HPE 751465-B21 Getting Started Guide

QuickSpecs
HPE Virtual Connect 16Gb 24-
port Fibre Channel
Module for c-Class BladeSystem

Overview

Page 1
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem
The HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem is a new class of blade interconnect that simplifies server connections by cleanly separating the server enclosure from the SAN. It simplifies the process of connecting servers to fibre channel networks by reducing cables and your SAN switch management domain, and by allowing you to change servers in just minutes.
You can reduce costs and simplif replace and recover server resources on yet provides all the key benefits of integrated switching including high performance 16Gb uplinks to the SAN. The integrated design frees up rack space, reduces power and cooling requirements, and reduces cables and small form Enhanced N
support with external Brocade switches provides higher bandwidth to enable demanding applications and
high density server virtualization.
The Hardware Support.
Figure 1 HPE Virtual Connect 16Gb 24-Port Fibre Channel Module Front View
1.
Ejector
4.
Reset Pinhole
2.
Port ID Indicator
5.
Module Status Indicator
3.
Port Link/Activity Indicator
6.
Module Locator (UID)
Models
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem
751465-B21
HPE Virtual Connect 16Gb 24-port Fibre Channel TAA Module for c-Class BladeSystem
778720-B21
1 2 3 4 5
6
y connections to SANs, consolidate your network connections and enable administrators to add,
-the-fly. Being standards-based it looks like a pass-thru device to the fibre channel network,
-factor pluggable transmitters.
-port trunking
HPE Virtual Connect 16Gb 24-port Fibre Channel Module is protected by HPE Services 3-Years Next Business Day 9x5
QuickSpecs
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-
Class
BladeSystem

Supported Products

Page 2
Compatibility
The HPE Virtual Connect 16Gb 24-port Fibre Channel Module requires Virtual Connect Firmware v4.40 and
HPE BladeSystem
HPE ProLiant Servers:
ional information on required firmware versions and to download firmware upgrades, see the
Fibre Channel Host
HPE ProLiant BL c-
HPE BladeSystem c-Class c7000 Enclosure with Onboard Administrator:
versions and to download firmware upgrades, see the
HPE B-Series
SN8000B Director Switch (Enterprise)
8/8 SAN Switch
supports the following hardware.
ProLiant and Integrity Servers
Bus Adapters (HBA)
Gen9 ProLiant Servers (16Gb and 8G support via 16G HBAs): BL460, BL660
Gen8 ProLiant Servers (16Gb and 8G support via 16G HBAs, 8G support via 8G HBAs): BL460,
BL465, BL660
Gen7 ProLiant Servers (8Gb support via 8G HBAs): BL460c, BL490c, BL465c, BL685, BL620c,
BL680c
HPE Integrity Servers:
HPE Integrity BL860x i2 Server series
HPE Integrity BL860c i4 Server series
HPE Integrity BL870c i2 Server series
HPE Integrity BL870c i4 Server series
HPE Integrity BL890c i4 Server series
HPE Integrity BL860c i6 Server series
HPE Integrity BL870c i6 Server series
HPE Integrity BL890c i6 Server series
For the latest addit Hewlett Packard Enterprise website: https://www.hpe.com/us/en/products/servers/smart-update.html
QLogic QMH2672 16Gb FC HBA, Emulex LPe1605 16Gb FC HBA
QLogic QMH2572 8Gb FC HBA, Emulex LPe1205A 8Gb FC HBA
QLogic QMH2562 8Gb FC HBA, Emulex LPe1205 8Gb FC HBA, Brocade 804 8Gb FC HBA
Class Server Blade Enclosures
HPE BLc7000 Platinum Enclosure (16G and 8G support)
HPE BLc7000 Enclosure (8G only support)
NOTE: The HPE BladeSystem c7000 Platinum Enclosure is required to permit 16 Gbps speed on the internal ports. Other HPE BladeSystem c7000 Enclosures will have a maximum speed of 8 Gbps. NOTE: The Virtual Connect 16Gb 24-port Fibre Chanel modules are supported on c7000 enclosures with the following SKUs: 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21. 5XXXXX-XXX has been discontinued, but the module is supported in these deployed enclosures. NOTE: VC 16Gb 24-port modules are not supported in BladeSystem c3000 enclosures.
For the latest additional information on required firmware Hewlett Packard Enterprise website: https://www.hpe.com/us/en/products/servers/smart-update.html
Switches
SN6500B Fibre Channel Switch (High-end) SN6000B Fibre Channel Switch (Midmarket) SN3000B Fibre Channel Switch (Entry) DC SAN Backbone Director DC04 SAN Director 8/80 SAN Switch 8/40 SAN Switch 8/24 SAN Switch
QuickSpecs
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-
Class
BladeSystem
Supported Products
Page 3
Embedded switch for HPE 4400 Enterprise Virtual Array
Virtual Connect
Supported by Virtual Connect Enterprise Manager (VCEM) 7.4.1 and higher for centralized connection and
comprehensive collection of firmware and system software components, all tested together as a single solution
https://www.hpe.com/us/en/products/servers/smart-update.html
Encryption SAN Switch Brocade 8Gb SAN Switch for HPE c-Class BladeSystem Brocade 4Gb SAN Switch for HPE c-Class BladeSystem 4/8 SAN Switch 4/16 SAN Switch 4/32B SAN Switch 4/64 SAN Switch 4/256 SAN Director HP Storageworks MSA2324fc
Enterprise Manager
workload management for hundreds of Virtual Connect domains. Learn more at:
http://www.hpe.com/info/vcem
HPE Service Pack for ProLiant Gen 9 Servers: Version 2014.09.0 or greater.
The HPE Service Pack for ProLiant (SPP) with HPE Smart Update Manager (HPE SUM) as the deployment engine provides a comprehensive approach to firmware and system software maintenance. The SPP is a
stack that include drivers, agents, utilities, firmware packages for HPE ProLiant servers, controllers, storage, blades and enclosures, and other options. It is available on all supported HPE ProLiant Gen 9 and Gen 8 servers (HPE ProLiant SL/ML/DL/BL 100, 200, 300, 500, 700, 900 servers, and HPE CloudSystem Matrix) in addition to earlier generation HPE ProLiant servers. The SPP is released with most major HPE ProLiant server releases. To access the latest HPE Service Pack for ProLiant click here:
QuickSpecs
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-
Class
BladeSystem
Supported Products
Page 4
Supported Configurations
HPE BladeSystem c7000 Enclosure - Rear View
1. Upper Fan System
5. Interconnect Bays 7 / 8
2.
Interconnect Bays 1 /2
6.
On Board Administrator
3.
Interconnect Bays 3 / 4
7.
Lower Fan System
4. Interconnect Bays 5 / 6
8. Rear Redundant Power Complex
Mezzanines
Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for additional
c7000 Half Height Server Blade
c7000 Full Height Server Blade
The following are supported configurations for the HPE Virtual Connect 16Gb 24-Port Fibre Channel Module. Please note that
Mezzanine cards on the full height version.
Hewlett Packard Enterprise has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent management tools via the Onboard Administrator and HPE Insight Manager Software. The Onboard Administrator Guide, Enclosure Setup and Installation Guide provides detailed information on port mapping.
QuickSpecs
HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-
Class
BladeSystem
Suppor
Page 5
other interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and
s, or changes to servers which are connected to
HPE BladeSystem c7000 Enclosure
NOTE: The following tables show a number of typical, supported configurations for an HPE BladeSystem c7000 Enclosure.
[Bay 1] VC-Enet
[Bay 7] Other/empty
[Bay 2] Empty
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 7] Other/empty
[Bay 2] VC-Enet
[Bay 8] Other/empty
[Bay 1] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet*
[Bay 7] VC-FC 16G
[Bay 2] VC-Enet
[Bay 8] VC-FC 16G
* This configuration is only applicable for enclosures with full-height servers.
[Bay 1] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 7] VC-Enet
[Bay 2] VC-Enet
[Bay 8] VC-Enet
[Bay 1] VC-Enet
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 8] Empty
[Bay 1] VC-Enet [Bay 3] VC-FC 16G
[Bay 2] VC-Enet [Bay 4] VC-FC 16G
ted Products
Pass-Thru modules will operate per their default configurations. Any moves, addition non-Virtual Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual Connect Modules.
The HPE Virtual Connect 16Gb 24-Port Fibre Channel Module requires a Virtual Connect Ethernet Module installed in the system for management and administration.
[Bay 3] VC-FC 16G [Bay 5] Other/empty
[Bay 3] VC-FC 16G [Bay 5] Other/empty
[Bay 3] VC-Enet [Bay 5] VC-FC 16G
[Bay 3] VC-Enet [Bay 5] VC-FC 16G
[Bay 3] VC-FC 16G [Bay 5] VC-Enet
[Bay 4] Empty [Bay 6] Other/empty
[Bay 4] VC-FC 16G [Bay 6] Other/empty
[Bay 4] VC-Enet [Bay 6] VC-FC 16G
[Bay 4] VC-Enet [Bay 6] VC-FC 16G
[Bay 4] VC-FC 16G [Bay 6] VC-Enet
[Bay 3] VC-FC 16G [Bay 5] VC-Enet
[Bay 3] Other/empty [Bay 5] VC-FC 16G
[Bay 4] VC-FC 16G [Bay 6] VC-Enet
[Bay 4] Other/empty [Bay 6] VC-FC 16G
Loading...
+ 9 hidden pages