HPE 798156-B21 Getting Started Guide
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Overview
Page 1
HPE ProLiant XL190r Gen9 Server
The ProLiant XL190r Gen9 Server is a 2U half-width, 2 processor server with the same configuration options as the XL170r for CPU
and memory, but has additional PCIe slots in multiple configurations providing support for add
support for two (2) integrated accelerators per server (GPUs or Coprocessors).
This server leverages Intel’s latest Xeon E5
DDR4 HPE Smart
over previous generation servers.
The dense and flexible HPE Apollo 2000 Chassis can accommodates up to two 2U hot
while lowering TCO.
Rack scale power efficiency is fueled by the optional Advanced Power Management for rack, chassis, server and component level
management
Item
Description
Item
Description
1
Bayonet board slot
10
Dedicated iLO port connector
2
DIMMs for processor 2
11
NMI header
3
DIMMs for processor 1
12
PCIe x16 riser board connector*
4
PCIe x40 riser board connector*
13
microSD slot
5
System maintenance switch
14
System battery
6
Mini-SAS connector 1 (SATA x4)
15
M.2 SSD riser connector
7
Internal USB 3.0 connector
16
TPM connector
8
Mini-SAS connector 2 (SATA x4)
17
Processor 1
9
PCIe x24 riser board connector*
18
Processor 2
itional expansion cards and future
-2600 v3 and E5-2600 v4 series processors increasing performance up to 30-40%, and
Memory, at speeds of up to 2133 MHz and 512GB maximum which boosts bandwidth and efficiency up to 50%
-swap server trays to meet workload needs
Front View
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Overview
Page 2
2U Node Rear Panel Components
Item
Description
Item
Description
1
Node serial number and iLO label pull tab
4
Dedicated iLO port (optional)
2
SUV connector
5
NIC connector 1
3
USB 3.0 connector
6
NIC connector 2
Single-Slot 2U Node PCI Riser Cage Assembly
Item
Form factor
Slot number
Slot description
1
Storage controller / Low-profile
PCIe card
1
PCIe3 x16 (16, 8, 4, 1) for Processor 1
Riser Cage Assembly
800293-B21
HPE XL190r Gen9 LP PCIex16 L Riser Kit Single-Slot 2U Node PCI
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Overview
Page 3
Single-slot left PCI riser cage assembly
Item
Form factor
Slot number
Slot description
1
Storage controller or low-profile PCIe NIC card
1
PCIe3 x16 (16, 8, 4, 1) for Processor 1
FlexibleLOM 2U node riser cage assembly
798184-B21
Item
Form factor
Slot number
Slot description
1
FlexibeLOM
FlexibleLOM slot
PCIe x8 for Processor 1
2
Storage controller or accelerator card
2
PCIe3 x16 (16, 8, 4, 1) for Processor 1
NOTE: When using a P840/841 or a Low-Profile card in Slot 2, the maximum operating temperature is 20C.
2. With E5-16x0v3 processor, the maximum operating temperature is 23C
HPE XL190r Gen9 x16 FLOMx8 R Riser Kit
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Overview
Page 4
Three-slot PCI riser cage assembly
Item
Form factor
Slot number
Slot description
1
Accelerator Card
3
PCIe3 x16 (16, 8, 4, 1) for Processor 1
Storage controller or low-profile PCIe
NIC card
3
Accelerator Card
4
PCIe3 x16 (16, 8, 4, 1) for Processor 2
HPE XL190r x16x16x16 11OS R Riser Kit
798186-B21
Item
Form factor
Slot number
Slot description
1
Accelerator Card
3
PCIe3 x16 (16, 8, 4, 1) for Processor 2
3
Accelerator Card
4
PCIe3 x16 (16, 8, 4, 1) for Processor 2
HPE XL190r Gen9x16x16x16 GD R Riser Kit
798188-B21
2
2 PCIe3 x16 (16, 8, 4, 1) for Processor 2
Three-slot GPU-direct PCI riser cage assembly
2
Storage controller or low-profile PCIe
NIC card
2 PCIe3 x16 (16, 8, 4, 1) for Processor 2
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Overview
Page 5
Three-slot GPU-direct with re-timer PCI riser cage assembly
Item
Form factor
Slot number
Slot description
1
Accelerator Card
3
PCIe3 x16 (16, 8, 4, 1) for Processor 2
Storage controller or low-profile PCIe
NIC card
3
Accelerator Card
4
PCIe3 x16 (16, 8, 4, 1) for Processor 2
HPE XL190r Gen9 GD-RT R Riser Kit
827353-B21
2
2 PCIe3 x16 (16, 8, 4, 1) for Processor 2
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Standard Features
Page 6
NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory Integrated Models" section.
Processor
E5-2600 v3 series Processors
Model
CPU frequency
Cores
L3 Cache
Power
QPI
DDR4 MHz
E5-2699v3
2.3GHz
18
45MB
145W
9.6GT/s
2133
E5-2698v3
2.3GHz
16
40MB
135W
9.6GT/s
2133
E5-2697v3
2.6GHz
14
35MB
145W
9.6GT/s
2133
E5-2695v3
2.3GHz
14
35MB
120W
9.6GT/s
2133
E5-2690v3
2.6GHz
12
30MB
135W
9.6GT/s
2133
E5-2683v3
2.0GHz
14
35MB
120W
9.6GT/s
2133
E5-2680v3
2.5GHz
12
30MB
120W
9.6GT/s
2133
E5-2670v3
2.3GHz
12
30MB
120W
9.6GT/s
2133
E5-2667v3
3.2GHz
8
20MB
135W
9.6GT/s
2133
E5-2660v3
2.6GHz
10
25MB
105W
9.6GT/s
2133
E5-2650v3
2.3GHz
10
25MB
105W
9.6GT/s
2133
E5-2650Lv3
1.8GHz
12
25MB
65W
9.6GT/s
2133
E5-2643v3
3.4GHz
6
20MB
135W
9.6GT/s
2133
E5-2640v3
2.6GHz
8
20MB
90W
8.0GT/s
1866
E5-2637v3
3.5GHz
4
15MB
135W
9.6GT/s
2133
E5-2630v3
2.4Ghz
8
20MB
85W
8.0GT/s
1866
E5-2630Lv3
1.8GHz
8
25MB
55W
8.0GT/s
1866
E5-2620v3
2.4GHz
6
15MB
85W
8.0GT/s
1866
E5-2609v3
1.9GHz
6
15MB
85W
8.0GT/s
1600
E5-2603v3
1.6GHz
6
15MB
85W
6.4GT/s
1600
Processor
E5-2600 v4 series Processors (Please follow product offering to fill out processor SKU)
Model
CPU frequency
Cores
L3 Cache
Power
QPI
DDR4 Hz
E5-2603v4
1.7GHz
6
15MB
85W
9.6GT/s
1866
E5-2609v4
1.7GHz
8
20MB
85W
9.6GT/s
1866
E5-2620v4
2.1GHz
8
20MB
85W
9.6GT/s
2133
E5-2623v4
2.6GHz
4
10MB
85W
9.6GT/s
2133
E5-2630Lv4
1.8GHz
10
25MB
55W
9.6GT/s
2133
E5-2630V4
2.2GHz
10
20MB
85W
9.6GT/s
2133
E5-2637V4
3.5HGz
4
15MB
135W
9.6GT/s
2133
E5-2640V4
2.4GHz
10
25MB
90W
9.6GT/s
2400
E5-2643V4
3.4GHz
6
20MB
135W
9.6GT/s
2400
E5-2650LV4
1.7GHz
14
35MB
65W
9.6GT/s
2400
E5-2650V4
2.2GHz
12
30MB
105W
9.6GT/s
2400
E5-2660V4
2.0GHz
14
35MB
105W
9.6GT/s
2400
One of the following
depending on Model
One of the following
depending on Model
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Standard Features
Page 7
E5-2667V4
3.2GHz
8
25MB
135W
9.6GT/s
2400
E5-2680V4
2.4GHz
14
35MB
120W
9.6GT/s
2400
E5-2683V4
2.1GHz
16
40MB
120W
9.6GT/s
2400
E5-2690V4
2.6GHz
14
35MB
135W
9.6GT/s
2400
E5-2695V4
2.1GHz
18
45MB
120W
9.6GT/s
2400
E5-2697V4
2.3GHz
18
45MB
145W
9.6GT/s
2400
E5-2698V4
2.2GHz
20
50MB
135W
9.6GT/s
2400
E5-2697AV4
2.6GHz
16
40MB
145W
9.6GT/s
2400
E5-2699V4
2.2GHz
22
55MB
145W
9.6GT/s
2400
Processor
E5-1600 v3 series Processors (Please follow product offering to fill out processor SKU)
Model
CPU frequency
Cores
L3 Cache
Power
DDR4 Hz
E5-1680v3
3.2GHz
8
20MB
140W
2133
E5-1650v3
3.5GHz
6
15MB
140W
2133
E5-1630v3
3.7GHz
4
10MB
140W
2133
HPE XL190r LP PCIex16 L Riser Kit - 800293-B21
Chipset
Intel® C610 Series Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
On System Management
HPE iLO (Firmware: HPE iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
Advanced ECC (multi-bit error protection)
Memory Online Spare Mode (Rank Spare Mode)
Memory
Type
HPE SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
DIMM Slots Available
16 DIMM Slots available
2TB (16 x 128GB)
2TB (16 x 128GB)
NOTE: HPE memory from previous generation servers are not fully compatible with the HPE
Depending on the memory configuration and processor model, the memory speed may run at
Memory Configuration Tool at: http://h22195.www2.hpe.com/MemoryTool/Home/Legal
Network Controller
Ethernet Options
HPE Ethernet 10Gb 2P 530SFP+ Adptr
One of the following
depending on Model
NOTE: : these processors are supported with the following risers kits.
• HPE XL190r Gen9 x16 FLOM x8 R Riser Kit 798184-B21
Processor
ProLiant XL190r Gen9 Server.
NOTE: To realize the performance memory capabilities listed in this document, HPE SmartMemory
isrequired. For additional information, please see the HPE SmartMemory QuickSpecs at:
https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04111535
NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server.
NOTE:
2400MHz, 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online
HPE Ethernet 1Gb 2P 332T Adptr
HPE Ethernet 1Gb 4-port 331T Adapter
HPE Ethernet 1Gb 2P 361T Adptr
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Standard Features
Page 8
HPE Ethernet 10Gb 2P 530T Adptr
FlexibleLOM options. Max operating temp is 23C ambient. Max operating temp is 23C ambient
HPE Server ROM
indicates the number of physical electrical lanes running to the connector.
• Processor and chipset status registers
HPE Ethernet 10Gb 2P 560SFP+ Adptr
HPE Ethernet 10Gb 2P 561T Adptr
HPE Ethernet 10Gb 2P 561FLR-T Adptr
HPE Ethernet 10G 2-port 546SFP+ Adptr
HPE 1Gb Ethernet 4P 331FLR Adptr
HPE Ethernet 1Gb 4-port 366FLR Adapter
HPE Ethernet 10Gb 2P 560FLR-SFP+ Adptr
HPE FlexFabric 10Gb 2P 534FLR-SFP+ Adptr
HPE FlexFabric 10Gb 2P 533FLR-T Adptr
HPE FlexFabric 10Gb 2P 556FLR-SFP+ Adptr
HPE FlexFabric 10Gb 4-port 536FLR-T Adapter
HPE FlexFabric 10Gb 2-port 536FLR-T Adapter
HPE Ethernet 10Gb 2P 546FLR-SFP+ Adptr
HPE Ethernet 10Gb 2-port 562SFP+ Adptr
HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adpt
HPE StoreFabric CN1200E-T 10Gb CAN
HPE StoreFabric CN1100R-T 10Gb CNA
InfiniBand Options
HPE IB FDR/EN 40Gb 2P 544+FLR-QSFP Adptr
HPE IB QDR/EN 10Gb 2P 544+FLR-QSFP Adptr
HPE IB FDR/EN 40Gb 2P 544+QSFP Adptr
HPE IB FDR 2P 545FLR-QSFP Adptr
HPE IB FDR 2P 545QSFP Adptr
QLogic 4X QDR IB PCI-e G2 HCA
HPE IB EDR/EN 100Gb 1P 840QSFP28 Adptr
HPE IB EDR/EN 100Gb 2P 840QSFP28 Adptr
HPE 100Gb 1p OP101 QSFP28 x16 OPA Adptr
HPE 100Gb 1p OP101 QSFP28 x16 OPA Adptr
Riser Options to support FlexibleLOM cards
HPE XL190r Gen9 LPx16 FLOMx8 R Riser Kit
NOTE: The HPE XL190r Gen9 LPx16 FLOMx8 R Riser Kit (798184-B21) is required to order the
NOTE:
* FHFLDW allows for cards up to 10.5” in Length
HPE ROM (Read Only Memory) is now digitally signed using the HPE Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and preventing
malicious efforts to corrupt system ROM.
HPE ROM provides for essential initialization and validation of hardware components before control is
passed to the customer-installed operating system. The ROM also provides the capability of booting
from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the
operating system.
HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early
phase of hardware initialization, suitable messages are now displayed on the connected monitor.
Additionally, these configuration or hardware errors are logged to the Integrated Management Log
(IML) to assist in diagnosis.
The HPE ProLiant ROM is used to configure the following:
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Standard Features
Page 9
• System memory, memory map, and memory initialization
http://www.hp.com/support/rbsu.
HPE Server Unified
The HPE ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI
Class 2 specifications which supports both legacy boot and UEFI boot operation. The
XL190r
operation.
NOTE:
properly to support UEFI.
NOTE:
the UEFI Information Library:
NOTE:
UEFI mode in the factory.
To modify the se
ProLiant POST screen to
enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English
language.
UEFI enables numerous new capabilities, including both industr
specific to
HPE
•
•
•
•
•
•
•
NOT
•
•
•
Storage Controller
Smart Array Controller
HPE Smart Array P840/4G Controller
• System hardware configuration (Integrated PCI devices and optional PCIe cards).
• Customer-specific BIOS configuration (using the HPE ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to the HPE RBSU (ROM based setup utility) user guide:
Extensible Firmware
Interface (UEFI) or
Legacy Mode
Gen9 defaults to UEFI boot operation and can be factory or field configured for Legacy boot
For UEFI boot operation, boot environment and OS image installations should be configured
For more information on Hewlett Packard Enterprise's ProLiant System BIOS and UEFI, see
http://www.hp.com/go/uefi/docs
HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in
rver configuration ROM default settings, press F9 in the HPE
HPE ProLiant servers. Following are some of the features that UEFI enables and that the
ProLiant XL190r Gen9 can support when configured for UEFI boot operation:
Secure Boot - A new feature in which the system firmware, option card firmware, operating
y standard functionality and features
systems, and software collaborate to greatly enhance platform security.
Operating system specific functionality - Microsoft Windows 2012 supports several features only
when installed in UEFI mode.
Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for boot
drives when using RAID solutions such as HPE Smart Array.
UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE ProLiant
UEFI Shell provides both standard capabilities as well as numerous enhancements.
PXE boot support for IPv6 networks.
PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.
Boot support for option cards that only support a UEFI option ROM.
E:
When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI
boot image.
When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This
includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is
also true for servers that boot in Legacy mode.
If Microsoft Windows 2008 or Windows 2008 R2 is used in UEFI Boot Mode, UEFI Optimized
Mode must be disabled (this option is enabled by default). This is required to work around an
issue in Windows 2008 / 2008 R2 that requires legacy BIOS components necessary for video
operations in Windows.
HPE ProLiant
HPE Dynamic Smart Array B140i Controller
HPE Smart Array P440/4G Controller
HPE Smart Array P441/4G Controller
QuickSpecs
HPE ProLiant XL190r Gen9 Server
Standard Features
Page 10
HPE Smart Array P841/4G Controller
support, AHCI mode is required.
Internal Storage Devices
Internal MicroSD slot
Maximum Internal
Hot Plug LFF SAS 10k
24TB
x 6TB
Hot Plug LFF SATA
4.0TB
6 x 1TB
Hot Plug LFF SATA SSD
1.9 TB
6 x 480GB
Hot Plug LFF SAS SSD
19.2TB
12 X 1.6TB
Hot Plug SFF SAS 7.2k
12TB
12 X 1.0TB
Hot Plug SFF SAS 10k
21.6TB
12X1.8TB
Hot Plug SFF SAS 15k
7.2TB
12X600GB
Hot Plug SFF SATA
12TB
12X1TB
Hot Plug SFF SATA SSD
11.5TB
12X960GB
Hot Plug SFF SAS SSD
19.2TB
12X1.6TB
Interfaces
FlexibleLOM
HPE ProLiant Gen9 servers offer a new networking technology-Flexible
depending on workload. For further details on the choices, see FlexibleLOM
in the Networking Section of this document.
KVM
Serial USB Video Port (SUV)
MicroSD
1 (internal)
USB Ports
2 (external via SUV) 1 (USB 3.0 internal)
HPE iLO Remote
Port
Health LED
1
Power
1
UID
1
Do not remove LED
1
Industry Standard
ACPI 2.0b Compliant
PCIe 3.0 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
USB 1.1 and 2.0 Compliant
Storage
Host Bus Adapter
HPE H240 Host Bus Adapter
HPE H241 Smart HBA
Storage Controller Cable Kits
HPE XL190r B140i Cbl FIO Kit
HPE XL190r Gen9 Mini-SAS H240 Cbl Kit
HPE XL190r Gen9 Mini-SAS P440 Cbl Kit
HPE XL1x0r Gen9 Mini-SAS P840/440 Cbl Kit
NOTE: The H240 controller and the embedded B140i will operate in UEFI mode only. For legacy
Network Technology. The HPE ProLiant Gen9 server offers the customer
the choice of 1Gigabit, 10Gigabit, InfiniBand or FlexibleLOM solutions
Management Network
Aggregated via HPE Apollo 2000 Chassis
Compliance
Loading...