c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 1
HP ProLiant BL460c Gen8 Server Blade
HP ProLiant BL460c Generation 8 (Gen8) Server Blade
1.
Two (2) PCIe 3.0 mezzanine I/O expansion slots
7.
Up to two (2) Intel® Xeon® E5-2600 family processors
2.
FlexibleLOM adapter
8.
Internal USB 2.0 and Trusted Platform Module (TPM)
connectors
3.
MicroSDHC card connector
9.
Two (2) small form factor (SFF) hot-plug drive bays
4.
FlexibleLOM connectors (supporting one (1) FlexibleLOM)
10.
HP c-Class Blade SUV (Serial, USB, VGA) connector
5.
Sixteen (16) DDR3 DIMM slots (8 per processor)
11.
HP Smart Array P220i Controller with 512MB FBWC
6.
HP Smart Array P220i Controller connector
12.
Access panel
What's New
Support for HP Oneview Software License
Support for HP Secure Encryption, a data security option for the HP Smart Array P731m and the P230i Controllers
New HP SmartMemory 24GB @1333 Memory low voltage option kit (761501-B21)
Support for HP FlexFabric 20Gb 2-port 630 FLB FlexibleLOM
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 2
NOTE: This document covers the HP ProLiant BL460c Gen8 server blade only. For information on HP BladeSystems c-Class
Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
NOTE: The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future c-Class server blades will be supported in the existing enclosures.
NOTE: The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components at
NOTE: For optimal cooling and system performance the BL460c Gen8 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE: For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual Connect are
required and available via the HP Service Pack for ProLiant, please see http://www.hp.com/go/spp/download.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
NOTE: The Intel Xeon E5-2600 Processor Family cannot be configured with the new 1866MHz HP Smart
Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the E5-2643 v2, or the
E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration, there are twelve (12) total available
DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please reference the
'Memory Speed by Processor Model' table in the Memory section of the QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on
the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number indicates the
Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is socket/segment designation, 00 =
Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen8 supports one or two processors.
NOTE: The BL460c Gen8 includes two I/O mezzanine expansion slots. A processor must be installed in
processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A processor must be
installed in processor slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the E5-
2603 and E5-2609.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum speed memory
can operate. Please see the see the "Memory" section later in this document.
NOTE: The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the HP RBSU, 1.35V DIMMs
can be changed to operate at 1.5V.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 4
Cache Memory
One of the following
depending on Model
30MB (1x30MB) L3 cache
NOTE: For Twelve-core processors.
25MB (1x25MB) L3 cache
NOTE: For Six, Eight or Ten-core processors.
20MB (1x20MB) L3 cache
NOTE: For Eight-core processors.
15MB (1x15MB) L3 cache
NOTE: For Quad or Six-core processors.
10MB (1x10MB) L3 cache
NOTE: For Quad-core processors.
5MB (1x5MB) Level 3 cache
NOTE: For Dual-core processors.
Chipset
Intel® C600 Series Chipset
Intel® E5-2600 and 2600v2 Processor Families
NOTE: For more information regarding Intel chipsets, please see the following:
http://www.intel.com/products/server/chipsets/.
Upgradeability
Upgradeable to two (2) processors
NOTE: Processor upgrade available from Intel® Xeon® Processors E5-2600 to E5-2600 v2. Please contact HP
Technology Sales (http://www.hp.com/support), your local HP Re-seller, or reference the following Customer
Advisory: ProLiant Servers-Instructions for Upgrading an HP ProLiant Gen8 Server from an Intel Xeon
Processor E5-2600 to an Intel Xeon Processor E5-2600 v2, regarding critical details before upgrading. An
explanation of requirements and limitations are provided.
On System
Management Chipset
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo
Memory Protection
Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Lockstep Mode
Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM), or Unbuffered ECC (UDIMM)
Standard (Pre-configured
Models)
64GB (8 x 8GB) DDR3 1600MHz RDIMMs at 1.5V
64GB (4 x 16GB) DDR3 1866MHz RDIMMs at 1.5V
32GB (4 x 8GB) DDR3 1600MHz RDIMMs at 1.5V
32GB (2 x 16GB) DDR3 1866MHz RDIMMs at 1.5V
32GB (4 x 8GB) DDR3 1333MHz RDIMMs at 1.35V
32GB (2 x 16GB) DDR3 1600MHz RDIMMs at 1.35V
16GB (2 x 8GB) DDR3 1866MHz RDIMMs at 1.5V
16GB (4 x 4GB) DDR3 1333MHz RDIMMs at 1.35V
16GB (2 x 8GB) DDR3 1600MHz RDIMMs at 1.35V
Maximum (LRDIMM)
512GB (16 x 32GB) up to 1333MHz at 1.35V
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 5
Maximum (RDIMM)
256GB (16 x 16GB) up to 1866MHz at 1.5V
384GB (16 x 24GB) up to 1333MHz at 1.35V
Maximum (UDIMM)
128GB (16 x 8GB) up to 1600MHz at 1.5v
NOTE: HP memory from previous generation servers are not qualified or warranted with this server. HP
SmartMemory is required to realize the memory performance improvements and enhanced functionality
listed in this document for Gen8. For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a
server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.
NOTE: The Intel Xeon E5-2600 Processor Family cannot be configured with the new 1866MHz HP Smart
Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1866MHz, 1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at: http://www.hp.com/go/ddr3memory-configurator.
Network Controller
One of the following
depending on Model
One (1) HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM, HP FlexFabric 10Gb 2-port 554FLB FlexibleLOM, HP
FlexFabric 20Gb 2-port 650FLB DlexibleLOM, or HP FlexFabric 20Gb 2-port 630FLB FlexibleLOM
NOTE: Supports FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, iSCSI boot, and
autosensing 20Gb/10Gb/1Gb Ethernet.
NOTE: Each port is autosensing 1Gb/10Gb/20Gb, and can interoperate with 1Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
NOTE: FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module. Fibre Channel over
Ethernet (FCoE) is supported with the HP 10GbE Pass-Thru Module, HP 6120XG Blade Switch with the CEE
license installed, HP Cisco B22HP Fabric Extender and HP Cisco B22HP Fabric Extender with 16 FET for
BladeSystem c-Class. Learn more at: http://www.hp.com/go/bladesystem/interconnects
One (1) HP Flex-10 10Gb 2-port 530FLB FlexibleLOM
One (1) HP Ethernet 10Gb 2-port 560FLB FlexibleLOM
NOTE: FlexibleLOMs are not compatible with prior generation c-Class server blades
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard Administrator (with
10/100/1000 Mbps) to BladeSystem link is 1Gbps
Expansion Slots
Two (2) I/O expansion mezzanine slots:
x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE: This expansion slot supports dual-port mezzanine cards: one port is routed to interconnect
module bay 3 and the other to bay 4.
x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE: This expansion slot supports dual-port and quad-port mezzanine cards. For dual-port cards,
one port is routed to interconnect module bay 5 and the other to bay 6. For quad-port cards, one
port is routed to interconnect module bay 5, one to bay 6, one to bay 7, and one to bay 8.
NOTE: A second processor must be installed (in processor slot 2) to have access to the second
expansion slot (expansion slot 2).
1Gb Ethernet server adapter mezzanine options for additional network ports.
Dual-port 8Gb and 16Gb Fibre Channel HBA for SAN connectivity.
QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.
I/O accelerator mezzanine options for high transaction rate local storage
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 6
HP Server ROM
HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This signature is
verified before the flash process starts, reducing accidental programming and preventing malicious efforts to
corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed
to the customer-installed operating system. The ROM also provides the capability of booting from various
fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization
progress via an attached monitor. If configuration or hardware errors are discovered during this early phase
of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally,
these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in
diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
http://www.hp.com/support/rbsu
Storage Controller
All BTO Models
One (1) HP Smart Array P220i Controller with 512MB Flash-Backed Write Cache (FBWC)
supporting RAID 0 and RAID 1.
NOTE: Upgradeable firmware with recovery ROM.
NOTE: The HP Smart Array P220i supports two (2) small form factor (SFF) hot plug
drive bays.
NOTE: The server supports up to a combined total of two (2) FBWC supercap options.
NOTE: The HP Smart Array P220i Controller FIO Kit (690164-B21) comes included with
the HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(641016-B21). However when choosing the HP ProLiant BL460c Gen8 E5-v2 10Gb
FlexibleLOM Configure-to-order Blade Server (735151-B21), the HP Smart Array P220i
Controller FIO Kit (690164-B21) must be added separately as part of the Server Blade
Configuration Process.
Maximum Internal
Storage
One of the following
depending on Model
Hot Plug SFF SAS
4.0TB
2 x 2.0TB
Hot Plug SFF SATA
4.0TB
2 x 2.0TB
Hot Plug SFF SAS SSD
3.2TB
2 x 1.6TB
Hot Plug SFF SATA
SSD
3.2TB
2x1.6TB
NOTE: The ProLiant BL460c Gen8 server includes the new HP hot plug small form factor (SFF) SmartDrive
carrier for enhanced management and reduced maintenance errors. HP drives from previous generation
servers are not compatible with the ProLiant BL460c Gen8 drive bays.
Interfaces
Micro SDHC Slot
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot
USB 2.0 Port
One (1) internal USB 2.0 connector for USB flash media drive keys
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 7
NOTE: The above options are for integrated hypervisor virtualization environments needing a low cost boot
solution with the highest performance and reliability.
NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L-10600R
(DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.
Industry Standard
Compliance
ACPI 2.0
Microsoft® Logo certifications
USB 2.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)
Active Directory v1.0
PCIe 3.0
Operating Systems
and Virtualization
Software Support
for ProLiant Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page:
http://www.hp.com/support/BL460cGen8
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c
Gen8 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c
Gen8 servers plugged horizontally.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard
Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
16 MB Flash Video Memory
256 MB DDR 3 with ECC (112 MB after ECC and video)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 8
Form Factor
HP ProLiant BL460c Gen8 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures.
On System
Management
HP iLO Management
Engine
HP iLO Management Engine is a comprehensive set of embedded management
features supporting the complete lifecycle of the server, from initial deployment,
through ongoing management, to service alerting and remote support. HP iLO
Management Engine comes standard on all HP ProLiant Gen8 servers. The HP iLO
Management Engine portfolio includes:
HP iLO: The HP iLO management processor is the core foundation for other
capabilities within HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring and
alerting capability without OS agents, that starts working the moment a
power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for increased
stability and shorter downtimes; 100% configuration history; Health and
service alerts and easy export and upload to Service and Support.
HP Intelligent Provisioning: Lets customers provision and configure a single
server without any separate media. No more SmartStart CDs or Smart Update
Firmware DVD are needed.
o To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot
process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at
http://www.hp.com/go/intelligentprovisioning for
additional information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at
http://www.hp.com/go/spp to get firmware and software
updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage your
server anytime from anywhere from select smartphones and mobile devices.
For additional information please visit: http://www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO Management
Engine technologies whitepaper
HP Insight
management
software
HP Service Pack for
ProLiant (SPP)
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide a
comprehensive approach to firmware and system software maintenance. Together
they provide better operating stability and ensure maximum uptime. The SPP will be
updated at a predictable cadence, typically coinciding with new HP server hardware
launches. By enabling firmware to be updated online and integrating firmware and
system software updates in one operation, HP SUM and the SPP offer faster updates of
individual servers and dramatically faster updates of entire BladeSystem enclosures.
Further improving system uptime and stability is the fact that HP provides 12 months
of support for each Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved in several ways,
starting with the web download. A single web page provides access to a single
download containing both the latest version of HP SUM and the latest SPP. Optional
smaller subsets with only specific types of servers or specific operating systems are
offered to save on download time. The HP SUM application provides a straightforward,
intuitive user interface that guides the user through the steps of discovery, analyses
and update, providing comprehensive information on available updates, criticality and
interdependencies. This information is also available in reports. By providing the
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 9
option of multiple local or shared repositories which can be easily updated from
hp.com, HP SUM provides the tools to optimize stability and consistency throughout
the company. While HP SUM and the SPP recommend the combinations of firmware
and system software that HP has found to be the best practice, the application gives
customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific attention for
interaction between firmware, drivers and agents both within the server as well as in
interaction with the BladeSystem enclosure components (Onboard Administrator and
Virtual Connect). This testing ensures the highest quality as well as providing the input
for HP SUM to deploy updates taking into account all interdepencies, when
determining the correct updates and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be downloaded from
www.hp.com/go/spp/download. More information can be found:
http://www.hp.com/go/SmartUpdate, http://www.hp.com/go/spp and
http://www.hp.com/go/hpsum
Security
Power-on password
Administrator's password
Keyboard password (QuickLock)
HP iLO 4 On System Management Chipset with:
o SSL encryption
o Secure Shell version 2
o Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
o AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
Availability
Memory
Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit
error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires
lockstep mode).
Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and
switches operation to the spare rank.
Memory Lockstep mode is used to correct a single x8 DRAM device failure on a DIMM. The DIMMs in
each paired memory channel must have identical HP part numbers.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing
the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve
service time and overall system availability.
Mezzanine options and I/O
Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards each
supporting multiple data paths routed to redundant interconnect modules.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Standard Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 10
Two (2) Small Form Factor hot-plug SAS/SATA/SSD drive bays.
Integrated HP Smart Array P220i Controller with 512MB FBWC, RAID 0 and 1 support, and
upgradeable firmware with recovery ROM capability.
Optional HP D2200sb Storage Blade for direct attachment of up to 12 drives to an adjacent blade
within the c-Class enclosure.
Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
Processor internal sensors & thermal control protection against over-temperature conditions.
Cache parity/ECC protects cache data from accidental data corruption.
Machine Check Architecture (MCA) detects and captures hardware errors such as system bus,
memory ECC, parity, and cache, and improves service time.
Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It
uses BIST (built-in self-test) results to detect a failure and disables the target core-pair upon
subsequent boot.
Server Blade Enclosure Infrastructure
Pooled power for true N+N power redundancy through up to six (6) hot-plug, high-efficiency,
common slot enclosure-based power supplies (configuration dependent).
Up to ten (10) redundant enclosure-based hot-plug HP Active Cool fans that scale to meet future
demands and optimize airflow, reduce power draw, and improve acoustic performance.
Dual grid power providing redundant rack enclosure power feeds to the server blade enclosure.
HP Dynamic Power Saver Mode the total enclosure power consumption is monitored in real time and
automatically adjusted with changes in demand for improved efficiency and reliability.
HP Dynamic Power Capping safely limits power usage without impacting performance by capping
peak usage instead of average power usage, removes risk to electrical infrastructure with a fast-
acting, hardware-based capping algorithm, and reclaims more power by dynamically controlling
power limits based on workload demand.
Up to eight interconnect modules per server blade enclosure providing four simultaneous redundant
fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass Thru Ethernet, etc.
Enclosure crosslinks between adjacent enclosures to provide interconnect module-to-module
connections or as Virtual Connect module stacking links.
Optional enclosure redundant Onboard Administrator system management module.
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network
of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year
warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy
replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR
parts at no charge. Additional information regarding worldwide limited warranty and technical support is
available at http://h17007.www1.hp.com/us/en/enterprise/servers/warranty/index.aspx#.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Optional Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 11
Fibre Channel
Support
Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HP ProLiant BL460c Gen8.
Compatible SAN
HP ProLiant BL460c Gen8 server blades are optimized for HP MSA, EVA and XP.
HP ProLiant BL460c Gen8 server blades are compatible with select 3rd party SANs. Please see blade storage
page for more details at
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 technology makes maximum use of
network bandwidths, provide dynamic tuning and enable extreme flexibility to meet individual server and
infrastructure requirements by allocating up to 4 network connections per server port. Virtual Connect
FlexFabric modules extend those capabilities to allocate one function per port to storage connections. HP
Virtual Connect Enterprise Manager (VCEM) provides server management software with a central console to
administer network connections and workloads for thousands of servers. For more information on Virtual
Connect Enterprise Manager, see http://www8.hp.com/h20195/v2/GetPDF.aspx/c04154443.pdf. For more
information on Virtual Connect Ethernet, Fibre Channel, Converged Network and management options, see
http://www.hp.com/go/virtualconnect.
HP Insight
management
software
HP Insight Control
HP Insight Control, a product option, delivers essential infrastructure management
that can help save time and money by making it easy to deploy, migrate, monitor,
remote control, and optimize your IT infrastructure through a single, simple
management console. For more information, see
http://www.hp.com/go/insightcontrol.
HP Insight Control includes one year of 24 x 7 HP Software Technical Support and
Update Service ensuring rapid access to HP support staff and proactive delivery of
software updates. For more information about this service, see
http://www.hp.com/services/insight.
HP Matrix Operating
Environment
The HP Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers is
an integrated command center that helps you instantly adjust to dynamic business
demands. This advanced infrastructure management software lets you reduce the
cost of common data center tasks by up to 40 percent while keeping pace with your
changing business.
The HP Matrix OE includes the automated provisioning, optimization, and recovery
management capabilities for HP CloudSystem Matrix, the ideal platform for private
cloud and Infrastructure as a Service (IaaS). For more information, see
http://www.hp.com/go/matrixoe.
HP iLO Scale-Out
The HP iLO Scale-Out license ideal for web/hosting/cloud service providers and High
Performance Computing environments. This license is a specific subset of iLO
Advanced functionality, provides fast remote access through Text Console via SSH,
lower operational cost with Dynamic power capping, and faster time to resolution
through Email-based Alerting and proactive notifications. With this newly designed HP
iLO Scale-Out HPC customers now have a server management package solely design
and priced for their massive data environments. HP iLO Scale-Out is available on all HP
ProLiant Gen8 SL platforms.
For more information, see: http://www.hp.com/go/iLO/scale-out
HP iLO Advanced
HP iLO management processors for HP ProLiant Gen8 servers virtualizes system
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Optional Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 12
License for ProLiant
Servers
controls to help simplify server setup, engage health monitoring and power and
thermal control, and promote remote administration. HP iLO functions out-of-the-box
without additional software installation and functions regardless of the servers' state
of operation. The HP iLO can be accessed from any location via a web browser and
works hand-in-hand with HP Systems Insight Manager, Insight Control, and Matrix
Operating Environment, helping customers unleash the value of the ProLiant platform
and deliver the highest possible quality of IT service to the business.
Advanced functionality, such as graphical remote console, multi-user collaboration,
and video record/playback can be activated with the optional HP iLO Advanced or HP
iLO Advanced for BladeSystem licenses. The Advanced licensed features offer
sophisticated remote administration of servers in dynamic data center and remote
locations and can help significantly reduce cost associated with IT-related travel and
unplanned downtime.
NOTE: For more information, visit http://www.hp.com/go/ilo.
HP OneView
The HP OneView architecture combines server, storage, and networking with control of datacenter
environmentals into a single, integrated management platform. Architected to deliver lifecycle management
for the complete Converged Infrastructure, it facilitates collaboration, removes friction, collapses cycle
times, eliminates error-prone work, and accelerates time to value. HP OneView v1.0 combines management
of servers and virtual connect with open integration to automate and customize existing tools and processes.
With OneView, you'll work smarter-with greater visibility and control-and fully capitalize on the benefits of a
Converged Infrastructure.
For more information on HP OneView management, see: http://www.hp.com/go/oneview.
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated large-scale
ProLiant clusters optimized for High Performance Computing, with a choice of servers,
networks and software. Operating system options include specially priced offerings
for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft
Windows HPC Server. A Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC) interconnect technologies are available for this
server as part of the HP Cluster Platform portfolio. These high-speed InfiniBand and
Gigabit interconnects are fully supported by HP when integrated within an HP cluster.
Flexible, validated solutions can be defined with the help of configuration tools.
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HP-supported suite
of tools that are used for lifecycle management of hyperscale clusters of Linux
ProLiant systems. CMU includes software for the centralized provisioning,
management and monitoring of nodes. CMU makes the administration of clusters user
friendly, efficient, and effective. http://www.hp.com/go/cmu
Storage Software
Whether you need to solve a specific data protection, archiving, or storage command and control challenge,
or deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HP storage
software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets
and respond faster to business opportunities.
Storage software that gets the job done:
Data Protection and Recovery Software
Whether you're a large enterprise or a smaller business, HP data protection and recovery software
will cost-effectively protect you against disaster and ensure business continuity.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Optional Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 13
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently accessed or
less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the command
and control foundation you need to efficiently manage and visualize your physical and virtual
environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery, testing,
application development and reporting.
Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables hardware-
specific configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or
Microsoft Hyper-V virtualized server. This server model starting November 2013, includes a limited
license for HP StoreVirtual VSA software with 1TB of capacity. To download the license key and
StoreVirtual VSA software, visit: http://www.hp.com/go/unlockVSA.
NOTE: You will need your server serial number in order to complete the registration form. Fully
functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For more information
and access to the 60-day free trial, visit: http://www.hp.com/go/tryVSA
NOTE: For more information available Storage Software including QuickSpecs, please see:
http://www.hp.com/go/storage/software.
HP Insight Online
HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP
support information personalized to your IT environment. Insight Online can automatically display devices
remotely monitored by HP Insight Remote Support. With Insight Online's easy navigation you can efficiently
track your IT support contracts and device status from anywhere and at any time.
http://www.hp.com/go/insightonline
HP Proactive Insight
experience
Prevent problems with innovative, automated monitoring tools and proactive services. The HP Proactive
Insight experience consist of using Insight Online, Insight Remote Support, and Proactive Care Support
Service as one integrated solution. The Proactive Insight experience provides you with expert advice and
personalized, cloud-based automated IT support, helping to prevent unplanned down time and solve
problems quickly. For more information, visit: http://www.hp.com/go/proactiveinsightexperience
Expansion Blade
Support
Supports one (1) optional storage, tape, or PCI expansion blade.
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP servers
and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. HP products supported through Factory Express include a wide array of servers and storage: HP
Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www8.hp.com/us/en/campaigns/factory-express/server-storage-
networking.html
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Optional Features
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 14
HP Simple
Configurator
SCE is a guided self-service tool to help sales and non-technical people provide customers with initial
configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in
your existing ordering processes. If you require "custom" rack configuration or configuration for products not
available in SCE, please contact HP's Customer Business Center or an Authorized Partner for assistance.
https://h22174.www2.hp.com/SimplifiedConfig/Index
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Service and Support
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 15
Service and Support
HP Technology Services for Industry Standard Servers
HP Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HP to help prevent problems and solve issues faster. Our support technology lets you to tap into
the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere,
any time.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack Services enable you to order the right service level, length of coverage and response time as
you purchase your new server, giving you full entitlement for the term you select.
Recommended HP Care Pack Services for your HP product
Optimized Care
HP Proactive Care Advanced - 24x7 coverage, three year Care Pack Service
Achieve a higher return on your product investment with the personal attention from a locally assigned
Account Support Manager who delivers recommendations designed to improve availability and performance.
Leverage your system’s ability to connect to HP for automated problem detection and rapid critical event
management to increase stability and reduce unplanned downtime. This recommendation provides 24x7
coverage with four-hour response for hardware and two-hour callback for supported software. Collaborative
call management comes with Proactive Care Advanced or you may choose full support from HP where we
own all cases through to resolution. HP is a leading provider of support services for most operating systems
used on HP BladeSystem with long, successful partnerships with vendors such as Microsoft, Red Hat,
VMware, SUSE and others. Purchasing software support from HP simplifies troubleshooting and shortens
time to resolution with one call for hardware or software questions.
HP Proactive Care with 24x7 coverage, three year Care Pack Service
HP Proactive Care helps prevent problems and stabilize IT by utilizing secure, real-time, predictive analytics
and proactive consultations when your products are connected to HP. This Care Pack Service combines three
years’ proactive reporting and advice with our 24x7 coverage and enhanced escalation management, four
hour hardware response time and two hour call back for software questions on leading industry standard
software running on your HP ProLiant server. http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA3-
8855ENW.pdf
Related Services
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking options
to assist you in bringing your new hardware into operation in a timely and professional manner.
HP Factory Express offers configuration, customization, integration and deployment services for HP servers
and storage products. Customers can choose how their factory solutions are built, tested, integrated,
shipped and deployed. For more information on Factory Express services for your specific server model
please contact your sales representative or go to: http://www.hp.com/go/factory-express.
Data Privacy Services
Protect your data through better media management. HP Data privacy services help manage and protect
sensitive data to reduce the risk of unauthorized access to private information and help meet compliance
requirements. Our retention services allow you to keep drives and other devices upon failure, our removal
services provide convenient data sanitization and our recovery services allow you to safely retire IT assets
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Service and Support
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 16
and capture any remaining value from the hardware. http://www.hp.com/services/dataprivacy
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
Get connected to HP
to improve your
support experience
Connecting products to HP will help prevent problems with 24x7monitoring, prefailure alerts, automatic call
logging, and parts dispatch, plus current data will be available for the proactive reports that are part of
Proactive Care Services. With Connected products, you can have a dashboard to manage your IT anywhere,
anytime, from any device.
HP Support Center
Personalized online support portal with access to information, tools and experts to support HP business
products. Submit support cases online, chat with HP experts, access support resources or collaborate with
peers. Learn more http://www.hp.com/go/hpsc
HP's Support Center Mobile App** allows you to resolve issues yourself or quickly connect to an agent for live
support. Now, you can get access to personalized IT support anywhere, anytime.
HP Insight Remote Support and HP Support Center are available at no additional cost with a HP warranty, HP
Care Pack or HP contractual support agreement.
NOTE: HP Support Center Mobile App is subject to local availability.
Parts and Materials
HP will provide HP-supported replacement parts and materials necessary to maintain the
covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product
quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as
part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by HP due to malfunction.
For more
information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: http://www.hp.com/services/bladesystem
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 17
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options
section of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
shipped separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed.
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
E5-2600 v2 series Processors
HP ProLiant BL460c
Gen8 E5-2670v2 2P
64GB-R P220i/512
FBWC Server
64GB (4x 16GB) PC3-14900R (DDR3-1866) Registered DIMMS at 1.5V)
NOTE: Total of 16 DIMM slots.
Network Controller
HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM
Storage Controller
HP Smart Array P220i Controller with 512MB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB ; SATA SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-out or HP Insight Control
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 18
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
HP ProLiant BL460c
Gen8 E5-2650v2 1P
32GB-R P220i/512
FBWC Server
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 19
FBWC Server
724085-B21
Memory
32GB (2x 16GB) PC3L-12800R (DDR3-1600 Registered DIMMs at 1.35V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Network Controller
HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM
Storage Controller
HP Smart Array P220i Controller with 512MB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.0TB; SATA: 2.0TB; SAS SSD: 1.6TB
Optical Drive Bay
None
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-out or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year3-year Labor, 3-year on-site support.
HP ProLiant BL460c
Gen8 E5-2620v2 1P
16GB-R P220i/512
FBWC Server
16GB (2x 8GB) PC3L-12800R (DDR3-1600) Registered DIMMs at 1.35V)
NOTE: Total of 16 DIMM slots. Only eight (8) usable with single processor.
Network Controller
HP FlexFabric 10Gb 2-port 534FLB FlexibleLOM
Storage Controller
HP Smart Array P220i Controller with 512MB FBWC RAID 0,1
Hard Drive
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
Internal Storage
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 1.6TB; SATA SSD: 1.6TB
Optical Drive Bay
None
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 20
Expansion Slots
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports Type A and Type
B mezzanine cards.
Management
HP iLO Management Engine (standard)
Optional: HP iLO Scale-out or HP Insight Control
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000 Enclosure
Warranty
Server warranty includes 3-year Parts, 3-year Labor, 3-year on-site support.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Configuration Information - Factory Integrated Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 21
NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO server). To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c Gen8 E5-v2 10Gb/20Gb FlexibleLOM Configure-to-order Blade Server
735151-B21
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported FlexibleLOMs
(see Step 2)
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported FlexibleLOMs
(see Step 2)
One (1) HP Smart Array P220i Controller with 512MB FBWC and RAID 0 and 1 support
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
NOTE: The HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(641016-B21) cannot be configured the new 1866MHz HP Smart Memory or the new
1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: The HP Smart Array P220i Controller FIO Kit (690164-B21) comes included with the
HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server (641016-B21).
However, when choosing the HP ProLiant BL460c Gen8 E5-v2 10Gb FlexibleLOM Configureto-order Blade Server (735151-B21), the HP Smart Array P220i Controller FIO Kit (690164B21) must be added separately as part of the Server Blade Configuration Process.
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
NOTE: All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1) processor.
NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one xxxxxx-
B21 in Step 4.
E5-2600 v2 series Processors
HP BL460c Gen8 Intel® Xeon® E5-2697v2 (2.7GHz/12-core/30MB/130W) FIO Processor Kit
718045-L21
HP BL460c Gen8 Intel® Xeon® E5-2695v2 (2.4GHz/12-core/30MB/115W) FIO Processor Kit
718054-L21
HP BL460c Gen8 Intel® Xeon® E5-2690v2 (3.0GHz/10-core/25MB/130W) FIO Processor Kit
718055-L21
HP BL460c Gen8 Intel® Xeon® E5-2680v2 (2.8GHz/10-core/25MB/115W) FIO Processor Kit
718056-L21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Configuration Information - Factory Integrated Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 22
HP BL460c Gen8 Intel® Xeon® E5-2670v2 (2.5GHz/10-core/25MB/115W) FIO Processor Kit
718057-L21
HP BL460c Gen8 Intel® Xeon® E5-2667v2 (3.3GHz/8-core/25MB/130W) FIO Processor Kit
718366-L21
HP BL460c Gen8 Intel® Xeon® E5-2660v2 (2.2GHz/10-core/25MB/95W) FIO Processor Kit
718058-L21
HP BL460c Gen8 Intel® Xeon® E5-2650v2 (2.6GHz/8-core/20MB/95W) FIO Processor Kit
718358-L21
HP BL460c Gen8 Intel® Xeon® E5-2650Lv2 (1.7GHz/10-core/25MB/70W) FIO Processor Kit
718364-L21
HP BL460c Gen8 Intel® Xeon® E5-2643v2 (3.5GHz/6-core/25MB/130W) FIO Processor Kit
718367-L21
HP BL460c Gen8 Intel® Xeon® E5-2640v2 (2.0GHz/8-core/20MB/95W) FIO Processor Kit
718359-L21
HP BL460c Gen8 Intel® Xeon® E5-2637v2 (3.5GHz/4-core/15MB/130W) FIO Processor Kit
718368-L21
HP BL460c Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) FIO Processor Kit
718360-L21
HP BL460c Gen8 Intel® Xeon® E5-2630Lv2 (2.4GHz/6-core/15MB/60W) FIO Processor Kit
718365-L21
HP BL460c Gen8 Intel® Xeon® E5-2620v2 (2.1GHz/6-core/15MB/80W) FIO Processor Kit
718361-L21
HP BL460c Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) FIO Processor Kit
718362-L21
HP BL460c Gen8 Intel® Xeon® E5-2603v2 (1.8GHz/4-core/10MB/80W) FIO Processor Kit
718363-L21
E5-2600 series Processors
HP BL460c Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W) FIO Processor Kit
662064-L21
HP BL460c Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) FIO Processor Kit
662065-L21
HP BL460c Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) FIO Processor Kit
662069-L21
NOTE: The Intel Xeon E5-2600 Processor Family cannot be configured with the new
1866MHz HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the E52643 v2, the E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration, there
are twelve (12) total available DIMM slots.
NOTE: For the maximum supported memory speeds for each processor listed above, please
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE: The BL460c Gen8 supports one or two processors.
NOTE: The BL460c Gen8 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot
1). A processor must be installed in processor slot 2 for access to the second mezzanine
expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2603 and E5-2609.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum
speed memory can operate. Please see the see the "Memory" section later in this document.
NOTE: The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the HP
RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
HP Memory
NOTE: The HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(641016-B21) cannot be configured the new 1866MHz HP Smart Memory or the new
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Configuration Information - Factory Integrated Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 23
1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: HP memory from previous generation servers are not qualified or warranted with this
HP ProLiant BL460c Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for Gen8.
For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and
LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this
document.
NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4
PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage FIO Memory Kits (700404-B21)
are used.
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v2 series Processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
713981-B21
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
708637-B21
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
731765-B21
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
731761-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Configuration Information - Factory Integrated Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 24
Unbuffered with ECC DIMMs (UDIMMs) - E5-2600 series Processors
HP 2GB (1x2GB) Single Rank x8 PC3-12800E (DDR3-1600) Unbuffered CAS-11 Memory Kit
669320-B21
HP 2GB (1x2GB) Single Rank x8 PC3L-10600E (DDR3-1333) Unbuffered CAS-9 Low Voltage
Memory Kit
Load Reduced DIMMs (LRDIMMs) - E5-2600 series Processors
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
647903-B21
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed memory
configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator.
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory" section
later in this document and the Online Memory Configuration Tool for details at:
http://www.hp.com/go/ddr3memory-configurator.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this
document.
NOTE: For more information on ProLiant Energy Efficient Features, see:
http://www.hp.com/go/proliant-energy-efficient
NOTE: PC3L is a low voltage memory.
HP Networking
FlexibleLOM Adapters
NOTE: The server requires one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors. All FlexibleLOMs are dual port: One port is routed to interconnect module bay 1
and the other to bay 2.
10/20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2P 650FLB FIO Adapter
700764-B21
HP FlexFabric 20Gb 2-port 630FLB FIO Adapter
700066-B21
HP Ethernet 10Gb 2-port 560FLB FIO Adapter
684214-B21
HP FlexFabric 10Gb 2-port 554FLB FIO Adapter
684212-B21
HP FlexFabric 10Gb 2-port 534FLB FIO Adapter
700742-B21
HP Flex-10 10Gb 2-port 530FLB FIO Adapter
684211-B21
HP Ethernet 10Gb 2-port 570FLB Adapter
718939-B21
HP Ethernet 10Gb 2-port 570FLB FIO Adapter
718940-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information:
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Configuration Information - Factory Integrated Models
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 25
HP Insight Software
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single Server FIO
License
C6N36A
NOTE: The HP Smart Array P220i Controller FIO Kit (690164-B21) comes included with the
HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server (641016-B21).
However when choosing the HP ProLiant BL460c Gen8 E5-v2 10Gb FlexibleLOM Configureto-order Blade Server (735151-B21), the HP Smart Array P220i Controller FIO Kit (690164B21) must be added separately as part of the Server Blade Configuration Process.
Converged
Infrastructure
Management
Software
HP OneView with iLO Advanced - Server hardware required on same purchase order
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
E5Y43AAE
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
F6Q89A
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle 1 Svr E-LTU
F6Q89AAE
HP Storage
Controllers
HP Smart Array P220i Controller FIO Kit
690164-B21
HP Smart Array P230i/512 6Gb FIO SAS Controller
735062-B21
NOTE: When ordering the HP ProLiant BL460c Gen8 E5v2 10Gb FlexibleLOM Configure-toorder Blade Server (PN 735151-B21) please choose the HP Smart Array P220i/512 FIO
Controller (PN 690164-B21) or the HP Smart Array P230i/512 6Gb FIO Controller (PN
735062-B21). When ordering the HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-toorder Blade Server (PN 641016-B21) the HP Smart Array P220i FIO Controller (PN 690164B21) ships standard.
HP Storage Blades
HP D2220sb Configure-to-order Storage Blade
QW918A
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options and
Additional sections below; or the following:
NOTE: For optimal cooling and system performance the BL460c Gen8 Server Blade requires the c7000 enclosure to be configured
with 10 fans and the c3000 enclosure to be configured with 6 fans.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 26
HP Networking
NOTE: Each 10/20 Gigabit Ethernet adapter requires a minimum of 2GB of server memory.
NOTE: A 20 Gigabit Ethernet adapter supports linking at 1Gbps, 10Gbps, or 20Gbs when
connected to an interconnect module with 20Gb Ethernet downlinks.
NOTE: A 10/20 Gigabit Ethernet adapter supports linking at only 1Gbps when connected to
an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10/20 Gigabit Ethernet adapters on each server blade connect to a 10/20Gb
interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP BladeSystem
c3000 Enclosure).
10/20Gb Ethernet Mezzanines
HP FlexFabric 20Gb 2P 650M Adapter
700767-B21
HP FlexFabric 20Gb 2-port 630M Adapter
700076-B21
HP Ethernet 10Gb 2-port 570M Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
NOTE: The server supports one (1) FlexibleLOM that is installed in the FlexibleLOM
connectors and is already included in the pre-configured models. However, it must be added
in Step 2 for Configure-to-Order Models. The FlexibleLOM options below are used to change
these original FlexibleLOMs.
10/20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2P 650FLB Adapter
700763-B21
HP FlexFabric 20Gb 2-port 630FLB Adapter
700065-B21
HP Flex-10 10Gb 2-port 530FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at
656590-B21
HP FlexFabric 10Gb 2-port 534FLB Adapter
NOTE: Please see QuickSpecs for technical specifications and additional information at:
700741-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in any other mezzanine slot, both ports are
active.
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
644160-B21
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
644161-B22
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and
may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
702213-B21
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure and
InfiniBand QuickSpecs at:
HP BL460c Gen8 Intel® Xeon® E5-2697v2 (2.7GHz/12-core/30MB/130W) Processor Kit
718045-B21
HP BL460c Gen8 Intel® Xeon® E5-2695v2 (2.4GHz/12-core/30MB/115W) Processor Kit
718054-B21
HP BL460c Gen8 Intel® Xeon® E5-2690v2 (3.0GHz/10-core/25MB/130W) Processor Kit
718055-B21
HP BL460c Gen8 Intel® Xeon® E5-2680v2 (2.8GHz/10-core/25MB/115W) Processor Kit
718056-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 28
HP BL460c Gen8 Intel® Xeon® E5-2670v2 (2.5GHz/10-core/25MB/115W) Processor Kit
718057-B21
HP BL460c Gen8 Intel® Xeon® E5-2667v2 (3.3GHz/8-core/25MB/130W) Processor Kit
718366-B21
HP BL460c Gen8 Intel® Xeon® E5-2660v2 (2.2GHz/10-core/25MB/95W) Processor Kit
718058-B21
HP BL460c Gen8 Intel® Xeon® E5-2650v2 (2.6GHz/8-core/20MB/95W) Processor Kit
718358-B21
HP BL460c Gen8 Intel® Xeon® E5-2650Lv2 (1.7GHz/10-core/25MB/70W) Processor Kit
718364-B21
HP BL460c Gen8 Intel® Xeon® E5-2643v2 (3.5GHz/6-core/25MB/130W) Processor Kit
718367-B21
HP BL460c Gen8 Intel® Xeon® E5-2640v2 (2.0GHz/8-core/20MB/95W) Processor Kit
718359-B21
HP BL460c Gen8 Intel® Xeon® E5-2637v2 (3.5GHz/4-core/15MB/130W) Processor Kit
718368-B21
HP BL460c Gen8 Intel® Xeon® E5-2630v2 (2.6GHz/6-core/15MB/80W) Processor Kit
718360-B21
HP BL460c Gen8 Intel® Xeon® E5-2630Lv2 (2.4GHz/6-core/15MB/60W) Processor Kit
718365-B21
HP BL460c Gen8 Intel® Xeon® E5-2620v2 (2.1GHz/6-core/15MB/80W) Processor Kit
718361-B21
HP BL460c Gen8 Intel® Xeon® E5-2609v2 (2.5GHz/4-core/10MB/80W) Processor Kit
718362-B21
HP BL460c Gen8 Intel® Xeon® E5-2603v2 (1.8GHz/4-core/10MB/80W) Processor Kit
718363-B21
E5-2600 series Processors
HP BL460c Gen8 Intel® Xeon® E5-2690 (2.9GHz/8-core/20MB/135W) Processor Kit
662076-B21
HP BL460c Gen8 Intel® Xeon® E5-2680 (2.7GHz/8-core/20MB/130W) Processor Kit
662063-B21
HP BL460c Gen8 Intel® Xeon® E5-2670 (2.6GHz/8-core/20MB/115W) Processor Kit
662064-B21
HP BL460c Gen8 Intel® Xeon® E5-2667 (2.9GHz/6-core/15MB/130W) Processor Kit
667804-B21
HP BL460c Gen8 Intel® Xeon® E5-2665 (2.4GHz/8-core/20MB/115W) Processor Kit
667803-B21
HP BL460c Gen8 Intel® Xeon® E5-2660 (2.2GHz/8-core/20MB/95W) Processor Kit
662065-B21
HP BL460c Gen8 Intel® Xeon® E5-2650 (2.0GHz/8-core/20MB/95W) Processor Kit
662066-B21
HP BL460c Gen8 Intel® Xeon® E5-2650L (1.8GHz/8-core/20MB/70W) Processor Kit
662078-B21
HP BL460c Gen8 Intel® Xeon® E5-2643 (3.3GHz/4-core/10MB/130W) Processor Kit
662072-B21
HP BL460c Gen8 Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/95W) Processor Kit
662067-B21
HP BL460c Gen8 Intel® Xeon® E5-2637 (3.0GHz/2-core/5MB/80W) Processor Kit
662077-B21
HP BL460c Gen8 Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/95W) Processor Kit
662068-B21
HP BL460c Gen8 Intel® Xeon® E5-2630L (2.0GHz/6-core/15MB/60W) Processor Kit
662079-B21
HP BL460c Gen8 Intel® Xeon® E5-2620 (2.0GHz/6-core/15MB/95W) Processor Kit
662069-B21
HP BL460c Gen8 Intel® Xeon® E5-2609 (2.4GHz/4-core/10MB/80W) Processor Kit
662070-B21
HP BL460c Gen8 Intel® Xeon® E5-2603 (1.8GHz/4-core/10MB/80W) Processor Kit
667805-B21
NOTE: The Intel Xeon E5-2600 Processor Family cannot be configured with the new
1866MHz HP Smart Memory or the new 1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: DIMM slots 4 and 5 are not accessible when either the E5-2690, the E5-2643, the E52643 v2, the E5-2637 v2, or the E5-2667 v2 is used. In a 2 processor configuration, there
are twelve (12) total available DIMM slots
NOTE: For the maximum supported memory speeds for each processor listed above, please
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 8, 7, 6, 5, 4, 3, 2 or 1 core(s) active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed
may depend on the quantity and type of DIMMs installed.
NOTE: Up to 2 processors supported. Mixing different processor models is not supported.
NOTE: For the Intel® C600 Chipset E5-2600 Series, the letter preceding the model number
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 29
NOTE: The BL460c Gen8 supports one or two processors.
NOTE: The BL460c Gen8 includes two I/O mezzanine expansion slots. A processor must be
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot
1). A processor must be installed in processor slot 2 for access to the second mezzanine
expansion slot (expansion slot 2).
NOTE: All processors within the server must be identical.
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2603 and E5-2609.
NOTE: The letter "L" following the model number indicates denotes lower wattage.
NOTE: The processor model as well as the memory configuration determines the maximum
speed memory can operate. Please see the see the "Memory" section later in this document.
NOTE: The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V. Using the HP
RBSU, 1.35V DIMMs can be changed to operate at 1.5V.
HP Memory
NOTE: The HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(641016-B21) cannot be configured the new 1866MHz HP Smart Memory or the new
1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: HP memory from previous generation servers are not qualified or warranted with this
HP ProLiant BL460c Gen8 Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for Gen8.
For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and
LRDIMM.
NOTE: A minimum of one DIMM is required per server.
NOTE: For additional memory rules and guidelines, see the "Memory" section later in this
document.
HP SmartMemory
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-2600 v2 series Processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
713981-B21
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
708637-B21
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
731765-B21
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
731761-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
647901-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Load Reduced DIMMs (LRDIMMs) - E5-2600 series Processors
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
647903-B21
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory" section
later in this document and the Online Memory Configuration Tool for details at
http://www.hp.com/go/ddr3memory-configurator.
HP Hard Drives
NOTE: The ProLiant BL460c Gen8 server includes the new HP hot-plug small form factor
(SFF) SmartDrive carrier for enhanced management and reduced maintenance errors. HP
drives from previous generation servers are not compatible with the BL460c Gen8 drive
bays.
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is
not supported.
NOTE: HP hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
NOTE: The hard drive options are not required when configuring a drive-less model.
NOTE: 12G SAS hard drives will only operate at 6G speeds in a ProLiant BL460c Gen8
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 31
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
655710-B21
HP 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
655708-B21
NOTE: Please see the QuickSpecs for technical specifications and additional information at
HP 600GB 12G SAS 15K rpm SFF (2.5-inch) SC 512e Enterprise 3yr Warranty Hard Drive
748387-B21
HP 1TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765464-B21
HP 1.8TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 512e 3yr Warranty Hard Drive
791034-B21
HP 2TB 12G SAS 7.2K rpm SFF (2.5-inch) SC 512e 1yr Warranty Hard Drive
765466-B21
12G SAS High Endurance Hot Plug SFF (2.5-inch) Enterprise Performance Solid State
Drives
HP 400GB 12G SAS High Endurance SFF 2.5-in SC Enterprise Performance 3yr Wty Solid
State Drive
NOTE: This drive supports Gen8 servers only.
741155-B21
12G SAS Hot Plug SFF (2.5-inch) SC ENT HDD
HP 1.2TB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781518-B21
HP 900GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
785069-B21
HP 600GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
781516-B21
HP 300GB 12G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive
785067-B21
6G SATA 2.5in WI-PLP SC SSD
HP 1.2TB 6Gb SATA 2.5in WI-PLP SC SSD
804677-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 32
HP 800GB 6Gb SATA 2.5in WI-PLP SC SSD
804671-B21
HP 400GB 6Gb SATA 2.5in WI-PLP SC SSD
804665-B21
HP 200GB 6Gb SATA 2.5in WI-PLP SC SSD
804639-B21
6G SATA 2.5in MU-PLP SC SSD
HP 1.6TB 6Gb SATA 2.5in MU-PLP SC SSD
804631-B21
HP 800GB 6Gb SATA 2.5in MU-PLP SC SSD
804625-B21
HP 480GB 6Gb SATA 2.5in MU-PLP SC SSD
832414-B21
HP 200GB 6Gb SATA 2.5in MU-PLP SC SSD
804613-B21
6G SATA 2.5in RI-PLP SC SSD
HP 1.6TB 6Gb SATA 2.5in RI-PLP SC SSD
804605-B21
HP 800GB 6Gb SATA 2.5in RI-PLP SC SSD
804599-B21
HP 480GB 6Gb SATA 2.5in RI-PLP SC SSD
804593-B21
HP 240GB 6Gb SATA 2.5in RI-PLP SC SSD
804587-B21
HP 120GB 6Gb SATA 2.5in RI-PLP SC SSD
804581-B21
HP 80GB 6Gb SATA 2.5in RI-PLP SC SSD
804575-B21
6G SATA VE Hot Plug SFF(2.5-inch) SC EV G1 Solid State Drives
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
756657-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
756636-B21
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State
Drive
756621-B21
6G SATA LE Hot Plug SFF (2.5-inch) SC EL G1 Solid State Drives
HP 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State
Drive
756601-B21
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Boot Solid State Drives
NOTE: These drives support Gen8 servers only.
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State Drive
717965-B21
HP 80GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Boot 3yr Wty Solid State Drive
734360-B21
6G SATA VE Hot Plug SFF (2.5-inch) SC EV Solid State Drives
HP 1.6TB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
757339-B21
6G SATA Value Endurance Hot Plug SFF (2.5-inch) Enterprise Value Solid State Drives
NOTE: These drives support Gen8 servers only.
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
717973-B21
HP 600GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
739898-B21
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
717971-B21
HP 300GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
739888-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
717969-B21
6G SATA Value Endurance SFF (2.5-inch) SC Enterprise Value M1 Solid State Drives
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Core Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 33
HP 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
764923-B21
HP 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
764925-B21
HP 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
764927-B21
HP 800GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty M1 Solid State
Drive
764929-B21
6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives
HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691868-B21
HP 400GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691866-B21
HP 200GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691864-B21
HP 100GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty
Solid State Drive
691862-B21
6G SATA Read Intensive (2.5-inch) SC G2 Solid State Drive
HP 240GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
789135-B21
HP 480GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
789145-B21
HP 960GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
789155-B21
12G SAS ME SFF (2.5-inch) SC Enterprise Mainstream H2 Solid State Drives
HP 1.6TB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
779176-B21
HP 200GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
779164-B21
HP 400GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
779168-B21
HP 800GB 12G SAS Mainstream Endurance SFF 2.5-in ENT Mainstream SC 3yr Wty H2 Solid
State Drive
779172-B21
12G SAS VE SFF (2.5-inch) SC EV Solid State Drives
HP 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
762263-B21
HP 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive
762261-B21
NOTE: The mixing of standard SAS drives with SAS SSD is supported within the server, but
limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is
not supported
NOTE: Please see the QuickSpecs for technical specifications and information at
12G SAS Write Intensive SFF (2.5-inch) SC 3yr Wty H2 Solid State Drive
HP 200GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802578-B21
HP 400GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802582-B21
HP 800GB 12G SAS Write Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802586-B21
HP 1.92TB 12G SAS Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive
802891-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Additional Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 34
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server License
C6N27A
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License
C6N28ABE
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO Electronic
License
C6N36ABE
HP Insight Control Server Provisioning Media Kit
BD883A
HP Insight Management Media Kit
C6N31A
NOTE: HP Insight Management Media Kit contains DVDs without licenses. Contains HP
Systems Insight Manager, HP Insight Control, HP Matrix Operating Environment, and
Virtual Connect Enterprise Manager software. Uses an integrated installer to perform
quick and accurate software installation and updates.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple licenses
with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7
HP Software Technical Support Service.
NOTE: Licenses ship without media. The HP Insight Management Media Kit can be ordered
separately, or can be downloaded at http://www.hp.com/go/insightupdates
NOTE: For additional license kits, please see the QuickSpecs at:
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and Updates ELTU
E6U63ABE
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and Updates
BD502A
HP iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and Updates ELTU
E6U60ABE
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
512488-B21
HP Integrated Lights-Out (iLO)
HP iLO Scale Out
HP Integrated Lights-Out Scale-Out 3yr 24x7 Tech Support and Updates Flex Quantity
License
BD776A
HP Integrated Lights-Out Scale-Out 1yr 24x7 Tech Support and Updates Flex Quantity
License
BD778A
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates Flex Qty
E-LTU
BD776AAE
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates Flex Qty
E-LTU
BD778AAE
HP Integrated Lights-Out Scale-Out including 3yr 24x7 Tech Support and Updates
Tracking License
BD777A
HP Integrated Lights-Out Scale-Out including 1yr 24x7 Tech Support and Updates
Tracking License
BD779A
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three years
of 24 x 7 HP Software Technical Support Service.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Additional Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 35
NOTE: For additional license kits, including electronic delivery options, please see the iLO
QuickSpecs at http://www.hp.com/go/iLO
NOTE: Customer will receive a license entitlement certificate, which must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one or three year
of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits, please see the QuickSpecs at:
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
QL803B
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE: These part numbers can be used to purchase one certificate for multiple licenses
and support with a single activation key. Each license is for one node (server). Customer
will receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in order to
obtain a license key. Customer also will receive a support agreement.
BD476A
HP Insight Cluster Management Utility Media
NOTE: For additional license kits please see the QuickSpecs at
HP 1.2TB Multi Level Cell IO Accelerator for BladeSystem c-Class
QK763A
HP 785GB Multi Level Cell IO Accelerator for BladeSystem c-Class
QK762A
HP 365GB Multi Level Cell IO Accelerator for BladeSystem c-Class
QK761A
HP 1.2TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
794603-B21
HP 1.6TB Read Intensive Mezzanine PCIe Workload Accelerator for BladeSystem c-Class
794605-B21
HP Security
HP Trusted Platform Module Option
488069-B21
NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can include passwords,
certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a
data protection feature available in Windows Server® 2008 and 2012. BitLocker leverages
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Additional Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 36
the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The
TPM works with BitLocker to help protect user data and to ensure that a server running
Windows Server 2008 and 2012 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM
deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
HP Storage
Controllers
HP Smart Array P721m Controller
HP Smart Array P721m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
650072-B21
HP Smart Array P721m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
655636-B21
HP Smart Array P731m Controller
HP Smart Array P731m/2GB FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
698535-B21
HP Smart Array P731m/512 FBWC 6Gb 4-ports Ext Mezzanine SAS Controller
698536-B21
NOTE: Please see the QuickSpecs for Technical Specifications and additional information
at
HP Secure Encryption No Media Flexible License per Drive
D8S84A
HP Secure Encryption per Svr Entitlement
C9A82AAE
NOTE: HP Secure Encryption is supported on the HP Smart Array P731m and the P230i as
an option. HP Secure Encryption licensing is based on the number of physical drives
requiring encryption.
NOTE: For more information about HP Secure Encryption, go to
http://www.hp.com/go/hpsecureencryption.
HP InfiniBand
Mezzanines
NOTE: When an InfiniBand adapter is installed in mezzanine slot 1, only one port is active
(regardless of operating mode). When installed in any other mezzanine slot, both ports
are active.
NOTE: InfiniBand QDR and FDR speeds are only supported on the HP BladeSystem c7000
Enclosure. For additional information, please see the HP BladeSystem c7000 Enclosure
and InfiniBand QuickSpecs at:
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
644160-B21
NOTE: The QDR InfiniBand adapter may be installed in any mezzanine slot of the server.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
644161-B22
NOTE: The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode and
may be installed in any mezzanine slot if operated in any other mode.
HP InfiniBand FDR 2-port 545M Adapter
702213-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Additional Options
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 37
HP Storage Blades
HP D2220sb Build-to-order Storage Blade
QW917A
NOTE: For additional information, please see the QuickSpecs for technical specifications
and additional information at:
Proactive Care - Collaborative Support plus Proactive services delivered by the on
shore/near shore Advanced Solution Center (ASC) and backed by the global delivery
organization, end-to-end case ownership from a Technical Solution Specialists and
Technical Account Manager who remotely delivers firmware/software revision
management, proactive scans and incident trend reports. Recommended for customers
running a virtualized infrastructure and/or customers who desire an enhanced call
support experience.
HP 3 year 4 hour 24x7 ProLiant BL4xxc Proactive Care Service
U3B14E
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL4xxc Proactive Care
Service
U3B17E
HP 3 year 6 hour Call To Repair 24x7 ProLiant BL4xxc Proactive Care Service
U3B20E
HP 3 year 6hr Call To Repair 24x7 with Defective Media Retention ProLiant BL4xxc
Proactive Care SVC
U3B23E
Proactive Care Personalized Support Environmental Option - to add an onsite Account
Support Manager (ASM) to Proactive Care. ASM is an assigned resource who delivers
support planning and brings technical expertise and best practices advice for the
customer's environment.
Installation Services - reduce the time required to get your system up and running and
help minimize disruptions to your business.
HP Install c-Class Server Blade Service
UE493E
HP Hardware Installation during Non Standard Hours c-Class Server Blade Service
UG869E
Additional HP Care Pack services can be found at: http://www.hp.com/go/cpc
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Memory
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 38
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
http://www.hp.com/go/ddr3memory-configurator
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 family or Intel® Xeon® E5-2600 family processor socket contains four memory channels that support
two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for the server. Up to
32GB capacity DIMMs are supported for 512GB of memory (16 DIMM slots x 32GB per DIMM).
Memory Population Rules and Guidelines:
A minimum of one DIMM is required per processor.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity
between all installed processors and to load the channels similarly whenever possible.
RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher
voltage.
LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of
ProLiant Gen8 servers support RDIMM, UDIMM and LRDIMM.
The Intel Xeon E5-2620 processor does not support DIMMs at 1.35V.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the BL460c Gen8 Server Blade.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
For memory population rules and additional memory guidelines, please see the BL460c Gen8 user guide at
http://www.hp.com/support.
BL460c Gen8 Supported Memory Bandwidth on Intel® Xeon® E5-2600 series Processors
DIMM
Type
Registered DIMMS (RDIMMs)
Load
Reduced
(LRDIMMs)
Unbuffered with ECC DIMMs (UDIMMs)
DIMM
Rank
Single Rank (1R)
Dual Rank (2R)
Three
Rank
(3R)
Quad
Rank
(4R)
Single
Rank
(1R)
Dual
Rank
(2R)
DIMM
Capacity
4GB
4GB
8GB
8GB
8GB
16GB
16GB
24GB
32GB
2GB
2GB
4GB
4GB
8GB
8GB
DIMM
Native
Speed
(MHz)
1333
1600
1600
1333
1600
1333
1600
1333
1333
1333
1600
1333
1600
1600
1333
Voltage*
LV
Std
Std
LV
Std
LV
Std
LV
LV
LV
Std
LV
Std
Std
LV
NOTE: *LV= low voltage at 1.35V; Std = standard voltage at 1.5V.
SLOTS THAT CAN BE POPULATED
16 slot
servers
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
MAXIMUM CAPACITY (GB) *
16 slot
servers
64
64
128
128
128
256
256
384
512
32
32
64
64
128
128
POPULATED DIMM SPEED (MHz)
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Memory
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 39
1 DIMM
Per
Channel
(1DPC)
1333
1600
1600
1333
1600
1333
1600
n/a
1333**
1333
1600
1333
1600
1600
1333
2 DIMM
Per
Channel
(2DPC)
1333
1600
1600
1333
1600
1333
1600
1333****
1333**
1333***
1600
1333***
1600
1600
1333***
* Maximum capacity will vary based on individual server platform qualification schedule
**LRDIMM enables 3 DIMMs per channel. HP SmartMemory will supports up to 3DPC@DDR3-1066 at 1.35V. Third party memory
may only support 3DPC @DDR3-1066 at 1.5V.
***Using HP SmartMemory, UDIMMs at 2DPC are supported up to 1333MHz. Third party UDIMMs at 2DPC may only support up to
1066MHz.
**** Only supported on BL460c Gen8
NOTE: Maximum memory speed is a function of the processor QPI bus speed; see the table below "Memory Speed by Processor
Model".
NOTE: The internal USB 2.0 Port is not available when the HP 24GB (1x24GB) Three Rank x4 PC3L-10600R (DDR3-1333) Registered
CAS-9 Low Voltage FIO Memory Kits (700404-B21) are used.
Intel Gen8 Supported Memory Bandwidth on E5-2600v2 series Processor
DIMM
Type
Register DIMM
Load Reduced
(LRDIMMs)
Unbuffered DIMM
DIMM
Rank
Single Rank
(1R)
Single
Rank
(1R)
Single
Rank
(1R)
Dual
Rank
(2R)
Dual
Rank
(2R)
Quad
Rank
(4R)
Dual Rank (2R)
DIMM
Capacity
->
4GB
4GB
8GB
8GB
16GB
16GB
32GB
4GB
4GB
8GB
8GB
DIMM
Native
Speed
(MT/s) >
1600
1866
1600
1866
1600
1866
1866
1600
1866
1600
1866
Voltage
LV
Std
LV
Std
LV
Std
Std
LV
Std
LV
Std
SLOTS THAT CAN BE POPULATED
16 slot
servers
16
16
16
16
16
16
16
16
16
16
16
64 slot
servers#
64
64
64
64
64
64
64
n/a
n/a
n/a
n/a
MAXIMUM CAPACITY (GB) *
16 slot
servers
64
64
128
128
256
256
512
64
64
128
128
POPULATED DIMM SPEED (MT/s)
1 DIMM
Per
Channel
1600
1866
1600
1866
1600
1866
1866
1600
1866
1600
1866
2 DIMM
Per
Channel
1600
1866
1600
1866
1600
1866
1866
1600
1866
1600
1866
Memory speed is a function of the processor QPI bus speed.
* Maximum capacity will vary based on individual server platform qualification schedule
****For HP SmartMemory, UDIMM is supported at 2DPC@DDR3-1333. Third party memory may only support
up to 2DPC@DDR3-1066. Only supported on BL460c Gen8.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Memory
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 40
# All configurations on 64 slot server run at DDR3-1066.
### with IVB processor
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Memory
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 41
Memory options part number decoder
Following are memory options available from HP:
HP Memory
NOTE: The HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
(641016-B21) cannot be configured the new 1866MHz HP Smart Memory or the new
1600MHz Low Voltage (1.35v) HP Smart Memory.
NOTE: HP memory from previous generation servers are not qualified or warranted with this
HP ProLiant BL460c Gen8 Server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document for Gen8.
For additional information, please see the HP SmartMemory QuickSpecs at:
NOTE: LRDIMM, RDIMM and UDIMMs are all distinct memory technologies and cannot be
mixed within a server. The majority of ProLiant Gen8 servers support RDIMM, UDIMM and
LRDIMM.
HP SmartMemory
Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs) - E5-2600 v2 series Processors
HP 4GB (1x4GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
713981-B21
HP 4GB (1x4GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
708637-B21
HP 8GB (1x8GB) Single Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
731765-B21
HP 8GB (1x8GB) Single Rank x4 PC3-14900R (DDR3-1866) Registered CAS-13 Memory Kit
731761-B21
HP 16GB (1x16GB) Dual Rank x4 PC3L-12800R (DDR3-1600) Registered CAS-11 Low Voltage
Memory Kit
Registered DIMMs (RDIMMs) - E5-2600 series Processors
HP 4GB (1x4GB) Single Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
Memory Kit
647893-B21
HP 4GB (1x4GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
647895-B21
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600R (DDR3-1333) Registered CAS-9 Low Voltage
Memory Kit
647897-B21
HP 8GB (1x8GB) Single Rank x4 PC3-12800R (DDR3-1600) Registered CAS-11 Memory Kit
647899-B21
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Memory
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Load Reduced DIMMs (LRDIMMs) - E5-2600 series Processors
HP 32GB (1x32GB) Quad Rank x4 PC3L-10600L (DDR3-1333) Load Reduced CAS-9 Low
Voltage Memory Kit
647903-B21
NOTE: Depending on the memory configuration and processor model, 1600MHz and
1333MHz memory may operate at a lower speed. Please see the see the "Memory" section
later in this document and the Online Memory Configuration Tool for details at
http://www.hp.com/go/ddr3memory-configurator.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Storage
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 43
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD
hard drives
Teradici PCoIP®
Hardware
Accelerator
Teradici PCoIP® Hardware Accelerator (APEX 2800) for HP Gen 8 Server Blades
NOTE: This is a third party product marketed, sold and supported by the solution's vendor. For more
information, check vendor's website at: www.teradici.com/hardware-accelerator
NOTE: This solution must be purchased separately and is available from solution vendor's authorized
resellers. HP does not resell or factory integrate the solution
NOTE: This solution is supported by the vendor on servers:
HP ProLiant BL460c Gen8 Server Blade
HP ProLiant WS460c Gen8 Graphics Expansion Blade
NOTE: Teradici, PCoIP and PC-over-IP are trademarks of Teradici Corporation and may be registered in the
United States and/or other countries
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Technical Specifications
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 44
System Unit
Dimensions (H x W x
D)
(with bezel)
7.11 x 2.18 x 20.37 in (18.07 x 5.54 x 51.76 cm)
Weight
(approximate)
Maximum: all
processors, 16
DIMMs, hard drives,
mezzanine cards,
and two flash cache
batteries installed)
14.00 lb (6.33 kg)
Minimum: one
processor and 2
DIMMs installed
10.50 lb (4.75 kg)
Power
Specifications
For power specifications including input requirements, BTU rating, and power supply
output, please see the:
To review typical system power ratings use the HP Power Advisor which is available via
the online tool located at http://www.hp.com/go/hppoweradvisor.
NOTE: For optimal cooling and system performance the BL460c Gen8 Server Blade
requires the c7000 enclosure to be configured with 10 fans and the c3000 enclosure to
be configured with 6 fans.
System Inlet
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an altitude derating of
1.0°C per every 305 m (1.8°F per every 1,000 ft) above sea level to
a maximum of 3,050 m (10,000 ft), no direct sustained sunlight.
Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may
be limited by the type and number of options installed.
System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr
(36°F/hr).
Relative Humidity
(non-condensing)
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet
bulb temperature, non-condensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet
bulb temperature, non-condensing.
Altitude
Operating
3,050 m (10,000 ft). This value may be limited by the type and
number of options installed. Maximum allowable altitude change
rate is 457 m/min (1,500 ft/min).
Non-operating
9,144 m (30,000 ft). Maximum allowable altitude change rate is
457 m/min (1,500 ft/min).
Acoustic Noise
For acoustic noise specifications, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Technical Specifications
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex theoretical
bandwidth
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb or 10Gb HP
BladeSystem c-Class interconnect components. Both ports will operate at the same
speed.
NOTE: Each port on the 554FLB adapter transmits from the server at 20Gbps
(theoretical) full duplex.
IEEE Compliance
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x
Standard Features
ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and
Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Hardware-based accelerated iSCSI
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Technical Specifications
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office. Products
returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This information
(product disassembly instructions) is posted on the Hewlett Packard web site at:
http://www.hp.com/go/green. These instructions may be used by recyclers and other
WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Summary of Changes
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 47
Date
Version History
Action
Description of Change:
28-Sep-2015
From Version 46 to 47
Change
Standard Features section and links were updated in QuicSpec.
Added
Skus added:
P8B24A
700764-B21
P8B26AAE
700767-B21
P8B31A
700763-B21
17-Aug-2015
From version 45 to 46
Changed
What´s new and Standard Features sections were updated.
Added
Skus added in Additional Options and Core Options sections:
Service and Support, Configuration Information-Factory
Integrated Models and Core Options sections were updated
Added
HDD SSD 6G and 12G:
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Summary of Changes
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Factory Integrated models, Core Options, Additional Options
sections were updated
Added
Skus Added to Hard Drives:
759212-B21
759210-B21
759208-B21
Removed
Obsolete skus deleted:
690829-B21
690825-B21
653082-B21
03-Jul-2014
From Version 37 to 38
Added
FlexFabric Adapters were added:
700065-B21
700066-B21
700076-B21
10-Jun-2014
From Version 36 to 37
Changed
Standard Features, Configuration Information, Core Options,
Additional Options and Memory sections were revised.
Duplicated Registered DIMMs were deleted.
11-Apr-2014
From Version 35 to 36
Changed
Storage Controllers and Power Supplies were revised.
02-Apr-2014
From Version 34 to 35
Changed
Memory was revised.
31-Mar-2014
From Version 33 to 34
Changed
Processors and Memory were revised.
03-Mar-2014
From Version 32 to 33
Added
HP 24GB Three Rank x4 PC3L-10600R Registered CAS-9 Low
Voltage Memory Kit was added to Memory
18-Feb-2014
From Version 31 to 32
Added
Support for HP Secure Encryption, a data security option for
the HP Smart Array P731m and the P230i Controllers
13-Dec-2013
From Version 30 to 31
Added
HP OneView was added to Optional Features
Converged Infrastructure Management Software was added
HP 1.2TB 6G SAS 10k rpm SFF SC Dual Port Enterprise 3yr
Warranty Hard Drive was added to Hard Drives
Teradicil PCoIP Hardware Accelerator was added to Storage
01-Nov-2013
From Version 29 to 30
Changed
Updated the Notes in the Processor and Memory sections.
25-Oct-2013
From Version 28 to 29
Changed
Updated the Memory section.
09-Oct-2013
From Version 27 to 28
Changed
Update to the Standard Features section.
07-Oct-2013
From Version 26 to 27
Changed
Changes were made to the following Sections
Overview
Standard Features
Models
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Summary of Changes
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 49
Configuration
Memory
Core Options
23-Sep-2013
From Version 25 to 26
Changed
Changes were made to the Models, Configuration Information
and Core Options sections.
20-Sep-2013
From Version 24 to 25
Changed
Changes were made to the Notes in Memory sections.
12-Sep-2013
From Version 23 to 24
Changed
Changes were made in the North America and Canada versions.
10-Sep-2013
From Version 22 to 23
Added
E5-2600 v2 series Processors, Memory, Controllers, and NICs
were added
Canonical Ubuntu was added to Operating Systems and
Virtualization Software Support for ProLiant Servers
Converged Infrastructure Management Software was added to
Additional Options
Smart Array P731m/2G Controller was added to Storage
Controllers
27-Aug-2013
From Version 21 to 22
Changed
Changes were made in the North America and Canada versions.
13-May-2013
From Version 20 to 21
Changed
Changes Made to the following Sections
Additional Options- HP Storage Blades Section
HP USB and SD OptionsMemory- HP Memory Storage
25-Mar-2013
From Version 19 to 20
Removed
Optional Features: Removed HP iLO Advanced License for
ProLiant section.
Additional Options: Removed HP Storage Blades and HP
Expansion Blade section.
Added
Standard Features: Added NOTEs to the beginning of the
section.
Optional Features: Added Storage Software section.
Configuration Information - Factory Integrated Models: Added
Step 4 to section.
Additional Options: Added HP Integrated Lights-Out(iLO) to HP
iLO Advanced License section and HP Care Pack Services
section and Proactive Care Personalized Support
Environmental Option section.
Changed
Overview: Updated the What's New section
Standard Features: Updated Note in the Model section,
updated Maximum Internal Storage and Graphics section.
Optional Features: Updated HP Insight management software
section
Service and Support: Updated Standard Care and Parts and
Materials sections.
Updated complete Models section.
Configuration Information - Factory Integrated Models:
Updated Notes at beginning of Step 1, Updated notes in HP
Memory in Step 2 and Completely updated Step 3
Core Options: Updated Hp Hard Drives section
Additional Options: Updated HP Insight software, HP iLO
Advanced License, HP USB and SD Options section.
Memory: Updated Bl460c Gen8 Supported Memory Bandwidth
chart, Updated Hard Drives section.
27-Feb-2013
From Version 16 to 17
Changed/Added/R
emoved
Changes made to the following sections:
Optional Features: Added HP Proactive Insight experience
Core Options: Added new SKUs to the HP Networking section
Additional Options: Removed skus from the HP Insight
Software section.
04-Dec-2012
From Version 15 to 16
Changed
Changes made throughout the QuickSpec.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
HP ProLiant BL460c Gen8 Server Blade
Summary of Changes
c04123239 – DA – 14208 Worldwide — Version 47 — September 28, 2015
Page 50
24-Oct-2012
From Version 14 to 15
Changed
Changes made to Notes in the Memory sections.
18-Oct-2012
From Version 13 to 14
Changed
Formatting correction was made in the Memory and Storage
sections.
28-Sep-2012
From Version 12 to 13
Changed
Changes were made in Standard Features and Additional
Options sections.
25-Sep-2012
From Version 11 to 12
Changed
Changes were made in the North America and Canada versions.
24-Sep-2012
From Version 10 to 11
Changed
Changes were made in Standard Features, Optional Features
and Technical Specifications sections.
14-Sep-2012
From Version 9 to 10
Changed
Changes made in Configuration Information section only.
13-Aug-2012
From Version 8 to 9
Changed
Changes made in Configuration Information, Core Options,
Additional Options, Memory and Storage sections.
06-Jul-2012
From Version 7 to 8
Changed
Change made in the Standard Features section.
15-Jun-2012
From Version 6 to 7
Removed
Removed items in Configuration Information and Core Options.
04-Jun-2012
From Version 5 to 6
Changed
Changes made throughout the QuickSpec.
26-Mar-2012
From Version 3 to 5
Changed
Changes made throughout the QuickSpec.
15-Mar-2012
From Version 1 to 3
Changed
Changes made in the Standard Features, Models and Step 1 of
the Configuration Information section.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.