The HPE ProLiant ML30 Gen10 Server is a powerful yet affordable tower server designed for small offices, remote and branch offices
to run on
ity at a
lower cost.
4 LFF Model
8 SFF Model
Front View (details for 4LFF and 8SFF)
1.
Four (4) LFF or Eight (8) SAS/SATA HDD cage
5.
USB 2.0 port
2.
Media drive bay 2 (blank shown)
6.
Power On/Standby button and system power LED
3.
Media drive bay 1 (optional slim-line DVD shown)
7.
Health LED
4.
USB 3.0 port
-premises and hybrid cloud solutions, delivering enterprise-class performance, security, reliability, and expandabil
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Overview
2
Rear View
1.
PCI slots (slots 1-4)
7.
Power supply power connector
2.
Dedicated iLO management port (optional)
8.
Power cord clip
3.
Four (4) USB 3.0 ports
9.
Padlock eye
4.
VGA port
10.
Kensington security slot
5.
Serial port (optional)
11.
NIC1/shared iLO port (upper), NIC2 port (lower)
6.
Power supply bay (one optional redundant power supply
with enablement kit and blank shown)
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Overview
3
Internal View
1.
System fan
7.
One (1) internal USB 3.0 port
2.
Power supply
8.
Six (6) SATA ports
3.
One (1) processor and heatsink/fan
9.
One (1) M.2 slot (optional module shown)
4.
Four (4) DDR4 DIMM slots
10.
TPM connector
5.
Bezel lock
11.
Four (4) PCIe expansion slots
6.
Front PCI fan (optional or included, depending on models)
What’s New
•
•
•
•
•
•
•
for you
http://www.hpe.com/servers/clearos
Supports Intel® Xeon® E processors up to 6 cores and up to 80W, 8th Core™ i3 and Pentium® G processors.
2666 MT/s HPE DDR4 Standard Memory UDIMM offering 8GB, 16GB. Max 64GB memory capacity. Four expansion slots for more flexible usage - two x16 and two x8 connectors. Onboard M.2 NVMe SSD support.Dedicated iLO port & serial port option kit. SMB Offering to match different workloads. ClearOS, an easy to use OS with an application marketplace, allows you to build a fully functional server that is just right
at no upfront cost. To learn more on what you can do, please visit
.
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Overview
4
Platform Information
Form Factor
NOTE: Sliding Shelf - 874578-B21 is optional to support rack form factor.
Chassis Types
2 LFF NHP HDD
cage kits
System Fans
B21) which is included in SMB Performance
2. Must be selected in 4LFF NHP CTO Server and SMB Entry Model if M.2 SSD or any PCIe card (NIC, Smart Array Controller,
graphic card, etc.) is selected except 1Gb network adapters.
4U Tower
8 SFF chassis and 2 half-height (5.25”) media drive bays with optional 1 slim-line DVD bay kit option
4 LFF chassis and 2 half-height (5.25”) media drive bays with optional 1 slim-line DVD bay kit option
4 LFF NHP chassis and 2 half-height (5.25”) media drive bays with optional 1 slim-line DVD bay kit option or up to
1 Default system fan module (92 x 32 mm)
1 Default PCI fan module (92 x 32 mm) depending on models
NOTE: PCI fan module is part of HPE ML30 Gen10 PCI Fan and Baffle Kit (P06303and Solution Models.
NOTE: HPE ML30 Gen10 PCI Fan and Baffle Kit (P06303-B21) is required as follows:
1. Must be selected in 4LFF Hot Plug CTO Server and 8SFF Hot Plug CTO Server.
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Standard Features
5
Processor
effectiveness.
NOTE:
http://www.intel.com/xeon.
SGX
Xeon E-2176G
3.7 GHz
6
12 MB
80W
2666 MT/s
Yes
Xeon E-2174G
3.8 GHz
4
8 MB
71W
2666 MT/s
Yes
Xeon E-2144G
3.6 GHz
4
8 MB
71W
2666 MT/s
No
Xeon E-2136
3.3 GHz
6
12 MB
80W
2666 MT/s
No
Xeon E-2134
3.5 GHz
4
8 MB
71W
2666 MT/s
No
Xeon E-2126G
3.3 GHz
6
12 MB
80W
2666 MT/s
No
Xeon E-2124
3.3 GHz
4
8 MB
71W
2666 MT/s
No
Core i3-8300
3.7 GHz
4
8 MB
62W
2400 MT/s
No
Pentium G5400
3.7 GHz
2
4 MB
58W
2400 MT/s
No
Chipset
On System Management Chipset
NOTE: Read and learn more in the HPE iLO QuickSpecs.
Memory
Type:
HPE DDR4 Standard Memory, Unbuffered (UDIMM)
DIMM Slots Available
4
4 DIMMs (2 Channels/ 2 DIMMs per channel)
Maximum Capacity (UDIMM)
64GB
(4 x 16GB UDIMM @2666 MT/s)
NOTE: The maximum memory speed depends on processor model.
Memory Protection
Network Controller
Intel® Xeon® E Processor is designed to deliver the best combination of performance, built-in capabilities, and costThis product also supports Intel® Pentium® and Intel® Core™ i3 processors.
Choose one of the following processors based on the model:
For more information regarding Intel Xeon processors, please see the following
ModelCPU FrequencyCoresL3 CachePowerDDR4
Intel® C246 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/
The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed
HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional controller
SR Gen10 SW RAID is off by default and must be enabled. For enabling please
source software to
NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.
Internal Storage Devices
Optical Drives
None ship standard
Optional: SATA 9.5mm DVD-RW/DVD-ROM Optical Drive
Hard Drives
None ship standard
Bus Width indicates the number of physical electrical lanes running to the connector.
breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet.
Software RAID
HPE Smart Array Gen10 SW RAID
NOTE:
will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.
NOTE: For CTO orders, HPE Smart Array S100i
select HPE FIO Enable Smart Array SW RAID (784308-B21).
NOTE: For BTO orders, HPE Smart Array S100i SR Gen10 SW RAID is on by default.
NOTE: The S100i supports 4 SATA ports for drive cage and additional 2 SATA ports for drives from media drive bays.
NOTE: The S100i only supports Windows. For Linux users, HPE offers a solution that uses in-distro open-
create a two-disk RAID 1 boot volume. For more information visit:
HPE Smart Array E208i-p SR Gen10 Controller
HPE Smart Array E208e-p SR Gen10 Controller
Performance RAID Controller
HPE Smart Array P408i-p SR Gen10 Controller
HPE Smart Array P408e-p SR Gen10 Controller
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Standard Features
7
Maximum Internal Storage
Capacity
Configuration
Hot Plug LFF SAS
48 TB
4 x 12 TB
Hot Plug LFF SATA
48 TB
4 x 12 TB
Hot Plug SFF SAS
19.2 TB
8 x 2.4 TB
Hot Plug SFF SATA
16 TB
8 x 2 TB
Non Hot Plug LFF SATA
24 TB
4 x 4 TB + 2 x 4 TB (with additional optional LFF drive enablement kits)
Hot Plug LFF SATA SSD
7.68 TB
4 x 1.92 TB
Hot Plug SFF SAS SSD
3.2 TB
8 x 400 GB
Hot Plug SFF SATA SSD
61.44 TB
8 x 7.68 TB
M.2 NVMe SSD
480 GB
1 x 480 GB
NOTE: M.2 SSD is applicable to all models.
Power Supply
cost options for customers trying to balance their need for enterprise class efficiency
Level power supply options have been designed
redundant AC power supply option for most HPE ProLiant Gen10 Essential
series tower
ess
efficiency operation and
is flexibility
a
For information on power specifications and technical content visit HPE Server power supplies.
Interfaces
VGA Port
1 standard (rear)
Serial Port
1 optional (rear)
Network Port (RJ-45)
2 x 1 Gb ports as standard (rear, 1 shared for HPE iLO)
Dedicated iLO Management Port (RJ-45)
1 optional (rear)
USB 3.0 Port
6 (1 front, 4 rear, 1 internal)
USB 2.0 Port
1 (1 front)
HPE 350W E-star 1.0 Power Supply FIO Kit
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Redundant Power Supply
NOTE: Available in 94% efficiency.
HPE Entry-Level Power Supplies provide lowerand reliability while maintaining lowest possible hardware costs. All Entryspecifically for HPE ProLiant Gen10 Essential Series servers.
The HPE 350W FIO Power Supply is the standard, nonservers. It features Bronze-level (85%) certified power efficiency with a set of features optimized for the Gen10 Essentialservers.
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-l
installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for highoffer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. Th
helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
All pre-configured servers ship standard with one or more country-specific 6 ft/1.83m C-13 power cords depending on regions. If
different power cord is required, please check the HPE Power Cords and Cables web page.
To review the power requirements for your selected system, please use the HPE Power Advisor Tool.
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Standard Features
8
Operating Systems and Virtualization Software Support for ProLiant Servers
premise solutions without sacrificing security and ease of use. HPE
based graphical user
premise, and an Application Marketplace with over 100 apps and growing.
testing and enablement applicable to
For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and Virtualization
Microsoft Windows Server 2016
Red Hat Enterprise Linux (RHEL) 7.5
SUSE Linux Enterprise Server (SLES) 12 SP3 and 15
VMware ESXi 6.5 U2 and 6.7
NOTE: VMware supported only with Intel® Xeon® E processors, not supported with Intel® Core™ or Pentium® processors.
ClearOS
HPE and ClearCenter will help you lower the cost of building onProLiant servers with ClearOS give you a simple, secure, and affordable operating system with an intuitive webinterface that provides a cloud-like experience onWhether you’re starting out or scaling, you decide what applications you need and pay as you grow.
NOTE:ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. For more information on
NOTE: CentOS not directly supported / Community Supported (Based on RHEL so RHEL
CentOS) CentOS 7.5.
NOTE:
Software and latest listing of software drivers available for your server.
ACPI 6.1 Compliant
PCIe 3.0 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
VGA Port
USB 3.0 Compliant
USB 2.0 Compliant
SMBIOS 3.1
UEFI 2.6
ASHRAE A3/A4
NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit:
configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Cla
2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROMinformation, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot and Secure Start enable for enhanced security
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant
• PXE boot support for IPv6 networks
• Workload Profiles for simple performance optimization
UEFI Boot Mode only:
• TPM 2.0 Support
• iSCSI Software Initiator Support.
• HTTP/HTTPs Boot support as a PXE alternative.
• Boot support for option cards that only support a UEFI option ROM
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI.
NOTE: Legacy FIO Setting (758959-
HPE Integrated Lights-Out (HPE iLO)
Monitor your servers for ongoing management,
at
.
Configure and boot your servers securely with industry standard Unified Extensible Firmware
at http://www.hpe.com/servers/uefi.
Hassle free server and OS provisioning for 1 or few servers with Intelligent Provisioning. Learn more at
iLO RESTful API is Redfish API conformance and offers simplified server management
maintenance tasks based on modern industry standards. Learn more at
.
Page
QuickSpecs
HPE ProLiant ML30 Gen10 Server
Standard Features
10
Server Utilities
Active Health System
mponent of the iLO management portfolio that provides continuous,
http://www.hpe.com/servers/ahs
Active Health System Viewer
Smart Update
Keep your servers up to date with the HPE Smart Update solution by using Smart Update Manager (SUM) to optimize the firmware
and driver updates of the Service Pack for ProLiant (SPP). Learn more at http://www.hpe.com/info/smartupdate.
iLO Amplifier Pack
e,
ower to discover, inventory and update Gen8, Gen9 and Gen10 HPE
servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more
at http://www.hpe.com/servers/iLOamplifierpack.
HPE iLO Mobile Application
s.
For additional information please visit: http://www.hpe.com/info/ilo/mobileapp.
RESTful Interface Tool
to discover and deploy servers at scale. Learn more
at http://www.hpe.com/info/resttool.
Scripting Tools
Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or
http://www.hpe.com/servers/stk
http://www.hpe.com/servers/powershell
HPE OneView Standard
nitor
defined
functionality is not available. Learn more at http://www.hpe.com/info/oneview.
HPE Systems Insight Manager (HPE SIM)
asic
http://www.hpe.com/servers/hpsim
The HPE Active Health System (AHS) is an essential co
proactive health monitoring of HPE servers. Learn more at
Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed problem resolution with HPE selfrepair recommendations, to learn more visit: http://www.hpe.com/servers/ahsv
.
Designed for large enterprise and service provider environments with hundreds of HPE servers, the iLO Amplifier Pack is a fre
downloadable open virtual application (OVA) that delivers the p
.
Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile device
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4
Scripting Tools for Windows PowerShell. Learn more at
or
.
HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting without additional fees. It can mo
multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-
NOTE: HPE OneView Standard support on ML30 Gen10 will begin in early 2019.
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE Integrity Servers, and also provides you with b
support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and seamless firmware updates. Learn more at
.
Page
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.