HPE AF430A Quick Start Guide
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
R7000 Uninterruptible Power System (UPS)
Overview
The innovative Minimally Switched Technology used in the new HP R7000 UPS improves the performance over traditional lineinteractive UPS designs while reducing the cost, weight, and size of traditional double-conversion online UPS designs. The digital signal
processing (DSP) enables complete digital control of the UPS resulting in increased power conditioning, lower system cost, and
enhanced user interface interactivity.
DSP technology enables the practical implementation of sophisticated UPS topologies and controls. The DSP can simultaneously control
multiple power converters to optimize system efficiency and other performance characteristics such as: enhanced battery management
for extended battery life, and improved output voltage regulation. The result is a higher performance UPS in smaller, lighter, more
reliable designs-an advantage for space-constrained equipment racks and cost conscious, co-located data center applications.
Front View:
1.
Escape Button
2.
Scroll up button
3.
Scroll down button
4.
Enter/Select button
5.
Power button
Rear View:
1.
Load segment 1 circuit breaker (controls L6-30R receptacle
for NA/JPN, Item 3)
2.
Load segment 2 circuit breaker (controls L6-30R receptacle
for NA/JPN, Item 15)
3.
Large output NEMA L6-30R receptacle (NA/JPN) or IEC-60309
32A receptacle on short cords (INTL) associated with load
segment 1
4.
Cord retention clip attachment locations
5.
Load segment 1 circuit breaker (controls the C19 receptacles,
but does not control the large output receptacle)
6.
3 x IEC C19 receptacles on load segment 1
7.
HP UPS Network Module
8.
Input power line cord with NEMA CS8265C plug (NA/JPN) or
IEC-309-32A plug (INTL)
9.
Ground bonding screw
10.
Serial communications port
11.
USB communications port
12.
REPO port
13.
3 x IEC C19 receptacles on load segment 2
14.
Load segment 2 circuit breaker (controls the C19 receptacles,
but does not control the large output receptacle)
DA - 14110 Worldwide — Version 5 — August 23, 2013
Page 1
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
R7000 Uninterruptible Power System (UPS)
Overview
15.
Large output NEMA L6-30R receptacle (NA/JPN) or IEC-60309
32A receptacle on short cords (INTL) associated with load
segment 2
16.
ERM communication port
17.
ERM connector for the large plug on the split ERM cable
Models
NOTE:
#0D1 will appear after the part number on the sales order if HP factory integration is indicated.
HP R7KVA 4U 50A High Voltage NA/JP Uninterruptible Power System
HP R7KVA 4U IEC-32A High Voltage INTL Uninterruptible Power System
Kit Contents
HP UPS R7000
HP UPS Network Module
Power Products Documentation CD
Depth adjustable fixed rack mounting rails, mounting brackets, cord retention clips
Communications cable
Two 7xC13 Extension Bars
AF462A
AF463A
DA - 14110 Worldwide — Version 5 — August 23, 2013
Page 2
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Standard Features
Key Features
4U Power Packed Design
Rated at unity power at 7200VA /7200W for the NA/Japan model, and 6500VA/6500W on the international
model, the HP UPS R7000 packs more power in space-conserving rack-mount design, allowing you to
support more critical equipment in your rack.
R7000 Uninterruptible Power System (UPS)
High power density with up to 7200
VA /7200 Watts of power packed in just 3U rack space
Greater system uptime with support for Extended Runtime Modules (ERM)
Easy configuration through enhanced front panel display
Enterprise-wide intelligent manageability with bundled UPS Network Module and HP Power
Protector software
More efficient voltage regulation with revolutionary technology
Ultimate long-term battery reliability with HP Enhanced Battery Management
Enhanced system flexibility with two independently controlled load segments
Support for Remote Emergency Power Off (REPO) circuitry
Easy serviceability through modular design
Hot-Swappable Battery
Backed by a three year warranty with the first year including parts and labor. HP's Pre-Failure
warranty, and a $250,000 load protection guarantee*. (Certain restrictions and exclusions apply;
*Load protection guarantee available in North America only.
Optional Extended Runtime Modules (ERM) increase batter runtime during a power failure
)
Increase System Uptime
with Extended Runtime
Modules
Lower Cost of Ownership
with Innovative
Technology
Investment Protection
with HP Enhanced Battery
Management
Enhanced Flexibility
The Extended Runtime Modules are rack mounted battery modules that occupy 3U (5.25 inches) of rack
space. The HP UPS R7000 supports up to four Extended Runtime Modules (ERM), which extend your overall
battery runtime.
The HP UPS R7000 utilizes a the Digital Signal Processing industry-leading technology that continually
conditions and regulates power without using the battery, thereby increasing the life of the battery. The
output voltage is automatically regulated, based on the connected load and the input voltage.
HP UPS R7000 incorporates Enhanced Battery Management: an exclusive, patented technology that
doubles battery service life, optimizes battery recharge time, and provides advance notice of pending
battery failure. With Enhanced Battery Management, you can save 2-3 battery replacements over the life
of the UPS saving hundreds of dollars giving you a lower total cost of ownership while still receiving the
power protection for your critical equipment.
Six C19 outlets, and two L6-30 outlet (2x 32A IEC on the International model) provide a wide range of
connection options. Two included Extension Bars provide an addition 14 C13 outlets if needed. Adding
additional HP PDU Extension Bars, AF500A, provides additional C13 outlets making the R7000 and
extremely flexible UPS for all environments.
DA - 14110 Worldwide — Version 5 — August 23, 2013
Page 3
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Standard Features
Remotely Monitor UPSs on
the Network
Easy Configuration via
Enhanced Front Panel
Display
Independently
Controllable Load
Segments
Ease of Maintenance with
Hot-Swappable Batteries
and Electronics Modules
The installed UPS Network Module enables network administrators to remotely monitor UPSs and reboot
network devices. It provides SNMP functionality, including power event alerts, network power diagnostics,
and remote UPS reboot and testing. Used in conjunction with HP Systems Insight Manager or other SNMP
capable Network Management Software, power-related problems on the network are quickly discovered
and remedied.
LCD system integrated into the front panel with five button controls (three buttons for UPS power control
and one button under the front bezel for configuration)
With two load segments, you have the flexibility to configure scheduled startups and shutdowns, in
addition to independently control the separate load segments. Working in conjunction with HP UPS
Network Module, the HP UPS R7000 can be configured to extend the runtime for more critical devices.
The UPS R7000 is modular in design, and both the battery and the electronics modules are hot swappable.
HP UPSs are designed with simple access through the front panel. Users can safely install new batteries
without ever powering down connected server and server options.
R7000 Uninterruptible Power System (UPS)
Extended Runtime Module
(ERM), R7000
HP Quality
Compatibility
Warranty
The UPS R7000 supports up to four Extended Runtime Modules. Each module is 3U (5.25 inches), a rack
mountable battery module that extends your overall battery runtime.
HP's hardware qualification is the toughest in the industry. Extensive evaluation, testing, product
improvement, and an unsurpassed warranty guarantee the highest level of system protection, electrical
performance, product quality and compatibility.
Compatible with all HP servers, storage, racks, rack options, and other rack mountable HP equipment. For
PDU options please refer to the UPS/PDU compatibility matrix on
The HP UPS R7000 is covered by a three year warranty, with the first year including parts and labor. Also,
standard on all HP UPS units, is our exclusive Battery Pre-Failure Warning which extends the advantage of
a HP three-year, limited warranty by applying it to the battery before it actually fails. This warranty is
offered worldwide. Specifically, the Pre-Failure Battery Warranty ensures that when customers receive
notification from the HP UPS Network Module that the battery may fail, the battery is replaced free of
charge under the warranty.
All HP Rackmount UPSs are also automatically covered to the full service level of ProLiant Care Packs in the
same rack so there is no need to purchase additional Care Packs for the UPSs. Batteries are not covered
under Care Pack Coverage
NOTE:
$250,000 Computer/Load Protection Guarantee is also provided in NA, in addition to the HP three
year, limited warranty.
www.hp.com/products/ups
.
DA - 14110 Worldwide — Version 5 — August 23, 2013
Page 4
Loading...