HPE 779215-B21 Getting Started Guide
QuickSpecs
HPE Synergy 10Gb Interconnect Link Module
Overview
Page 1
HPE Synergy 10Gb Interconnect Link Module
The HPE Synergy 10Gb Interconnect Link Module, satellite module, is designed for Composable Infrastructure. Based on
management at scale while consuming fewer ports at the data center aggregation layer.
Figure 1 HPE Synergy 10G Interconnect Link Module Bezel
1.
Health LED
3.
UID LED
2.
Interconnect Link Port
disaggregated, rack-scale design, it uses a master/satellite architecture to consolidate data center network connections, reduce
hardware and scale network bandwidth across multiple HPE Synergy Frames. This module extends Hewlett Packard Enterprise
composable fabric up to four additional satellite frames with 10Gb connectivity to Synergy Compute Modules and replaces a fixed
ratio of interconnects in each frame by extending the fluid pool of network resources from the master module.
The master module contains intelligent networking capabilities that extend connectivity to frames equipped with satellite modules.
This reduces the need for top of rack switches and substantially decreases cost. The reduction in components simplifies fabric
QuickSpecs
HPE Synergy 10Gb Interconnect Link Module
P
2
Models
HPE Synergy 10Gb Interconnect Link Module
779215-B21
HPE Synergy 10Gb TAA-compliant Interconnect Link Module
779215-B22
NOTE: TAA in the name of this product provides that this product meets the US Trade Agreements Act (19
U.S.C & 2501
contracts.
NOTE:
the US Trade Agreements Act (19 U.S.C & 2501
product manufacturer or reseller on GSA (General Services Administration), the “final products” that we sell
through your GSA Sc
Synergy TAA products are aligned for the configuration of a complete TAA
the complete solution.
NOTE:
or standard product options and become a TAA approved solutions when substantially
transformed/integrated at a designated HPE TAA Compliant Factory. Please look for TAA in the name when
defining HP
Compatibility
HPE Synergy 10G Interconnect Link Module supports the following hardware.
HPE Servers
HPE Synergy Compute Modules
HPE Interconnects
HPE Synergy Interconnect Modules
HPE Network
Converged Network Adapter:
latform Information
-2581) and is compliant for resale on GSA (General Services Administration) agreements or
HPE now includes TAA products and options for the Synergy line of product solutions. TAA refers to
-2581). TAA compliance for HPE simply means that as a
hedule are manufactured or substantially transformed in a TAA-compliant country. HPE
-compliant solution or subsets of
HPE Synergy 12000 TAA Configure-To-Order Frames may include TAA specific, naturally compliant,
E Synergy Options or Solutions that may require TAA compliance.
• HPE Synergy 480 Gen9 Compute Module
• HPE Synergy 620 Gen9 Compute Module
• HPE Synergy 660 Gen9 Compute Module
• HPE Synergy 680 Gen9 Compute Module
• HPE Synergy 480 Gen10 Compute Module
• HPE Synergy 660 Gen10 Compute Module
Adapters
• HPE Virtual Connect SE 40Gb F8 Module for HPE Synergy
• HPE Synergy 40Gb F8 Switch Module
• HPE Synergy 3820C 10/20Gb Converged Network Adapter
• HPE Synergy 2820C 10Gb Converged Network Adapter
NOTE: Consult individual compute module TechSpecs for specific adapter support.
Page
QuickSpecs
HPE Synergy 10Gb Interconnect Link Module
Platform Information
Page 3
Supported Configurations
HPE Synergy 12000 Frame - Rear View
Mezzanines
Port Mapping
Port mapping differs slightly between full height and half-height server compute modules due to the support
for additional Mezza
HPE 12000 Synergy Frame
Interconnect Module Configurations
Compute Module Network Adapters Used
Frame 1
[ICB 1]
HPE VC SE 40Gb F8
->
HPE 10Gb ILM
[ICB 4]
HPE Synergy 10Gb CNA
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 2
[ICB 1]
HPE 10Gb ILM
->
HPE VC SE 40Gb F8
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 1
[ICB 1]
HPE VC SE 40Gb F8
->
HPE 10Gb ILM
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 2
[ICB 1]
HPE 10Gb ILM
->
HPE VC SE 40Gb F8
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
nine cards on the full height version.
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
QuickSpecs
HPE Synergy 10Gb Interconnect Link Module
Platform Information
Page 4
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 3
[ICB 1]
HPE 10Gb ILM
->
HPE 10Gb ILM
[ICB 4]
HPE Synergy 10Gb CNA
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 1
[ICB 1]
HPE VC SE 40Gb F8
->
HPE 10Gb ILM
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 2
[ICB 1]
HPE 10Gb ILM
->
HPE VC SE 40Gb F8
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 3
[ICB 1]
HPE 10Gb ILM
->
HPE 10Gb ILM
[ICB 4]
HPE Synergy 10Gb CNA
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 4
[ICB 1]
HPE 10Gb ILM
->
HPE 10Gb ILM
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 1
[ICB 1]
HPE VC SE 40Gb F8
->
HPE 10Gb ILM
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 2
[ICB 1]
HPE 10Gb ILM
->
HPE VC SE 40Gb F8
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
[ICB 3]
Empty/Interconnect
->
Empty/Interconnect
[ICB 6]
Empty/Adapter
Frame 3
[ICB 1]
HPE 10Gb ILM
->
HPE 10Gb ILM
[ICB 4]
[ICB 2]
Empty/Interconnect
->
Empty/Interconnect
[ICB 5]
Empty/Adapter
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
HPE Synergy 10Gb CNA
Loading...