QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
1
HPE OfficeConnect 1420 Switch Series
Models
HPE OfficeConnect 1420 16G Switch
JH016A
HPE OfficeConnect 1420 24G 2SFP Switch
JH017A
HPE OfficeConnect 1420 24G 2SFP+ Switch
JH018A
HPE OfficeConnect 1420 24G PoE+ (124W) Switch
JH019A
HPE OfficeConnect 1420 5G Switch
JH327A
HPE OfficeConnect 1420 5G PoE+ (32W) Switch
JH328A
HPE OfficeConnect 1420 8G Switch
JH329A
HPE OfficeConnect 1420 8G PoE+ (64W) Switch
JH330A
HPE OfficeConnect 1420 24G Switch
JG708B
Key features
• Unmanaged plug-and-play Gigabit Ethernet switching
Product overview
The HPE OfficeConnect 1420 Switch Series consists of unmanaged Gigabit Ethernet switches, for small business and others
looking for plug
The HPE OfficeConnect 1420 Swi
and others looking for plug
switches: 16
Power over Ethernet (PoE+) enabled with a total PoE power budget of 124W, and 24
ports. The 1420 Switch Series also includes a 5
8
are fanless for silent operation. They come with a limited lifetime Warranty.
• Green features for low power consumption
• Fanless design for silent operation
• Quality of Service capabilities for improved network efficiency
• Limited lifetime warranty
-and-play basic Layer 2 connectivity for their network, including low-cost PoE+ and 10-Gigabit uplink models.
tch Series consists of unmanaged business-class Gigabit Ethernet switches for small business
-and-play basic Layer 2 connectivity for their network. The 1420 Switch Series includes nine Gigabit
-port 10/100/1000, 24-port 10/100/1000 with two SFP Gigabit ports, 24-port 10/100/1000 ports of which 12 are
-port 10/100/1000, 8-port 10/100/1000 with 8 out of 8 ports as PoE+ ports and a simple 24 port 10/100/1000 switch. They
-port 10/100/1000, 5-port 10/100/1000 with 4 out of 5 ports as PoE+ ports, an
-port 10/100/1000 with two SFP+ 10GbE
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
2
HPE OfficeConnect 1420 switches have quality of service (QoS) support and IEEE 802.3x flow control features that improve
network efficiency. Simplified plug
Hewlett Packard Enterprise has innovated and combined the latest advances in silicon technology to bring you some of the most
power
mode on idle ports and power saving on short-distance cables. With their fanless silent operation, these switches are ideal for office
deployment. HPE OfficeConnect 1420 switches come with a limited lifetime warranty.
Features and benefits
Ease of use
Connectivity
Performance
Flexibility
Quality of Service (QoS)
-and-play convenience is supported by features such as auto-MDIX and auto-speed negotiation.
-efficient switches. All models support the Energy Efficient Ethernet IEEE 802.3az standard, as well as auto power-down
• Unmanaged
provides plug-and-play simplicity
• Auto-speed negotiation
selects individual port speed automatically, depending on client capabilities; removing the need for manual intervention
enables simple plug-and-play operation
• Comprehensive LED display with per-port indicators
provides an at-a-glance view of the status, activity, speed, and full-duplex operation of the switches
• Flow control
helps ensure reliable communications during full-duplex operation
• HPE/IEEE Auto-MDIX
automatically adjusts for straight-through or crossover cables on all RJ-45 ports
• Gigabit Ethernet 10/100/1000 Connectivity
• 10-Gigabit fiber connectivity
• IEEE 802.3at Power over Ethernet (PoE+)
• Energy-efficient Ethernet support
• Half-/full-duplex auto-negotiating capability on every port
• Jumbo frame support
supports high-speed Ethernet connections over highly affordable copper Category 5 cabling.
Future-proof 10-Gigabit technology allows high-speed fiber connection to servers or other switches, with connection
flexibility using optional SFP+ or SFP transceivers.
provides up to 30 W per port, which allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af compliant end device; reduces the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments (for PoE model)
supports new IEEE 802.3az standard; and allows lower power consumption, when operated with IEEE-compliant client
devices in 100 Mb/s mode only
doubles the throughput of every port.
allows frames up to 9,216 bytes to be switched through the network
• Fanless design
enables quiet operation for deployment in open spaces
• Internal power supply
delivers operational convenience and an environment suitable for business operations
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Overview
3
Warranty and support
• IEEE 802.1p prioritization
delivers data to devices, based on the priority and type of traffic
• DiffServ Code Point (DSCP) support
allows real-time traffic prioritization, based on L3 TOS/DSCP parameters
• Limited Lifetime Warranty
See http://www.hpe.com/officeconnect/support
purchase.
for warranty and support information included with your product
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
4
Build To Order
Shippable solution.
HPE OfficeConnect 1420 24G Switch
JG708B
•
See
NOTE:3
PDU Cable NA/MEX/TW/JP
JG708B#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JG708B#B2C
•
High Volt Switch/Router to Wall Power Cord
JG708B#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 5G Switch
JH327A
•
See
NOTE:3
PDU Cable NA/MEX/TW/JP
JH327A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH327A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH327A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 5G PoE+ (32W) Switch
JH328A
•
See
NOTE:3
PDU Cable NA/MEX/TW/JP
JH328A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH328A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH328A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 8G Switch
JH329A
• 1U - Height
: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-
24 RJ-45 autosensing 10/100/1000 ports
Configuration
C15 PDU Jumper Cord (ROW)
5 RJ-45 autosensing 10/100/1000 ports
• 1U - Height
5 RJ-45 autosensing 10/100/1000 ports
• 1U - Height
Configuration
Configuration
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
5
•
See
NOTE: 3
PDU Cable NA/MEX/TW/JP
JH329A#B2B
•
PDU Cable NA/MEX/TW/JP
JH329A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH329A#B2E
•
HPE OfficeConnect 1420 8G PoE+ (64W) Switch
JH330A
•
See
NOTE: 3
PDU Cable NA/MEX/TW/JP
JH330A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH330A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH330A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 16G Switch
JH016A
•
See
NOTE: 3
PDU Cable NA/MEX/TW/JP
JH016A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH016A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH016A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 24G 2SFP Switch
JH017A
•
•
See
PDU Cable NA/MEX/TW/JP
JH017A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
• 1U - Height
• 1U - Height
8 RJ-45 autosensing 10/100/1000 ports
Configuration
C15 PDU Jumper Cord (NA/MEX/TW/JP)
NEMA L6-20P Cord (NA/MEX/JP/TW)
8 RJ-45 autosensing 10/100/1000 ports
Configuration
16 RJ-45 autosensing 10/100/1000 ports
• 1U - Height
24 RJ-45 autosensing 10/100/1000 ports
• 2 SFP 100/1000 Mbps ports
• min=0 \ max=2 SFP Transceivers
1U - Height
Configuration
Configuration
NOTE:1, 3
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
6
PDU Cable NA/MEX/TW/JP
JH017A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH017A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
HPE OfficeConnect 1420 24G 2SFP+ Switch
JH018A
•
• 1U - Height
See
PDU Cable NA/MEX/TW/JP
JH018A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH018A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH018A#B2E
•
HPE OfficeConnect 1420 24G PoE+ (124W) Switch
JH019A
•
See
NOTE: 3
PDU Cable NA/MEX/TW/JP
JH019A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable NA/MEX/TW/JP
JH019A#B2C
• C15 PDU Jumper Cord (ROW)
High Volt Switch/Router to Wall Power Cord
JH019A#B2E
• NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
Note 2
The following Transceivers install into this switch:
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X240 10G SFP+ SFP+ 0.65m DAC C-Cable
JH693A
HPE X240 10G SFP+ SFP+ 1.2m DAC C-Cable
JH694A
HPE X240 10G SFP+ SFP+ 3m DAC C-Cable
JH695A
24 RJ-45 autosensing 10/100/1000 ports
• 2 fixed 1000/10000 SFP+ ports
• min=0 \ max=2 SFP+ Transceivers
Configuration
NOTE: 1, 2, 3
NEMA L6-20P Cord (NA/MEX/JP/TW)
24 RJ-45 autosensing 10/100/1000 ports
• 1U - Height
Configuration
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Configuration
7
Note 3
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) or
#B2E. (See Localization Menu)
Remarks:
OCA Only Model Selection Form HPE Offering > Aruba > OfficeConnect - Unmanaged Switch: 1420 Switch Series
Transceivers
SFP Transceivers
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
SFP+ Transceivers
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X240 10G SFP+ SFP+ 0.65m DAC C-Cable
JH693A
HPE X240 10G SFP+ SFP+ 1.2m DAC C-Cable
JH694A
HPE X240 10G SFP+ SFP+ 3m DAC C-Cable
JH695A
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
8
HPE OfficeConnect 1420 16G Switch (JH016A)
I/O ports and slots
16 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Supports a maximum of 16 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
10.47(w) x 6.38(d) x 1.73(h) in (26.6 x 16.2 x 4.4 cm) (1U height)
Weight
2.65 lb (1.2 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Wall, desktop and under-table
mounting
Performance
100 Mb Latency
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 23.8 Mpps (64-byte packets)
Switching capacity
32 Gbps
MAC address table size
8192 entries
Reliability
MTBF (years)
153.3
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.2 A
Maximum power rating
12 W
Notes
Maximum power rating and maximum heat dissipation are the worst-
power cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
< 8 µs (LIFO 64-byte packets)
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
9
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G 2SFP Switch (JH017A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP ports
Physical characteristics
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
Weight
4.85 lb (2.2 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting
Performance
100 Mb Latency
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 38.7 Mpps (64-byte packets)
Switching capacity
52 Gbps
MAC address table size
8192 entries
Reliability
MTBF (years)
126.1
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.3 A
Maximum power rating
18 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
plugged in, and all
This model provides internal power supply. Please select the correct power
cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
details on the service-level descriptions and product numbers. For details about services and response
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 SFP 100/1000 Mbps ports
< 8 µs (LIFO 64-byte packets)
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports
modules populated.
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
10
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
Use only supported genuine HPE transceivers with your switch.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G 2SFP+ Switch (JH018A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP+ ports
Physical characteristics
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
Weight
6.39 lb (2.9 kg)
Memory and processor
8 MB flash; Packet buffer size: 1.5 MB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting
Performance
100 Mb Latency
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
10 Gbps Latency
Throughput
up to 65.5 Mpps (64-byte packets)
Switching capacity
88 Gbps
MAC address table size
16384 entries
Reliability
MTBF (years)
109.4
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
Nonoperating/Storage
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
details on the service-level descriptions and product numbers. For details about services and response
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
2 fixed 1000/10000 SFP+ ports
< 8 µs (LIFO 64-byte packets)
< 2 µs (LIFO 64-byte packets)
temperature
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
11
Current
0.4 A
Maximum power rating
21 W
Notes
Maximum power rating and maximum heat dissipation are the worst-case
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
This model provides internal power supply. Please select the correct power
cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
Use only supported genuine HPE transceivers with your switch.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G PoE+ (124W) Switch (JH019A)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 9.37(d) x 1.73(h) in (44 x 23.8 x 4.4 cm) (1U height)
Weight
7.28 lb (3.3 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting
Performance
100 Mb Latency
1000 Mb Latency
< 16 µs (LIFO 64-byte packets)
Throughput
up to 35.7 Mpps (64-byte packets)
Switching capacity
48 Gbps
MAC address table size
8192 entries
Reliability
MTBF (years)
69.9
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95%, noncondensing
theoretical maximum numbers provided for planning the infrastructure
modules populated.
details on the service-level descriptions and product numbers. For details about services and response
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
< 8 µs (LIFO 64-byte packets)
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
12
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Current
0.3/1.8 A
Maximum power rating
160 W
PoE power
124 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worst-
supply. Please select the correct power cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 5G Switch (JH327A)
I/O ports and slots
5 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
or full; 1000BASE-T: full only
Physical characteristics
Dimensions
4.52(w) x 3.18(d) x 1.06(h) in (11.48 x 8.08 x 2.69 cm)
Weight
0.66 lb (0.3 kg)
Memory and processor
Packet buffer size: 1 Mb
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
This product provides PoE or PoE+ power across 12 of 24 ports, with a
total power budget of 124W. This model is designed with internal power
details on the service-level descriptions and product numbers. For details about services and response
TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
13
Mounting and enclosure
Desktop (rear port)
Performance
100 Mb Latency
< 3 μs
1000 Mb Latency
< 2.6 μs
Throughput
up to 7.4 Mpps
Routing/Switching
capacity
10 Gbps
MAC address table size
2048 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
15% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95%, noncondensing
Acoustic
Fanless
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Maximum power rating
3.0 W
Notes
Maximum power rating and maximum heat dissipation are the worst-
plugged in, and all modules populated.
Safety
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 5G POE+ (32W) Switch (JH328A)
humidity
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
details on the service-level descriptions and product numbers. For details about services and response
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
14
I/O ports and slots
5 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
or full; 1000BASE-T: full only
Physical characteristics
Dimensions
6.21(w) x 4.13(d) x 1.06(h) in (15.77 x 10.49 x 2.69 cm)
Weight
1.10 lb (0.5 kg)
Memory and processor
Packet buffer size: 1 Mb
Mounting and enclosure
Desktop (rear port)
Performance
100 Mb Latency
1000 Mb Latency
< 2.6 μs
Throughput
up to 7.4 Mpps
Routing/Switching
10 Gbps
MAC address table size
2048 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
15% to 95%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95%, noncondensing
Acoustic
Fanless
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Powered by PoE
Maximum power rating
40 W
Notes
Maximum power rating and maximum heat dissipation are the worst-
Please select the correct power cord country option.
Safety
UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
< 3 μs
capacity
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power supplied
by External Power Supply (EPS). This product provides PoE or PoE+
power across 4 of 5 ports, with a total power budget of 32W.
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
15
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 8G Switch (JH329A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
6.21(w) x 4.13(d) x 1.06(h) in (15.77 x 10.49 x 2.69 cm)
Weight
1.10 lb (0.5 kg)
Memory and processor
Packet buffer size: 1.5 Mb
Mounting and enclosure
Desktop (rear port)
Performance
100 Mb Latency
1000 Mb Latency
< 2.6 μs
Throughput
up to 11.8 Mpps
Routing/Switching
capacity
16 Gbps
MAC address table size
4096 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 104°F (40°C), noncondensing
Acoustic
Fanless
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Maximum power rating
4.5 W
Notes
Maximum power rating and maximum heat dissipation are the worst-
plugged in, and all modules populated.
Safety
EN 60950/IEC 60950; UL 60950; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1-03
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
details on the service-level descriptions and product numbers. For details about services and response
TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
or full; 1000BASE-T: full only
< 3 μs
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
16
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
magnetic field
IEC 61000-4-8
Voltage dips and
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
HPE OfficeConnect 1420 8G PoE+ (64W) Switch (JH330A)
I/O ports and slots
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-
Supports a maximum of 8 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
9.24(w) x 4.13(d) x 1.06(h) in (23.47 x 10.49 x 2.69 cm)
Weight
1.54 lb (0.7 kg)
Memory and processor
Packet buffer size: 1.5 Mb
Mounting and enclosure
Desktop (rear port)
Performance
100 Mb Latency
< 3 μs
1000 Mb Latency
Throughput
up to 11.8 Mpps
Routing/Switching
capacity
16 Gbps
MAC address table size
4096 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 104°F (40°C), noncondensing
Altitude
up to 10,000 ft (3 km)
Acoustic
Fanless
Electrical characteristics
Frequency
50/60 Hz
Voltage
100 - 240 VAC, rated
Maximum power rating
80 W
PoE power
64 W PoE+
Notes
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
interruptions
details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.
TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half
or full; 1000BASE-T: full only
< 2.6 μs
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
17
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
Please select the correct power cord country option.
Safety
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
HPE OfficeConnect 1420 24G Switch (JG708B)
I/O ports and slots
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
Supports a maximum of 24 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
17.32(w) x 6.81(d) x 1.73(h) in (44 x 17.3 x 4.4 cm) (1U height)
Weight
6.61 lb (3 kg)
Memory and processor
1 MB flash; Packet buffer size: 512 KB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack (hardware included); Desktop mounting
Performance
100 Mb Latency
< 8.0 μs (LIFO 64-byte packets)
1000 Mb Latency
Throughput
up to 35.7 Mpps (64-byte packets)
Switching capacity
48 Gbps
MAC address table size
8192 entries
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
Operating relative
humidity
5% to 95% @ 104°F (40°C), noncondensing
plugged in, and all modules populated.
PoE Power is the power supplied by the internal power supply, it is
dependent on the type and quantity of power supplies and may be
supplemented with the use of a External Power Supply (EPS).
Maximum power rating and maximum heat dissipation are the worstcase theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated. PoE Power is the power supplied
by External Power Supply (EPS). This product provides PoE or PoE+
power across all 8 ports, with a total power budget of 64W.
magnetic field
details on the service-level descriptions and product numbers. For details about services and response
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASET/100BASE-TX: half or full; 1000BASE-T: full only
< 16 μs (LIFO 64-byte packets)
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
18
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 90% @ 149°F (65°C), noncondensing
Altitude
up to 16,404 ft (5 km)
Acoustic
Power: 0 dB No fan
Electrical characteristics
Frequency
50/60 Hz
Maximum heat
dissipation
55 BTU/hr (58 kJ/hr)
Voltage
100 - 240 VAC, rated
Current
0.3 A
Maximum power rating
16 W
Notes
Maximum power rating and maximum heat dissipation are the worst-
power cord country option.
Safety
CSA 22.2 No. 60950; UL 60950-1; IEC 60950-1; EN 60950-1
Emissions
FCC Rules Part 15, Subpart B Class A
Immunity
Generic
EN 55022 CISPR 22
EN
EN 55024, CISPR 24
ESD
IEC 61000-4-2
Radiated
IEC 61000-4-3
EFT/Burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conducted
IEC 61000-4-6
Power frequency
IEC 61000-4-8
Voltage dips and
interruptions
IEC 61000-4-11
Harmonics
IEC 61000-3-2
Flicker
IEC 61000-3-3
Notes
HP 1410-24G-R Switch (JG708A), HPE OfficeConnect 1410 16 Switch (J9662A) and HPE
OfficeConnect 1410 24 Switch (J9663A) Switches.
Services
Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for
times in your area, please contact your local Hewlett Packard Enterprise sales office.
Standards and protocols
General protocols
IEEE 802.3u 100BASE-TX Fast Ethernet, 100BASE-FX with autonegotiation
case theoretical maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports
plugged in, and all modules populated.
This model provides internal power supply. Please select the correct
magnetic field
details on the service-level descriptions and product numbers. For details about services and response
(applies to all products in
series)
IEEE 802.1p Priority
IEEE 802.3ab 1000BASE-T
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3i 10BASE-T Ethernet over twisted pair
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Technical Specifications
19
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X Gigabit Ethernet over fiber
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Accessories
20
HPE OfficeConnect 1420 Switch Series accessories
Cables
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
HPE OfficeConnect 1420 24G 2SFP Switch (JH017A)
Aruba 1G SFP LC LX 10km SMF Transceiver
J4859D
Aruba 1G SFP LC SX 500m OM2 MMF Transceiver
J4858D
Aruba 1G SFP RJ45 T 100m Cat5e Transceiver
J8177D
Aruba 100M SFP LC FX 2km MMF Transceiver
J9054D
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE OfficeConnect 1420 24G 2SFP+ Switch (JH018A)
Aruba 1G SFP LC LX 10km SMF Transceiver
J4859D
Aruba 1G SFP LC SX 500m OM2 MMF Transceiver
J4858D
Aruba 1G SFP RJ45 T 100m Cat5e Transceiver
J8177D
Aruba 100M SFP LC FX 2km MMF Transceiver
J9054D
HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable
JH693A
HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable
JH694A
HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable
JH695A
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
Page
QuickSpecs
HPE OfficeConnect 1420 Switch Series
Summary of Changes
21
Date
Version History
Action
Description of Change
07-May-2018
Version 9
Changed
Configuration and Accessories updated
04-Sep-2017
Version 8
Changed
Updates made on Features and benefits
12-Aug-2016
Version 7
Added
SKU added to Accessories section: JD102B
Changed
SKU descriptions updated, Overview section updated
10-June-2016
Version 6
Changed
Minor edits made on Technical Specifications.
06-Jun-2016
Version 5
Added
Models added: JH327A, JH328A, JH329A, JH330A
15-Apr-2016
Version 4
Changed
QS name changed to HPE OfficeConnect 1420 Switch
31-Mar-2016
Version 3
Added
Models added: JG708B
Changed
Product overview updated
01-Dec-2015
Version 2
Changed
Overview, Features and Benefits and Technical
Specifications updated.
18-May-2015
Version 1
Created
Document creation
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such pro
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit:
c04609036
Series; SKU descriptions updated
ducts and services.
http://www.hpe.com/networking
- 15249 - Worldwide – V9 - 07-May-2018
Page
Loading...