrator
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Overview
7
LLDP-MED (Media Endpoint Discovery)
defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to configure automatically
Warranty and support
; for details on the software releases
HPE Recommended Options have the best performance, value and availability.
Recommended Options
workloads and market segments.
nd security experience, Recommended Options
provide the best fit with timely availability.
Extended Options
requiring the utmost in performance or value. Options represent great value and performance but
network devices such as IP phones
1-year warranty
see http://www.hpe.com/networking/warrantysummary product purchase.
Software releases
to find software for your product, refer to http://www.hpe.com/networking/support available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
for warranty and support information included with your
have been selected by Hewlett Packard Enterprise experts to provide the right technology for a range of
Fully integrated into the ProLiant management a
View the list for your region.
provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
Fully integrated into the ProLiant management and security experience, Extended
typically have a longer lead-time.
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series

Configuration

8
Build To Order
Shippable solution.
Standard Switch Enclosures
HPE FlexFabric 5940 32QSFP+ Switch
JH396A
1U - Height
See Configuration
HPE FlexFabric 5940 2-slot Switch
JH397A
1U - Height
See Configuration
HPE FlexFabric 5940 4-slot Switch
JH398A
2U - Height
HPE FlexFabric 5940 2-slot 2QSFP+ Front-to-Back AC Bundle
JQ041A
1U - Height
See Configuration
PDU Cable NA/MEX/TW/JP
JQ041A#B2B
PDU Cable ROW
JQ041A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ041A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ041A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 2-slot 2QSFP+ Back-to-Front AC Bundle
JQ042A
• Includes 2 Power Supply (JC680A)
See Configuration
: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
32 QSFP+ ports (min=0 \ max=32)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
• Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 2
NOTE: 2
4 port expansion module slots
Must select min 2 Power Supply
• Must select min 2 Fan Trays
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
• Includes 2 Power Supply (JC680A)
Includes 2 Fan Trays (JG552A)
C15 PDU Jumper Cord (NA/MEX/TW/JP)
NOTE: 2
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
NOTE: 2
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
9
1U - Height
PDU Cable NA/MEX/TW/JP
JQ042A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ042A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ042A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ042A#AC3
HPE FlexFabric 5940 4-slot Front-to-Back AC Bundle
JQ043A
2U - Height
PDU Cable NA/MEX/TW/JP
JQ043A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ043A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ043A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ043A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 4-slot Back-to-Front AC Bundle
JQ044A
2U - Height
PDU Cable NA/MEX/TW/JP
JQ044A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ044A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ044A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ044A#AC3
Includes 2 Fan Trays (JG553A)
No Localized Power Cord Selected
4 port expansion module slots
• Includes 4 Power Supply (JC680A)
Includes 2 Fan Trays (JH186A)
4 port expansion module slots
• Includes 4 Power Supply (JC680A)
Includes 2 Fan Trays (JH185A)
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
10
No Localized Power Cord Selected
HPE FlexFabric 5940 48SFP+ 6QSFP+ Switch
JH395A
1U - Height
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP+ Switch
JH394A
See Configuration
HPE FlexFabric 5940 48SFP+ 6QSFP28 Switch
JH390A
1U - Height
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP28 Switch
JH391A
1U - Height
See Configuration
Configuration Rules
Note 1
The following SFP+ Transceivers install into this Switch:
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable
JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable
JL292A
Note 2
The following QSFP+ Transceivers install into this switch:
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ LC ER4 40km SM Transceiver
JL306A
48 SFP+ ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
• Must select min 1 Power Supply
• Must select min 2 Fan Trays
1U - Height
48 SFP+ ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 1, 2, 4, 5
NOTE: 2, 5
NOTE: 1, 3, 5, 7
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 3, 5, 7, 8
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
11
HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver
JL286A
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JG331A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
JL289A
Note 3
The following QSFP28 Transceivers install into this switch:
HPE X150 100G QSFP28 MPO SR4 100m MM Transceiver
JL274A
HPE X150 100G QSFP28 LC LR4 10km SM Transceiver
JL275A
HPE X2A0 100G QSFP28 to QSFP28 7m Active Optical Cable
JL276A
HPE X2A0 100G QSFP28 to QSFP28 10m Active Optical Cable
JL277A
HPE X2A0 100G QSFP28 to QSFP28 20m Active Optical Cable
JL278A
HPE X150 100G QSFP28 MPO PSM4 500m SM Transceiver
JH420A
HPE X150 100G QSFP28 CWDM4 2km SM Transceiver
JH673A
HPE X240 100G QSFP28 to QSFP28 1m Direct Attach Copper Cable
JL271A
HPE X240 100G QSFP28 to QSFP28 3m Direct Attach Copper Cable
JL272A
HPE X240 100G QSFP28 to QSFP28 5m Direct Attach Copper Cable
JL273A
Note 4
If this switch is configured for an NFV solution(Q0F04A - HPE NFV System V1.3 3Par Storage Block), default no less than the quantities specified below for the following components: Qty 2 Qty 2 Qty 4 Qty 1 - JG326A (min 1)
Note 5
The following SFP Transceivers install into this Switch:
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
Note 6
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu) REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be option on the Switches/Routers.
Note 7
The following 40G Transceivers install into this Module's QSFP+ Ports: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ LC ER4 40km SM Transceiver
JL306A
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver
JL286A
- JG553A (min 2)
- JC680A (min 2)
- JD092B (min 4)
the Defaulted Power Cable
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
12
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
JL289A
Note 8
The following 100G Transceivers install into this Switch's QSFP28 Ports: (Use #0D1 or #B01 if switch is CTO) - if applicable
JH419A - HPE X150 100G QSFP28 SWDM4 100m MM XCVR
Remarks:
Drop down under power supply should offer the following options and results: Switch/Router to PDU Power Cord
#B2B in NA, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO) Switch/Router/Power Supply to Wall Power Cord Hi Taiwan, and Japan) No Power Cord
OCA Only Model Selection Form HPE Offering > DataCenter Networking > FlexFabric Switches 5940 DCN Switch Series
Box Level Integration CTO Models
CTO Solution Sku
HPE 59xx CTO Switch Solution
JG505A
See Configuration
Configuration Rules
Note 1
Clic UNB - Min/Max 1 CTO switch per SSP.
CTO Switch Chassis
HPE FlexFabric 5940 32QSFP+ Switch
JH396A
1U - Height
See Configuration
HPE FlexFabric 5940 2-slot Switch
JH397A
1U - Height
See Configuration
-
- Localized Option (Watson Default for BTO and Box Level CTO)
gh Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
- #AC3 Option
-
- Access:
SSP trigger sku
32 QSFP+ ports (min=0 \ max=32)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 1
NOTE: 2, 4
NOTE: 2, 4
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
13
HPE FlexFabric 5940 4-slot Switch
JH398A
2U - Height
See Configuration
HPE FlexFabric 5940 48SFP+ 6QSFP+ Switch
JH395A
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP+ Switch
JH394A
1U - Height
See Configuration
HPE FlexFabric 5940 48SFP+ 6QSFP28 Switch
JH390A
1U - Height
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP28 Switch
JH391A
1U - Height
See Configuration
Configuration Rules
Note 1 The following SFP+ Transceivers install into this Switch: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable
JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable
JL292A
Note 2
The following QSFP+ Transceivers install into this switch:
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
4 port expansion module slots
• Must select min 2 Power Supply
• Must select min 2 Fan Trays
48 SFP+ ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
1U - Height
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 4
NOTE: 1, 2, 4, 5, 6
NOTE: 2, 4, 6
48 SFP+ ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 1, 3, 4, 6, 7
NOTE: 3, 4, 6, 7, 8
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
14
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ LC ER4 40km SM Transceiver
JL306A
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JG331A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
JL289A
Note 3
The following QSFP28 Transceivers install into this switch:
HPE X150 100G QSFP28 MPO SR4 100m MM Transceiver
JL274A
HPE X150 100G QSFP28 LC LR4 10km SM Transceiver
JL275A
HPE X2A0 100G QSFP28 to QSFP28 7m Active Optical Cable
JL276A
HPE X2A0 100G QSFP28 to QSFP28 10m Active Optical Cable
JL277A
HPE X2A0 100G QSFP28 to QSFP28 20m Active Optical Cable
JL278A
HPE X150 100G QSFP28 MPO PSM4 500m SM Transceiver
JH420A
HPE X240 100G QSFP28 to QSFP28 1m Direct Attach Copper Cable
JL271A
HPE X240 100G QSFP28 to QSFP28 3m Direct Attach Copper Cable
JL272A
HPE X240 100G QSFP28 to QSFP28 5m Direct Attach Copper Cable
JL273A
Note 4
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and integrated to the JG505A - HPE 59xx CTO Switch Solution. (Min 1/Max 1 Router per SSP)
Note 5
If this switch is configured for an NFV solution(Q0F04A - HPE NFV System V1.3 3Par Storage Block), default no less than the quantities specified below for the following components: Qty 2 Qty 2 Qty 4 Qty 1 - JG326A (min 1)
Note 6
The following SFP Transceivers install into this Switch: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
Note 7
The following 40G Transceivers install into this Module's QSFP+ Ports: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ LC ER4 40km SM Transceiver
JL306A
HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver
JG709A
HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver
JL286A
- JG553A (min 2)
- JC680A (min 2)
- JD092B (min 4)
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
15
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
JL289A
Note 8
The following 100G Transceivers install into this Switch's QSFP28 Ports: (Use #0D1 or #B01 if switch is CTO)
JH419A - HPE X150 100G QSFP28 SWDM4 100m MM XCVR
Remarks:
Clic UNB - If an option is ordered with #0D1/#B01, then the switch must have #0D1 option.
Rack Level Integration CTO Models
CTO Switch Chassis
HPE FlexFabric 5940 32QSFP+ Switch
JH396A
1U - Height
See Configuration
HPE FlexFabric 5940 2-slot Switch
JH397A
1U - Height
See Configuration
HPE FlexFabric 5940 4-slot Switch
JH398A
2U - Height
See Configuration
HPE FlexFabric 5940 2-slot 2QSFP+ Front-to-Back AC Bundle
JQ041A
1U - Height
See Configuration
PDU Cable NA/MEX/TW/JP
JQ041A#B2B
PDU Cable ROW
JQ041A#B2C
- if applicable
32 QSFP+ ports (min=0 \ max=32)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
Must select min 1 Power Supply
• Must select min 2 Fan Trays
4 port expansion module slots
Must select min 2 Power Supply
• Must select min 2 Fan Trays
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
• Includes 2 Power Supply (JC680A)
Includes 2 Fan Trays (JG552A)
NOTE: 2, 4
NOTE: 2
NOTE: 4
NOTE: 2
C15 PDU Jumper Cord (NA/MEX/TW/JP)
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
16
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ041A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ041A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 2-slot 2QSFP+ Back-to-Front AC Bundle
JQ042A
1U - Height
See Configuration
PDU Cable NA/MEX/TW/JP
JQ042A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ042A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ042A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ042A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 4-slot Front-to-Back AC Bundle
JQ043A
2U - Height
PDU Cable NA/MEX/TW/JP
JQ043A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ043A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ043A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ043A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 4-slot Back-to-Front AC Bundle
JQ044A
Includes 2 Fan Trays (JH185A)
2 QSFP+ ports (min=0 \ max=2)
2 port expansion module slots
• Includes 2 Power Supply (JC680A)
Includes 2 Fan Trays (JG553A)
NOTE: 2
4 port expansion module slots
• Includes 4 Power Supply (JC680A)
Includes 2 Fan Trays (JH186A)
4 port expansion module slots
Includes 4 Power Supply (JC680A)
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
17
2U - Height
PDU Cable NA/MEX/TW/JP
JQ044A#B2B
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JQ044A#B2C
C15 PDU Jumper Cord (ROW)
High Volt Power Supply to Wall Power Cord
JQ044A#B2E
NEMA L6-20P Cord (NA/MEX/JP/TW)
No Power Cord
JQ044A#AC3
No Localized Power Cord Selected
HPE FlexFabric 5940 48SFP+ 6QSFP+ Switch
JH395A
1U - Height
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP+ Switch
JH394A
1U - Height
See Configuration
HPE FlexFabric 5940 48SFP+ 6QSFP28 Switch
JH390A
1U - Height
See Configuration
HPE FlexFabric 5940 48XGT 6QSFP28 Switch
JH391A
1U – Height
See Configuration
Configuration Rules
Note 1 The following SFP+ Transceivers install into this Switch: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
48 SFP+ ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 1, 2, 4, 5, 6
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP+ ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
48 SFP+ ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
Must select min 1 Power Supply
• Must select min 2 Fan Trays
48 1/10BaseT GbE ports (min=0 \ max=48)
6 QSFP28 ports (min=0 \ max=6)
• Must select min 1 Power Supply
• Must select min 2 Fan Trays
NOTE: 2, 4, 6
NOTE: 1, 3, 4, 6, 7
NOTE: 3, 4, 6, 7
Page
QuickSpecs
HPE FlexFabric 5940 Switch Series
Configuration
18
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
JL290A
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable
JL291A
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable
JL292A
Note 2
The following QSFP+ Transceivers install into this switch:
HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver
JG661A
HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver
JL251A
HPE X140 40G QSFP+ LC ER4 40km SM Transceiver
JL306A
HPE X140 40G QSFP+ MPO SR4 Transceiver
JG325B
HPE X140 40G QSFP+ LC LR4L 2km SM Transceiver
JL286A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
JG326A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
JG327A
HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
JG328A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
JG330A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable
JG331A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
JL289A
Note 3
The following QSFP28 Transceivers install into this switch:
HPE X150 100G QSFP28 MPO SR4 100m MM Transceiver
JL274A
HPE X150 100G QSFP28 LC LR4 10km SM Transceiver
JL275A
HPE X2A0 100G QSFP28 to QSFP28 7m Active Optical Cable
JL276A
HPE X2A0 100G QSFP28 to QSFP28 10m Active Optical Cable
JL277A
HPE X2A0 100G QSFP28 to QSFP28 20m Active Optical Cable
JL278A
HPE X150 100G QSFP28 MPO PSM4 500m SM Transceiver
JH420A
HPE X240 100G QSFP28 to QSFP28 1m Direct Attach Copper Cable
JL271A
HPE X240 100G QSFP28 to QSFP28 3m Direct Attach Copper Cable
JL272A
HPE X240 100G QSFP28 to QSFP28 5m Direct Attach Copper Cable
JL273A
HPE X150 100G QSFP28 CWDM4 2km SM Transceiver
JH673A
Note 4
If HPE CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the Rack.
Note 5
If this switch is configured for an NFV solution(Q0F04A - HPE NFV System V1.3 3Par Storage Block), default no less than the quantities Qty 2 Qty 2 Qty 4 Qty 1 - JG326A (min 1)
Note 6
The following SFP Transceivers install into this Switch: (Use #0D1 or #B01 if switch is CTO) - if applicable
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
specified below for the following components:
- JG553A (min 2)
- JC680A (min 2)
- JD092B (min 4)
Page
Loading...
+ 42 hidden pages