HPE J9150A Getting Started Guide

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP X132 10G SFP+ LC SR Transceiver
Overview
Models
HP X132 10G SFP+ LC SR Transceiver
J9150A
Key features
10GbE Transmission rate - SFP+ form factor Transmissions up to 400m on OM4, 300m on OM3 0-70C Hot pluggable Diagnostic monitoring interface for optical xcvrs
A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 400 m on OM4 multimode fiber.
DA - 14372 Worldwide — Version 2 — June 10, 2013
Page 1
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Technical Specifications
HP X132 10G SFP+ LC SR Transceiver
(J9150A)
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics
Cabling
Notes
Services
HP X132 10G SFP+ LC SR Transceiver
1 LC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR); Duplex: full only
Connector type
Wavelength
Dimensions
Weight
Transceiver form factor
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Power consumption typical
Power consumption maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low metal content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively; Maximum distance:
• 2-26m with 62.5 µm multimode cable @ 160 MHz*km
• 2-33m with 62.5 µm multimode cable @ 200 MHz*km
• 2-66m with 50 µm multimode cable @ 400 MHz*km
• 2-82m with 50 µm multimode cable @ 500 MHz*km
• 2-300m with 50 µm multimode cable @ 2000 MHz*km
• 2-400m with 50 µm multimode cable @ 4700 MHz*km
Cable length
Fiber type
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at: the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.
LC
850 nm
0.54(w) x 2.19(d) x 0.47(h) in (1.38 x 5.57 x 1.19 cm)
0.04 lb (0.02 kg)
SFP+
32°F to 158°F (0°C to 70°C)
0% to 85%, noncondensing
-40°F to 185°F (-40°C to 85°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
0.6 W
0.8 W
2-400m
Multi Mode
www.hp.com/networking/services
for details on
DA - 14372 Worldwide — Version 2 — June 10, 2013
Page 2
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Technical Specifications
HP X132 10G SFP+ LC SR Transceiver accessories
Cables
HP 0.5 m Multimode OM3 LC/LC Optical Cable HP 1 m Multimode OM3 LC/LC Optical Cable HP 2 m Multimode OM3 LC/LC Optical Cable HP 5 m Multimode OM3 LC/LC Optical Cable HP 15 m Multimode OM3 LC/LC Optical Cable HP 30 m Multimode OM3 LC/LC Optical Cable HP 50 m Multimode OM3 LC/LC Optical Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
To learn more, visit
www.hp.com/networking
HP X132 10G SFP+ LC SR Transceiver
AJ833A AJ834A AJ835A AJ836A AJ837A AJ838A
AJ839A QK732A QK733A QK734A QK735A QK736A QK737A
© Copyright 2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 14372 Worldwide — Version 2 — June 10, 2013
Page 3
Loading...