HPE C0L99A Getting Started Guide

QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives

Overview

Page 1
HPE StoreEver LTO Ultrium Tape Drives
The family of HPE LTO Ultrium tape drives is Hewlett Packard Enterprise's premier line of backup and archive devices. Based on
. If data is critical to your business, protect it with an
HPE LTO Ultrium tape drive.
HPE StoreEver LTO Ultrium Half-Height Tape Drives
HPE StoreEver LTO Ultrium External Tape Drive
HPE StoreEver LTO Ultrium Internal Tape Drive
HPE StoreEver LTO-8 Ultrium 30750 Tape Drive
The HPE LTO-8 Ultrium 30750 tape drive represents Hewlett Packard Enterprise's eighth-generation of LTO tape drive
fewer data cartridges to meet their storage needs, significantly reducing their IT costs and increasing their ROI.
HPE StoreEver LTO-7 Ultrium 15000 Tape Drive
The HPE LTO-7 Ultrium 15000 tape drive represents Hewlett Packard Enterprise's seventh-generation of LTO tape drive
access of tape cartridges. Capable of data transfer rates up to 300 MB/sec (native), its Speed Matching feature further optimizes
the LTO Ultrium format, an open standard with a well-defined twelve-generation roadmap, HPE LTO Ultrium tape drives offer customers the best choice for investment protection. With ultimate reliability and ease of use in mind, even at 100% duty cycles, HPE's rugged design builds on superior LTO technology and adds advanced features like hardware data encryption to create a new level of data protection. The tape drives employ dynamic data rate matching to adjust to the speed of the host, reducing wear and tear on both drive and media and increasing performance, even on slower hosts. The family of tape drives also features support for HPE Library and Tape Tools which provides diagnostics, and performance optimization. Included with the HPE LTO Ultrium tape drives is the option to download a fully functional 60-day trial of Backup Exec and receive a 50% discount off Veritas MSRP. Visit
http://www.backupexec.com/hpe for full details of the promotion
technology capable of storing up to 30TB (compressed 2.5:1) per cartridge while providing ease of use with support for LTFS and AES 256-bit hardware data encryption easy-to-enable security to protect the most sensitive data and prevent unauthorized access of tape cartridges. Capable of data transfer rates up to 300 MB/sec (native), its Speed Matching feature further optimizes performance by matching speed of host to keep drives streaming and increase the reliability of the drive and media. HPE LTO Ultrium half-height drives are designed for server customers in direct attached storage (DAS) environments. For IT organizations with stringent, long-term data retention requirements, the Ultrium 30750's WORM (Write-Once, Read-Many) data protection feature offers a simple and secure method for archiving records as part of a compliance solution to meet the toughest of industry regulations. The Ultrium 30750 tape drives provide investment protection with full read and write backward support with LTO-7 media. By doubling the native capacity of previous generation Ultrium drives, Hewlett Packard Enterprise customers now require
technology capable of storing up to 15TB (compressed 2.5:1) per cartridge while providing ease of use with support for LTFS and AES 256-bit hardware data encryption easy-to-enable security to protect the most sensitive data and prevent unauthorized
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Product Highlights
Page 2
performance by matching speed of host to keep drives streaming and increase the reliability of the drive and media. HPE LTO
media, and the ability to read LTO-5 cartridges.
HPE StoreEver LTO-6 Ultrium 6250 Tape Drive
The HPE LTO-6 Ultrium 6250 tape drive represents HPE's sixth-generation of LTO tape drive technology capable of storing up to
enable security to protect the most sensitive data and prevent unauthorized access of tape cartridges. Capable
media, and the ability to read LTO-4 cartridges.
HPE StoreEver LTO-5 Ultrium 3000 Tape Drive
The HPE LTO-5 Ultrium 3000 represents Hewlett Packard Enterprise's fifth-generation of LTO tape drive technology capable of
investment protection with full read and write backward support with LTO-4 media, and the ability to read LTO-3 cartridge.
LTO Ultrium Technology
Linear Tape-Open technology was developed by three leaders in the storage industry - Hewlett
technology to develop an entirely new format based on the best of existing technologies. Because LTO Ultrium technology was a new format, it required no cumbersome support of legacy formats, so it could
the three technology provider companies, has developed a well-defined twelve-generation roadmap.
Ultrium LTO-5 and LTO-6 tape drive technologies from Hewlett Packard Enterprise use a linear format
Fourth-generation LTO Ultrium drives (Ultrium 1840, Ultrium 1760) read and write LTO-3
Ultrium half-height drives are designed for server customers in direct attached storage (DAS) environments. For IT organizations with stringent, long-term data retention requirements, the Ultrium 15000's WORM (Write-Once, Read-Many) data protection feature offers a simple and secure method for archiving records as part of a compliance solution to meet the toughest of industry regulations. The Ultrium 15000 tape drives provide investment protection with full read and write backward support with LTO-6
6.25TB (compressed 2.5:1) per cartridge while providing ease of use with support for LTFS and AES 256-bit hardware data encryption easy-to­of data transfer rates up to 1.44TB/Hour (compressed 2.5:1), HPE's exclusive Data Rate Matching feature further optimizes performance by matching speed of host to keep drives streaming and increase the reliability of the drive and media. HPE LTO Ultrium half-height drives are designed for server customers in direct attached storage (DAS) environments. For IT organizations with stringent, long-term data retention requirements, the Ultrium 6250's WORM (Write-Once, Read-Many) data protection feature offers a simple and secure method for archiving records as part of a compliance solution to meet the toughest of industry regulations. The Ultrium 6250 tape drives provide investment protection with full read and write backward support with LTO-5
storing up to 3TB per cartridge while providing ease of use with support for LTFS and AES 256-bit hardware data encryption easy-to-enable security to protect the most sensitive data and prevent unauthorized access of tape cartridges. Capable of data transfer rates up to 1TB/Hour. HPE's exclusive Data Rate Matching feature further optimizes performance by matching speed of host to keep drives streaming and increase the reliability of the drive and media. HPE LTO Ultrium half-height drives are designed for server customers in direct attached storage (DAS) environments. For IT organizations with stringent, long-term data retention requirements, the Ultrium 3000's WORM (Write-Once, Read-Many) data protection feature offers a simple and secure method for archiving records as part of a compliance solution to meet the toughest of industry regulations. The Ultrium 3000 provides
Packard Enterprise, IBM, and Quantum - who brought together their combined expertise in tape
be designed without compromising on reliability or performance. The LTO Program, a consortium of
of 1280 tracks and 2176 tracks (respectively), writing sixteen tracks simultaneously. Ultrium LTO-7 and LTO-8 tape drives feature a breakthrough in recording technology by writing thirty-two tracks simultaneously on a linear format of 3584 tracks and 6656 tracks respectively.. The data is written in a serpentine pattern; the tape reverses direction after each set of tracks is written. This provides higher density recording, enabling customers to lower costs and increase efficiency by storing more data on a single tape in an industry standard format.
The LTO standard for backward compatibility up to generation seven is to write back one generation and read back two generations; therefore:
First-generation LTO Ultrium drives (HPE Ultrium 230, HPE Ultrium 232) read and write
LTO-1 media
Second-generation LTO Ultrium drives (HPE Ultrium 460, HPE Ultrium 448) read and write
LTO-1 and LTO-2 media.
Third-generation LTO Ultrium drives (HPE Ultrium 920, Ultrium 960) read and write LTO-2
and LTO-3 media and also read LTO-1 media.
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Product Highlights
Page 3
and LTO-4 media and also read LTO-2 media.
compatibility with tape drives and media manufactured by other LTO vendors.
LTO data compression (LTO-DC) is an enhanced version of Advanced Lossless Data Compression
scans. The system is used in all LTO Ultrium tape drives.
The decision about which tape technology you should buy next should be based on your future, not
free technology that uses the best attributes from a wide range of tape technologies
Lowest media cost of any 'superdrive' tape technology
Hardware Based
Since LTO generation 4, HPE LTO Ultrium tape drives support hardware-based encryption to enable
No loss in performance of backup
Linear Tape File System
LTFS makes tape self-describing, file-based, and easy-to-use, it also provides users with the ability to
http://www.hpe.com/storage/ltfs
Fifth-generation LTO Ultrium drives (Ultrium 3280, Ultrium 3000) read and write LTO-4 and
LTO-5 media and also read LTO-3 media.
Sixth-generation LTO Ultrium drives (Ultrium 6650, Ultrium 6250) read and write LTO-5 and
LTO-6 media and also read LTO-4 media.
Seventh-generation LTO Ultrium drives (Ultrium 15000) read and write LTO-6 and LTO-7
media and also read LTO-5 media
Eighth-generation LTO Ultrium drives (Ultrium 30750) read and write LTO -7 and LTO-8 media
As part of the LTO open standard, all HPE tape drives and media offer the same standards of
(ALDC) hardware compression. Compression is automatically turned off if the compressed data would cause an overall expansion in data size, hence optimizing the available capacity on the media. Data compression is also turned off if data is found to be uncompressible; thus, allowing for better data
your past, investment. Choose the LTO Ultrium format when you need the following advantages:
Maximum reliability, capacity and performance
Compatibility with a broad range of operating systems and servers (e.g., a mixed system
environment)
A legacy-
without any compromises for backward compatibility requirements
A solid roadmap for future generations of the technology
An open format available from multiple vendors
Encryption
(LTFS)
greater levels of security:
AES 256-bit Encryption
- Easy-to-enable encryption for a secure backup
- Helps prevent unauthorized accessed of tape media if cartridges are lost or stolen
- Eliminates the need to purchase and manage additional h/w
use standard file operations on tape media for accessing, managing and sharing files with an interface that behaves just like a hard disk. In addition, LTFS provides the ability to share data across platforms, as you would with a USB drive or memory stick. Simply load a tape into the drive, mount it into the file system, and it becomes visible as a disk.
For more information, including user guide, downloads and compatibility, visit:
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Product Highlights
Page 4
HPE StoreOpen
HPE StoreOpen Standalone is a free software application that helps LTFS users to use and manage
Available for Windows and Mac environments, it provides a native GUI with a familiar look and feel. It is
http://www.hpe.com/storage/StoreOpen
Data Rate Matching
Data Rate Matching combines sophisticated buffer management with HPE's exclusive Variable Tape
oss the wide range of transfer rates. This feature ensures that the tape drive continues
It minimizes rewinding and repositioning of the tape, reducing wear and increasing reliability
WORM (Write-Once,
Critical to the success of data retention policies in highly regulated environments is the ability to store
in the drive firmware, cartridge memory, and tape formatting, LTO Ultrium
Two distinctive tape cartridges to easily distinguish and manage both rewriteable and WORM
immediately upon insertion into to the tape drive.
Standalone
single tape drives and autoloaders.
installed automatically as part of the LTFS package and it completely removes the need for low-level terminal commands by guiding users through the full process of select, prepare and mount an LTFS cartridge.
For more information, including user guide, downloads and compatibility, visit:
Speed technology to allow the tape drive to match its transfer rate to the host speed dynamically and continuously acr to stream data regardless of the environment, and brings two big advantages:
It optimizes backup performance, regardless of the speed of the host or the network
Read-Many) Drive and Media Support
and manage data in an unalterable state. Following stringent guidelines set forth by regulatory agencies such as the SEC and HIPPA, IT organizations must now integrate new solutions and policies that can verify the integrity of stored data for periods that can extend well beyond seven years.
LTO generation 3 and higher tape drives feature the ability to archive and store data in a non­rewriteable format that meets the most stringent regulatory guidelines. Using a combination of integrated fail-safe features drives can archive large amounts of data for periods of up to 30 years in a secure, untampered state. Since all LTO generation 3 and higher tape drives include support for both rewritable and WORM media, IT organizations can now easily integrate a secure, long-term archiving solution into their current data protection strategy. As compared to other technologies that feature support for WORM storage, LTO tape drives offers the advantages of:
A single drive to support all backup and archiving needs
data cartridges
A specially designed WORM data cartridge with multiple integrated fail-safe features to
prevent accidental or intentional overwriting of data
High-capacity, low-cost HPE WORM media that can store up to 30TB (LTO-8) of data on a
single data cartridge
Support from many backup and archiving software vendors, providing the most
comprehensive and mainstream support in the industry
The LTO open standard that offers greater choice and compatibility across all third- and later
generation Ultrium products
NOTE: While all HPE LTO generation 3 and higher tape drives support LTO Ultrium WORM media, some third-generation LTO Ultrium tape drives from other manufacturers may not include read and write support for LTO Ultrium WORM media. For non-HPE LTO-3 and LTO-4 tape drives, please check the manufacturers' specifications to ensure this support is provided if you are using your WORM media. If WORM support is not provided, the drive will eject the WORM tape cartridge
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Product Highlights
Page 5
Software in the Box
The HPE LTO Ultrium tape drives provide access to a unique discount to purchase Veritas Backup
For the trialware download, visit http://www.backupexec.com/trybe
HPE Ultrium Storage
Hewlett Packard Enterprise branded Linear Tape Open (LTO) Ultrium cartridges are designed,
factured and tested to provide outstanding reliability for backing up, archiving and restoring your
data. We continuously monitor the quality of our branded tapes using what we believe is the industry’s
create
ulled and over 40 million
Your best choice for ease
of support and maximum dependability is to use HPE-branded Ultrium cartridges at all times.
Diagnostics
HPE LTO Ultrium tape drives and automation are supported by HPE Library and Tape Tools (LTT).
tape
http://www.hpe.com/suppport/tapetools
Exec Software. There is also an option to download a free fully-functional 60-day trial with no obligation to purchase.
For full details of the promotion, visit: http://www.backupexec.com/hpe
Media
manu
most comprehensive and forensic specification for quality and reliability. Using real life conditions and both Hewlett Packard Enterprise and non-HPE drives, we supplement extensive in-process QA parametric testing with ongoing drive based scrutiny, to make sure performance is excellent for any combination of device, duty cycle and environment.
Because HPE is a leading supplier of both LTO tape devices and media, we have the ability to re­many different scenarios mirroring how customers use their cartridges. And many of HPE’s protocols are either unique in nature or scale, such as the HPE ‘Green Tape’, and HPE ‘Environmental Interchange’ tests, or far surpass industry standards, for example, HPE’s ‘Locate/Rewind/Append’ test. Since the beginning of 2016, almost 700 million meters of media have been p gigabytes of data have been written in HPE’s demanding GTT protocol. All of these ongoing tests are
intended to ensure HPE LTO Ultrium media is the most reliable you can find.
This tool is intended to help in the installation and maintenance of HPE tape drives and devices, including:
Verifies installation of the drive
Test/verify the health of the drive and media
Provides Hewlett Packard Enterprise support with detailed device information
Multiple options for finding and upgrading new firmware
Performance optimization and recommendations
Included with each Ultrium tape drive and available via free download supporting all HPE
products
Instructions and downloads of HPE Library and Tape Tools are available at:
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives

Compatibility

Page 6
Hewlett Packard Enterprise extensive compatibility testing program assures that your HPELTO Ultrium tape drive works with
Ultrium tape drives, check the
Server Compatibility
HPE Ultrium tape drives are supported on the following classes of HPE systems:
http://www.hpe.com/storage/DAPRcompatibility for the latest hardware compatibility information.
OS Support
Microsoft® Windows, HPE-UX, Tru64, Red Hat Linux, SUSE Linux, IBM-AIX, Sun Solaris and other
information.
Backup Software
Supported with HPE Data Protector, ARCserve Backup, EMC NetWorker, EMC Retrospect, IBM Tivoli
information.
SAS Installation
HPE SAS tape drives are available as internal and external models. Both models are supplied with SAS
http://www.hpe.com/Storage/DAPRcompatibility
leading servers, operating systems, and backup applications - and not just those sold by Hewlett Packard Enterprise. HPE LTO Ultrium tape drives work seamlessly on many platforms, making them especially suitable if you have a mixed system environment. For the latest list of servers, workstations, operating systems, and backup software that support HPE tape backup compatibility pages on our Web site at: http://www.hpe.com/storage/DAPRcompatibility
HPE ProLiant DL servers
HPE ProLiant ML servers
HPE Integrity servers
HPE 9000 servers
HPE Apollo
HP Inc. workstations
HPE Ultrium tape drives are also supported on server platforms from third-party manufacturers including:
Dell
IBM
Sun
For details of which tape drive models work with which systems, including third-party systems, visit:
operating systems.
NOTE: Please visit: http://www.hpe.com/storage/DAPRcompatibility for the latest compatibility
Support
Storage Manager, Veritas NetBackup, Veritas Backup Exec,, BakBone NetVault, Commvault Simpana, Tolis Group BRU, Archiware P5, Qstar Archive Manager and others.
NOTE: Please visit: http://www.hpe.com/Storage/DAPRcompatibility for the latest compatibility
cables that allows you to connect to an internal port (if available) on the embedded SAS controller inside the server.
Some server models will allow direct connect to a spare SAS connector on the native SAS controller. Other servers which do not have a spare connector might require you to reconfigure hard disk drive bays and in a few instances, you may also lose the use of one of the hard disk drive bays and will need to rebuild your RAID configuration. In these configurations the simple, recommended solution is connecting to an option SAS host bus adapter and optional SAS cable.
For the most up-to-date information about recommended SAS HBAs and supported cabling configurations with your make and model of server, always refer to:
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Compatibility
Page 7
Cables and Termination
All cables required for a typical internal and external connection to Hewlett Packard Enterprise servers
information.
Performance Tuning
Use HPE Library and Tape tools to assist in this area at: http://www.hpe.com/storage/tapetools
benchmarking purposes.
are provided with your tape drive. For non-Hewlett Packard Enterprise servers, please consult your manufacturers' server specifications to determine if the cable provided with your LTO Ultrium tape drive is appropriate for use with that server.
SAS-based HPE LTO Ultrium models ship with SAS cable which allows direct attach from embedded SAS controller.
NOTE: Visit: http://www.hpe.com/Storage/DAPRcompatibility for the latest compatibility
Device performance test - will run data to an LTO drive direct from memory to prove the drive is capable of high performance if the data supply rate is fast enough.
System performance test for backup will read data from your primary storage device e.g. EVA disk array, and tell you how fast the array can supply multiple streams of data
System performance test for restore, this tool generates data of a known size and compressibility for
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives

Service and Support, HPE Support, and Warranty Information

Page 8
Warranty and
Hewlett Packard Enterprise provides a 3-year, next-day, product exchange, limited warranty for all the
HPE Support Services: Packaged server and storage services for increased uptime, productivity and ROI
When it comes to robustness and reliability, standard computing equipment warranties have matured along with technology. Good
.
http:// www.hpe.com/services/storage
Recommended HPE Support Services for optimal satisfaction with your HPE product.
Recommended Support
HPE Foundation Care 24x7 connects you to Hewlett Packard Enterprise 24 hours a day, seven days a
Service.
HPE Foundation Care 24x7 connects you to Hewlett Packard Enterprise 24 hours a day, seven days a
Service.
Important Notice for Tape
NOTE: These services do not apply to Tape Drives mounted in a 1U Rack
Services Included with the Product
Ultrium Tape Drives, plus 9x5 phone support for the duration of the warranty.
For more information about Hewlett Packard Enterprise's Global Limited Warranty and Technical Support, visit:
http://www.hpe.com/storage/warranty
When you buy HPE server and storage products and solutions, it's also a good time to think about what levels of support you may need. Our portfolio of service options reduce deployment and management worries while helping you get the most out of your server and storage investments. We take a holistic approach to your environment, bridging servers, blades, storage, software and network infrastructures with our packaged HPE Support Services for servers and storage.
Protect your business beyond warranty
news that can also create problems stemming from depending on standard warranties designed to only protect against product defects and some downtime causes. Using a standard approach to warranty uplifts, such as HPE Support Services, helps reduce downtime risks and provides operational consistency for mission-critical and standard business computing.
HPE Support Services: Upgrading or extending standard server and storage warranties cost effectively HPE Support Services offer a standard reactive hardware and software support services suite sold separately. The portfolio also provides a combination of integrated proactive and reactive services, such as Proactive Care Service and Proactive Care Advanced In addition with HPE Proactive Select, you can acquire the specific proactive constancy and technical services. HPE Proactive Select menu offers a broad set of service options that you can mix and match depending on your specific requirements. Proactive service options include offers for server, storage, network, SAN device, software, environment and education services.
HPE server and storage lifecycle support services offers a full spectrum of customer care—from technology support to complex migrations to complete managed services. HPE Factory Express provides customization, integration and deployment services for turnkey solutions. HPE Education Services offer flexible, comprehensive training on to help your IT staff get the most out of your server and storage investments. HPE Financial solutions extend innovative financing and cost-effective asset management programs-from purchase to equipment retirement.
Learn more:
http://www.hpe.com/services/storage
NOTE: Support Services availability may vary by product and country.
HPE Support Services are sold by Hewlett Packard Enterprise and Hewlett Packard Enterprise Authorized Service Partners:
Services for customers purchasing from Hewlett Packard Enterprise or an enterprise reseller are quoted using Hewlett
Packard Enterprise order configuration tools.
Customers purchasing from a commercial reseller can find HPE Support Services at
week for assistance on resolving issues - hardware onsite response within four hours and software call back within two hours after opening your case. Three years' coverage recommended with HPE Support
week for assistance on resolving issues - hardware onsite response within four hours and software call back within two hours after opening your case. Three years' coverage recommended with HPE Support
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Service and Support,
HPE Support, and Warranty Information
Page 9
Drives Installed in a 1U
Mount Kit. The HPE Rack Mount Kit Support Service covers the all
54496
Important Notice for
NOTE: These services do not apply to Internal Tape Drives because they
html
Recommended
HPE Installation Service
For smooth startup and better business outcomes, HPE Hardware Installation - this service provides
https://www.hpe.com/h20195/v2/GetPDF.aspx/5981-9356ENE.pdf
eSupport
HPE eSupport is a portfolio of technology-based services that assist you with managing your business
Deployment
Rack Mount Kit
possible configurations of Tape Drives. Hence the services for 1U Rack Mount Kit covers all encumbering drives.
Please follow the following url for the correct Support Services and descriptions:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c041
Internal Tape Drives Installed in an HPE Server
do not have support associated with them if they are mounted in an HPE Server. HPE Server support covers all enclosed drives.
Please follow the following url for the correct Support Services and descriptions: For ProLiant use:
http://h18000.www1.hpe.com/products/QuickSpecs/ProductBulletin. html
For BCS use:
http://h18000.www1.hpe.com/products/QuickSpecs/ProductBulletin.
initial hardware installation of your product into your technology environment (system configuration is not included). In today's new era of business technology- customers can trust the services professionals at Hewlett Packard Enterprise to work collaboratively with them, putting our strategic and technical know-how to work across their entire infrastructure.
Allows your IT resources to stay focused on their core tasks and priorities
Reduces implementation time, impact and risk to your storage environment
environment - from the desktop to the data center.
Support Portal The Hewlett Packard Enterprise support portal provides one-stop access to the information, tools and services you need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires a Hewlett Packard Enterprise service agreement. To access the support portal, visit: http://www.hpe.com/support
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Service and Support,
HPE Support, and Warranty Information
Page 10
Customer Technical
HPE Education Services
time away from business-critical activities.
HPE Services Awards
HPE Technology Services continues to be recognized for service and support excellence by customers,
our services team's dedications, technical expertise, professionalism and uncompromising commitment to customer satisfaction.
Additional Services
To learn more on HPE ProLiant servers, HPE BladeSystem servers and HPE storage products, please
Training
Information
In today's cost-conscious business environment, IT professionals, developers, consultants and users face an interesting challenge: how to keep up with the latest technologies and expand important skills while delivering profitable results on current projects. To help address this challenge, Hewlett Packard Enterprise offers innovative training solutions that help keep you up-to-date on virtualization, server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related topics-while spending less
partners, industry organizations and publications around the world. Recent honors and award reflect
contact your Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hpe.com/services/proliant or
http://www.hpe.com/services/bladesystem or http://www.hpe.com/services/storage
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Opti
ons
Page 11
HPE LTO Ultrium Half-Height Tape Drives
Model Name/Kit Contents Description
Part Number
HPE StoreEver LTO-8 Ultrium 30750 Internal Tape Drive
BC022A
HPE StoreEver LTO-8 Ultrium 30750 Internal Tape Drive
0D1 will appear after this part number on your sales order if factory
integration is indicated.
HPE StoreEver LTO-8 Ultrium 30750 TAA-compliant SAS Internal Tape Drive
BC024A
0D1 will appear after this part number on your sales order if factory
integration is indicated.
HPE StoreEver LTO-8 Ultrium 30750 External Tape Drive
BC023A
appear after this part number on your sales order if factory
integration is indicated.
LTO-7 Ultrium 15000 SAS Internal
HPE StoreEver LTO-7 Ultrium 15000 Internal Tape Drive
BB873A
LTO-7 Ultrium 15000
0D1 will appear after this part number on your sales order if factory
integration is indicated.
HPE StoreEver LTO-7 Ultrium 15000 TAA-compliant Internal Tape Drive
BB953A
ctory
integration is indicated.
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive
BB874A
Veritas Backup Exec Promotion
HPE LTO-8 Ultrium 30 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE:
HPE StoreEver LTO-8 Ultrium 30750 Internal Tape Drive
Veritas Backup Exec Promotion
HPE LTO-8 Ultrium 30 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE:
tape drives
HPE StoreEver LTO-8 Ultrium 30750 External Tape Drive
Veritas Backup Exec Promotion
HPE LTO-8 Ultrium 30 TB RW Data Cartridge
mini-SAS High Density to SFF8088 cable
Documentation
NOTE: 0D1 will
Veritas Backup Exec Promotion
HPE LTO-7 Ultrium 15 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE:
HPE StoreEver LTO-7 Ultrium 15000 Internal Tape Drive
Veritas Backup Exec Promotion
HPE LTO-7 Ultrium 15 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE: 0D1 will appear after this part number on your sales order if fa
HPE StoreEver LTO-7 Ultrium 15000 External Tape Drive Veritas Backup Exec Promotion
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Options
Page 12
0D1 will appear after this part number on your sales order if factory
integration is indicated.
LTO-6 Ultrium 6250
LTO-6 Ultrium 6250 SAS Internal
HPE StoreEver LTO-6 Ultrium 6250 Internal Tape Drive
EH969A
Veritas Backup Exec Promotion
0D1 will appear after this part number on your sales order if factory
integration is indicated.
LTO-6 Ultrium 6250 SAS External
HPE StoreEver LTO-6 Ultrium 6250 External Tape Drive
EH970A
Veritas Backup Exec Promotion
Documentation
LTO-5 Ultrium 3000
LTO-5 Ultrium 3000 SAS Internal
HPE StoreEver LTO-5 Ultrium 3000 SAS Internal Tape Drive
EH957B
Veritas Backup Exec Promotion
our sales order if factory
integration is indicated.
LTO-5 Ultrium 3000 SAS External
HPE StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive
EH958B
Veritas Backup Exec Promotion
Documentation
Host Bus Adapters,
HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller
804398-B21
NOTE: Recommended SAS HBA for connecting External LTO Ultrium tape drives to Gen10 ProLiant servers.
HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller
804394-B21
NOTE: Recommended SAS HBA for connecting Internal LTO Ultrium tape drives to Gen10 ProLiant servers.
HPE H241 12Gb 2-ports Ext Smart Host Bus Adapter
726911-B21
NOTE: Recommended SAS HBA for connecting External LTO Ultrium tape drives to Gen9 ProLiant servers.
HPE H240 12Gb 2-ports Int Smart Host Bus Adapter
726907-B21
NOTE: Recommended SAS HBA for connecting Internal LTO Ultrium tape drives to
tape drives
HPE LTO-7 Ultrium 15 TB RW Data Cartridge
mini-SAS High Density to SFF8088 cable
Documentation
NOTE:
HP LTO-6 Ultrium 6.25 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE:
HP LTO-6 Ultrium 6.25 TB RW Data Cartridge
power cord
mini-SAS High Density to SFF8088 cable
tape drives
Controllers, and Accessories for ProLiant Servers
HP LTO-5 Ultrium 3 TB RW Data Cartridge
mini-SAS SFF8482 to SFF8087 cable
Documentation
NOTE: 0D1 will appear after this part number on y
HP LTO-5 Ultrium 3 TB RW Data Cartridge
power cord
mini-SAS High Density to SFF8088 cable
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Options
Page 13
Gen9 ProLiant servers.
HPE H222 Host Bus Adapter
650926-B21
NOTE: Recommended SAS HBA for connecting LTO Ultrium tape drives to Gen8
HPE Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller
631667-B21
NOTE: SAS HBA for connecting LTO Ultrium tape drives to Gen8 ProLiant servers.
Media
HPE LTO1 Ultrium 200GB RW Data Tape
C7971A
NOTE: Write and read support for Ultrium 230, Ultrium 232, Ultrium 448 and Ultrium 460. Read support for Ultrium 920 and Ultrium 960.
HPE LTO2 Ultrium 400GB RW Data Tape
C7972A
NOTE: Write and read support for Ultrium 448, Ultrium 460, Ultrium 920 and Ultrium 960. Read support for LTO-4 Ultrium1840 and Ultrium 1760.
HPE LTO-3 Ultrium 800 GB Re-writable Data Cartridge
C7973A
NOTE: Write and read only support for Ultrium 920 and Ultrium 960, LTO-4
5 Ultrium 3280 and Ultrium
3000.
HPE LTO-3 Ultrium 800 GB WORM Data Cartridge
C7973W
NOTE: This data cartridge supports Write-Once recording format for LTO-3 and
to this data cartridge cannot be overwritten.
HPE LTO4 Ultrium 1.6TB Read/Write Data Cartridge
C7974A
NOTE: Write and read support for LTO-4 Ultrium 1840, LTO-4 Ultrium 1760, LTO­5 Ultrium 3280 and LTO-5 Ultrium 3000.
HPE LTO4 Ultrium 1.6TB WORM Data Tape Cartridge
C7974W
NOTE: This data cartridge supports Write-Once Read-Many recording format for
overwritten.
HPE LTO-5 Ultrium 3TB RW Data Cartridge
C7975A
NOTE: Write and read support for LTO-5 Ultrium 3280 and Ultrium 3000.
HPE LTO-5 Ultrium 3TB WORM Data Cartridge
C7975W
NOTE: This data cartridge only supports Write-Once Read-Many recording format for LTO-5 drives. Data recorded to this data cartridge cannot be overwritten.
HPE LTO-6 Ultrium 6.25TB MP RW Data Cartridge
C7976A
NOTE: Write and read support for LTO-6 Ultrium 6650 and Ultrium 6250.
HPE LTO-6 Ultrium 6.25TB BaFe RW Data Cartridge
C7976B
NOTE: Write and read support for LTO-6 Ultrium 6650 and Ultrium 6250.
HPE LTO-6 Ultrium 6.25TB MP WORM Data Cartridge
C7976W
NOTE: This data cartridge only supports Write-Once Read-Many recording format for LTO-6 drives. Data recorded to this data cartridge cannot be overwritten.
HPE LTO-6 Ultrium 6.25TB BaFe WORM Data Cartridge
C7976BW
NOTE: This data cartridge only supports Write-Once Read-Many recording format for LTO-6 drives. Data recorded to this data cartridge cannot be overwritten.
HPE LTO-7 Ultrium 15TB RW Data Cartridge
C7977A
NOTE: Write and read support for LTO-7 Ultrium 15000.
HPE LTO-7 Ultrium WORM Data Cartridge
C7977W
ProLiant servers.
Ultrium 1840 and Ultrium 1760. Read support for LTO-
LTO-4 drives, and Read-Many for LTO-3, LTO-4 and LTO-5 drives. Data recorded
LTO-4 and LTO-5 drives. Data recorded to this data cartridge cannot be
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Options
Page 14
NOTE: This data cartridge only supports Write-Once Read-Many recording format for LTO-7 drives. Data recorded to this data cartridge cannot be overwritten.
HPE LTO-8 Ultrium 30TB RW Data Cartridge
Q2078A
NOTE: Write and read support for LTO-8 Ultrium 30750.
HPE LTO-8 Ultrium 30TB WORM Data Cartridge
Q2078W
NOTE: This data cartridge only supports Write-Once Read-Many recording format for LTO-8 drives. Data recorded to this data cartridge cannot be overwritten.
HP LTO-1 Ultrium 200GB Storage Media Kit
C8013A
HP LTO-2 Ultrium 400GB Storage Media Kit
C8014A
HPE Ultrium Universal Cleaning Cartridge
C7978A
Rack-mount Options
HPE StoreEver 1U Generic Rack Mount Kit
BC029A
NOTE: For racked servers. No drives included. Accommodates up to two internal
https://www.hpe.com/storage/1Urackmount
Cables and Adapters
HPE StoreEver 4m Mini SAS HD (SFF-8644) LTO Drive Cable for 1U Rack Mount Kit
876805-B21
NOTE: Use this cable to connect HPE LTO-5, 6, 7 and 8 SAS internal tape drives to Mini SAS HD (SFF-8644) connectors.
HPE StoreEver 4m Mini SAS (SFF-8088) LTO Drive Cable for 1U Rack Mount Kit
876804-B21
NOTE: Use this cable to connect HPE LTO-5, 6, 7 and 8 SAS internal tape drives to SAS (SFF-8088) connectors.
HP 1m SAS Cable
AE490A
NOTE: Use this cable to connect HPE LTO-2, 3 and 4 SAS internal tape drives to SAS 4i (SFF8484) connectors.
HP 1m with Power SAS Cable
AE491A
NOTE: Use this cable to connect HPE LTO-5 internal tape drives to SAS 4i (SFF8484) connectors.
HPE Mini-SAS Cable for LTO Internal Tape Drive
AP746A
NOTE: Use this cable to connect HPE LTO Ultrium internal tape drives to Mini-SAS (SFF8087) ports.
HP SAS External-Min 1x-2M Cable Assembly Kit
AE466A
NOTE: Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with Infiniband (SFF8470) connectors.
HP 1U SAS Ext-Min 1x-4M Cable Assembly Kit
AE468A
NOTE: Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with Infiniband (SFF8470) connectors.
HPE SAS Min-Min 1x-2M Cable Assembly Kit
AE470A
NOTE: Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088) connectors.
HPE SAS MIN-MIN 1X-4M Cable Assembly Kit
AE465A
NOTE: Use this cable to connect HPE SAS external tape devices to HPE SAS controllers with external Mini-SAS (SFF8088) connectors.
HPE 2.0m External Mini SAS High Density to Mini SAS Cable
716191-B21
NOTE: Use this cable to connect HPE SAS external LTO tape devices to HPE SAS
SAS half-height drives (such as LTO-5 Ultrium 3000, LTO-6 Ultrium 6250, LTO-7 Ultrium 15000 or LTO-8 Ultrium 30750).
NOTE: Please refer to the 1U Rack-mount Kit web page for further information:
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Options
Page 15
controllers with external Mini-SAS high density connectors as used by HPE E208e­p or H241 Host Bus Adapters.
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Technical Specifica
tions
Page 16
LTO-5 Ultrium
LTO-6 Ultrium
LTO-7 Ultrium
LTO-8 Ultrium
Dimensions
Form Factor
Physical (HxWxD) Inte
1.6 x 5.7 x 8.1 in
Physical (HxWxD) External
Physical (HxWxD) 1U Rack-mount
1.7 x 16.88 x 25.25 in
Shipping (HxWxD) Internal
7.9 x 9.4 x 11.4 in
Shipping (HxWxD) External
(24 x 31 x 39 cm)
Shipping (HxWxD) 1U Rack-mount
12.0 x 23.5 x 33.5 in
Weight
Out of box Internal
Out of box External
Out of box 1U Rack
Shipping Internal
Shipping External
Shipping 1U Rack
Shipping 3U Rack-mount
Capacity
Native
1.5 TB
2.5 TB
6 TB
12 TB
Compressed
(as compression for LTO compression for LTO
Buffer Size
Performance
Sustained transfer rate, native
Sustained transfer rate, compressed
(assumes 2:1 data compression for LTO-4 and 5; 2.5:1
rnal
-mount
3000
6250
(4.1 x 14.5 x 20.6 cm)
(7.7 x 22.3 x 29.5 cm)
(4.32 x 42.88 x 64.14 cm)
( 30.5 x 59.7 x 85.1 cm)
21.0 lb (9.52 kg) N/A
15000
5¼-inch half-height
3 x 8.8 x 11.7 in
(24 x 31 x 39 cm)
9.4 x 12.2 x 15.4 in
3.2 lb (1.45 kg)
10.3 lb (4.65 kg)
30750
N/A
N/A
-mount
32.9 lb (14.8 kg) N/A
sumes 2:1 data
-4 and 5; 2.5:1
3 TB 6.25 TB 15 TB 30 TB
-6 and higher) 256 MB 512 MB 1024 MB 1024 MB
140 MB/s 160 MB/s 300 MB/s 300 MB/s
280 MB/s 400 MB/s - -
5.1 lb (2.3kg)
11 lb (5 kg)
N/A
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Technical Specifications
17
compression for LTO-6 and higher)
Burst transfer rate
600 MB/s (with 6Gb/s SAS)
Data rate matching range
47-140 MB/s
54-160 MB/s
100-300 MB/s
100-300 MB/s
Data access time
(from BOT)
52 s typical for a 1.5
60 seconds for LTO
Average load time
>19s
24s
12s
15s
Average unload time
Rewind time from EOT
Rewind tape speed
9.0 m/s
Reliability
MTBF
250,000 hours
at 100% duty cycle
Uncorrected Error Rate
Media
LTO Ultrium 3
(Read and Write)
LTO Ultrium 4
(Read and write)
LTO Ultrium 5
(Read and write)
LTO Ultrium 8 (Read
Tape Format
Recording method
16-channel linear serpentine
32-channel linear serpentine
Recording format
LTO Ultrium 5
800 GB tape)
LTO Ultrium 6
1.5 TB tape)
LTO Ultrium 7
2.5 TB tape)
LTO Ultrium 8
LTO Ultrium 7 (for 6
TB tape)
Data compression
LTO DC dual mode compression (an enhanced version of ALDC)
Error detection/ correction
Read channel technology
Data encoding method
Interface
Interface type
6Gb/sec Dual Port SAS
SAS connector
SAS Internal: mini-SAS SFF8482
Power
Power requirements Internal
(including mount model)
Power requirements
100 to 240 VAC,
100 to 240 VAC,
100 to 240 VAC,
100 to 240 VAC,
Compatibility
(native)
TB tape (native)
19s 19s 17s 24s
(native)
50 seconds typical
for LTO 6 media
(native)
7 media
(native)
-
96s (1.5 TB tape) 98s (2.5TB tape) 114s (6TB tape) 114s
1 in 1x1017 bits 1 in 1x1019 bits
(Read only);
LTO Ultrium 4
(Read and Write);
LTO Ultrium 5
(Read only);
LTO Ultrium 5
(Read and Write);
LTO Ultrium 6
(Read only);
LTO Ultrium 6
(Read and Write);
LTO Ultrium 7
LTO Ultrium 7
(Read and Write);
and Write)
Specifications
LTO Ultrium 4 (for
Partial Response Maximum Likelihood (PRML)
5V@3.5A (typical)
+5V@3.7A (max)
rack-
+12V@0.7A
(typical)
+12V@1.9A (max)
50-60 Hz, auto-
Page
LTO Ultrium 5 (for
LTO Ultrium 6 (for
Reed-Solomon
RLL 32/33
SAS External: mini-SAS SFF8088
5V@3.5A (typical)
+5V@4.0A (max)
+12V@0.6A
(typical)
+12V@2.5A (max)
50-60 Hz, auto-
5V@4.0A (typical)
+5V@4.5A (max)
+12V@1.0A
(typical)
+12V@3.5A (max)
50-60 Hz, auto-
5V@4.0A (typical)
+5V@4.5A (max)
+12V@1.2A
(typical)
+12V@4.0A (max)
50-60 Hz, auto-
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Technical Specifications
18
External
ranging, 0.7A max
ranging, 0.8A max
ranging, 0.8A max
ranging, 0.8A max
Power consumption
7 Watts idle
34 Watts max
4.1 Watts idle
39 Watts max
Environmental
Temperature range
Operating:
5CFM airflow for Half-Height
Non-Operating: -40° F to 151° F (-40° C to 66° C, -40° C to 60° C for LTO-7)
Non-condensing
Operating: 20 to 80% RH (Non-condensing, max wet bulb temperature = 26C)
Non-Operating: 10 to 95% (90% for LTO-7)RH (Non-condensing, max wet bulb temperature = 26C)
Standards Compliance
CSA Certification to C22.2, No.60950 (cCSAus)
CB Certificate and Report (IEC 60950)
Front Panel LED
HPE LTO Ultrium 3 and 4 tape drives have four LED indicators on the front panel:
Ultrium Tape Drive "Getting Started Guide" for more information on how to use
Ultrium tape drive.
Specifications
24 Watts typical
24.5 Watts typical
50° F to 95° F (10° C to 35° C) if 6 CFM airflow is provided 50° F to 104° F (10° C to 40° C) if 8CFM airflow is provided for Full-Height,
humidity range
TÜV EN60950 (IEC 60950 and EN60950) CE Declaration of Conformity FCC 47 CFR Parts 15 NOM VCCI C-TICK RRL BSMI GOSH
11 Watts idle
31Watts typical
11 Watts idle
31Watts typical
Indicators
Ready
Drive
Tape
Clean
HPE LTO Ultrium 5, 6, 7 and 8 tape drives have five LED indicators on the front panel:
Ready
Drive
Tape
Clean
Encryption
Please consult your HPE these LED indicators for ascertaining drive status and for help in troubleshooting your HPE LTO
Page
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives

Summary of Changes

Page 19
Date
Version History
Action
Description of Change
02-Apr-2018
From Version 30 to 31
Changed
Service and Support section and Options were revised.
05-Feb-2018
From Version 29 to 30
Changed
Overview, Product Highlights, Compatibility, Options, and Technical Specifications were revised.
04-Dec-2017
From Version 28 to 29
Changed
Overview, Product Highlights, Compatibility, Options, and Technical Specifications were revised.
04-Sept-2017
From Version 27 to 28
Changed
Changes made throughout the QuickSpecs
07-Aug-2017
From Version 26 to 27
Changed
Changes made throughout the QuickSpecs
11-Jul-2017
From Version 25 to 26
Changed
Removed LTO-3 Ultrium 920 Tape Drives & Ultrium Full-Height Drives
11-Mar-2016
From Version 24 to 25
Changed
Changes made to the options section
19-Feb-2016
From Version 23 to 24
Changed
Changed a reference in the Option Section, Descriptions updated.
17-Dec-2015
From Version 22 to 23
Changed
Changes made in the Overview and standard features sections
01-Dec-2015
From Version 21 to 22
Changed
Changes made throughout the QuickSpecs
3-Apr-2015
From Version 20 to 21
Changed
Remove 0D1 for internal drives into rackmount kits, SKUs descriptions were updated.
7-Nov-2014
From Version 19 to 20
Changed
Changes made throughout the QuickSpecs.
9-May-2014
From Version 18 to 19
Removed
LTO-4 Ultrium 1840 Tape Drives were removed.
2-May-2014
From Version 17 to 18
Changed
Recommended Support was revised and Optional HPE Support Services was removed.
7-Mar-2014
From Version 16 to 17
Changed
Image correction.
21-Feb-2014
From Version 15 to 16
Changed
Added images.
23-Dec-2013
From Version 14 to 15
Changed
HPE StoreEver LTO-2 Ultrium 448 Tape Drives were removed Performance was revised for LTO-6 Ultrium 6650
13-Sep-2013
From Version 13 to 14
Changed
Changes were made to the following sections:
Technical Specifications
21-Dec-2012
From Version 12 to 13
Changed
Changes were made to the following sections:
Technical Specifications: updated Capacity section
4-Dec-2012
From Version 11 to 12
Changed
Changes made throughout the QuickSpecs.
19-Oct-2012
From Version 10 to 11
Changed
Change was made to URL in Service and Support, HPE Support, and Warranty Information section.
13-Aug-2012
From Version 9 to 10
Changed
Changes were made in Overview, Features, Product Highlights, Compatibility and Options sections.
28-Oct-2011
From Version 8 to 9
Added
HPE StoreOpen Standalone was added to Product Highlights.
23-Sep-2011
From Version 7 to 8
Changed
Updated the following: Linear Tape File Systems (LTFS) updated URL
8-Jun-2011
From Version 6 to 7
Removed
Removed StorageWorks throughout the document.
27-May-2011
From Version 5 to 6
Removed
HPE StorageWorks Ultrium 232 Tape Drive was removed.
29-Apr-2011
From Version 4 to 5
Changed
Updated the following: replaced "Go Connect" link with the "SPOCK" link throughout the entire document.
29-Oct-2010
From Version 3 to 4
Removed
Tape Array 5300 and Redundant, hot-swap power supply and fan for Tape Array 5300 were removed from Rack-mount Options.
27-Sep-2010
From Version 2 to 3
Changed
Key Features and Customer Benefits were moved into Features
Related was changed to Optional for the HPE Support Services that will
Product Highlights Service and Support Options
Options: updated part # COL98A in HPE LTO Ultrium Full Height Tape Drives
Software in the Box was changed to Included Software in Product Highlights
QuickSpecs
HPE StoreEver LTO Ultrium Tape Drives
Summary of Changes
20
enhance your HPE product experience descriptions and Customer
Part numbers were removed from Models
18-Jun-2010
From Version 1 to 2
Changed
Changes made within the Media section of Options.
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. shall not
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.
The only warranties for warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. errors or omissions contained herein.
For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.
c04123270
Technical Training, HPE Service Awards and Additional Services Information were completely revised in Service and Support, HPE Support and Warranty Information Software was changed to Upgrade included software to Data Protector Express in Options Value was added to Customer Benefits HPE Data Protector Express Basic was added to Backup Software Support
for Hewlett Packard Enterprise products and
be liable for technical or editorial errors or omissions contained herein.
Hewlett Packard Enterprise products and services are set forth in the express
Hewlett Packard Enterprise shall not be liable for technical or editorial
- 13572 - Worldwide - V31 - 2-April-2018
Page
Hewlett Packard Enterprise
Loading...