QuickSpecs
HPE FlexFabric 5920 Switch Series
Overview
1
HPE FlexFabric 5920 Switch Series
Models
HPE FlexFabric 5920AF 24XG Switch
JG296A
Product overview
The HPE FlexFabric 5920 Switch Series is made up of high-density 10GbE, ultra-deep packet buffering, top-of-rack (ToR)
switches. These switches are part of the Hewlett Packard Enterprise (HPE) FlexNetwork architecture's HPE FlexFabric solution
module and are ideally suited
The HPE FlexFabric 5920 Switch Series is also designed for content delivery networks, especially when they are used to reduce
network congestion at the I/O that is associated wit
applications, and other critical services.
With the increase in virtualized applications and server
meet their needs for higher
virtual environments, and ultra-deep packet buffering all in a single device.
Key features
•
Features and benefits
Quality of Service (QoS)
• Powerful QoS features
for deployments at the server access layer of large enterprise data centers.
h the heavy use of server virtualization, as well as bursty multimedia, storage
-to-server traffic, businesses now require ToR switch innovations that will
-performance server connectivity, convergence of Ethernet and storage traffic, the capability to handle
Ultra-deep packet buffering
• HPE IRF for virtualization and a 2-tier architecture
• High 10GbE ToR port density
• IPv6 support in ToR with full L2/L3 features
• TRILL and VEPA readiness for virtualized networks
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Overview
2
o Flexible classification
(WDRR), SP+WDRR together, configurable buffers, Explicit Congestion Notification (ECN), and Weighted Random
Data center optimized
access networks; up to four HPE FlexFabric 5920 switches can be combined to deliver unmatched scalability of virtualized
Management
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of
Service (ToS) precedence; supports filter, redirect, mirror, remark, and logging
o Feature support
provides support for Strict Priority Queuing (SP), Weighted Fair Queuing (WFQ), Weighted Deficit Round Robin
Early Detection (WRED)
• High-performance 10 GbE switching
enables you to scale your server-edge 10GbE ToR deployments with 24 high-density 10GbE ports delivered in a 1RU
design; delivers a 480 Gbps (357.12 Mpps) switching capacity in addition to incorporating 3.6 GB of packet buffers
• Ultra-deep packet buffering
provides up to a 3.6 GB packet buffer to eliminate network congestion at the I/O that is associated with the heavy use of
server virtualization, as well as bursty multimedia, storage applications, and other critical
services
• Higher scalability
Hewlett Packard Enterprise (HPE) Intelligent Resilient Framework (IRF) technology simplifies the architecture of server
access layer switches and flatter, two-tier FlexFabric networks using IRF, which reduces cost and complexity
• Advanced modular operating system
Comware v7 software's modular design and multiple processes deliver native high stability, independent process
monitoring, and restart; the OS also allows individual software modules to be upgraded for higher availability and supports
enhanced serviceability functions like hitless software upgrades with single-chassis ISSU
• TRILL and VEPA ready
Transparent Interconnection of Lots of Links (TRILL) is supported to increase the scale of enterprise data centers;
EVB/VEPA provides connectivity into the virtual environment for a data center-ready environment
• Reversible airflow
switches are enhanced for data center hot/cold aisle deployments with reversible front-to-back or back-to-front airflow
• Redundant fans and power supplies
1+1 internal redundant and hot-pluggable power supplies and dual fan trays enhance reliability and availability
• Lower OPEX and greener data center
provide reversible airflow and advanced chassis power management
• Data Center Bridging (DCB) protocols
support IEEE 802.1Qbb Priority Flow Control (PFC), Data Center Bridging Exchange (DCBX), and IEEE 802.1Qaz
Enhanced Transmission Selection (ETS) for converged applications
• FCoE support
provides support for FCoE, including expansion, fabric, trunk VF and N ports, aggregation of E-port, N-port virtualization;
fabric services such as name server, registered state change notification, and login services; per-VSAN fabric services,
FSPF, soft and hard zoning, Fibre Channel traceroute, ping, debugging, and FIP snooping
• Jumbo frames
with frame sizes of up to 10,000 bytes on Gigabit Ethernet and 10-Gigabit ports, high-performance remote backup and
disaster-recovery services can be enabled
• IEEE 802.1ab LLDP discovery
• SNMPv1, v2c, and v3
• Port mirroring
advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network management applications
facilitate centralized discovery, monitoring, and secure management of networking devices
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Overview
3
• Out-of-band interface
Intelligent Management Center (IMC)
Resiliency and high availability
Layer 2 switching
Layer 3 services
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection
isolates management traffic from user data plane traffic for complete isolation and total reachability, no matter what
happens in the data plane
• Remote configuration and management
is available through a secure command-line interface (CLI) over Telnet and SSH; Role-Based Access Control (RBAC)
provides multiple levels of access; Configuration Rollback and multiple configurations on the flash provide ease of
operation; remote visibility with sFlow and SNMP v1/v2/v3 is fully supported in HPE
• ISSU and hot patching
provides hitless software upgrades with single-unit In Services Software Upgrade (ISSU) and hitless patching of modular
OS
• Autoconfiguration
provides automatic configuration via DHCP autoconfiguration
• Network Time Protocol (NTP) and Secure Network Time Protocol (SNTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clockdependent devices within the network so that the devices can provide diverse applications based on the consistent time
• Intelligent Resilient Fabric (IRF)
Hewlett Packard Enterprise (HPE) IRF technology enables an HPE FlexFabric to deliver resilient, scalable, and secured
data center networks for physical and virtualized environments; up to four 5920 switches can be grouped together in an
IRF configuration, which allows them to be configured and managed as a single switch with a single IP address; this
simplifies ToR deployment and management, reducing data center deployment and operating expenses
• Address Resolution Protocols (ARP)
supports static, dynamic, and reverse ARP and ARP proxy
• Flow Control
IEEE 802.3x Flow Control provides intelligent congestion management via PAUSE frames
• Ethernet Link Aggregation
IEEE 802.3ad Link Aggregation of up to 128 groups of 16 ports; support for LACP, LACP Local Forwarding First, and
LACP Short Timeout provide a fast, resilient environment that is ideal for the data center
• Spanning Tree Protocol (STP)
STP (IEEE 802.1D), Rapid STP (RSTP, IEEE 802.1w), and Multiple STP (MSTP, IEEE 802.1s) provide loop avoidance
• VLAN support
provides support for 4,096 VLANs based on port, MAC address, IPv4 subnet, protocol, and guest VLAN; supports VLAN
mapping
• IGMP support
provides support for IGMP Snooping, Fast-Leave, Group-Policy, and IPv6; IGMP Snooping provides Layer 2 optimization
of multicast traffic
• DHCP support at Layer 2
provides full DHCP Snooping support, including DHCP Snooping Option 82, DHCP Relay Option 82, DHCP Snooping
Trust, and DHCP Snooping Item Backup
• Address Resolution Protocol (ARP)
of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a
Layer 2 network
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Overview
4
• OAM support
Layer 3 routing
Additional information
Warranty and support
; for details on the software releases
provides support for Connectivity Fault Management (IEEE 802.1AG) and Ethernet in the First Mile (IEEE 802.3AH);
provides additional monitoring that can be used for fast fault detection and recovery
• Virtual Router Redundancy Protocol (VRRP) and VRRP Extended
allow quick failover of router ports
• Policy-based routing
makes routing decisions based on policies set by the network administrator
• Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
• Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, BGP, and IS-IS
• Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports RIPng, OSPFv3, BGP4+ for IPv6, and IS-ISv6
• Green IT and power
use the latest advances in silicon development, shut off unused ports, and use variable-speed fans to improve energy
efficiency
• Low power consumption
is rated to have one of the lowest power usages in the industry by Miercom independent tests
• 1-year warranty
see http://www.hpe.com/networking/warrantysummary
product purchase
• Software releases
to find software for your product, refer to http://www.hpe.com/networking/support
available with your product purchase, refer to http://www.hpe.com/networking/warrantysummary
for warranty and support information included with your
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Configuration
5
Build To Order:
BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.
Standard Switch Enclosures
HPE FlexFabric 5920AF 24XG Switch
JG296A
•
• 1U - Height
See Configuration
Configuration Rules:
Note 1
The following Transceivers install into this switch:
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LRM Data Center Transceiver
JL438A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE X130 10G SFP+ LC ER 40km Transceiver
JG234A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable
JH693A
HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable
JH694A
HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable
JH695A
HPE X240 10G SFP+ to SFP+ 7m Direct Attach Copper Campus-Cable
JH696A
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
Box Level Integration CTO Models
CTO Solution SKU
HP 59xx CTO Switch Solution
JG505A
• SSP trigger SKU
24 fixed 1000/10000 SFP+ ports
• min=0 \ max=24 SFP or SFP+ Transceivers
• Must select min 2 Fan Tray
• Must select min 1 Power Supply
NOTE:1
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Configuration
6
CTO Switch Chassis
HPE FlexFabric 5920AF 24XG Switch
JG296A
•
• 1U - Height
See Configuration
Configuration Rules:
Note 1
The following Transceivers install into this switch: (Use #0D1 or #B01 quoted to switch if
switch is CTO) - if applicable
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LRM Data Center Transceiver
JL438A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE X130 10G SFP+ LC ER 40km Transceiver
JG234A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable
JH693A
HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable
JH694A
HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable
JH695A
HPE X240 10G SFP+ to SFP+ 7m Direct Attach Copper Campus-Cable
JH696A
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
Note 10
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is
required on the Switch Chassis and integrated to the JG505A
Solution. (Min 1/Max 1 Switch per SSP)
Remarks:
Clic UNB - If an option is ordered with #0D1/#B01, then the switch must have #0D1
option.
Rack Level Integration CTO Models
CTO Switch Chassis
24 fixed 1000/10000 SFP+ ports
• (min=0 \ max=24 SFP or SFP+ Transceivers)
• Must select min 2 Fan Tray
• Must select min 1 Power Supply
NOTE:1, 10
- HP 59xx CTO Switch
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Configuration
7
HPE FlexFabric 5920AF 24XG Switch
JG296A
•
• 1U - Height
See Configuration
Configuration Rules:
Note 1
The following Transceivers install into this switch: (Use #0D1 or #B01 quoted to switch if
switch is CTO) - if applicable
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC ER 40km Transceiver
JG234A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) .
(See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the
Defaulted Power Cable option on the Switches/Routers.
Note 5
If HPE CTO Switch Chassis is selected for Rack Level Integration, Then the JG296A - HPE
5920AF-24XG Switch needs to integrate (with #0D1) to the HPE Rack.
Remarks:
Clic UNB - If an option is ordered with #0D1/#B01, then the switch must have #0D1
option.
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
24 fixed 1000/10000 SFP+ ports
• (min=0 \ max=24 SFP or SFP+ Transceivers)
• Must select min 2 Fan Tray
• Must select min 1 Power Supply
NOTE:1, 2, 5
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Configuration
8
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
SFP+ Transceivers
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC SR Data Center Transceiver
JL437A
HPE X130 10G SFP+ LC LRM Data Center Transceiver
JL438A
HPE X130 10G SFP+ LC LR Data Center Transceiver
JL439A
HPE X130 10G SFP+ LC ER 40km Transceiver
JG234A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Campus-Cable
JH693A
HPE X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Campus-Cable
JH694A
HPE X240 10G SFP+ to SFP+ 3m Direct Attach Copper Campus-Cable
JH695A
HPE X240 10G SFP+ to SFP+ 7m Direct Attach Copper Campus-Cable
JH696A
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
Cables
MPO Cables
HPE Multi Fiber Push On to 4 x Lucent Connector 5m Cable
K2Q46A
HPE Multi Fiber Push On to 4 x Lucent Connector 15m Cable
K2Q47A
Internal Power Supplies
System (std 0 // max 2) User Selection (min 1 // max 2) per switch
HPE 58x0AF 650W AC Power Supply
JC680A
• includes 1 x c13, 300w
See Configuration
NOTE:
PDU Cable NA/MEX/TW/JP
JC680A#B2B
• C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW
JC680A#B2C
• C15 PDU Jumper Cord (ROW)
HP 58x0AF 650W DC Power Supply
JC681A
See Configuration
NOTE:1
HPE FlexFabric Switch 650W 48V Hot Plug NEBS-compliant DC Power Supply
JH336A
1, 2
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Configuration
9
See Configuration
NOTE:
Configuration Rules:
Note 1
If 2 power supplies are selected they must be the same SKU number.
Note 2
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) .
(See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the
Defaulted Power Cable option on the Switches/Routers.
Remarks:
Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord
Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cor
BTO and Box Level CTO)
Switch Options
Fan Trays
System (std 0 // max 2) User Selection (min 2 // max 2) per switch
HPE 5920AF 24XG Back (Power Side) to Front (Port Side) Airflow Fan Tray
JG297A
See Configuration
NOTE:
HPE 5920AF 24XG Front (Port Side) to Back (Power Side) Airflow Fan Tray
JG298A
See Configuration
NOTE:
Configuration Rules:
Note 1
The Fan Trays selected must be the same SKU number.
Remarks:
Watson Blue Text:
If there is any empty space below the switch in a rack when using Back to Front Fan Trays,
JG297A, the rack will receive an Air Plenum kit that takes up 1U of additional space in the
rack. The Air Plenum kit is not required on fully configured r
Rack Level Integration. The Air Plenum Kit is a non
automatically for CTO Factory Rack Level Integration.
1
- #B2B in North America, Mexico,
d - Localized Option (Watson Default for
1
acks. This only applies for CTO
-saleable SKU, and is brought in
1
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Technical Specifications
10
HPE FlexFabric 5920AF 24XG Switch (JG296A)
I/O ports and slots
24 fixed 1000/10000 SFP+ ports
Additional ports and
slots
1 RJ-45 serial console port
Power supplies
2 power supply slots
1 minimum power supply required (ordered separately)
Fan tray
2 fan tray slots
direction airflow fan trays to function properly. The system should not be operated with only
113°F (45°C). Failure to comply with these operating requirements may void the product warranty.
Physical characteristics
Dimensions
1.72(h) x 17.32(w) x 27.56(d) x in (4.36 x 44.0 x 70.0 x cm) (1U height)
Weight
28.66 lb (13 kg)
Memory and processor
256 MB flash; Packet buffer size: 3.6 GB, 2 GB SDRAM
Performance
Latency
Throughput
up to 367 Mpps
Routing/Switching
capacity
480 Gbps
Routing table size
16000 entries (IPv4)
MAC address table size
128000 entries
Environment
Operating temperature
32°F to 113°F (0°C to 45°C)
Operating relative
humidity
10% to 90%, noncondensing
Nonoperating/Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
5% to 95%, noncondensing
Acoustic
Low-speed fan: 62.1 dB, High-speed fan: 76.7 dB
Electrical characteristics
Maximum heat
dissipation
1249 BTU/hr (1317.7 kJ/hr)
Voltage
100 - 240 VAC, rated
(depending on power supply chosen)
Idle power
343 W
Maximum power rating
366 W
Frequency
50/60 Hz
Notes
Idle power is the actual power consumption of the device with no ports
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
Subchapter J; NOM; ROHS Compliance
1 RJ-45 out-of-band management port
The customer must order fan trays, as fan trays are not included with the switch. This system requires
two sameone fan tray for more than 24 hours. The system should not be operated without a fan tray more than
two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to
< 1.7 µs (64-byte packets)
-40 to -60 VDC, rated
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Technical Specifications
11
Emissions
VCCI Class A
FCC (CFR 47, Part 15) Class A
Immunity
Generic
ETSI EN 300 386 V1.3.3
EN
EN 55024:1998+ A1:2001 + A2:2003
ESD
EN 61000-4-2; IEC 61000-4-2
Radiated
EN 61000-4-3; IEC 61000-4-3
EFT/Burst
EN 61000-4-4; IEC 61000-4-4
Surge
EN 61000-4-5; IEC 61000-4-5
Conducted
EN 61000-4-6; IEC 61000-4-6
Power frequency
magnetic field
EN 61000-4-8; IEC 61000-4-8
Voltage dips and
EN 61000-4-11; IEC 61000-4-11
Harmonics
EN 61000-3-2, IEC 61000-3-2
Flicker
EN 61000-3-3, IEC 61000-3-3
Management
IMC - Intelligent Management Center; Command-line interface; Out-of-band management; SNMP
manager; Telnet; FTP
Notes
The customer must order a power supply, as the device does not come with a PSU. At least one
JC680A or JC681A is required.
Services
Refer to the Hewlett Packard Enterprise sales website at http://www.hpe.com/networking/services
response times in your area, please contact your local Hewlett Packard Enterprise sales office.
Standards and protocols (applies to all products in series)
BGP
RFC 1163 Border Gateway Protocol (BGP)
RFC 4760 Multiprotocol Extensions for BGP-4
Device Management
RFC 1157 SNMPv1/v2c
Multiple Configuration Files
EN 55022 Class A
ICES-003 Class A
ANSI C63.4 2003
AS/NZS CISPR 22 Class A
EN 61000-3-2:2006
EN 61000-3-3:1995 +A1:2001+A2:2005
EMC Directive 2004/108/EC
interruptions
for details on the service-level descriptions and product numbers. For details about services and
RFC 1771 BGPv4
RFC 1997 BGP Communities Attribute
RFC 2918 Route Refresh Capability
RFC 3392 Capabilities Advertisement with BGP-4
RFC 4271 A Border Gateway Protocol 4 (BGP-4)
RFC 4360 BGP Extended Communities Attribute
RFC 4456 BGP Route Reflection: An Alternative to Full Mesh Internal BGP (IBGP)
RFC 1305 NTPv3
RFC 1591 DNS (client)
RFC 1902 (SNMPv2)
RFC 1908 (SNMP v1/2 Coexistence)
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2, V3)
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Technical Specifications
12
Multiple Software Images
TACACS/TACACS+
General Protocols
IEEE 802.1D MAC Bridges
RFC 4253 The Secure Shell (SSH) Transport Layer Protocol
SSHv1/SSHv2 Secure Shell
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3ag Ethernet OAM
IEEE 802.3ah Ethernet in First Mile over Point to Point Fiber - EFMF
IEEE 802.3x Flow Control
RFC 768 UDP
RFC 783 TFTP Protocol (revision 2)
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 826 ARP
RFC 854 TELNET
RFC 856 TELNET
RFC 868 Time Protocol
RFC 896 Congestion Control in IP/TCP Internetworks
RFC 903 RARP
RFC 950 Internet Standard Subnetting Procedure
RFC 959 File Transfer Protocol (FTP)
RFC 1058 RIPv1
RFC 1091 Telnet Terminal-Type Option
RFC 1141 Incremental updating of the Internet checksum
RFC 1142 OSI IS-IS Intra-domain Routing Protocol
RFC 1191 Path MTU discovery
RFC 1213 Management Information Base for Network Management of TCP/IP-based internets
RFC 1253 (OSPF v2)
RFC 1350 TFTP Protocol (revision 2)
RFC 1531 Dynamic Host Configuration Protocol
RFC 1533 DHCP Options and BOOTP Vendor Extensions
RFC 1534 DHCP/BOOTP Interoperation
RFC 1541 DHCP
RFC 1591 DNS (client only)
RFC 1624 Incremental Internet Checksum
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2453 RIPv2
RFC 2581 TCP Congestion Control
RFC 2644 Directed Broadcast Control
RFC 3046 DHCP Relay Agent Information Option
RFC 3768 Virtual Router Redundancy Protocol (VRRP)
RFC 4250 The Secure Shell (SSH) Protocol Assigned Numbers
RFC 4251 The Secure Shell (SSH) Protocol Architecture
RFC 4252 The Secure Shell (SSH) Authentication Protocol
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Technical Specifications
13
RFC 4254 The Secure Shell (SSH) Connection Protocol
RFC 4941 Privacy Extensions for Stateless Address Autoconfiguration in IPv6
IPv6
RFC 2080 RIPng for IPv6
RFC 5095 Deprecation of Type 0 Routing Headers in IPv6
MIBs
RFC 1213 MIB II
LLDP-MIB
Network Management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
SNMPv1/v2c/v3
OSPF
RFC 1587 OSPF NSSA
RFC 5340 OSPFv3 for IPv6
QoS/CoS
IEEE 802.1p (CoS)
RFC 4364 BGP/MPLS IP Virtual Private Networks (VPNs)
RFC 4419 Diffie-Hellman Group Exchange for the Secure Shell (SSH) Transport Layer Protocol
RFC 4594 Configuration Guidelines for DiffServ Service Classes
RFC 2460 IPv6 Specification
RFC 2711 IPv6 Router Alert Option
RFC 2740 OSPFv3 for IPv6
RFC 3315 DHCPv6 (client only)
RFC 4291 IP Version 6 Addressing Architecture
RFC 4862 IPv6 Stateless Address Auto-configuration
RFC 1907 SNMPv2 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
LLDP-EXT-DOT1-MIB
LLDP-EXT-DOT3-MIB
IEEE 802.1D (STP)
RFC 3164 BSD syslog Protocol
RFC 3176 sFlow
RFC 2328 OSPFv2
RFC 3101 OSPF NSSA
RFC 3137 OSPF Stub Router Advertisement
RFC 3623 Graceful OSPF Restart
RFC 4577 OSPF as the Provider/Customer Edge Protocol for BGP/MPLS IP Virtual Private Networks
(VPNs)
RFC 4811 OSPF Out-of-Band LSDB Resynchronization
RFC 4812 OSPF Restart Signaling
RFC 4813 OSPF Link-Local Signaling
RFC 1349 Type of Service in the Internet Protocol Suite
RFC 2474 DiffServ Precedence, including 8 queues/port
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 3168 The Addition of Explicit Congestion Notification (ECN) to IP
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Technical Specifications
14
RFC 3247 Supplemental Information for the New Definition of the EF PHB (Expedited Forwarding Per-
Ingress Rate Limiting
Security
IEEE 802.1X Port Based Network Access Control
SSHv1/SSHv2 Secure Shell
Hop Behavior)
RFC 3260 New Terminology and Clarifications for DiffServ
RFC 1492 TACACS+
Access Control Lists (ACLs)
Guest VLAN for 802.1X
Port Security
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Accessories
15
HPE FlexFabric 5920 Switch Series accessories
Transceivers
HPE X125 1G SFP LC LH40 1310nm Transceiver
JD061A
HPE X120 1G SFP LC LH40 1550nm Transceiver
JD062A
HPE X125 1G SFP LC LH70 Transceiver
JD063B
HPE X120 1G SFP LC BX 10-U Transceiver
JD098B
HPE X120 1G SFP LC BX 10-D Transceiver
JD099B
HPE X120 1G SFP LC SX Transceiver
JD118B
HPE X120 1G SFP LC LX Transceiver
JD119B
HPE X120 1G SFP RJ45 T Transceiver
JD089B
HPE X130 10G SFP+ LC SR Transceiver
JD092B
HPE X130 10G SFP+ LC LRM Transceiver
JD093B
HPE X130 10G SFP+ LC LR Transceiver
JD094B
HPE X130 10G SFP+ LC ER 40km Transceiver
JG234A
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
Power Supply
HPE 58x0AF 650W AC Power Supply
JC680A
HP 58x0AF 650W DC Power Supply
JC681A
Fan Tray
HPE 5920AF 24XG Back (Power Side) to Front (Port Side) Airflow Fan Tray
JG297A
HPE 5920AF 24XG Front (Port Side) to Back (Power Side) Airflow Fan Tray
JG298A
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Accessory Product Details
16
NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.
HPE X125 1G SFP LC
LH40 1310nm
Transceiver
A small form
pluggable SFP Gigabit
LH40 transceiver that
provides a full duplex
Gigabit solution up to
40km on a single
fiber.
Ports
1 LC 1000Base-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single
Maximum distance:
Fiber type
Single Mode
Services
Refer to the Hewlett Packard Enterprise sales website
at
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.
HPE X120 1G SFP LC
LH40 1550nm
Transceiver
A small form
pluggable (SFP) Gigabit
LH40 transceiver that
provides a full
Gigabit solution up to 40
km on a single mode fiber.
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC
Wavelength
1550 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
Single
Maximum distance:
Fiber type
Single Mode
Services
Refer to the Hewlett Packard Enterprise sales website
at
level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett
Enterprise sales office.
(JD061A)
-factor
-mode
(JD062A)
-factor
-mode fiber optic, complying with ITU-T G.652;
• 40km distance
http://www.hpe.com/networking/services for details on the service-
-duplex
-mode fiber optic, complying with ITU-T G.652;
• 40km distance
http://www.hpe.com/networking/services for details on the service-
Packard
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Accessory Product Details
17
HPE X125 1G SFP LC
Ports
1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics)
Connectivity
Connector type
LC Wavelength
1550 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
• 70km
Fiber type
Single Mode
Services
Refer to the Hewlett Packard Enterprise sales website
Enterprise sales office.
HPE X120 1G SFP LC SX
Ports
1 LC 1000BASE-SX port
Connectivity
Connector type
LC
Wavelength
850 nm
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Maximum distance:
• OM3 = Not Specified by standard
Cable length
up to 550m
Fiber type
Multi Mode
Services
Refer to the Hewlett Packard Enterprise sales website
Enterprise sales office.
HPE X120 1G SFP LC LX
Ports
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connectivity
Connector type
LC
Wavelength
1300 nm
LH70 Transceiver
(JD063B)
A small form-factor
pluggable (SFP) Gigabit
LH70 transceiver that
provides a full-duplex
Gigabit solution up to
70km on a single-mode
fiber.
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
at http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Transceiver (JD118B)
A small form-factor
pluggable (SFP) Gigabit
SX transceiver that
provides a full-duplex
Gigabit solution up to
550m on a Multimode
fiber.
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
at http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Transceiver (JD119B)
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Accessory Product Details
18
A small form-factor
Physical characteristics
Dimensions
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x
1.17 cm)
Full configuration weight
0.04 lb. (0.02 kg)
Electrical characteristics
Power consumption
typical
0.8 W
Power consumption
maximum
1.0 W
Cabling
Cable type:
• 10km for Singlemode
Fiber type
Both
Services
Refer to the Hewlett Packard Enterprise sales website
Enterprise sales office.
HPE X120 1G
Ports
1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T)
Connectivity
Connector type
RJ-45
Physical
Dimensions
2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4
cm)
Full configuration weight
0.07 lb. (0.03 kg)
Electrical
Power consumption typical
0.8 W
Power consumption maximum
1.0 W
Cabling
Cable type:
• 100m
Services
Refer to the Hewlett Packard Enterprise sales website
contact your local Hewlett Packard Enterprise sales office.
pluggable (SFP) Gigabig
LX transceiver that
provides a full duplex
Gigabit solution up to
550m on MMF or 10Km
on SMF
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
at http://www.hpe.com/networking/services for details on the servicelevel descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
SFP RJ45 T
Transceiver
(JD089B)
A small form
factor pluggable
(SFP) Gigabit
1000Base-T
transceiver that
provides a full
duplex Gigabit
solution up to
100m on a Cat5+ cable.
characteristics
characteristics
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair unshielded
twisted pair (UTP) or shielded twisted pair (STP) balanced, complying with IEEE 802.3ab
1000BASE-T;
Maximum distance:
at http://www.hpe.com/networking/services for details on the service-level descriptions
and product numbers. For details about services and response times in your area, please
Page
QuickSpecs
HPE FlexFabric 5920 Switch Series
Summary of Changes
19
Date
Version History
Action
Description of Change
07-May-2018
Version 20
Changed
Configuration Section updated
25-Sep-2017
Version 19
Changed
Configuration section updated
27-May-2016
Version 18
Changed
Document name updated to HPE FlexFabric 5920 Switch
Product description updated.
08-Jan-2016
Version 17
Changed
Warranty and support updated
12-Oct-2015
Version 16
Added
Added new DC power supply: JH336A
07-Apr-2015
Version 15
Changed
Product image changed, Configuration and Technical
Specifications updated
19-Mar-2014
Version 14
Changed
Transceivers and Fan Trays were revised in Configuration.
08-Nov-2013
Version 12
Changed
Box Level Integration CTO Models, Rack Level Integrated
were revised in Configuration.
10-Jun-2013
Version 11
Changed
Updated notes section for Box Level Integration CTO
Models and Rack Level Integration CTO Models.
19-Mar-2013
Version 10
Changed
Corrected the new Configuration section.
27-Feb-2013
Version 9
Changed
The formatting of the new Configuration section was
revised.
19-Feb-2013
Version 8
Added
The configuration section was added. Line art was added.
Changed
Product overview, Features and benefits, Model
specifications, and Accessories were revised.
31-Dec-2012
Version 6
Changed
Updated Features and Benefits.
19-Dec-2012
Version 5
Changed
Updated the Flash Memory.
04-Dec-2012
Version 4
Changed
Updated Features and Benefits and made minor updates
to the model specifications and accessories.
06-Jul-2012
Version 3
Changed
Changes made in the Technical Specifications section.
02-Apr-2012
Version 2
Changed
Part number was revised.
26-Mar-2012
Version 1
Created
Document creation
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such pro
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
To learn more, visit:
c04111528
Series.
CTO Models, Internal Power Supplies, and Switch Options
http://www.hpe.com/networking
- 14260 - Worldwide - V20 - 7-May-2018
ducts and services.
Page
Loading...