o Smart Forensics enables two-click drill down for accurate threat detection/analysis, physical location tracking,
and audit trails of system/admin actions
o supported only on RF Manager v6.0 and later
Technical features
Wireless IDS/IPS features
o accurately autoclassifies APs and client devices using patented autoclassification techniques to block genuine
threats
o automatically prevents denial-of-service attacks and more than 20 threats simultaneously from a single sensor
while continuing to scan for threats
o pinpoints the physical location of vulnerable or threat-posing devices
o blocks unauthorized traffic without network disruption
o detects and locates non-WiFi interference and RF jamming
Protection against rogue IEEE 802.11a/b/g/n access points and wireless networks
leverages the HP MSM415 sensor to provide 24x7 security detection and prevention capabilities for the wireless network
WEP cracking and impersonation attacks
protect against active WEP cracking and impersonation attacks
Identification of performance problems
occurs proactively before impact to end users; categorizes the potential source, such as configuration issues (specifically
incorrect channel allocation, sub-optimal IEEE 802.11n protocol settings), bandwidth (poor utilization, low average, data
rate, excessive overhead), and RF (non-WiFi interference, channel crowding)
Integration with HP MSM Controller
reduces administration time and effort through automatic synchronizing of authorized APs and clients with MSM
controllers
Central management of security policies
gives administrators the flexibility to customize wireless security policies with site-specific guidelines
Out-of-the-box and custom reports
emailed hourly, daily, or at custom-defined intervals, these reports help to ensure that administrators always have the
essential information they need to manage the network effectively
Automated regulatory compliance reporting
o simplifies performing internal and regulatory audits with easy-to-use auditing and reporting tools
o predefined reports map wireless vulnerabilities to specific data security compliance standards, such as PCI,
Sarbanes-Oxley (SOX), HIPAA, Gramm-Leach-Bliley (GLBA), and DoD Directive 8100.2
o on-wire/off-wire classification filters neighboring devices from the reports, eliminating the guesswork and time
needed to validate vulnerability scans
Roles-based administrative rights
provide the proper levels of security and management access over the network and the RF Manager Controller
management interface
Location-based policy management
simplifies the security and administration of a distributed WLAN deployment through granular, customizable policies
localized on a site-by-site, region-by-region or even floor-by-floor basis.
Offline sensor operation
o provides full security coverage (detection, classification, and prevention) even when there is no connectivity
between the sensor and the RF Manager
o raises alerts/events, stores them, and synchronizes them with the RF Manager on reconnection
Integration with HP RF Planner
allows importing of planning and device placement information from HP RF Planner
Warranty and support
Limited Lifetime Warranty v2.0
advance hardware replacement with next-business-day delivery (available in most countries). See
www.hp.com/networking/warrantysummary for duration details.
have older product names and model numbers that differ from current models.