QuickSpecs
HPE SN4000B SAN Extension Switch
Ov
erview
1
HPE SN4000B SAN Extension Switch
Today’s IT organizations are under pressure to keep pace with the growing avalanche of data traffic between data centers and the
changes driven by virtualized application workloads.
ith rising Service Level Agreement (SLA)
requirements and recovery expectations, enterprise data centers need their disaster recovery plans to enable fast, continuous
easy access to mission
of data quickly, reliably, and simply while minimizing operational and capital expenses.
SN4000B Extension Switch with Brocade Fabric Vision technology delivers unprecedente
and simplified management to handle the unrelenting growth of data traffic betwee
purpose
IT organizations to future
The
implementing disk and tape data protection solutions. The
The
Trunking, Adaptive Rate Limiting,
Networking and Extended Fabric. Optional value
Accelerator are available to address challenging extension and storage networking requirements in open system and ma
environments.
delivering advanced
as the ability to leverage expertise and training across the data center staff.
What's New
Key Features
Maximize the Value of SANs
• Extensive diagnostics, system-monitoring capabilities, and performance monitoring (including extensive and granular TCP
Faced with this challenge, coupled w
-critical data from anywhere in the world. Ultimately, storage administrators want to replicate large amounts
To address this challenge, the HPE
d performance, continuous availability,
n data centers. The HPE SN4000B is a
-built data center extension solution that maximizes performance and scalability for large, complex environments, allowing
-proof their storage extension infrastructure by adding more throughput capacity as their needs grow.
HPE SN4000B Data Center Extension Switch is a robust platform for large scale, multi-site data center environments
HPE SN4000B Data Center Extension Switch is ideal for:
• Data protection for open systems and mainframe
• Multi-site synchronous and asynchronous storage replication
• Centralized tape backup, recovery, and archiving
HPE SN4000B configuration is a bundle including a comprehensive set of advanced services: Fabric Vision, Extension
ISL Trunking, IPsec, Compression, Open Systems Tape Pipelining (OSTP), Fast Write, Adaptive
-add licenses for Integrated Routing, FICON CUP, and Advanced FICON®
The SN4000B SAN Extension Switch is fully compatible with the entire B-Series family of FC switching platforms,
16 Gbit/sec fabric services end-to-end over distance and providing investment protection for hardware as well
, and
inframe
• FCIP Extension of Fibre Channel SANs provides connectivity over longer distances that would otherwise be
technologically not possible, impractical, and too expensive with native Fibre Channel or when dark fiber resources are
unavailable.
• Achieve bandwidth savings and higher bandwidth utilization via data compression by compressing FC frames before they
are encapsulated into FCIP packets.
Page
QuickSpecs
HPE SN4000B SAN Extension Switch
Overview
Page 2
Superior Performance
Outstanding Scalability and operational flexibility
statistics graphing in Webtools).
• TCP acceleration helps to overcome latency between source and target locations by adjusting the TCP window size and
performing selective acknowledgements.
• Advanced Quality of Service (QoS) techniques can be used to prioritize traffic and guarantee that necessary bandwidth
requirements are met.
• Key protocol features are enabled in the FCIP implementation to optimize performance of SAN extension over IP
networks, including Storage-Optimized TCP.
• FCIP Trunking feature allows multiple IP source and destination address pairs (defined as FCIP circuits) to provide high
bandwidth FCIP tunnel and failover resiliency.
• Adaptive Rate Limiting feature meets minimum bandwidth guarantee for each tunnel while allowing full utilization of the
available network bandwidth without adverse impact to throughput performance during high traffic loads.
• Optional FC Routing delivers fabric isolation in conjunction with FCIP, enabling separate fabrics to share devices without
merging across the IP network.
QuickSpecs
HPE SN4000B SAN Extension Switch
Product Highlights
Page 3
SN4000B
n
Switch
, and storage for
Configuration Support
The
directors. For complete interoperability information please check:
• http://www.hp.com/go/SANdesignguide
Simpl
Brocade Fabric Vision technology provides a breakthrough hardware and software solution that helps
simplify monitoring, maximize network availability, and dramatically reduce costs. Featuring innovative
monitoring, management, and diagnost
to avoid problems before they impact operations, helping their organizations meet SLAs. The
SN4000B Extension Switch supports the following Fabric Vision technology features for storage
e
monitoring and alerting tool that proactively monitors storage extension network health based
Hardware Based
Compression
Hardware-based compression delivers the ability to maximize throughput over lower bandwidth links in
the wide area
multiple modes to optimize compression ratios for various throughput requirements.
IPSec
mix of secure and non
connections.
SAN Extensio
• 24 Fibre Channel ports with link speeds of 4, 8, and 16 Gbps, compatible with short
wavelength (SWL), long wavelength (LWL) and extended long wavelength (ELWL) SFP+
transceivers
• Sixteen 1 GbE/10 GbE ports, compatible with copper, ultra short reach (USR), short reach (SR)
and long reach (LR) SFP/SFP+ transceivers
• Two 40 GbE ports, compatible with short reach (SR) and long reach (LR) QSFP transceivers
• Rack-mountable 2U chassis
• One RJ-45 Ethernet management port with 10/100/1000 Mbps auto negotiating capability
• One USB port that provides storage for firmware updates, switch support data
configuration uploads and downloads
HPE SN4000B SAN Extension Switch is fully compatible with the B-series FC switches and
• http://www.hp.com/go/SANdesign
ified Management
ic capabilities, Fabric Vision technology enables administrators
xtension management:
• Monitoring and Alerting Policy Suite (MAPS): Provides a pre-built, policy-based threshold
on a comprehensive set of metrics at tunnel, circuit, and QoS layers. Administrators can
configure multiple fabrics at one time using pre-defined or customized rules and policies for
specific ports or switch elements.
• Fabric Performance Impact (FPI) Monitoring: Uses pre-defined thresholds and alerts in
conjunction with MAPS to automatically detect and alert administrators to severe levels of
latency and identifies slow drain devices that might impact the network. This feature uses
advanced monitoring capabilities and intuitive MAPS dashboard reporting to indicate various
latency severity levels, pinpointing exactly which devices are causing or impacted by a
bottlenecked port.
• Dashboards: Provides integrated dashboards that display an overall SAN health view, along
with details on out-of-range conditions, to help administrators easily identify trends and
quickly pinpoint issues occurring on a switch or in a fabric.
HPE
network, optimizing the cost efficiencies of FCIP. The SN4000B Extension Provides
The HPE SN4000B SAN Extension Switch IPSec function is capable of supporting both Ipv4 and Ipv6,
-secure tunnels on the same GE port, jumbo frames, and VLAN tagged
QuickSpecs
HPE SN4000B SAN Extension Switch
Product Highlights
Page 4
Scalability
Refer to the guidelines described in the Heterogeneous Open SAN Design Reference Guide available
at: http://www.hp.com/go/SANdesignguide
Cabinet Support
HPE
42U, and 47U) 11000 G2 Series racks.
NOTE: To order factory integration, add 0D1 after the part number on your sales order.
Software Components, Standard
Fabric Vision
Fabric Vision offers innovative diagnostic, monitoring and management capabilities to help accelerate
new application deployments, address SAN problem
operational costs. It Includes
on: A comprehensive tool that enables administrators to identify, monitor, and analyze
Fabric Vision will be included by default in all
Directors bundled with Power Pack+ (with FOS 7.2.0a and later).
enabled on
ways
Fabric Watch
Fabri
enables each switch to
monitor the SAN for potential faults and automatically alert network managers to problems before they
become failures. Fabric Watch tracks a variety of SAN fabric elements, events, and counters. Monitoring
fabric
isolation as well as performance measurement. Each switch in the SAN needs its own Fabric Watch
license.
NOTE:
Watch settings to the Fabric Vison licensed Monitoring and Performance Suite (MAPS) prior to
upgrading
Advanced Performance
Monitoring
This optional enabling technology
helps administrators monitor
and watch specific fabric metrics
tune and scale the fabric more efficiently. Plus, Advanced Performance Monitoring inc
for early warning detection of hot spots within the fabric, a powerful tool for maintaining overall
balanced performance.
Top Talkers is a component of Advanced Performance Monitoring and tracks the top traffic flows for
hosts and targets for a switch port or a switch. Top Talkers can help identify the ports that need certain
Quality of Service (QoS) attributes or it can help determine portions of the physical topology that need
(22U, 36U and 42U) 10000 G2 Series and the Intelligent Series racks and HPE (14U, 22U, 36U,
• Monitoring and Alerting Policy Suite: A policy-based monitoring tool with pre-built rules and
• Flow Visi
• Health and performance dashboard: A single customizable screen displayed in HPE SAN
• Application of the Fabric Vision LTU (FOS 7.2.0a and later)
• Application of the Power Pack+ LTU (FOS 7.2.0a and later)
• Upgrading existing Switch/Director loaded with Power Pack+ to FOS 7.2.0a or later
• Upgrading existing Switch/Director loaded with both Advanced Performance Monitor (APM)
s before they impact operations and reduce
automation that simplifies fabric-wide threshold configuration and monitoring.
specific application data flows without using taps to ensure optimized performance
Network Advisor that contains all critical SAN information for convenient review and analysis
HPE StoreFabric B-series Fibre Channel switches and
In all other cases, Fabric Vision can be
HPE StoreFabric B-series Fibre Channel switches and Directors in any one of the following
and Fabric Watch (FW) licenses to FOS 7.2.0a or later
c Watch is an optional license which comes bundled with the SN4000B and
-wide events, ports, SFPs, and environmental parameters permits early fault detection and
Fabric Watch has been obsoleted in FOS 7.4.0 and later. Users can migrate their Fabric
.
comes bundled with the SN4000B and
-- from a SID (Source ID) to a DID (Destination ID) -- so they can fineludes the ability
QuickSpecs
HPE SN4000B SAN Extension Switch
Product Highlights
Page 5
reconfiguration.
NOTE:
utilize the Fabric Vision licensed Flow Vision features for performance monitoring
Extended Fabric
Optional license which
and performance benefits of Fibre Channel Storage Area Networks (SANs) beyond the native 10 km
distance specified by the Fibre Channel standard.
ISL Trunking
For high performance enhanced Trunking this optional license
SN
16
bandwidth resource (up to 128Gb) when routing connections between 16G switches.
SAN Network Advisor
Professional
HPE
comes
with B
It is targeted for SMB customers that use FOS based SAN fabrics and require a management sol
for smaller SAN based fabric
SMB customers that initially start off with SAN Network Advisor Professional and have a small SAN
environment may over time feel the need for an enterprise
Professional+ or SAN Networ
complexity, and as they start to uptake more enterprise
Routing, FCIP, etc.). A non
or Professional
to SAN Network Advisor Professional+ or SAN Network Advisor Enterprise.
SAN Network Advisor
Enterprise and
Professional+
HPE SAN Network Advisor Enterprise and Professional+ are the enterprise
FOS products. S
management including enterprise
FCIP, adaptive networking, etc while HPE SAN Network Advisor Professional+ provides th
feature set except for support for the SN8000B 8
HPE SAN Network Advisor Enterprise delivers unprecedented scalability, up to 100 fabrics and 15,000
switch ports, while HPE SAN Network Advisor Pro
ports. To accommodate growth, there is an upgrade available to SAN Network Advisor Enterprise from
SAN Network Advisor Professional Plus.
WebTools
Web Tools is an intuitive and easy
and manage SAN fabrics.
standard laptop, desktop PC or workstation from any location within the enterprise.
Software Components, Optional
Integrated Routing
Integrated Routing is an optional license which provides native Fibre Channel Routing (FCR) on a per
port basis, rather than limiting routing ports to those on a dedicated routing blade or switch. Just like
traditional FCR, Integrated Routing uses EX_Ports to import/export devices between fabrics, enabling
Advanced Performance Monitoring has been obsoleted in FOS 7.4.0 and later. Users can
.
comes bundled with the SN4000B and extends all of the scalability, reliability,
, which comes bundled with the
4000B, logically aggregates E-ports to provide a high bandwidth trunk between two switches. Each
Gb switch needs its own license. The switch operating system views the trunk as a single, high
SAN Network Advisor Professional is a management application available at no-charge and
-series SAN Switches and:
• Allows management of 2 Fabric OS (FOS) fabrics (up to a 300 switch ports and 1000 devices)
• Performs group switch management beyond the scope of Web Tools
• Does not offer management of the SN8000B 8-Slot or DC SAN Backbone Directors
ution
s.
-class product (SAN Network Advisor
k Advisor Enterprise) as their environments start to grow in size and
-class functionality (such as Fibre Channel
-disruptive upgrade path is available from SAN Network Advis
AN Network Advisor Enterprise provides complete SN8000B 8-Slot Director
-class features/environments such as FICON, Fibre Channel Routing,
-Slot Director, DC SAN Backbone Director, and FICON.
Tasks can be performed through a Java-capable Web browser from a
-to-use graphical interface that enables organizations to monitor
fessional+ scales to 36 SAN Fabrics and 2560 switch
-class products that support
e same
QuickSpecs
HPE SN4000B SAN Extension Switch
Product Highlights
Page 6
selective device sharing while maintaining remote fabric isolation. Integrated Routing provides
architecture flexibility to route on a port
HPE
SN4000B 10Gb WAN
Rate
StoreFabric SN4000B
40Gb WAN Rate
Upgrade Licenses
HPE
optional license
increase the maximum available aggregate bandwidth for all tunnels to 10Gbps while the 40Gb WAN
Rate Upgrade license will increase the maximum available aggregate bandwidth for all tunne
4
FICON
Optional software allows FICON Switching to provide Fibre Channel and FICON intermix, FICON Control
Unit Port (CUP), and FICON cascading for more than one B
environments. The license feature provides
designed to allow mainframe applications to perform configuration, monitoring, management and
statistics collection. These applications include System Automation for OS/390 (SA/390), Dynamic
Channel Mana
FICON and FCP port zoning enhances separation with intermix operation.
HPE Smart SAN for
3PAR
HPE Smart SAN, optional software for HP 3PAR, makes end
management simple and reduces the probability of errors through automation. It is an application
embedded in SAN components (array, hosts and switches) that enables 3PAR arrays to orchestrate
configuration, settings and policies across the SAN. Sma
Switches, HPE Storefabric Fibre Channel Adapters (HBAs) and 3PAR storage. HPE Smart SAN for
3PAR through its Target Driven Peer Zoning (TDPZ) feature enables customers to automate peer
zoning, resulting in the creatio
in hours. Through automation, it reduces the probability of errors and potential downtime. Additional
information can be found here:
detail.html?oid=8295863#!tab=features
NOTE:
NOTE:
https://h20272.www2.hp.com/spock/
NOTE:
3PAR StoreServ storage.
-by-port basis, enabling increased scalability and fault isolation.
StoreFabric
Upgrade and HPE
StoreFabric SN4000B 10Gb WAN Rate and HPE StoreFabric SN4000B 40Gb WAN Rate are
s which enable additional WAN throughput. The 10Gb WAN Rate Upgrade license will
ls to
0Gbps.
-Series SAN Director in XP Storage Array
Control Unit Port (CUP) in-band management function
gement Facility (DCM) and Resource Management Facility (RMF). Hardware- enforced
-to-end SAN configuration and
rt SAN is only supported with B-series
n of fewer zones and enables configuration of zones in minutes and not
http://www8.hp.com/us/en/products/storage-software/product-
Supports B-series Brocade 16/8Gb FC switches with FOS 7.4.0a or later.
A list of supported HPE FC Adapters can be found at
Supports 3PAR StoreServ storage with 3.2.2 or later with only 16Gb target ports on HPE
QuickSpecs
HPE SN4000B SAN Extension Switch
HPE Support Services and Warranty Information
Page 7
Warran
(1
not included.
NOTE:
Saleable software carries its own warranty, see below.
S
physical defects for a period of ninety (90) days from delivery.
Exclusive Remedy
exclusive remedy for software that does not conform to this Limited Warranty shall be the repair
or replacement of the defective media. This warranty and remedy are subject to your returning
the defective media during the warranty period
which you obtained the software.
For bundled Software
Support
Your
performance and availability of your software. Experienced Res
trustworthy advice on issues such as software features and use, problem diagnosis and resolution, and
software defect identification.
Software support benefits include:
Protect yo
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Our integrated
portfolio of Services for storage help customers reduce costs, optimize data,
and recovery. HPE Support Services enable you to choose the right service level, length of coverage and response time as you
purchase your new storage solution, giving you full entitlement for the support f
Connect your devices
Unlock all of the benefits of your technology investment by connecting your products
to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a si
connecting, you will receive 24x7monitoring, pre
Care Service and HPE Datacenter Care Service customers will also benefit fro
increase optimization. All of these benefits are already available to you with your server storage and networking products, s
connected
1
2
Optimized Care
HPE Proactive Care
HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and
maintains IT stability by utilizing ta
your products are
proactive reporting and advice with our highest level of hardware support
En
ty
-1-1) Hardware Warranty - One-year on-site warranty, 8x5, next business day response, installation
The hardware warranty covers firmware and embedded non-saleable software.
oftware Warranty - Hewlett Packard Enterprise warrants only that the software media will be free of
: The entire liability of Hewlett Packard Enterprise and its suppliers and your
to Hewlett Packard Enterprise in the country in
HPE storage product includes comprehensive support and software updates to enhance the
ponse Center engineers provide
• Improved productivity of system managers and operators
• Improved system performance and reduced downtime due to software defects
• Expedited problem resolution through expert-level technical resources
• Software and documentation updates
• Electronic access to essential product and support information
ur business beyond warranty with HPE Support Services
streamline storage management, and improve backup
or need for your IT and business.
to Hewlett Packard Enterprise. Achieve up
ngle consolidated view of your environment. By
-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive
m proactive activities to help prevent issues and
- IDC
– HP CSC reports 2014 - 2015
to Hewlett Packard Enterprise support.
terprise 24x7, six hour hardware call-to-repair. Hewlett Packard Enterprise is the only leading
* with 6 hour call-to-repair commitment, three year Support Service
ilored, proactive reports with recommendations and advice when
connected to Hewlett Packard Enterprise. This Service combines three years’
- The Hewlett Packard
ecurely
QuickSpecs
HPE SN4000B SAN Extension Switch
HPE Support Services and Warranty Information
Page 8
manufacturer who makes this level of coverage available as a standard service offering for your most
valuable storage systems.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
Standard Care
HPE Proactive Care
HPE Proactive Care gives customers an enhanced call experience plus helps
maintains IT stability by utilizing personalized proactive reports with recommendations and advice
when your products are
proactive reporting and advice wi
is a problem.
NOTE:
their devices to make the most of these services and receive all the deliverables
Basic Care
HPE Foundation Care 24x7, three-year Support Service
HPE Foundation Care 24x7 gives you access to
a week for assistance on resolving issues. This service includes need based Hardware onsite response
within four hours. Simplify your support experience
to help
http://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA4-8876ENW&cc=us&lc=en
Related Services
HPE Installation Service
Provides for the basic hardware installation of
devices and networking options to assist you in bringing your new hardware into operation in a timely
and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981
HPE SAN Deployment Service
Hewlett Packard Enterprise delivers complete design and implementation services for Fibre Channel,
FCoE, FCIP, SAS, and iSCSI SA
http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981
For more information
www.hp.com/services/storage
To learn more on
representative or
Channel Partner
HPE
Authorized Service Partners
quoted
configuration tools.
www.hp.
* with 24x7 coverage, three year Support Service
preventing problems and
connected to Hewlett Packard Enterprise. This Service combines three years’
th our 24x7 coverage, four hour hardware response time when there
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-8855ENW.pdf
*HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect
.
Hewlett Packard Enterprise 24 hours a day, seven days
and make Hewlett Packard Enterprise your first call
resolve hardware or software problems.
Hewlett Packard Enterprise branded servers, storage
-9356EN.pdf
N connectivity components.
-8527EN.pdf
HPE Storage Services, please contact your Hewlett Packard Enterprise sales
Hewlett Packard Enterprise Authorized
Care Pack Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise
:
Services for customers purchasing from Hewlett Packard Enterprise or an enterprise reseller are
using Hewlett Packard Enterprise order
Customers purchasing from a commercial reseller can find HPE Support Services at
com/go/lookuptool
QuickSpecs
HPE SN4000B SAN Extension Switch
Family Information
Page 9
and 8/8 SAN Switch
SN6000B 16Gb FC Power Pack+
Departments
Fibre Channel Port Bandwidth
8Gbit/sec
8Gbit/sec
16Gbit/sec
http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguide
Storage system support
3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA
24 Max
24 Max
48 Max
Included with Power Pack+ or Optional
Adaptive Networking
Form factor
Zoning Software
Yes (Included)
Yes (Included)
Yes (Included)
power supplies
Features
1606 SAN Extension Switch
SN4000B SAN Extension Switch
Fibre Channel Port Bandwidth
Ethernet
OS Support
NOTE:
http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguide
Storage system support
3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA
16 Max
24 Max
Ethernet Ports
SFP
Trunking
Adaptive Networking
Form factor
1U
2U
Hot plug fans
Features
8/8 SAN Switch Base
8/24 SAN Switch Base
SN6000B 16Gb FC Switch and
Targeted Environment Workgroups,
Aggregate device
bandwidth
64 -192 Gbit/sec
OS Support
FC Ports 8 Enabled
Workgroups, Departments Workgroups, Departments
128 - 192 Gbit/sec
384-768 Gbit/sec
NOTE: Please Refer to SAN Design Guide
16 Enabled
24 or 48 Enabled
SFP B-series B-series B-series
Advanced
Trunking
Optional Upgrade Included with Power Pack+ or
Optional Upgrade
Upgrade
Included Included Included
1U 1U 1U
Hot plug, redundant
No No Yes
Hot plug fans No No Yes (integrated with power supply)
Targeted Environment Data Centers Data Centers
8Gbit/sec 16Gbit/sec
1Gbit/sec Ethernet 1/10/40Gbit/sec Ethernet
Please Refer to SAN Design Guide
FC Ports 4 or 16 Enabled
2 or 6 Enabled
24 FC Ports Enabled
16 Enabled
6 Max
B-series B-Series
Advanced
Included with Power Pack+ or Optional
Included
Upgrade
Included Included
Zoning Software Yes (Included) Yes (Included)
Hot plug, redundant
Yes Yes
power supplies
Yes Yes
Features
SN8000B 8-Slot SAN Director SN8000B 4-Slot SAN Director and 4-Slot SAN Director
QuickSpecs
HPE SN4000B SAN Extension Switch
Family Information
Page 10
Power Pack+
Power Pack+
Targeted Environment
Port Bandwidth
Up to 16Gbit/sec
Up to 16Gbit/sec
Storage system support
3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA
Ports
SFP
Advanced
Trunking
Adaptive Networking
Form factor
Zoning Software
power supplies
Hot plug fans
BladeSystem
Environment
bandwidth
http://www.hp.com/go/sandesign
http://www.hp.com/go/sandesignguide
internal
Included with Power Pack+ or
Included with Power Pack+ or Optional
Form factor
Zoning Software
Hot plug,
redundant power
supplies
Enclosure
Cloud Optimized Data Centers Cloud Optimized Data Centers
Aggregate device
bandwidth
OS Support
10.2 Tbit/sec
5.1 Tbit/sec
NOTE: Please Refer to SAN Design Guide
http://www.hp.com/go/sandesign or http://www.hp.com/go/sandesignguide
Up to 512 SFP Up to 256 SFP
B-series B-series
Included with Power Pack Included with Power Pack or Optional Upgrade
Included Included
14U 9U
Yes (included) Yes (included)
Hot plug, redundant
Yes Yes
Yes Yes
Features
Targeted
Brocade 16Gb SAN Switch
for HPE c-Class
Enterprise, Datacenters,
Workgroups, Departments
Brocade 8Gb SAN Switch for HPE c-
Class BladeSystem
Brocade 16Gb Fibre Channel SAN
Switch Module for HPE Synergy
Workgroups, Departments Enterprise, Datacenters, Workgroups,
Departments
Port Bandwidth 16 Gbit/sec 8 Gbit/sec 16 Gbit/sec
Aggregate device
OS Support
448 Gbit/sec
192 Gbit/sec
NOTE: Please Refer to SAN Design Guide
576 Gb/s (36 ports x 16 Gb/s)
or
Storage system
3PAR StoreServ, StoreVirtual 4000, P9000/XP, P6000/EVA, P2000/MSA
Support
Ports 12 external /16 internal 4 or 8 external / 8 or 16 internal 8 SFP+ external, 4 QSFP external /12
SFP B-series B-series B-series
Advanced
Trunking
Optional Upgrade
Adaptive
Networking
Embedded Embedded Embedded
Yes (Included) Yes (Included) Yes (Included)
Yes, in BladeSystem
Hot plug fans Yes, in BladeSystem
Included with Power Pack+ or Optional
Upgrade
Upgrade
Included Included Included
Yes, in BladeSystem Enclosure Yes, in Synergy Frame
Enclosure
Yes, in BladeSystem Enclosure Yes, in Synergy Frame
QuickSpecs
HPE SN4000BExtension SAN Switch
Configuration Information
Page 11
Step 1 – Base Configuration + Power Pack
Select one:
Model
Model Description
Part Number
HPE
Pack+
Switch
HPE StoreFabric SN4000B Power Pack+ SAN Extension Switch
E7Y73B
4
switch for Fibre Channel over Internet Protocol (FCIP) traffic forwarding over IP wide
area networks (WAN). Includes
optical transceivers listed below. Ethernet ports require optical or copper
transceivers listed below.
NOTE:
E
livery software licenses with new part numbers listed in this document are functionally equivalent to the corresponding
physical licenses with different part numbers. Some software licenses in this document are represented by two part
numbers, the first of which is the E-Delivery version (ending with AE) and the second is the physical version.
Step 2
Model Description
Part Number
16 Gb Transceivers
HP
HP B-series 16Gb SFP+ Long Wave 10km Transceiver
QK725A
HP B
H6Z29A
Model Description
Part Number
8 Gb Transceivers
HPE 8Gb Shortwave B-series FC SFP+ 1 Pack
AJ716B
HP 8Gb Long Wave B-series 10km Fibre Channel 1 Pack SFP+ Transceiver
AJ717A
HP B-series 8Gb Extended Long Wave 25km Fibre Channel SFP+ Transceiver 1 Pack
AW538A
4 Gb Transceivers
HP 4Gb Short Wave B-series Fibre Channel 1 Pack SFP Transceiver
AJ715A
HP 4Gb Long Wave B-series 30km Fibre Channel SFP Transceiver 1 Pack
AN211A
1 GbE Transceivers
HP StoreFabric B
E7Y74A
HP B
AW537A
10 GbE Transceivers
HP B
AP823A
HP B-series 10GbE Long Wave SFP+ Transceiver
AP824A
40 GbE Transceivers
HP StoreFabric B
E7Y75A
HP StoreFabric B
Optical Cables
HPE PremierFlex OM4+ Fiber Optic Cables
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable
QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable
QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable
QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable
QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable
QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable
QK737A
SN4000BPower
SAN Extension
2 ports (24 16Gb Fibre Channel , 16 1/10 GbE and 2 40 Gigabit Ethernet) Extension
Power Pack. NOTE: Fibre Channel ports require
Some HPE B-series software licenses are now available through the Electronic Delivery (E-Delivery) mechanism. The
-De
– Options
E B-series 16Gb SFP+ Short Wave Transceiver QK724A
-series 16Gb LW 25km FC SFP 1-pack Transceiver
-series 1GbE LX SFP Transceiver
-series 1Gb Ethernet Copper SFP Transceiver 1 Pack
-series 10GbE Short Wave SFP+ Transceiver
-series 40GbE Long Range QSFP+ Transceiver
-series 40GbE Short Range QSFP+ Transceiver E7Y76A
QuickSpecs
HPE SN4000BExtension SAN Switch
Configuration Information
Page 12
MPO/MPO Multi-mode Cables
HP Premier Flex MPO/MPO Multi-mode OM4 8 fiber 10m Cable
QK729A
HP Premier Flex MPO/MPO Multi-mode OM4 8 fiber 50m Cable
QK731A
HP Premier Flex MPO/MPO OM4 100m (12ft) Cable
H6Z30A
OM3 LC-LC type cables
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HP LC to LC Multi
AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
Step 3
NOTE:
Optional Software
HPE SAN Network Advisor Enterprise Software E
TC352BAE
(Physical License
– TC352B)
HPE SAN Network Advisor Professional Plus Software E
TC353BAE
(Physical License
– TC353B)
HPE SAN Net
TC354BAE
(Physical License
– TC354B)
HPE
(Physical License
- D4U29A)
HPE
T5528AAE
(Physical License
HPE
TA748AAE
(Physical License
– TA748A)
NOTE:
upon IBM certification. Please refer to
stream at
information.
HPE
D4U27AAE
(Physical License
– D4U27A)
- Optional Software*
* For Fabric OS (FOS) minimum requirements, please refer to: http://spock.corp.hp.com/
-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
-LTU
-LTU
work Advisor Professional Plus Upgrade E-LTU
StoreFabric SN4000B FICON Accelerator E-LTU D4U29AAE
B-series Integrated Routing E-LTU
- T5528A)
SAN Switches FICON CUP E-LTU
The FICON CUP and the FICON CUP accelerator support is contingent
The HPE B-Series FICON connectivity
HPE "Single Point of Connectivity Knowledge" (SPOCK) for the latest
StoreFabric SN4000B 10Gb WAN Rate Upgrade E-LTU
QuickSpecs
HPE SN4000BExtension SAN Switch
Configuration Information
Page 13
HPE
D4U28AAE
(Physical License
– D4U28A)
NOTE:
Electronic Delivery (E
with new part numbers listed in this document are functionally equivalent to the
corresponding physical lic
licenses in this document are represented by two part numbers, the first of
which is the E
version.
NOTE:
to customers. Instead, customers will be able to access and download the
software from The HPE Product Download web site.
StoreFabric SN4000B 40Gb WAN Rate Upgrade E-LTU
Some HPE B-series software licenses are now available through the
-Delivery) mechanism. The E-Delivery software licenses
enses with different part numbers. Some software
-Delivery version (ending with AE) and the second is the physical
HPE SAN Network Advisor software will no longer be shipped as a DVD
QuickSpecs
HPE SN4000B SAN Extension Switch
Technical Specifications
Page 14
System Architecture
Ports
42 ports: 24 Fibre Channel (E, F, M, FL, EX) , sixteen 1/10 and two 40 Gigabit
Ethernet (VE) ports
B
interoperability
Performance
auto
1/10/40Gbps line speed
ISL Trunking
Up to eight 16 Gbps ports per Brocade Trunk; up to 128 Gbps per trunk.
Fibre Channel aggregate
bandwidth
384
FCIP aggregate
bandwidth
40
Fabric latency
700 ns with no contention, cut
16 Gbps
Maximum frame size
2112
Maximum MTU size
Ethernet Jumbo Frames at 9,000-bytes
Classes of service
Class 2, Class 3, Class F (inter
Port types
F_Port, E_Port, E
and self-discovery based on switch type (U_Port). VE_Port (FCIP and virtual
E_Port)
Data traffic types
Fabric switches supporting unicast, multicast (255 groups), and broadcast
USB One USB por
Media types
Fibre Channel: Brocade hot
short wavelength (SWL), long wavelength (LWL), and extended long
wavelength (ELWL) transceivers (available wavelength
Gbps and 16 Gbps SFPs)
Ethernet: Brocade hot
reach wavelength (SRWL), long reach wavelength (LRWL), extended long
wavelength (ELWL), and copper SFP/SFP+ transceivers (available reach
opt
Fabric services
Simple Name Server (SNS); Registered State Change Notification (RSCN),
NTP, RADIUS, RCS (Reliable Commit Service), Dynamic Path Selection
(DPS), Exchange
lossless), Brocade Advanced Zoning, Web Tools, Adaptive Networking with
QoS, Extended Fabric, ISL Trunking, Fabric Vision technology, and
-series switch
• 8/8 SAN Switch
• 8/24 SAN Switch
• 1606 SAN Extension Switch
• SN4000B SAN Extension Switch
• Brocade 8Gb SAN Switch for HPE BladeSystem c-Class
• Brocade 16Gb SAN Switch for HPE BladeSystem c-Class
• Brocade 16Gb Fibre Channel SAN Switch Module for HPE Synergy
• SN8000B Director Switches
• SN6000B Fibre Channel Switch
• SN6500B Fibre Channel Switch
• SN3000B Fibre Channel Switch
-sensing of 4, 8, and 16 Gbps port speeds. FCIP Performance:
Gbps Full Duplex
Gbps: 2 ports at 20 Gbps (data rate)
-through routing at
-byte payload
ions vary from 1 GbE, 10 GbE, and 40 GbE)
-switch frames)
X_Port, (FCR E_Port), D_Port (Diagnostic), M_Port (Mirror),
t for system log file downloads or firmware upgrades
-pluggable Small Form Factor (SFP) and SFP+,
options vary for 8
-pluggable Small Form Factor (SFP) and SFP+, short
-based routing, device-based routing, port-based routing,
QuickSpecs
HPE SN4000B SAN Extension Switch
Technical Specifications
Page 15
Advanced Extension. Optional Fabric Services include: Integrated Routing,
(FCR), FICON CUP, FICON Mana
Accelerator for FICON.
Licensing
HPE
• This upgrade license will increase the maximum available aggregate
bandwidth for all tunnels to 10Gbps.
HPE
• This upgrade license will increase the maximum available aggregate
bandwidth for all tunnels to 40Gbps. This license can only be installed when
the 10Gb WAN Rate
g a WAN
Rate Upgrade license, users will need to adjust the aggregate bandwidth
capacity for all tunnels to lower limits before removing one or both upgrade
license(s). If both the 10 Gb WAN Rate Upgrade and 40Gb WAN Rate
Upgrade licenses are installed on
WAN Rate Upgrade license before removing the 40Gb WAN Upgrade
license.
NOTE:
support a maximum aggregate bandwidth for all tunnels at 5Gbps. The
10Gb WAN Rate
to all FCIP ports on the switch. Without these licenses the switch will
only allow 5Gb of FCIP traffic and the 40GbE ports will be disabled. By
Adding the 10Gb WAN Upgrade license the throughput limitation i
increased to 10Gbps. If the 40Gb WAN Upgrade license is added the
40GbE ports are enabled and all FCIP throughput restrictions are
removed.
HPE
Integrated Routing is an optional license which provides native Fibre
Ch
HPE
Control Unit Port (CUP) enables host control of switches in mainframe
environments
HPE
gement Server (FMS), and Advanced
options
StoreFabric SN4000B 10Gb WAN Rate Upgrade license
StoreFabric SN4000B 40Gb WAN Rate Upgrade license
The base configuration without either upgrade license will
B-series Integrated Routing license:
Upgrade license is already installed. If removin
a switch, users cannot remove the10Gb
Upgrade and 40Gb WAN Rate Upgrade licenses apply
s
annel Routing (FCR) on a per port basis.
SAN Switches FICON CUP license:
StoreFabric SN4000B FICON Accelerator license:
• Accelerates IBM zGM (XRC), FICON tape read/writes, and z/OS
host connection to Teradata systems
QuickSpecs
HPE SN4000B SAN Extension Switch
Technical Specifications
Page 16
Management
Supported management
software
SSH v2, HTTP/HTTPS, SNMP v1/v3, Telnet;
SNMP (FE MIB, FC Management MIB); Brocade
Web Tools; Brocade Network Advisor SAN
Enterprise or Brocade Network Advisor
Professional/Professional Plus (optional);
Command Line Interface (CLI); SMI
LDAP
Security
AES
256 IPsec encryption on virtual ISLs (VE_Port),
DH
FCAP switch authent
compliant, HTTPS, IP filtering, LDAP with IPv6,
OpenLDAP, Port Binding, RADIUS, TACACS+,
User
(RBAC), Secure Copy (SCP), Secure RPC, SFTP,
SSH v2, SSL, Switch Binding, Trusted Switch
Management ac
10/100/1000 Ethernet (RJ
Fibre Channel ports; serial port (RJ
USB port
Diagnostics
POST and embedded online/offline diagnostics,
including FCping, Pathinfo (FCtraceroute), etc.
Mechanical
Enclosure
Back
power from back
Size Width: 44 cm (17.3 in.)
Height: 8.6 cm (3.2 in.)
Depth: 60.9 cm (24.01 in.)
System weight
19 kg (42.0 lb) with two power supplies, without
SFP/SFP+
Environmental
Temperature
Operating: 0°C t
Non-operating: -25°C to 70°C (-13°F to 158°F)
Humidity
Operating: 10% to 85% (non
Non-operating: 10% to 90% (non-condensing)
Altitude
Operating: Up to 3000 m (9842 ft)
Storage: Up to 12 km (39,370 ft)
Shock
Opera
Non-operating: 33 g, 11 ms, half-sine, 3/eg Axis
Vibration
Operating: 0.5 g sine, 0.4 grms random, 5 to 500
Hz
Non
500 Hz
Heat dissipation
Maximum 22 ports: 590 BTU/hr
Airflow
Maximum 60 CFM; nominal 44 CFM
Power
Power supply
Dual hot-swappable redundant power supplies
Power inlet
C14; requires C13 plug
Input voltage
85 to 264 VAC nominal
Input line frequency
47 to 63 Hz
Inrush current
Maximum of 60 amps for period of 10 to 150 ms
Power
Short
-S RADIUS,
-GCM-256 encryption on ISLs, AES-GCM-
-CHAP (between switches and end devices),
ication; FIPS 140-2 L2-
-defined Role-Based Access Control
cess
-45), in-band over
-45) and one
-to-front airflow; 2U, 19-inch EIA-compliant,
o 40°C (32°F to 104°F)
ting: 20 g, 6 ms, half-sine
-condensing)
-operating: 2.0 g sine, 1.1 grms random 5 to
-range optics: Nominal 388 watts/1,324
QuickSpecs
HPE SN4000B SAN Extension Switch
Technical Specifications
Page 17
BTU/hr; maximum 454 watts/1,550 BTU/hr
Long
BTU/hr; maximum 492 watts/1,679 BTU/hr
-range optics: Nominal 426 watts/1,454
QuickSpecs
HPE SN4000B SAN Extension Switch
Summary of Changes
Page 18
Date
Version History
Action
Description of Change
07-Jun-2016
From Version 4 to 5
Changed
Updated SAN network advisor SKU/E-LTU and added Smart SAN details
16-Feb-2016
From Version 2 to 3
Changed
Changed made to the entire document
made throughout the entire document
30-Feb-2015
Version 1
Created
Document Created
Sign up for updates
© Copyright 201
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
ser
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or o
c04499584
08-April-2016 From Version 3 to 4 Changed Changes made to the Services Sections
05-Jun-2015 From Version 1 to 2 Changed SKUs description updated, Obsolete SKUs removed (AK870A), Changed
vices are set forth in the express warranty statements accompanying such products and services.
6 Hewlett Packard Enterprise Development LP. The information contained herein is
missions contained herein.
- 15121 - Worldwide - V5 – 07-june-2016
Loading...