HPE J9443A, J8696A Getting Started Guide
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP RPS1600 Redundant Power System
Overview
Models
HP RPS1600 Redundant Power System
JG136A
Product overview
A-RPS1600 is a redundancy power supply which can support up to 8 active devices and up to 3200W power per system, 1400W power
per port to A series fixed port switches.
Key features
A cost effective power redundancy solution
A full 48 port PoE/PoE+ power redundancy solution
Support up to 8 active devices at the same time
Provide 3200W power per system and 1400W per port
DA - 14371 Worldwide — Version 2 — May 24, 2012
Page 1
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Technical Specifications
HP RPS1600 Redundant Power System (JG136A)
Ports
Physical
characteristics
Environment
Electrical characteristics
Safety
Services
8 redundant power supply ports
Restrictions: two -56V/25A DC(PoE); six -56V/8A DC(non-PoE)
Dimensions
Weight
Full configuration weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Voltage
Current
Idle power
Maximum power rating
RPS power
PoE power
RPS
PoE
Frequency
Notes
CE Labeled; UL 60950-1; IEC 60950-1; ICES-003; FCC Part 15, Subpart B; EU RoHS Compliant; EN 609501/A11; C-Tick; VCCI Class A; ROHS Compliance; EN 300386
Refer to the HP website at
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
HP RPS1600 Redundant Power System
17.32(w) x 15.63(d) x 1.74(h) in (44 x 39.7 x 4.42 cm)
14.11 lb (6.4 kg)
16.75 lb (7.6 kg)
14°F to 122°F (-10°C to 50°C)
5% to 95%
-40°F to 158°F (-40°C to 70°C)
5% to 95%
up to 13,123 ft (4 km)
Pressure: 53 dB; ISO 7779, ISO 9296
100-120/200-240 VAC
30/60 A
38 W
3550 W
3200 W
2800 W
-55 V
-55 V
50/60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
With one RPS1600 Power Supply, the PRS1600 Redundant Power System can
provide 1600W power output; With two PRS1600 Power Supplies, the output
power is 3200W.
www.hp.com/networking/services
for details on the service-level descriptions
DA - 14371 Worldwide — Version 2 — May 24, 2012
Page 2
Loading...