HPE Rackmountable 3 Phase Uninterruptible Power Systems
Overview
HPE Rackmountable 3 Phase Uninterruptible Power Systems
(UPS R8000/3 and R12000/3)
Crowded data centers and racks filled to capacity with storage devices, monitors, servers, communications devices, and other
equipment are driving the need for uninterruptible power with increased power density and power efficiency. The
3 Phase
Uninterruptible Power Systems provide just that. These rack
ms provide up to 12,000 watts
(W) of power in a 6-U rack form factor. This equates to 2 KW per U space, which leads the industry in power density. The UPS
R8000/3 and the R12000/3 use digital signal processing and a new On
to answer the demands
for increased power density and power efficiency.
line
UPS when power fluctuates beyond acceptable limits. Hot swappable batteries and electronics modules and an automatic bypass
reduce MTTR (mean time to repair) – down time in the event service is needed.
UPS R8000/3 and R12000/3 front view
UPS R8000/3 and R12000/3 rear view
Battery compartment (behind bezel)
Communications terminal block
Status and alarm LED display
Electronics module compartment (behind bezel)
Input/output location R8000/3, input location R12000/3 1
Output connector R12000/3
Extended Options provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value. Fully integrated into the HPE management and security experience, Extended Options
represent great value and performance but typically have a longer lead-time.
HPE
-mountable Uninterruptible Power Syste
-line On Demand hybrid technology
-line On Demand combines the efficiency of a line interactive UPS, up to 97%, with the stability of a double conversion on-
HPE Rackmountable 3 Phase Uninterruptible Power Systems
HPE R8000/3 8000kVA Three Phase NA 6U Rackmount Uninterruptible Power System (Extended)
HPE R8000/3 8000kVA Three Phase INTL 6U Rackmount Uninterruptible Power System (Extended)
HPE R12000/3 12000VA Three Phase NA 6U Rackmount Uninterruptible Power System (Extended)
HPE R12000/3 12000VA Three Phase INTL 6U Rackmount Uninterruptible Power System (Extended)
HPE Rackmountable 3 Phase Uninterruptible Power Systems
Standard Features
• Unity Rated, volt amperage out equals wattage out
swappable battery and electronics modules provide ease of maintenance and faster time
failure warranty
and a load protection guarantee in North America
Superior Battery
Management
HPE UPS HPE 3 Phase UPS incorporates Enhanced Battery Management: an exclusive, patented
technology that doubles battery service life, optimizes battery recharge time, and provides advance
notice of pending battery failure. With Enhanced Battery Management, you have a lower total cost of
ownership and receive the best in the industry protection for your critical equipment.
Ease of serviceability
through hot
batteries and electronics
modules.
The HPE 3 Phase UPSs have a modular design architecture, consisting of separate, hot swappable
battery and electronics modules. Further, a built-in intelligent automatic bypass feature ensures
continuous power to your connected load even while the modules are being replaced. Ease of
maintenance and serviceability
• Increased flexibility through modular design
Increase battery back-up
time with up to four
Extended Runtime
Modules
HPE 3 Phase UPS supports a maximum of four Extended Runtime Modules (ERM), to further increase
your battery back
be automatically detected and configure when attached to the UPS. For more information on battery
backup
Multiple management
options increase
flexibility
The HPE 3 Phase UPS systems can be fully configured and monitored from the front management LCD.
For remote management the
UPS Management Module is included at no charge and provides
additional features such as out of band communications with up to 5 servers and UPS clustering for
redundancy.
Remote Emergency
Power Off Feature
The HPE 3 Phase UPS includes an isolated REPO (Remote Emergency Power Off) port. The REPO
feature allows the power to the UPS outlets to be switched off from a remote location. For more
information, refer the HPE 3 Phase UPS user’s manual.
The HPE UPS Management Module enables you to monitor and manage power environments through
comprehensive control of
UPS Management Module can support either a single
UPS configuration or provides additional power protection with support for dual redundant UPS
configuration for no
failure. The additional serial ports will provide greater power
management
The management module can be configured to send alert traps to
Systems Insight Manager and
other SNMP management programs or used as a standalone management system. This flexibility
• Highest wattage per U space. Up to 12000 VA/12KW in only 6U
• Industry leading efficiency with On-line On Demand hybrid technology
• Attached line cords for easier and faster connection to your facility power
• Hot-
to repair (MTTR)
• Industry leading efficiency with On-line On Demand hybrid technology
• Attached line cords for easier and faster connection to your facility power
• Extra-long battery life with Enhanced Battery Management (EBM)
• Extended battery run time with optional Extended Runtime Modules (ERMs)
• Easy configuration through enhanced front panel display or HPE
(included)
• Backed by a limited three-year warranty, the Hewlett Packard Enterprise pre-
-swappable
• Faster time to repair (MTTR)
• Automatic and manual bypass
times, please refer to the Back-up Times Chart.
-up time, should you have a sudden brief power outage. Each ERM is 3U high and can
HPE
HPE UPSs. The HPE
control and flexible monitoring.
-single-point-of-
HPE