The HPE ProLiant ML150 Gen9 Server delivers the essential mix of performance, price and expandability to fit the needs of
growing budget
expandability. With expansion options, it allows you to grow as needed with a low initial capital outlay. Covering a wide ran
applications and
Front View details for Tower (LFF)
1
Drive Cage (4 LFF shown) Alternative server
choice would offer 8 SFF
3
USB 3.0 (2)
5
Media bay, blank shown*
install Tape Drive or Optical Drive. Possible
2
Drive Cage (4 LFF shown) Alternative server
choice would offer 8 SFF
4
Media bay, Optional SATA 9.5mm DVD-ROM
shown
6
Media bay, blank shown*
conscious businesses. Designed as a dual-socket tower server, it is a right size tower with performance and
workloads and addressing our customers from sophisticated SMB to large enterprise class server environments.
ge of
NOTE: Optional choices: SATA 9.5mm DVD-ROM
or DVD RW Optical Drive, Tape Drive, or LFF.
NOTE: When populating 10 LFF, not able to
NOTE: Optional choices: SATA 9.5mm DVD-ROM
or DVD RW Optical Drive, Tape Drive, or LFF.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Overview
Page 2
Configurations: 1) 8LFF +1 ODD + 1 Tape Drive
7
Power On/Standby button and system power LED
button
9
NOTE: When populating 10 LFF, not able to
8
1
3
5
Video Connector
7
Power supply Power LED
9
Cable tie back
2
4
USB 3.0 (2)
6
HPE 550W Power Supply
8
Power Supply Power connection
10
(Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1
Tape Drive (Full/Half).
Health LED
install Tape Drive or Optical Drive. Possible
Configurations: 1) 8LFF +1 ODD + 1 Tape Drive
(Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1
Tape Drive (Full/Half).
NIC status
Rear View (Tower Model)
PCI Slots (Slots 1-6) Slot 3 and 5 can support
Optional GPU
USB 2.0 (2)
Unit ID LED
Network RJ-45 Ports (2)
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Overview
Page 3
Internal View (Tower Model)
1
Power Supply
3
System Fans: Three fans for 2P SKU
5
Internal USB 2.0 connector
7
9
Dedicated iLO module slot (optional)
2
Sixteen (16) DDR4 DIMM slots. Shown fully
populated in 16 slots (8 per processor)
4
6
Two (2) processors and heatsinks with HPE Smart
Socket Guide (Second Processor is Optional)
8
MicroSD slot
10
Six (6) PCIe expansion slots
What's New
• Intel Xeon E5-2600 v4 Processor (up to 120W, up to 18 cores support)
For more information regarding Intel Xeon processors, please see the following http://www.intel.com/xeon.
frequency
the
l
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: Recommend to select 900W for 2P config. or check power advisor for power consumption for the
customer usage case.
NOTE: For Ten-core processors.
NOTE: For more information regarding Intel® chipsets, please see the following
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Standard Features
Page 5
Memory
Type:
HPE SmartMemory
DDR4 Registered (RDIMM) or Load Reduced (LRDIMM)
DIMM Slots Available
16
Maximum Capacity
(LRDIMM)
512GB
(16 x 32GB LRDIMM @2400MHz)
Maximum Capacity
(RDIMM)
512GB
(16 x 32GB RDIMM @2400MHz)
Memory Protection
Advanced ECC
Advanced ECC uses single device data correction to detect and correct
single and all multibit error that occurs within a single DRAM chip.
Online spare
Memory online spare mode detects a rank that is degrading and switches
Network
Controller
Broadcom 5717 Dual-port 1Gb
Expansion Slots
Expansio
n Slots #
Technology
Bus
Width
Connector
Width
Bus
Number
Form Factor
Notes
6
PCIe 3.0
x8
x8
Full length/full height
For processor 1
5
PCIe 3.0
x16
x16
Full length/full height
For processor 1
4
PCIe 3.0
x8
x8
Half length/full height
For processor 1
3
PCIe 3.0
x16
x16
Full-height, full-length
slot
For processor 2
2
PCIe 3.0
x8
x8
Half length/full height
For processor 1
1
PCIe 3.0
x8
x8
Half length/full height
For processor 2
NOTE: Bus number - Default bus assignment (in decimal). Inserting cards with PCI bridges may alter
the actual bus assignment number.
NOTE:
Expansion
Slots #
Technolog
y
Bus
Width
Connector
Width
Bus
Number
Device
Number
Form Factor
Notes
7
HPE ML
Kit
x1
x1
Dedicate for ML
Storage Controller
One of the following
depending on
model
Entry Models
HPE Dynamic Smart Array B140i Controller
NOTE: B140i can't mix with any standup internal controller.
Base Models
HPE Dynamic Smart Array B140i Controller
NOTE: B140i can't mix with any standup internal controller.
Performance Models
HPE H240 FIO Smart Host Bus Adapter
Internal Storage
Devices
Optical Drive
Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: This server does not support mixing LRDIMMs or RDIMMs. Attempting to mix any combination
of these DIMMs can cause the server to halt during BIOS installation.
operation to the spare rank.
Six total expansion PCIe 3.0 slots. Two PCIe 3.0 x16 (x16 speed); Four PCIe 3.0 x 8 (x8 speed).
Gen9
Dedicated
iLO Port
NOTE: Optical is optional in entry, base and performance BTO models.
Series
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Standard Features
Page 6
One of the following
depending on
m
NOTE: ML150 Gen9 Slim ODD Enablement Kit (P/N: 784603-B21) is
required for any DVD options.
Hard Drives
None ship standard
Hard Drive Bays
Up to 10 Non-hot plug SATA 3.5" drives
4 Hot plug LFF SAS/SATA HDD bays; upgradable to 8
8 Hot plug SFF SAS/SATA HDD bays; upgradable to 16
NOTE:
Maximum Internal
Storage
One of the following
depending on
model
CAPACITY
CONFIGURATION
Hot Plug LFF SAS
80TB
8x10TB
Hot Plug LFF SATA
80TB
8x10TB
Hot Plug SFF SAS
32TB
16x2TB
Hot Plug SFF SATA
32TB
16x2TB
Non Hot Plug LFF SATA
40TB
10x4TB
Hot Plug LFF SAS SSD
12.8TB
8x1.6TB
Hot Plug LFF SATA SSD
30.72TB
8x3.84TB
Hot Plug SFF SAS SSD
30.72TB
16x1.92TB
Hot Plug SFF SATA SSD
61.44TB
16x3.84TB
Power Supply
One of the following
depending on
model
HPE 550W FIO Power Supply
HPE 900W AC 240V DC Redundant Power Supply
NOTE:
Non
(200
po
127VAC) of power.
power redundancy in ProLiant servers that offer only a single power supply bay, providing additional
odel
NOTE: Mixing drive cage types is not allowed.
NOTE: All Pre-configured Models come populated with hard drive blanks
installed. The 4LFF configurations includes 2 blanks and 8SFF includes 6
blanks. Additional hard drive blanks can be ordered using either P/N
654963-B21for the HPE LFF HDD Blank Kit or P/N 654961-B21for
the HPE SFF HDD Blank Kit. These part numbers for single HDD blanks
below are also provided should you require replacement HDD blanks
for your server.
NOTE: NHPE SATA is limited to B140i controller.
NOTE: When populate 10 LFF, not able to install any Tape Drive and
Optical Drive. Possible Configurations: 1) 8LFF +1 ODD + 1 Tape Drive
(Full/Half), or 2) 9LFF + 1 ODD, or 3) 9LFF + 1 Tape Drive (Full/Half).
NOTE: Must select two 4LFF NHPE drive cage and 10LFF enablement kit
if customer wants to support 10 LFF drives.
NOTE: 16SFF is limited to P840 controller.
NOTE: 10LFF is limited to H140i controller
NOTE: H240 8LFF/8SFF require 2 cable kit P/N: 784606-B21.
P84016SFF require 2 cable kit P/N: 784608-B21.
Each Redundant Power Supply Backplane can support up to two (2) power input modules.
-redundant configurations with a single power input module installed can provide up to 900W
– 240VAC) and up to 550W (100 – 127VAC) of power. Redundant configurations with two
wer input modules installed can provide up to 800W (200 – 240VAC) and up to 550W (100 –
Looking for high-efficiency power solutions at an entry-level price for your ProLiant Gen9 Essential
Server? HPE Entry-Level Power Supplies offer an optimized set of features with options for both
redundant and non-redundant power configurations.
The HPE 550W FIO Power Supply offers Silver-certified 80 Plus power efficiency (up to 89%) with an
optimized set of features for non-redundant power configurations.
The HPE 900W AC 240VDC Power Input Module with Power Backplane can be configured to support
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Standard Features
Page 7
protection against power loss. With an 80 Plus Gold power efficiency rating (up to 92%), this power
and replacement.
Rack Options
One of the following
depending on
model
System Fans
One of the following
depending on
model
Non-redundant
Redundant
1P model
2 fans
NA
NOTE:
Non-redundant
Redundant
2P model
3 fans
NA
NOTE:
Interfaces
Video
1 (rear)
Network RJ-45 (Ethernet)
2
HPE iLO Remote Management
Network Port
2GB NAND
NOTE:
Micro SD Slot
1 (internal)
NOTE:
Micro-SD card into the Micro-SD slot while the server is powered.
USB 3.0
5 (2 rear, 1 internal, 2 front )
USB 2.0
3 (2 rear, 1 internal)
Operating Systems
and Virtualization
Software Support
for ProLiant
Servers
Upgradeable to 2 processors (36 Cores)
Up to 16 SFF Hard Drive Bays; Or 10 LFF Hard Drive Bays
Up to 16 DIMM slots
Redundant Power Supply
Tower to rack conversion
Optional optical drive (up to 1)
Industry Standard
Complianc
ACPI 2.0b Compliant
PCIe 3.0 Compliant
PXE Support
option helps to reduce operating expenses while protecting against trapped power capacity in the data
center. Hot-plug AC power input modules allow for better serviceability with fast and easy deployment
HPE T/R CONV TRAY UNIVERSAL KIT
Two (2) Non-hot plug, non-redundant fans ship as standard.
Third fan is shipped with 2nd CPU Kit. Third fan is only required in 2P configurations.
Dedicated Port for iLO is Optional.
The Micro-SD slot is not a hot-pluggable device. Customers should not attempt to plug a
NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers
for OS and Virtualization Software and latest listing of software drivers available for your server,
please visit our Support Matrix at: http://www.hp.com/go/ossupport and our driver download
NOTE: Total 6, 8, 10, 12, 14, 16, 18 cores.
NOTE: When populate 10 LFF, not able to install Optical Drive. Possible Configurations: 1) 8LFF
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability
the factory for your HPE ProLiant Gen9 Server.
Form Factor
Tower or Rack (5U)
Embedded
Management
HPE Integrated
(HPE iLO)
Monitor your servers for ongoing management, service alerting, reporting and
at http://www.hpe.com/info/ilo.
UEFI
Configure and boot your servers securely with industry standard Unified
http://www.hpe.com/servers/uefi
• 1280 x 1024 (32 bpp)
and more secured configuration than the legacy ROM while interacting with your server at boot time.
HPE ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE: The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)
of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.
UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:
• Secure Boot
• Operating system specific functionality
• Support for > 2.2 TB (using GPT) boot drives
• USB 3.0 Stack
• Embedded UEFI Shell
• Mass Configuration Deployment Tool using RESTful API for iLO 4
• PXE boot support for IPv6 networks
• Boot support for option cards that only support a UEFI option ROM
• Network Stack configurations
NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured
properly to support UEFI.
NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in
Lights-Out
remote management with HPE iLO. Not available on ML10 Gen9. Learn more
at
Extensible Firmware Interface (UEFI). Learn more
.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Standard Features
Page 9
RESTful API
RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server
industry standards. Learn more at http://www.hpe.com/info/restfulapi.
Intelligent
Hassle free server and OS provisioning for 1 or few servers with Intelligent
Optimize firmware and driver updates with Smart Update solutions including
http://www.hpe.com/servers/smartupdatemanager
HPE Systems
HPE SIM allows you to monitor the health of your HPE ProLiant Servers and HPE
http://www.hpe.com/servers/hpsim.
Scripting Tool
Provision 1 to many servers using your own scripts to discover and deploy them
/powershell.
RESTful
RESTful Interface tool is a scripting tool to provision using RESTful API for iLO 4
HPE iLO Mobile
Enables the ability to access, deploy, and manage your server anytime from
anywhere from select smartphones and mobile devices. For additional information
http://www.hpe.com/info/ilo/mobileapp
HPE Insight
HPE Insight Online, available at no additional cost as part of your Hewlett Packard
at http://www.hpe.com/info/insightonline/explore.
http://www.hp.com/go/hpsum
Security
Power-on password
Setup password
management such as configuration and maintenance tasks based on modern
Provisioning
Remote Support
Insight Manager
(HPE SIM)
Kit and
Windows
PowerShell
Provisioning. Learn more
at
.
The Hewlett Packard Enterprise embedded remote support, when used with
Insight Online direct connect or HPE Insight Remote Support, allows HPE
ProLiant servers to transmit hardware events directly to Hewlett Packard
Enterprise or a Hewlett Packard Enterprise Authorized Partner for automated
phone home support. Learn more
Smart Update Manager (SUM) and Service Pack for ProLiant (SPP) and smart
components. Learn more
at
.
Integrity Servers, and also provides you with basic support for non-HPE servers.
HPE SIM also integrates with Smart Update Manager to provide quick and
seamless firmware updates. Learn more at
with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for
Windows PowerShell. Learn more
at
http://www.hpe.com/servers/proliant/stk or http://www.hpe.com/servers
Interface Tool
to discover and deploy servers at scale. Learn more
http://www.hpe.com/info/resttool.
at
Application
please visit:
Online
Enterprise warranty, Care Pack or contractual support agreement with Hewlett
Packard Enterprise, is a personalized dashboard for simplified tracking of IT
operations and support information from anywhere, anytime. Learn more
NOTE: The Service Pack for ProLiant (which includes HPE SUM) can be downloaded from
http://www.hp.com/go/spp/download. More information can be
found: http://www.hp.com/go/SmartUpdate, http://www.hp.com/go/spp and
.
.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Standard Features
Page 10
Serial interface control
Power switch security
Administrator's password
TPM 1.2
UEFI
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
tial setup is available for 90
replace Optional CSR
support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.
network of HPE Authorized Channel Partners resellers. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and ini
days from date of purchase. Enhancements to warranty services are available through HPE Care Pack
services or customized service agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next
business day response. Warranty repairs may be accomplished through the use of Customer Self
Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for
easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve
added complexity. Customers may choose to have Hewlett Packard Enterprise
parts at no charge. Additional information regarding worldwide limited warranty and technical
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Optional Features
Page 11
Embedded
iLO Essentials
HPE iLO Essentials is the preferred license for small and medium business that
offers full remote server management capabilities for small and medium business
at http://www.hpe.com/servers/iLO/essentials.
iLO Scale-Out
HPE iLO Scale-Out is the preferred license built for web hosting, cloud service
mputing data centers, managing massive scale
visit http://www.hpe.com/servers/iLO/scale-out.
iLO Advanced
HPE iLO Advanced licenses offer smart remote functionality without compromise,
http://www.hpe.com/servers/iloadvanced
Server
HPE Insight
HPE Insight Control, lets you deploy, migrate, monitor, remote control, and
optimize your IT infrastructure through a single, simple management console. For
more information, see http://www.hpe.com/info/insightcontrol.
High Performance
http://www.hp.com/go/cmu
HPE Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters
http://www.hp.com/go/clusters
HPC Interconnects
speed interconnects are fully supported
Storage Software
Whether you're a large enterprise or a smaller business, Hewlett Packard Enterprise data
Management
via the Integrated Remote Console (IRC), virtual media, and e-mail based alerts.
Learn more about HPE iLO Essentials
providers, and high performance co
out environments for the DL 100 and 10 series servers, not available for ML
servers. This license offers sophisticated scripting tools that provides remote
access through Text Console via SSH, Dynamic power capping, Email-based
Alerting and proactive notifications. For more information,
for all HPE ProLiant servers. The license includes the full integrated remote
console, virtual keyboard, video, and mouse (KVM), multi-user collaboration,
console record and replay, and GUI-based and scripted virtual media and virtual
folders. You can also activate the enhanced security and power management
functionality. Learn more about HPE iLO Advanced
at
.
Management
Control
HPE Insight Cluster Management Utility (CMU) is a Hewlett Packard Enterprise licensed and supported
Clusters
suite of tools that are used for lifecycle management of hyperscale clusters of Linux ProLiant systems.
CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU
makes the administration of clusters user friendly, efficient, and effective.
optimized for High Performance Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPEC Server. A Cluster Platform Configurator simplifies
ordering.
NOTE: High Performance Computing (HPC) interconnect technologies are available for this server
.
under the HPE Cluster Platform product portfolio. These highby Hewlett Packard Enterprise when they are part of these configure to order clusters. Solutions can
be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to
configure HPEC Clusters with InfiniBand
Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html.
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no further
than Hewlett Packard Enterprise storage software. Our storage software helps you reduce costs, simplify
storage infrastructure, protect vital assets and respond faster to business opportunities.
Storage software that gets the job done:
• Data Protection and Recovery Software
.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Optional Features
Page 12
protection and recovery software will cost-effectively protect you against disaster and ensure
e command and control foundation you need to efficiently manage and visualize
see: http://www.hp.com/go/storage/software.
One Config Simple
business continuity.
• Data Archive and Migration Software
Hewlett Packard Enterprise storage software enables you to comply with data retention and
retrieval requirements, improve application performance, and reduce costs by efficiently
migrating infrequently accessed or less valuable data to lower cost storage.
• Storage Resource Management Software (SRM)
Hewlett Packard Enterprise storage resource management software reduces operational costs
and provides th
your physical and virtual environments.
•Data Replication Software
Hewlett Packard Enterprise offers array-based and host-based replication software for use in
disaster recovery, testing, application development and reporting.
• Storage Device Management Software
Maximize your investment in Hewlett Packard Enterprise storage and networking with software
that enables hardware-specific configuration, performance tuning and connectivity
management.
• HPE StoreVirtual VSA
With HPE StoreVirtual VSA you can use the power of virtualization to create a virtual array
within your host server. Manage it as a single pool of shared storage capacity, and scale it to
match your evolving needs. HPE ProLiant Gen9 servers include a 3-year limited license for HPE
StoreVirtual VSA software with 1TB of capacity at no extra cost. Simply select to install HPE
StoreVirtual VSA software during server setup within Intelligent Provisioning. More information,
instructional videos, and free console management software are available
at http://www.hp.com/go/vsa1TB
.
NOTE: For more information about Storage Software including QuickSpecs, please
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
(SCE)
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products
not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an
Authorized Partner for assistance. https://h22174.www2.hp.com/SimplifiedConfig/Index
.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Service and Support
Page 13
HPE Support Services
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. HPE
Support Services enable you to choose the right service level, length of coverage and re
you purchase your new server, giving you full entitlement to the support for need for your IT and
business.
Connect your devices
Unlock all of the benefits of your technology investment by connecting your products to Hewlett
Packard
single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre
failure alerts, automatic call logging, and automatic parts dispat
Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and
increase optimization. All of these benefits are already available to you with your server storage and
networkin
Recommended
Support
Standard: HPE Foundation Care 24x7, three-year Support Service
HPE Foundation Care 24x7 gives you access to Hewlett Packard Enterprise 24 hours a day, seven days
a week for assistance on resolving issues. This service includes need based Hardware onsite response
within four hours. In addition, collaborative software support is included in this service that provides
trou
support experience and make Hewlett Packard Enterprise your first call to help resolve hardware or
software problems.
Optimized: HPE Proactive Care* with 24x7 coverage, three year Support Service
HPE Proactive Care gives customers an enhanced call experience. When your products are connected to
Hewlett Packard Enterprise, Proactive Care helps prevent problems and maintains IT stability by
utilizing personalized proactive reports with recommendations and advice. This service combines three
yea
there is a problem. This service also includes collaborative software support for Independent Software
Vendors (ISVs),
Hewlett Packard Enterprise will provide Hewlett Packard Enterprise-supported replacement parts and
materials necessary to maintain the covered hardware product in operating condition, including parts
and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retent
replaced by Hewlett Packard Enterprise due to malfunction.
Related Services
HPE Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard
devices and networking options to assist you in bringing your new hardware into operation in a timely
and professional manner.
https://www.hpe.com/h20195/V2/GetPDF.aspx/5981
HPE Installation and Startup Service
Provides for the installation and startup of Hewlett Packard Enterprise technology including
BladeSystems, C
server blades, storage blades, SAN
switch blades, HPE Virtual Connect modules (Ethernet and Fibre Channel), Ethernet network
interconnects, and InfiniBand, as well as the installation of one supported operating system type
(Windows® or Linux).
sponse time as
Enterprise. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a
-
ch. HPE Proactive Care Service and HPE
1- IDC 2 – HP CSC reports 2014 - 2015
bleshooting assistance on industry leading software running on your HPE server. Simplify your
-8876ENW&cc=us&lc=en
rs proactive reporting and advice with our 24x7 coverage, four hour hardware response time when
(Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.
g products, securely connected to Hewlett Packard Enterprise support.
ion service feature option applies only to Disk or eligible SSD/Flash Drives
Enterprise branded servers, storage
-Class enclosure, HPE ProLiant c-Class and Integrity
-9356EN.pdf
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Service and Support
Page 14
HPE Techno
Offer flexible services and technical skills to meet your changing IT demands. With a menu of service
that is tailored to suit your needs, you get additional resources and specialist skills to help you maintain
peak performanc
responding to your dynamic business.
HPE Education
Services
Keep your IT staff trained making sure they have the right skills to deliver on your business
outcomes.
investment. http://www.hpe.com/ww/learn
HPE Support Center
The HPE Support Center is a personalized online support portal with access to information, tools and
experts to support Hewlett Packard Enterprise business products. Submit support cases online, chat
with Hewlett Packard Enterprise experts, access support resources or collaborate with peers.
Learn more
The Hewlett Packard Enterprise Support Center Mobile App* allows you to resolve issues yourself or
quickly connect to an agent for live support. Now, you can get access to personalized IT support
anywher
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a Hewlett
Packard Enterprise warranty, HPE Support Service or Hewlett Packard Enterprise contractual support
agreement.
*HPE Support Center Mobile App
For more information: http://www.hpe.com/services
logy Services Support Credits
e of your IT. Offered as annual credits, you can plan your budgets while proactively
Book on a class today and learn how to get the most from your technology
http://www.hpe.com/support/hpesc
e, anytime.
is subject to local availability.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Pre-configured Models
Page 15
configured models ship with the configurations below. Options can be selected from the Core or Additional options section
configured Models come populated with hard drive blanks installed. The 4LFF configurations includes 2 blanks
Entry Models
Base Models
[SKU Number]
776274-xx1
834606-xx1
776275-xx1
834607-xx1
Model Name
HP ProLiant ML150
2603v3 4GB
550W PS Server
HPE ProLiant ML150
HP ProLiant ML150
Server
HPE ProLiant ML150
Processor
Intel® Xeon® E5-
Intel® Xeon® E5-
Intel® Xeon® E5-
Intel® Xeon® E5-
Number of Processors
One
Memory
4GB (1x4GB
2133 MHz)
8GB (1x8GB
2400 MHz)
8GB (1x8GB
2133 MHz)
8GB (1x8GB
2400 MHz)
Network Controller
Broadcom 5717 Dual-port 1GbE
Storage Controller
HPE Dynamic Smart Array B140i
Hard Drive
None ship standard
Internal Storage
4 LFF HDD Bays (Non Hot Plug)
4 LFF HDD Bays
Optical Drive Bay
1; (Optional: DVD-ROM, DVD-RW)
Optical Drive
Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
out (optional only for DL), iLO Advanced (optional)
Form Factor
Tower (5U)
Warranty
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day
response.
Performance Models
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
1. Preof this QuickSpecs.
2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options
purchased will be shipped separately.
3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
4. Not all models are available in all regions. Check with your local country Hewlett Packard Enterprise offices for availability.
NOTE:
and 8SFF includes 6 blanks. Additional hard drive blanks can be ordered using either P/N 666986-B21 for the HP LFF HDD
Blank Kit or P/N 666987-B21 for the HP SFF HDD Blank Kit. These part numbers for single HDD blanks below are also
provided should you require replacement HDD blanks for your server.
NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also
included with each standard AC power supply option kit. If a different power cord is required, please check the
Power Cables web page.
CAUTION: Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number of people to use for any installation.
All Pre-
ProLiant
Gen9 E5-
B140i Non-hot Plug
4LFF SATA Entry
2603v3
Registered DIMMs,
Gen9 E5-2603v4 8GB-
R B140i NHP 4LFF
SATA 550W Entry Svr
2603v4
Registered DIMMs,
Gen9 E5-2609v3 8GB
B140i Hot Plug 4LFF
SATA Base 550W PS
2609v3
Registered DIMMs,
Gen9 E5-2609v4 8GBR B140i Hot Plug 4LFF
SATA 550W Base Svr
2609v4
Registered DIMMs,
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Pre-configured Models
Page 16
[SKU Number]
834608-xx1
Model Name
HPE ProLiant ML150 Gen9 E5-2620v4 16GB-R H240 Hot Plug 8SFF SAS 900W Perf Svr
Processor
Intel® Xeon® E5-2620v4
Number of Processors
One
Memory
16GB (1x16GB Registered DIMMs, 2400 MHz)
Network Controller
Broadcom 5717 Dual-port 1GbE
Storage Controller
HPE H240 Smart Host Bus Adapter
NOTE:
el
with H240 Storage Controller.
Hard Drive
None ship standard
Internal Storage
8 SFF HDD Bays
Optical Drive Bay
1; (Optional: DVD-ROM, DVD-RW)
Optical Drive
Optional Slim Optical Bay (SATA DVD-RW/ROM Optical Drive)
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
eed of the processor. Actual memory speed may depend on the quantity and
6 is socket/segment designation, 00 = Processor SKU, x = L for low power SKUs and
v# (not yet designated) = version number.
http://www.hp.com/go/proliant-energy-efficient
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales
representative for information on configurable product offerings and requirements.
1. Factory Integrated Models must start with a CTO Server.
2. FIO indicates that this option is only available as a factory installable option.
3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.
Plug 4LFF Configure-to-order
Plug 4LFF Configure-to-order
Hot Plug 8SFF Configure-to-
Select one or two processors from Core options-Processor section below,
• Ifone processor isdesired, select one xxxxxx-L21
• If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
• Up to 2 processors supported. Mixing different processor models is not supported.
• DDR4 speed is the maximum memory sp
type of DIMMs installed.
For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the Product Line (E3, E5, E7);
2600x v#, 2 = number of CPUs in a Node,
Select one or more memory from Core options-Memory section below,
• LRDIMM, RDIMM are all distinct memory technologies and cannot be mixed within a server. The majority of ProLiant
Gen9 servers support LRDIMM and RDIMM.
• HPE memory from previous generation servers are not qualified or warranted with this HPE ProLiant Server. HPE
SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this
document for Gen9.
• If only one processor is installed, only half of the total DIMM slots are available. When populating with two
processors all DIMM slots are available.
• Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features,
see:
.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
Page 18
• Depending on the memory configuration and processor model, the memory speed may run at 2133MHz, 1866MHz,
and/or experience operational issues with your server.
Select a standup NIC adapter from Core options-Networking section below,
1600MHz or 1333MHz. Please see Memory Population Table or the Online Memory Configuration Tool
at: http://www.hp.com/go/ddr4config.
Select one or more power supplies from Core Options-Power Supplies section below:
• Prior to selecting a power supply option, it is highly recommended that you review your server configuration in the
HPE Power Advisor tool to determine the right size power supply for your server configuration. The HPE Power
Advisor is located at: http://www.hp.com/go/hppoweradvisor.
• Mixing of power supplies in the same server is not supported. All power supplies must be of the same input voltage,
output rating, and efficiency rating. If non-matching power supplies are installed, you may receive an error message
• Please see the QuickSpecs for Technical Specifications and additional
information: http://www.hp.com/go/ProLiantNICs
• These options are upgradeable and can be changed from the original configuration after the server is shipped.
• For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
.
Select one or more drives from Core options-HPE Drives section below:
• The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level
for all components.
• Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
• The HPE ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form Factor (SFF 2.5 in) and
Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and Solid State Drives. These new
carriers provide status and activity indicators as well as caution indicators for "Do Not Remove".
Select one or more graphics adapter from Additional options section below.
• Please see the HPE Power Advisor for estimated power consumption of your individual system configuration prior to
installing GPUs. The HPE Power Advisor is located at: http://www.hp.com/go/hppoweradvisor
• This section may contain FIO options, please see HPE Computation & Graphics Accelerators section below.
.
Select one or more Unique options from Core options section below.
• This section may contain FIO options, please see the Unique options section below.
• FIO indicates that this option is only available as a factory installable option.
Select one or more Fan Kits from Core options section below.
• This section may contain FIO options, please see HPE Cooling Options section below.
• FIO indicates that this option is only available as a factory installable option.
Select one or more Storage options from Additional options section below.
• The embedded B140i controller will operate in UEFI only mode. For legacy support an additional controller will be
needed, and for CTO orders please also select
the Legacy mode settings part, 758959-B22
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
Page 19
•
This section may contain FIO options, please see HPE Storage Controllers section below.
• FIO indicates that this option is only available as a factory installable option.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 20
information.
HPE Unique
HP ML150 Gen9 4LFF Hot Plug Drive Cage
NOTE:
725872-B21
HP ML150 Gen9 8SFF Hot Plug Drive Cage
725874-B21
HP ML150 Gen9 4LFF Non-hot Plug Drive Cage
779859-B21
HP ML150 Gen9 PCI Baffle Kit
779861-B21
HP ML150 Gen9 Slim ODD Enablement Kit
784603-B21
HP ML150 Gen9 Smart Storage Battery Holder Kit
786710-B21
HP ML150 Gen9 9/10LFF Drive Enablement Kit
Tape Drive (Full/Half), or 2)
788567-B21
HP ML150 Gen9 Dedicated iLO Management Port Kit
780310-B21
HP ML150 Gen9 Mini SAS H240 Cable Kit
784606-B21
HP ML150 Gen9 Mini SAS P440/P840 Cable Kit
784608-B21
HP Tower to Rack Conversion Tray Universal Kit
417705-B21
HP AHCI-Enable FIO Setting
mode is required on B140i controller.
801845-B21
HP ML150 Gen9 GPU Enablement Kit
779863-B21
HPE Processors
E5-2600v4 series Processors
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
Options
Adding 4LFF Hard Drive Cage allow up to 8FF Drive Bays.
NOTE: Adding 8SFF Hard Drive backplane allow up to 16SFF Drive Bays.
NOTE: Adding 4LFF Hard Drive Cage allow for up to 8LFF Drive Bays.
NOTE: Must select when a PCIe card is installed with any Networking,
Controllers (SAS, SCSI and Fiber Channel), and Graphic options.
NOTE: HPE ML150 Gen9 PCI BAFFLE Kit (779861-B21) is included while
order Performance Model with H240 Storage Controller.
NOTE: Mustselect with the ODD option.
NOTE: Must select wheninstall Smart Store Battery P/N: 727258-B21.
NOTE: Must select when install P440/840 FIO controller P/N: 761872-
B21/761874-B21.
NOTE: Must select when support upgrade battery.
NOTE: When populate 10 LFF, not able to install any Tape Drive or Optical
HP 9.5mm SATA DVD-ROM JackBlack Gen9 Optical Drive
726536-B21
HP 9.5mm SATA DVD-RW JackBlack G9 Optical Drive
726537-B21
HP ML150 Gen9 Slim ODD Enablement Kit
NOTE: Must be selected with the ODD option.
784603-B21
NOTE:
HPE Drives
NOTE: User may select any combination of SAS or SATA Hard Drives. However, if RAID is selected and
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765466-B21
HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed
Firmware HDD
872481-B21
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
781518-B21
HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty
Hard Drive
718162-B21
HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware HDD
872479-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty DS Digitally Signed
Firmware HDD
870759-B21
HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally
Signed Firmware HDD
870765-B21
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
785069-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
652589-B21
Memory Kit
Memory Kit
Must select ODD enablement kit, one kit per ODD.
both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used in the RAID
set.
NOTE: If B140i is the primary controller, user can only select SATA drives.
NOTE: SAS drives require the selection of a SAS controller. See card lists in Controllers section.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 24
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware HDD
870757-B21
HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally
Signed Firmware HDD
870763-B21
HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware HDD
872477-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
759212-B21
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
781516-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
652583-B21
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty
Hard Drive
748387-B21
HP 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
759210-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
652572-B21
HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware HDD
870753-B21
HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware HDD
872475-B21
HP 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
759208-B21
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
785067-B21
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
652564-B21
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard
Drive
652605-B21
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765464-B21
HPE 1TB 12G SAS 7.2K rpm SFF (2.5in) SC Midline 1yr Warranty Hard Drive
832514-B21
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty
Hard Drive
791034-B21
SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
793671-B21
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
793669-B21
HP 600GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
765424-B21
HP 450GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
737394-B21
HP 300GB 12G SAS 15K rpm LFF (3.5-inch) SC Converter Enterprise 3yr
Warranty Hard Drive
737261-B21
SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
857644-B21
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
819201-B21
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 25
HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
861590-B21
HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed
861754-B21
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
765259-B21
HPE 6TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846514-B21
HP 6TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
761477-B21
HPE 4TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed
Firmware HDD
861756-B21
HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
818367-B21
HP 4TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
765257-B21
HPE 3TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846528-B21
HP 3TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
652766-B21
HPE 2TB 12G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
818365-B21
HPE 1TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846524-B21
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
652753-B21
SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HPE 10TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
857648-B21
HPE 8TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
861594-B21
HPE 8TB 6G SATA 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard
Drive
819203-B21
HPE 6TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed
Firmware HDD
861750-B21
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
765255-B21
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drive
793667-B21
HPE 6TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
846510-B21
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
753874-B21
HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed
Firmware HDD
861752-B21
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 512e 1yr Warranty Hard
Drive
765253-B21
HPE 4TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
861678-B21
HP 4TB 6G SATA 7.2k rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
693687-B21
HP 4TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Performance 1yr Warranty
Hard Drives
793665-B21
HPE 3TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
861693-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
628061-B21
HPE 2TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
861676-B21
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
658079-B21
HPE 2TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
858596-B21
HPE 1TB 6G SATA 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive
861691-B21
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
657750-B21
HPE 1TB 6G SATA 7.2K rpm LFF (3.5in) SC Standard 1yr Warranty Hard Drive
858594-B21
Firmware HDD
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 26
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive
658071-B21
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 2TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765455-B21
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765453-B21
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
655710-B21
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
HP 4TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
801888-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
628065-B21
HP 3TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
801886-B21
HP 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
659339-B21
HP 2TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
801884-B21
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
659337-B21
HP 1TB 6G SATA 7.2K rpm LFF (3.5in) Non-hot Plug Standard 1yr Warranty
Hard Drive
801882-B21
HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) Non-hot plug Midline 1yr Warranty
Hard Drive
659341-B21
12G SAS Hot Plug SFF (2.5-inch) Enterprise Performance Solid State Drives
HP 200GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802578-B21
HP 400GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802582-B21
HP 800GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802586-B21
HP 1.92TB 12G SAS Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802891-B21
12G SAS Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
762263-B21
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty
Solid State Drive
762261-B21
12G SAS Hot Plug LFF (3.5-inch) Enterprise Value Solid State Drives
HP 1.6TB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty
Solid State Drive
762272-B21
HP 800GB 12G SAS Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty
Solid State Drive
762270-B21
SAS Hot Plug SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
HP 8TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
793703-B21
HP 6TB 12G SAS 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
793699-B21
6G SATA Hot Plug SFF (2.5-inch) SC Read Intensive Solid State Drives
HPE 1.92TB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State
Drive
871770-B21
HPE 1.6TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
869386-B21
HP 1.6TB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804605-B21
Hard Drive
Hard Drive
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 27
HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
869384-B21
HPE 960GB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State
Drive
871768-B21
HP 800GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804599-B21
HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
869378-B21
HP 480GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804593-B21
HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
869376-B21
HP 240GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804587-B21
HPE 150GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed
869374-B21
HP 120GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804581-B21
HP 80GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804575-B21
6G SATA Hot Plug RI-3 SFF (2.5-inch) SC Solid State Drives
HP 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816929-B21
6G SATA Hot Plug SFF (2.5-inch) SC Write Intensive Solid State Drives
HPE 1.6TB SATA 6G WI SFF SC DS SSD
872363-B21
HP 1.2TB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804677-B21
HPE 800GB SATA 6G WI SFF SC DS SSD
872359-B21
HP 800GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804671-B21
HPE 400GB SATA 6G WI SFF SC DS SSD
872355-B21
HP 400GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804665-B21
HP 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804639-B21
6G SATA Hot Plug SFF (2.5-inch) SC Mixed Use Solid State Drives
HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
872352-B21
HP 1.6TB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804631-B21
HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
872348-B21
HP 800GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804625-B21
HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed
Firmware SSD
872344-B21
HP 480GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
832414-B21
HP 200GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive
804613-B21
6G SATA Hot Plug MU-3 SFF (2.5-inch) SC Solid State Drives
HP 1.92TB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
817011-B21
HP 960GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816995-B21
HP 480GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive
816985-B21
6G SATA Hot Plug LFF (3.5-inch) SC Read Intensive Solid State Drives
HPE 1.6TB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty Digitally Signed
Firmware SSD
869388-B21
HP 1.6TB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804608-B21
HP 800GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804602-B21
HPE 480GB SATA 6G Read Intensive LFF (3.5in) SCC 3yr Wty Digitally Signed
Firmware SSD
869380-B21
HP 480GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804596-B21
HP 240GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804590-B21
Firmware SSD
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 28
HP 120GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804584-B21
HP 80GB 6G SATA Read Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804578-B21
6G SATA Hot Plug LFF (3.5-inch) RI-3 SCC SSD
HP 3.84TB 6G SATA Read Intensive-3 LFF 3.5-in SC Converter 3yr Wty Solid
816933-B21
6G SATA Hot Plug LFF (3.5-inch) SC Write Intensive Solid State Drives
HP 1.2TB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804680-B21
HP 800GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804674-B21
HP 400GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804668-B21
HP 200GB 6G SATA Write Intensive-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804642-B21
6G SATA Hot Plug LFF (3.5-inch) SC Mixed Use Solid State Drives
HP 1.6TB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804634-B21
HPE 960GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed
Firmware SSD
872350-B21
HP 800GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804628-B21
HPE 480GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed
Firmware SSD
872346-B21
HP 480GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
832417-B21
HP 200GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive
804616-B21
6G SATA Hot Plug LFF (3.5-inch) MU-3 SCC SSD
HP 960GB 6G SATA Mixed Use-3 LFF 3.5-in SC Converter 3yr Wty Solid State
Drive
816999-B21
HP 480GB 6G SATA Mixed Use-3 LFF 3.5-in SC Converter 3yr Wty Solid State
Drive
816989-B21
6G SATA Hot Plug with SmartDrive LFF (3.5-inch) Midline 512e Helium Drives
HP 8TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
793695-B21
HP 6TB 6G SATA 7.2K rpm LFF (3.5-inch) SC 512e Helium 1yr Warranty Hard
Drive
793683-B21
Hard Drive Blank Kits
HP Large Form Factor Hard Drive Blank Kit
666986-B21
HP Small Form Factor Hard Drive Blank Kit
666987-B21
HPE Networking
1 Gigabit Ethernet adapters
HP Ethernet 1Gb 4-port 331T Adapter
647594-B21
HP Ethernet 1Gb 2-port 361T Adapter
652497-B21
HP Ethernet 1Gb 2-port 332T Adapter
615732-B21
HP Ethernet 1Gb 4-port 366T Adapter
811546-B21
10 Gigabit Ethernet adapters
HP Ethernet 10Gb 2-port 560SFP+ Adapter
665249-B21
HP Ethernet 10Gb 2-port 561T Adapter
716591-B21
HPE Ethernet 10Gb 2-port 562SFP+ Adapter
727055-B21
HPE Power
Supplies
HPE Entry-Level Power Supplies
HPE 550W Standard FIO Power Supply Kit
efficiency rating of up to 89%. Power specifications and technical content for all
730941-B21
State Drive
NOTE: The above power supply option is 80Plus Silver-certified with an
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 29
HPE Server power supplies can be found
at http://www.hp.com/go/proliant/powersupply.
HPE 900W Standard AC 240VDC Power Input Module
775595-B21
HPE 900W Standard AC 240VDC RPS Power Backplane
B21), it
814835-B21
HPE 900W Standard AC 240VDC Redundant Power Supply Kit
820792-B21
HPE Computation
and Graphics
Accelerator
HP NVIDIA Quadro K2200 Graphics Accelerator
J0G89A
HP AMD FirePro W7100 Accelerator Kit
W7100 Accelerator Kit (J0H10A) is selected.
J0H10A
HP ML150 Gen9 GPU Enablement Kit
779863-B21
HPE Cooling
Option
HP ML150 Gen9 PCI Baffle Kit
779861-B21
NOTE: This part number can only be bought standalone and is for field
integration only.
NOTE: HPE 900W Gold (Redundant) AC 240VDC Power Input Module
(775595-B21) must be used with Power Backplane (814835-B21).
NOTE: This part number can only be bought standalone and is for field
integration only.
NOTE: This RPS backplane is mandatorily needed with 900W RPS input
module.
NOTE: Each Redundant Power Supply Backplane can support up to two (2)
power input modules.
NOTE: When purchase HPE 900W AC 240VDC RPS Power Backplane
(814835-B21) + HPE 900W AC 240VDC Power Input Module (775595supports 900W non-redundant PS.
NOTE: This Redundant Power supply kit includes 2 power supply input module
and 1 backplane kit.
NOTE: This part number is both factory installed option and field integratable
option.
NOTE: Redundant AC Power Input Modules do not share power. Redundant AC Power Input Module #1 is
the primary AC Power Input Module. Redundant AC Power Input Module #2 is the backup AC Power Input
Module.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be of the
same input voltage, output rating, and efficiency rating. If non-matching power supplies are installed, you
may receive an error message and/or experience operational issues with your server.
NOTE: Recommend to select 900W for 2P configurations or check power advisor for power consumption
for the customer usage case. Power specifications and technical content for all HPE Server power supplies
can be found at http://www.hp.com/go/proliant/powersupply.
NOTE: Must select 2 processor if 2 graphic cards are selected.
s
NOTE: Must select 900W power supply when 2 graphic cards are selected.
NOTE: Must select HPE ML150 Gen9 GPU Enablement Kit (779863-B21) if
NOTE: Only the above listed Graphics cards are HPE standard supported options in this server.
NOTE: The NVIDIA Quadro modules and AMD FirePro W7100 are supported only on 64-bit versions
of Linux and Windows operating systems as well as on Virtual Machine client operating systems. The
supported bare metal operating systems are RHEL6, SLES 11 and Windows Server 2012 R2.
NOTE: Please see the HPE Power Advisor for estimated power consumption of your individual system
configuration prior to installing GPUs. The HPE Power Advisor is located
at: http://www.hp.com/go/hppoweradvisor.
s
NOTE: Must be selected when a PCIe card is installed with any Networking,
Controllers (SAS, SCSI and Fiber Channel), and Graphic options.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Core Options
Page 30
NOTE: HPE ML150 Gen9 PCI BAFFLE Kit (779861-B21) is included while
order Performance Model with H240 Storage Controller.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Additional Options
Page 31
information.
Embedded
HPE iLO Advanced
HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU
BD505A
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU
E6U59ABE
HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server
LTU
512485-B21
HPE Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle
Single Server FIO LTU
C6N36A
HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU
E6U64ABE
HPE Insight Control including 1yr 24x7 Technical Support and Updates 1-server
C6N27A
HPE Insight Management Media Kit
C6N31A
HPE iLO Essentials
HPE iLO Essentials including 3yr 24x7 Tech Support and Updates 1-server LTU
BD774A
HPE iLO Essentials including 1yr 24x7 Tech Support and Updates 1-server LTU
BD775A
HPE iLO Essentials including 3yr 24x7 Technical Support and Updates E-LTU
E6U61ABE
HPE iLO Essentials including 1yr 24x7 Technical Support and Updates E-LTU
HP Smart Array P440/2GB FBWC 12Gb 1-port Int SAS Controller
820834-B21
HP Smart Array P440/4GB FBWC 12Gb 1-port Int SAS Controller
726821-B21
HP Smart Array P441/4GB FBWC 12Gb 2-ports Ext SAS Controller
726825-B21
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int SAS Controller
NOTE: 16SFF is limited to P840.
726897-B21
HP Smart Array P841/4GB FBWC 12Gb 4-ports Ext SAS Controller
726903-B21
HP Smart Array P440/4GB FBWC 12Gb 1-port Int FIO SAS Controller
761872-B21
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard
Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional
Management
LTU
Clusters
HPE Security
Controllers
NOTE: These part numbers can be used to purchase one certificate for multiple
licenses and support with a single activation key. Each license is for one node
(server). Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key. Customer also will
receive a support agreement.
NOTE: HPE Trusted Platform Module 2.0 Option works with Gen9 servers with
UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8
servers or earlier generation variants.
NOTE: HPE Gen9 servers purchased earlier may need the latest firmware
update to be compatible with the TPM 2.0 Option.
NOTE: HPE server systems can have a TPM module (of any type) installed only
once. It cannot be replaced with any other TPM module.
NOTE: Smart Storage Battery included.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Additional Options
Page 32
HP Smart Array P840/4GB FBWC 12Gb 2-ports Int FIO SAS Controller
761874-B21
SAS Controller Options
HP 96W Smart Storage Battery with 145mm Cable for DL/ML/SL Servers
727258-B21
HPE Host Bus Adapter
HP H240 12Gb 2-ports Int Smart Host Bus Adapter
726907-B21
HP H241 12Gb 2-ports Ext Smart Host Bus Adapter
726911-B21
HP H240 12Gb 2-ports Int FIO Smart Host Bus Adapter
761873-B21
HPE Cable Options
HP ML150 Gen9 Mini SAS H240 Cable Kit
784606-B21
HP ML150 Gen9 Mini SAS P440/P840 Cable Kit
784608-B21
Optional Software
HPE SmartCache No Media 24x7 Technical Support 1-server LTU
D7S26A
HPE SmartCache No Media 24x7 Technical Support Flexible LTU
D7S27A
HPE SmartCache No Media 24x7 Technical Support E-LTU
D7S27AAE
Battery Holder
HP ML150 Gen9 Smart Storage Battery Holder Kit
786710-B21
NOTE: Must select battery holder P/N: 786710-B21 when purchasing
the P440.
NOTE: B140i can't mix with any standup internal controller.
NOTE: HPE ML150 Gen9 Mini SAS P440/P840 Cable Kit must be selected P/N:
784606-B21 for P440 controller (1 cable kit is required for P440x1).
NOTE: HPE ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required
when ordering the H240 controller card.
NOTE: Smart Storage Battery included.
NOTE: B140i can't mix with any standup internal controller.
NOTE: Must select the P840/4G FIO Controller when an additional drive cage is
selected.
NOTE: Must select P840/4G Controller when apply 16SFF.
NOTE: Must select battery holder whenpurchase P440 P/N: 786710-B21.
NOTE: HPE ML150 Gen9Mini SAS P440/P840 Cable Kit must be selected P/N:
784606-B21 for P840 controller (2 cable kits are required for P840x1).
NOTE: HPE ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required when
ordering a controller card.
NOTE: Must select for H240 controller when selecting a Tape Drive.
NOTE: Cable Rule:
1 cable kit is required for Hot Plug 4LFF.
2 cable kits are required for below:
- Hot Plug 4+4 LFF (with additional drive cage)
- 8SFF
NOTE: If H240 is the primary controller and if HPE Mfg FIO Enable HBA Mode Setting is selected,
then RAID is not allowed.
NOTE: B140i can't mix with any standup internal controller.
NOTE: HPE ML150 Gen9 PCI BAFFLE Kit (779861-B21) is required when ordering a controller
card.
NOTE: HPE SmartCache is supported when one of the supported Smart Array
Controllers is installed in the server.
NOTE: HPE SmartCache comes standard (no licensing is required) if the HPE
Smart Array P840 Controller is installed in the server.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Additional Options
Page 33
HPE Tape Backup
NOTE: For the complete range of tape drives, autoloaders, libraries and media
and software compatibility of HPE disk backup products see:
Disk Enclosures
HP D6000 w/35 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 140TB Bundle
E7W30A
HP D6000 w/70 4TB 6G SAS 7.2K LFF Dual Port MDL HDD 280TB Bundle
E7W31A
HP D6000 Dual I/O Module Disk Enclosure
QQ695A
HP D6000 w/35 2TB 6G SAS 7.2K LFF Dual port MDL HDD 70TB Bundle
QQ697A
see: http://www.hp.com/go/tape. For hardware and software compatibility of HPE tape backup
products http://www.hpe.com/storage/BURAcompatibility.
NOTE: Must select SAS controller to support internal SAS tape drives.
NOTE: Tape drive and HDD total amount can't exceed SAS controller support qty.
NOTE: Limited to H240 when select Tape Drive.
Tape Drives
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
HPE Disk Backup
For the complete range of RDX drives and media see: http://www.hp.com/go/rdx. For hardware
HPE Disk Storage
Systems
.
http://www.hp.com/storage/SPOCK.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Additional Options
Page 34
HP D6000 w/70 2TB 6G SAS 7.2K LFF Dual port MDL HDD 140TB Bundle
QQ698A
HP D6000 w/35 3TB 6G SAS 7.2K LFF Dual port MDL HDD 105TB Bundle
QQ699A
HP D6000 w/70 3TB 6G SAS 7.2K LFF Dual port MDL HDD 210TB Bundle
QQ700A
HPE D6000 w/70 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 560TB
Bundle
M0T59A
HPE D6000 w/35 8TB 12G SAS 7.2K LFF (3.5in) Dual Port MDL HDD 280TB
Bundle
for information on additional options and product specifications.
HPE Tower UPS
HPE T750 G4 UPS Models
HPE T750 G4 NA/JP Uninterruptible Power System
J2P85A
HPE T750 G4 INTL Uninterruptible Power System
J2P88A
HPE T1000 G4 UPS Models
HPE T1000 G4 NA/JP Uninterruptible Power System
J2P86A
HPE T1000 G4 INTL Uninterruptible Power System
J2P89A
HPE T1500 G4 UPS Models
HPE T1500 G4 NA/JP Uninterruptible Power System
J2P87A
HPE T1500 G4 INTL Uninterruptible Power System
J2P90A
HPE Rack/Tower UPS
HPE R/T2200 G4 UPS Models
HPE R/T2200 G4 NA/JP Uninterruptible Power System
J2R00A
HPE R/T3000 G4 UPS Models
HPE R/T3000 G4 Low Voltage NA/JP Uninterruptible Power System
J2R01A
HPE R/T3000 G4 High Voltage NA/JP Uninterruptible Power System
J2R02A
HPE R/T3000 G4 High Voltage INTL Uninterruptible Power System
J2R04A
R1500 G4 Models
HPE R1500 G4 NA Uninterruptible Power System
J2Q99A
HPE R1500 G4 JP/TWN Uninterruptible Power System
J2R05A
HPE R1500 G4 INTL Uninterruptible Power System
J2R03A
R7000 Uninterruptible Power System (UPS)
HPE R7000 4U 50A High Voltage NA/JP Uninterruptible Power System
AF462A
HPE R7000 4U IEC-32A High Voltage INTL Uninterruptible Power System
AF463A
R5000 Uninterruptible Power System (UPS)
HPE R5000 3U L630 High Voltage NA/JP Uninterruptible Power System
AF460A
HPE R5000 3U IEC309-32A High Voltage INTL Uninterruptible Power System
AF461A
HPE USB and SD
HPE Enterprise Mainstream Flash Media Kits for Memory Cards
HPE 32GB microSD Mainstream Flash Media Kit
700139-B21
HPE 8GB microSD Enterprise Mainstream Flash Media Kit
726116-B21
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
737953-B21
HP Dual 8GB microSD Enterprise Midline USB Kit
741279-B21
HPE Support
HPE Installation ML350e/ML150 Service
U6D41E
HPE Startup ML350e/ML150 Service
U6D43E
NOTE: Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs
NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.
Options
Services
Installation & Start-up Services
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Additional Options
Page 40
Foundation Care
HPE 3 year Foundation Care 24x7 ML150 Gen9 Service
U7WR1E
HPE 3 year Foundation Care 24x7 wDMR ML150 Gen9 Service
U7WR2E
HPE 3 year Foundation Care 24x7 wCDMR ML150 Gen9 Service
U7WR3E
Proactive Care
HPE 3 year Proactive Care 24x7 ML150 Gen9 Service
U7WT8E
HPE 3 year Proactive Care 24x7 with DMR ML150 Gen9 Service
U7WT9E
HPE 3 year Proactive Care 24x7 with CDMR ML150 Gen9 Service
U7WU0E
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Memory
Page 41
Memory
General Memory Population Rules and Guidelines:
.
Install DIMMs only if the corresponding processor is installed.
.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
.
To maximize performance, it is recommended to balance the total memory capacity between all
installed processors and load the channels similarly whenever possible.
.
When two processors are installed, balance the DIMMs across the two processors.
.
White DIMM slots denote the first slot to be populated in a channel.
.
Place the DIMMs with the highest number of ranks in the white slot when mixing DIMMs of different
.
Do not mix RDIMMs or LRDIMMs.
.
Quad rank RDIMMs are not supported in HPE ProLiant ML150 Gen9 servers.
.
Quad rank LRDIMMs are capable of up to three DIMMs per channel.
.
RDIMMs operating at 1.2V.
.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
.
The maximum memory speed is a function of the memory type, memory configuration, and processor
model.
.
The maximum memory capacity is a function of the memory type and number of installed processors.
.
To realize the performance memory capabilities listed in this document, HPE SmartMemory is required.
.
There are four (4) channels per processor; eight (8) channels per server. There are three (2) DIMM
DIMMs that are closest to the processor.
Intel Gen9 Supported Memory Bandwidth for HPE ProLiant Gen9 Intel® Xeon® E5-2600v4 Series Processor Family
Memory Bandwidth and Capacity
Population
guidelines
ranks on the same channel.
slots for each memory channel; twenty-four (16) total slots. Memory channels1 and 3 consists of the
two (2) DIMMs that are furthest from the processor. Memory channel 2 and 4 consists of the two (2)
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Memory
Page 42
[DIMM Type]
Registered DIMMs (RDIMMs)
Load Reduced
HPE SKU P/N
805347-B21
805349-B21
836220-B21
805351-B21
805353-B21
DIMM Rank
Single Rank
Single Rank
Dual Rank
Dual Rank
Dual Rank
DIMM Capacity
8GB
16GB
16GB
32GB
32GB
Voltage
Std Voltage 1.2V
Std Voltage 1.2V
Std Voltage 1.2V
Std Voltage 1.2V
Std Voltage 1.2V
DRAM Depth [bit]
1G
2G
1G
2G
2G
DRAM Width [bit]
x8
x4
x4
x4
x4
DRAM Density
8Gb
8Gb
4Gb
8Gb
8Gb
CAS Latency
17-17-17
17-17-17
17-17-17
17-17-17
17-17-17
DIMM Native Speed (MT/s)
2400
2400
2400
2400
2400
SLOTS THAT CAN BE POPULATED
16 slot servers
16
16
16
16
16
MAXIMUM CAPACITY (GB)
128
256
256
512
512
POPULATED DIMM SPEED (MT/s)
1 DIMM Per Channel
2400
2400
2400
2400
2400
2 DIMM Per Channel
2133
2133
2133
2133
2400
3 DIMM Per Channel
n/a
n/a
n/a
n/a
n/a
DIMM slot and
DIMM slot and configuration diagrams
• Population order; start with "A" first, "B" second, "C" third, etc.
• When one processor is installed, install DIMMs in sequential alphabetic order: A, B, C, D, E, F.
• When two processors are installed, install DIMMs in sequential alphabetic order: CPU1-A, CPU2-
NOTE: Capacity references are rounded to the common gigabyte (GB) values.
• 4GB = 4,096MB
• 8GB = 8,192MB
• 16GB = 16,384MB
1. Capacity: 4GB/8GB/16GB/32GB
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Memory
Page 44
3. Data width: x4 = 4-bit; x8 = 8-bit
4. Memory generation: DDR4
5. Maximum memory speed: 2133 MT/s
6. CAS latency: P = 15
7. DIMM type: R = RDIMM (registered); L = LRDIMM (load reduced)
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Storage
Page 45
4-bay LFF non-hot-plug drive model
1-8
8 x LFF SATA/SSD Non-hot-plug Hard Drive Bays
9-10
Media Bays
NOTE: When populating 10 LFF, not able to
Tape Drive (Full/Half).
8-bay LFF hot-plug drive model
1 x 1-8
8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays
2 x 1-8
8 x LFF SAS/SSD Hot Pluggable Hard Drive Bays
4-bay LFF hot-plug drive model
1 x 1-4
Bays
install Tape Drive or Optical Drive. Possible
Configurations: 1) 8LFF +1 ODD+ 1 Tape Drive
(Full/Half), or 2) 9LFF + 1ODD, or 3) 9LFF + 1
4 x LFF SATA/SSD Hot Pluggable Hard Drive
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Storage
Page 46
2 x 1-4
4 x LFF SATA/SSD Hot Pluggable Hard Drive
Bays
Maximum Storage Capacity -
Total (10 LFF Drive)
80 TB
Total (16 SFF Drive)
61.44 TB
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Technical Specifications
Page 47
System Unit
Tower
17.03(H) x 7.87(W) x 24.41(D) in (43.26 x 20 x 62 cm)
Tower Weight
Minimum:
32lb (14.51kg)
Maximum:
64lb (29.10kg)
Input
Range Line
Current
100 to 240 VAC
For 550W Power Supply:6.7 A (at 100 VAC)3.3 A (at 200
VAC)
Rated Input
47 to 63 Hz
Rated Input
For 550 W Power Supply:< 670 W (at 100 VAC),< 660 W (at
200 VAC),
BTU Rating
Maximum
For 550 W Power Supply:2201 BTU/hr (at 100 VAC),2153
BTU/hr (at 200 VAC)
Power
To review typical system power ratings use the Power Advisor which is available via
Example: ML150 Gen9-Follow the instructions of the next screens.
Power Supply
Rated Steady-
For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200
VAC)
Maximum Peak
For 550 W Power Supply:550 W (at 100 VAC),550 W (at 200
VAC)
System Inlet
Standard
10° to 35°C (50° to 95°F) at sea level with an altitude derating
every 1000 ft) above sea
fan fault or above 30°C (86°F).
Extended Ambient
above 900 m (2953 ft) to a maximum
approved hardware configurations
Dimensions
Requirements
(for Standard
460W
PSU, see power
specifications
tables
for detail on
460W,
750W and
1200W
power supplies)
Specifications
Output
Temperature
Voltage
Rated Input
Frequency
Power
the online tool located at URL: http://www.hp.com/go/proliant-energy-efficient
or http://www.hp.com/go/hppoweradvisor - Click on the system of interest.
State Power
Power
Operating Support
of 1.0°Cper every 304.8 m (1.8°F per
level to a maximum of 3048 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The
upper limit and rate of change may be limited by the type and
number of options installed. System performance during
standard operating support may be reduced if operating with a
For approved hardware configurations, the supported system
Operating Support
inlet range is extended to be: 5° to 10°C (41° to 50°F) and
35° to 40°C (95° to 104°F) at sea level with an altitude
derating of 1.0°C per every 175m (1.8°F per every 574 ft)
above 900 m (2953 ft) to a maximum of 3048m (10,000 ft).
The approved hardware configurations for this system are
listed at the URL: http://www.hp.com/servers/ashrae
For approved hardware configurations, the supported system
inlet range is extended to be: 40° to 45°C (104° to 113°F) at
sea level with an altitude derating of 1.0°C per every 125 m
(1.8°F per every 410 ft)
of 3048 m (10,000 ft). The
for this system are listed at the
URL: http://www.hp.com/servers/ashrae
System performance may be reduced if operating in the
extended ambient operating range or with a fan fault.
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Technical Specifications
Page 48
NOTE: Supports A3 extended ambient, A4 extended
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is
20°C/hr(36°F/hr).
Relative
Operating
Minimum to be the higher (more moisture) of -12°C (10.4°F)
humidity.
Non-operating
5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum
wet bulb temperature, non-condensing.
Altitude
Operating
3048 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change
rate is 457m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude change rate is
457m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared
Idle
L WAd
3.8 Bels (1P LFF Non Hot-Plug Entry)
3.8 Bels (1P LFF Hot-plug Base)
4.3 Bels (1P SFF Hot-plug Performance)
L pAm
22 dBA (1P LFF Non Hot-Plug Entry)
22 dBA (1P LFF Hot-plug Base)
25 dBA (1P SFF Hot-plug Performance)
Operating
L WAd
3.8 Bels (1P LFF Non Hot-Plug Entry)
3.8 Bels (1P LFF Hot-plug Base)
4.1 Bels (1P SFF Hot-plug Performance)
L pAm
23 dBA (1P LFF Non Hot-Plug Entry)
22 dBA (1P LFF Hot-plug Base)
25 dBA (1P SFF Hot-plug Performance)
NOTE:
Additional options may result in increased sound levels.
NOTE: Product conformance to cited product specifications is based on sample
eligible to bear the appropriate compliance logos and statements.
HPE Dynamic
Number of PCI
links
Four
PCI link rate
4Gb/s
ambience will be available in early 2015.
Humidity
dew point or 8% relative humidity. Maximum to be the lower
(less moisture) of24°C (75.2°F) dew point or 90% relative
average bystander position A-Weighted sound pressure levels (LpAm) when the
product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
Configurations tested for 1P LFF Entry models included two (2) 500GB
LFF SATA Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: Configurations tested for 1P and 2P SFF models included two (2) 500GB
SFF SATA Midline HDD and Windows 2012 Enterprise 64-bit.
NOTE: The Listed sound levels apply to standard shipping configurations.
Classification
Standards
CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
(type) testing, evaluation, or assessment. This product or family of products is
Smart Array B140i
Controller
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Technical Specifications
Page 49
Storage protocol
SATA
SAS/SATA peak
rate
6Gb/s
Number of
SAS/SATA links
10 links
SAS/SATA
connectivity
2x4 connectors; 2x1 connectors
Expander
support
No
Drives supported
(max)
Up to 10 Internal Drives
RAID support
0, 1, 10, 5 SATA
Software
management
HPE SSA, SMH, SIM
Warranty
Server warranty
HPE Secure
license
Not Supported
HPE SmartCache
License
Not Supported
HPE Smart
Administrator
Supported
HPE Ethernet 1Gb
Network
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer
Method
PCI Express, two lanes (x2)
Controller
BCM5717
Network
10Base-T (HalfDuplex)
10 Mb/s per port, 40 Mb/s combined
10Base-T (FullDuplex)
20 Mb/s per port, 80 Mb/s combined
100Base-TX (HalfDuplex)
100 Mb/s per port, 400 Mb/s combined
100Base-TX (FullDuplex)
200 Mb/s per port, 800 Mb/s combined
100Base-TX (HalfDuplex)
1000 Mb/s per port, 4000 Mb/s combined
100Base-TX (FullConnector
RJ-45
Cable Support
10 Base-T
Categories 3, 4 or 5 UTP; up to 328 ft (100 m)
10/100/1000 Base-TX
Category 5 or higher UTP; up to 328 ft (100 m)
support
data transfer
Encryption
4-port 331i
Adapter
Storage
Interface
Transfer Rate
Duplex) 2000 Mb/s per port, 8000 Mb/s combined
QuickSpecs
HPE ProLiant ML150 Generation9 (Gen9)
Technical Specifications
Page 50
Environment-
End-of-life
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling
programs, in many geographic
Hewlett Packard Enterprise will be recycled, recovered or disposed of in a
responsible manner.
The E
treatment information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett Packard
Enterprise web site. These ins
treatment facilities as well as Hewlett Packard Enterprise OEM customers who
integrate and re
HPE Memory and HPE Disk Storage Systems
were updated.
2-Sep-2014
From Version 1 to 2
Added
Added HPE Insight Software section and
Network controller sections.
Added new HPE Drives and new G4 UPS
models.
Changed
HPE Processors, HPE Memory, HPE Drives, HPE
Tape Backup, HPE Disk Backup, HPE Rack
Mount Consoles, KVM Switches, and
HPE Uninterruptible Power Systems (UPS), and
HPE USB and SD Options were updated.