QuickSpecs
HPE Flexible Slot Power Supplies
Overview
Page 1
HPE Flexible Slot Power Supplies
HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less
installation into
power
power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.
Flex Slot power supplies are rated for
efficiency of up to 96
Gen9 ProLiant Servers
server to communicate identificat
can then be shared with HPE Insight Control to manage power usage and efficiency in the data center.
HPE Flexible Slot Power Supplies
1.
Power Supply Handle
4.
Release Lever
2.
Identification Label
5.
C-14 Input Connector
3.
Power Supply LED Status Indicator
6.
Power Discovery Services Communication
Platinum Plus model only)
HPE server solutions. HPE's Flex Slot power supplies are certified for high-efficiency operation and offer multiple
output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce
Platinum-level certification with efficiency of up to 94%, and Titanium-level certification with
%. Support for HPE Power Discovery Services, via embedded power line communication technology on the
, is also available with the 800W Titanium and 1400W Platinum Plus model. This feature enables each
ion, location, and power-related data to the Intelligent Power Distribution Unit in the rack which
Port (Gen9 800W Titanium Plus and Gen9 1400W
QuickSpecs
HPE Flexible Slot Power Supplies
Overview
Page 2
HPE Recommended
Options
HPE recommended options have best performance, value and availability.
Recommended
Offering the best combination of performance, value and availability, Recommended Options have been
selected by HPE experts to provide the right technology for a
segments.
Options provide the best fit with timely availability.
Extended
Extended Options provide an extended catalog of products tailored for customers in specific markets or
with specific workloads, requiring the utmost in performance or value.
ProLiant management and security experience, Extended Options represent great value and
performance but typically have a longer lead-time.
HPE Recommended Options – View the list for your region
Models
Recommended
HPE Power Supplies
Gen9 Flexible Slot Power Supplies
NOTE: Mixing different power supplies in the same server may limit or disable some power supply
features including support for power redundancy. To ensure access to all available features, all
power supplies within the same server should have the same outp
NOTE: Low Halogen Power Supplies are not compatible with HPE Gen9 Servers.
HPE Flexible Slot Platinum Power Supply Kits
NOTE:
standard C
HPE 500W Flex Slot Platinum Hot Plug Power Supply Kit
720478-B21
HPE 800W Flex Slot Platinum Hot Plug Power Supply Kit
720479-B21
HPE Flexible Slot Platinum Plus Power Supply Kits
NOTE:
C
NOTE:
240V AC).
HPE 1400W Flex Slot Platinum Plus Hot Plug Power Supply Kit
720620-B21
HPE Flexible Slot -48VDC Power Supply Kits
NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.
HPE 800W Flex Slot -48VDC Hot Plug Power Supply Kit
720480-B21
Gen10 Flexible Slot Power Supplies
NOTE: Mixing different power supplies in the same server may limit or disable some power supply
features including support for power redundancy. To ensure access to all
power supplies within the same server should have the same output and efficiency ratings.
NOTE: Low Halogen Power Supplies are not compatible with HPE Gen9 Servers.
HPE Flexible Slot Platinum Power Supply Kits
NOTE:
standard C
NOTE:
AC).
NOTE: 1800W-2200W Flex Slot Platinum power supplies is only supported on Apollo 2000 Gen10
HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865408-B21
HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
865414-B21
HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit
830272-B21
HPE 1800W-2200W Flex Slot Platinum Hot Plug Power Supply Kit
876935-B21
range of workloads and market
Fully integrated into the ProLiant management and security experience, Recommended
Fully integrated into the
ut and efficiency ratings.
Flex Slot Platinum power supplies support power efficiency of up to 94% and include a
-14 power inlet connector.
Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a
-14 power inlet connector that can support HPE Power Discovery Services (blue connector).
1400W Flex Slot Platinum Plus power supplies must be used with high-line input (200V –
available features, all
Flex Slot Platinum power supplies support power efficiency of up to 94% and include a
-14 power inlet connector.
1600W Flex Slot Platinum power supplies must be used with high-line input (200V – 240V
QuickSpecs
HPE Flexible Slot Power Supplies
Overview
Page 3
HPE Flexible Slot Titanium Power Supply Kits
NOTE:
standard C
NOTE:
240V AC).
HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit
865438-B21
HPE Flexible Slot -48VDC Power Supply Kits
NOTE:
HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit
865434-B21
Extended
HPE Power Supplies
Gen9 Flexible Slot Power Supplies
HPE Flexible Slot Titanium Plus Power Supply Kits
NOTE:
96% and include a C
Discovery Services (blue connector).
NOTE:
input (200V – 240V AC).
HPE 800W Flex Slot Titanium Hot Plug Power Supply Kit
720482-B21
Gen10 Flexible Slot Power Supplies
HPE Flexible Slot HVAC/HVDC Power Supply Kits
NOTE:
and support both 277VAC/380VDC power inputs.
HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit
865428-B21
HPE Scalable Persistent Memory Power Supply and Battery Backup
NOTE:
Memory solution
HPE Scalable Persistent Memory 800W Flex Slot PSU and 400W BBU 2-pack FIO Kit
827608-B21
Flex Slot Titanium power supplies support power efficiency of up to 96% and include a
-14 power inlet connector.
800W Flex Slot Titanium Plus power supplies must be used with high-line input (200V –
Flex Slot -48VDC power supplies support power efficiency of up to 94%.
Flex Slot Titanium Plus power supplies support power efficiency of up to
-14 power inlet connector that can support HPE Power
800W Flex Slot Titanium Plus power supplies must be used with high-line
Flex Slot universal power supplies support power efficiency of up to 94%
Contains 2 units in each SKU. Must be used with HPE Scalable Persistent
QuickSpecs
HPE Flexible Slot Power Supplies
Standard Features
Page 4
Features/Benefits
Titanium-Certified Power Efficiency
Flex Slot
Multiple Power Output
Power Management
’s Power Discovery Services which communicates with the intelligent
80Plus Certification
The 80PLUS test protocol was developed jointly by Ecova Plug Load Solutions and the Electric Power
Research Institute (EPRI) in 2003, with the program being formally launched in 2004.
The 80 PLUS performance
efficient at 20%, 50% and 100% of rated load with a true power factor of 0.9 or greater. This makes an 80
PLUS certified power supply substantially more efficient than typical power supplies found in many other
electrical devices.
Who benefits from the 80PLUS power supply program?
empowered with information regarding energy efficient IT
What are the efficiency requirements for each
80 PLUS Certification
230V Internal
% of Rated Load
20%
50%
100%
80 PLUS Bronze
81%
85%
81%
• Titanium (96%) power efficiency certification from 80Plus program – one of the highest power
efficiency certifications available in the IT industry
• Reduces data center operating costs related to power by reducing server power requirements
and power waste
Design
• Tool-less hot plug design improves serviceability buy allowing quick and easy access to system
power supplies
• Common form factor across all ProLiant Gen9 and Gen10servers allows multiple server
platforms to share power supply spares, reducing cost and space requirements for spares
Options
• Multiple output options allowing users to "right-size" their power needs and avoid "trapped"
power capacity in their data centers caused by over-subscribing power needs
• Support for both low-line and high-line AC input voltages providing additional flexibility to
operate in multiple It environments (500W and 800W Platinum only). -48VDC, 277VAC and
380VDC input voltages are also available.
• Supports multiple operating modes to maximize power efficiency when configuring servers with
redundant power supplies
• Integrated support for HPE
PDU to monitor and manage power usage (Gen9 800W Titanium and Gen9 1400W Platinum
Plus only)
specification requires power supplies in servers to be 80% or greater energy
• Commercial/Residential Consumers -
options that help them cut energy costs and reduce their environmental impact
• Utility/Power Providers - participation in a program that focuses on reducing power demands
on overburdened grids as well as reducing power waste and its associated environmental
impact
certification level?
QuickSpecs
HPE Flexible Slot Power Supplies
Standard Features
Page 5
80 PLUS Silver
85%
89%
85%
80 PLUS Gold
88%
92%
88%
80 PLUS Platinum
90%
94%
91%
80 PLUS Titanium
94%
96%
91%
What level of certification do
HPE
certification.
Titanium certification.
please refer to the 80Plus website at: https://www.plugloadsolutions.com/.
Support for Redundant
Power Supplies
An HPE ProLiant server solutions configured with 2 Flex Slot Power Supplies – 500W, 800W, 1400W,
1600W
A single
efficiency when operating in the middle range (50%) of its capacity.
For redundant
adding redundant power supplies), the load is shared e
general, the load-balanced mode offers better efficiency for loads requiring more than 60 percent of the
primary power supply capacity.
When high
under System options -> Redundancy options), each power supply in the server is designated as either a
primary or secondary supply, and the entire server load is shifted to the primary power supply. This
allows the primary power supply to operate at high
secondary power supply operates in idle mode, providing no output power and consuming very little
energy (typically two to four watts per supply). The user can also specify that odd or even power
supplies wi
to balance the load across a rack manually or automatically.
Compatibility
HPE Gen9 Flex Slot power supplies are compatible with all HPE ProLiant Gen9 Performance servers
including the:
HPE
including the:
• HPE ProLiant DL560 Gen10
HPE Flexible Slot Power Supplies meet?
's Platinum and Platinum Plus power supply options meet 80PLUS requirements for Platinum
HPE’s Titanium and Titanium Plus power supply options meet 80PLUS requirements for
To review 80Plus certification reports for each HPE Flexible Slot Power Supply,
, or 1800W-2200W - supports the following three power scenarios:
• Operation with a single power supply
• Operation with redundant power supplies in load-balanced mode
• Operation with redundant power supplies in high-efficiency mode
Flex Slot Power Supply supporting the entire load of the server can achieve the highest
Flex Slot Power Supplies operating in load-balanced mode (the default mode when
qually between the two power supplies. In
-efficiency mode is enabled for redundant supplies (via the server's ROM-based setup utility
er efficiency points on the load curve while the
ll be designated manually or automatically as secondary supplies. This flexibility allows users
• HPE ProLiant DL360 Gen9
• HPE ProLiant DL380 Gen9
• HPE ProLiant ML350 Gen9
• HPE Apollo 2000 Gen9
• HPE Apollo 4200 Gen9
• HPE Apollo 4500 Gen9
Gen10 Flex Slot Low Halogen power supplies are compatible with most HPE ProLiant servers
• HPE ProLiant DL360 Gen10
• HPE ProLiant DL380 Gen10
• HPE ProLiant DL385 Gen10
QuickSpecs
HPE Flexible Slot Power Supplies
Standard Features
Page 6
•
HPE Scalable Persistent Memory Flex Slot power supply and battery backup is compatible with HPE
ProLiant DL380 Gen10
To check for power supply compatibility, please review the appropriate
at http://www.hpe.com/info/qs
HPE ProLiant DL580 Gen10
• HPE ProLiant ML110 Gen10
• HPE ProLiant ML350 Gen10
• HPE Apollo 2000 Gen10
• HPE Apollo 4500 Gen10
HPE Server QuickSpecs
.
QuickSpecs
HPE Flexible Slot Power Supplies
Service and Support
Page 7
Service and Support
NOTE: HPE Flexible Slot Power supplies are supported as a part of the HPE Server Infrastructure.
No separate
HPE
HPE
stability. Connect to
to help prevent problems and solve issues faster. Our support technology lets
you to tap into the knowledge of millions of devices and
control, anywhere, any time.
Protect your business beyond warranty with
HPE Pointnext operational services
response time as you purchase your new server, giving you full entitlement for the term you select.
Get connected to HPE to
improve your support
experience
Connecting products to Hewlett Packard Enterprise will help prevent problems with 24x7monitoring,
prefailure alerts, automatic call logging, and parts dispatch. With Connected products, you can have a
dashboard to manage your IT anywhere, anytime, from any device.
HPE Support Center
Personalized online support portal with access to information, tools and experts to support Hewlett
Packard Enterprise business products
support resources or collaborate with peers. Learn more
The HPE Support
agent for live support. Now, you can get access to personalized IT support anywhere
HPE
warranty,
*The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability.
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth in the manufacturer's operating manual, product quick
technical pro
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified
for the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and
for the same coverage period as the server unless the maximum supported lifetime and/or the
maximum usage limitation has been exceeded. Coverage of the UPS battery is not include
warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by
that
exceeded maximum supported lifetime and/or the maximum usage limit as set forth in the
manufacturer's operating manual or the technical data sheet are not elig
retention service feature option.
care packs are needed to be purchased.
Technology Services for Industry Standard Servers
Technology Services delivers confidence, reduces risk and helps customers realize agility and
HPE
thousands of experts to stay informed and in
HPE Pointnext operational services
enable you to order the right service level, length of coverage and
. Submit support cases online, chat with HPE experts, access
https://support.hpe.com/hpesc
Center Mobile App* allows you to resolve issues yourself or quickly connect to an
, anytime.
Insight Remote Support and HPE Support Center are available at no additional cost with a HPE
HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
duct data sheet will not be provided, repaired, or replaced as part of these services.
tower UPS products; these items will be covered at the same service level and
have not failed. SSD/Flash Drives that are specified by HPE as consumable parts and/or that have
HPE due to malfunction. It does not apply to any exchange of Disk or SSD/Flash Drives
-specs, or the
d; standard
ible for the defective media
QuickSpecs
HPE Flexible Slot Power Supplies
Service and Support
Page 8
For more information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or
visit: http://www.hpe.com/services
Hewlett Packard Enterprise Authorized Channel Partner. Or
QuickSpecs
HPE Flexible Slot Power Supplies
Related Options
Page 9
Related Options
Locking IEC Jumper
Cables
HPE C13/C14 WW 10A 0.7m Blk Lckng PC
Q0P67A
HPE C13/C14 WW 10A 1.4m Blk Lckng PC
Q0P68A
HPE C13/C14 WW 10A 2m Blk Lckng PC
Q0P69A
HPE C13/C14 WW 10A 3m Blk Lckng PC
Q0P70A
HPE C19/C20 WW 16A 1.2m Blk Lckng PC
Q0P71A
HPE C19/C20 WW 16A 2m Blk Lckng PC
Q0P72A
HPE C19/C20 WW 16A 2.5m Blk Lckng PC
Q0P73A
HPE C13/C14 WW 10A 0.7m 6pc Lckng PC
Q0Q02A
HPE C13/C14 WW 10A 1.4m Blk 6pc Lckng PC
Q0Q03A
HPE C13/C14 WW 10A 2m Blk 6pc Lckng PC
Q0Q04A
HPE C13/C14 WW 10A 3m Blk 6pc Lckng PC
Q0Q05A
NOTE: Standard power cables and jumpers do not support Power Line
Communications or Power Discovery Services.
IEC Jumper Cables
HPE C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
A0K03A
HPE C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
A0K04A
HPE C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord
AF573A
HPE OEM C13 - C14 WW 250V 10A Gray 3m Jumper Cord
A0K06A
HPE C13 - C14 WW 250V 10Amp 0.7m Jumper Cord
142257-B28
HPE C13 - C14 WW 250V 10Amp 1.4m Jumper Cord
142257-006
HPE C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
A0K02A
HPE C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
142257-002
HPE C13 - C14 WW 250V 10Amp 3.0m Jumper Cord
142257-003
HPE C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
AF572A
HPE C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
HPE C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
HPE C13-NEMA 6-15P 10A/250V 3.6m Black Power Cord
A0N33A
HPE C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
HPE C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
HPE C13 - IS-1293 IN 250V 10Amp HV 2.5m Power Cord
SG579A
HPE C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
HPE C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
HPE C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF591A
HPE C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
HPE C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
AF568A
HPE C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF564A
HPE C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
AF571A
HPE C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
HPE C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
AF567A
HPE C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
HPE C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
HPE C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
AF570A
NOTE: Standard power cables and jumpers do not support Power Line
Communications or Power Discovery Services.
QuickSpecs
HPE Flexible Slot Power Supplies
Related Options
Page 10
Localized Power Cords
HPE C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
AF572A
HPE C13 - AS3112-3 AU 250V 10Amp 2.5m Power Cord
AF569A
HPE C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
AF556A
HPE C13-NEMA 6-15P 10A/250V 3.6m Black Power Cord
A0N33A
HPE C13 - GB-1002 CN 250V 10Amp 1.83m Power Cord
AF557A
HPE C13 - IS-1293 IN 240V 6Amp LV 2.0m Power Cord
AF562A
HPE C13 - IS-1293 IN 250V 10Amp HV 2.5m Power Cord
SG579A
HPE C13 - CNS-690 TW 110V 13Amp 1.83m Power Cord
AF561A
HPE C13 - IRAM -2073 AR 250V 10A 2.5m Power Cord
AF558A
HPE C13 - NBR-14136 BR 250V 10Amp 1.83m Power Cord
AF591A
HPE C13 - DK-2.5A DK 250V 10Amp 1.83m Power Cord
AF566A
HPE C13 - CEE-VII EU 250V 10Amp 1.83m Power Cord
AF568A
HPE C13 - SI-32 IL 250V 10Amp 1.83m Power Cord
AF564A
HPE C13 - CEI-23-50 IT/CL 250V 10Amp 1.83m Power Cord
AF571A
HPE C13 - KSC- 8305 KR 250V 10Amp 1.83m Power Cord
AF560A
HPE C13 - SABS-164 ZA 250V 10Amp 2.5m Power Cord
AF567A
HPE C13 - SEV 1011 CH 250V 10Amp 1.83m Power Cord
AF565A
HPE C13 - Nema 5-15P TH/PH 250V 10Amp 1.83m Power Cord
AF559A
HPE C13 - BS-1363A UK/HK/SG 250V 10Amp 1.83m Power Cord
AF570A
NOTE: Standard power cables and jumpers do not support Power Line
Communications or Power Discovery Services.
-48VDC Power Cables
HPE No Plug 12AWG 48V DC 3.0m Power Cord
J6X43A
NOTE: This cable is only used with Gen9 -48VDC Flex Slot Power Supplies.
HPE 48VDC 2.85m Power Cable
Q0H80A
NOTE: Q0H80A is only used with Gen10 -48VDC Flex Slot Power Supplies.
277VAC / 380VDC
Power Cables
HPE SAFDGRID-LS-25 277V 15Amp AC 0.76m Jumper Cord
J6X01A
HPE SAFDGRID-LS-25 277V 15Amp AC 1.37m Jumper Cord
J6X02A
HPE SAFDGRID-LS-25 277V 15Amp AC 2.0m Jumper Cord
J6X03A
HPE SAFDGRID-SAFDGRID 277V 15Amp DC 0.76m Jumper Cord
J6W98A
HPE SAFDGRID-SAFDGRID 277V 15Amp DC 1.37m Jumper Cord
J6W99A
HPE SAFDGRID-SAFDGRID 277V 15Amp DC 2.0m Jumper Cord
J6X00A
NOTE: These cables are only used with 277VAC / 380VDC Flex Slot Power Supplies.
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 11
HPE 500W Flex Slot Platinum Hot Plug Power
Supply Kit
HPE's Generic Part Number
723594-001
HPE's Spares Part Number
754377-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
100 120 127 200 208 220 230 240
Maximum Rated Output Wattage Rating (Watts)
500
500
500
500
500
500
500
500
Nominal Input Current ( A rms )
5.6
4.6
4.3
2.7
2.6
2.5
2.4
2.3
Maximum Rated Input Wattage Rating ( Watts )
558
550
543
539
538
538
537
537
Maximum Rated VA (Volt-Amp)
564 556 549 544 544 543 542 542
Efficiency ( % )
89.6
90.9
92.1
92.8
92.9
93.0
93.1
93.1
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.32
0.38
0.40
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak ) 30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
1904
1877
1853
1839
1837
1834
1832
1832
HPE 800W Flex Slot Titanium Hot Plug Power
Supply (720482
HPE's Generic Part Number
734868-001
HPE's Spares Part Number
754378-001
Input Voltage Range ( V rms )
200-240
Frequency Range (Nominal) ( Hz ) 50-60
Nominal Input Voltage ( V rms )
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
800
800
800
800
800
Nominal Input Current ( A rms )
9.1
7.5
7.0
4.4
4.2
Maximum Rated Input Wattage Rating ( Watts )
906 891 878 871 870
Maximum Rated VA (Volt-Amp)
915
900
887
880
879
Efficiency ( % )
88.3
89.8
91.1
91.9
92.0
Power Factor
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.32
0.38
0.40
0.63
0.65
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2910
2907
2904
2901
2899
HPE 800W Flex -48VDC Hot Plug Power
Supply (720480
HPE's Generic Part Number
735040-001
HPE's Spares Part Number
754382-001
Input Voltage Range ( V DC ) -40 to -72
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( V DC )
-40
-48
-72
Maximum Rated Output Wattage Rating (Watts)
800 800 800
Nominal Input Current ( A DC )
22.0
18.1
11.9
Maximum Rated Input Wattage Rating ( Watts )
882
871
858
Maximum Rated VA (Volt-Amp)
882
871
858
Efficiency ( % ) 90.7 91.9 93.2
Power Factor
1.0
(720478-B21)
-B21)
-B21)
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 12
Leakage Current ( mA )
0.0
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
3008
2971
2929
HPE 800W Flex Slot Platinum Hot Plug Power
Supply (720479
HPE's Generic Part Number
723599-001
HPE's Spares Part Number
754381-001
Input Voltage Range ( V rms ) 100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
800
800
800
800
800
800
800
800
Nominal Input Current ( A rms )
9.1 7.5 7.0 4.4 4.2 4.0 3.8 3.7
Maximum Rated Input Wattage Rating ( Watts )
906
891
878
871
870
869
868
868
Maximum Rated VA (Volt-Amp)
915
900
887
880
879
877
876
877
Efficiency ( % )
88.3
89.8
91.1
91.9
92.0
92.1
92.2
92.1
Power Factor
0.99 0.99 0.99 0.99 0.99 0.99 0.99 0.99
Leakage Current ( mA )
0.32
0.38
0.40
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms ) 10
Maximum British Thermal Unit Rating ( BTU-Hr )
3090
3040
2997
2972
2968
2963
2960
2963
HPE 1400W Flex Slot Platinum Plus Hot Plug
Power Supply Kit (720620
HPE's Generic Part Number
733427-001
HPE's Spares Part Number
754383-001
Input Voltage Range ( V rms )
200-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
1400
1400
1400
1400
1400
Nominal Input Current ( A rms )
7.9
7.6
7.2
6.8
6.5
Maximum Rated Input Wattage Rating ( Watts )
1567
1564
1560
1557
1554
Maximum Rated VA (Volt-Amp)
1583
1580
1575
1572
1570
Efficiency ( % )
89.4
89.5
89.8
89.9
90.1
Power Factor
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
5346
5336
5322
5311
5302
-B21)
-B21)
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 13
HPE 500W Flex Slot Platinum Hot Plug Low
Halogen Power Supply Kit
HPE's Generic Part Number
865398-001
HPE's Spares Part Number
866729-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
500
500
500
500
500
500
500
500
Nominal Input Current ( A rms )
5.6
4.6
4.4
2.7
2.6
2.5
2.4
2.3
Maximum Rated Input Wattage Rating ( Watts )
557
550
549
539
539
538
537
537
Maximum Rated VA (Volt-Amp)
563
556
554
545
544
543
543
542
Efficiency ( % )
89.7
90.8
91.1
92.7
92.8
93.0
93.1
93.1
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.33
0.39
0.41
0.65
0.68
0.72
0.75
0.78
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
1902
1878
1873
1840
1838
1835
1833
1832
HPE 800W Flex Slot Platinum Hot Plug Low
Halogen Power Supply Kit (865414
HPE's Generic Part Number
865409-001
HPE's Spares Part Number
866730-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
800
800
800
800
800
800
800
800
Nominal Input Current ( A rms )
9.1
7.5
7.0
4.4
4.2
4.0
3.8
3.6
Maximum Rated Input Wattage Rating ( Watts )
899
887
883
867
866
865
864
864
Maximum Rated VA (Volt-Amp)
908
896
892
876
875
874
873
873
Efficiency ( % )
89.0
90.2
90.6
92.3
92.4
92.5
92.6
92.6
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.33
0.39
0.41
0.65
0.68
0.72
0.75
0.78
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
3067
3025
3012
2958
2956
2951
2948
2949
HPE 1600W Flex Slot Platinum Hot Plug Low
Halogen Power Supply Kit (830272
HPE's Generic Part Number
830262-001
HPE's Spares Part Number
863373-001
Input Voltage Range ( V rms )
200-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
1600
1600
1600
1600
1600
Nominal Input Current ( A rms )
8.7
8.3
7.9
7.5
7.2
Maximum Rated Input Wattage Rating ( Watts )
1734
1732
1726
1727
1725
Maximum Rated VA (Volt-Amp)
1736
1734
1729
1729
1728
Efficiency ( % )
92.2
92.4
92.7
92.7
92.8
Power Factor
1.00
1.00
1.00
1.00
1.00
(865408-B21)
-B21)
-B21)
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 14
Leakage Current ( mA )
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
5918
5911
5888
5891
5884
HPE 800W Flex Slot -48VDC Hot Plug Low
Halogen Power Supply Kit (865434
HPE's Generic Part Number
865431-001
HPE's Spares Part Number
866728-001
Input Voltage Range ( V DC )
-40Vdc to -72Vdc
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( V DC )
40
48
72
Maximum Rated Output Wattage Rating (Watts)
800
800
800
Nominal Input Current ( A DC )
22.1
18.2
12.0
Maximum Rated Input Wattage Rating ( Watts )
874
865
854
Maximum Rated VA (Volt-Amp)
883
873
862
Efficiency ( % )
91.5
92.5
93.7
Power Factor
1.0
Leakage Current ( mA )
0.13
0.16
0.23
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2983
2951
2912
HPE 800W Flex Slot Titanium Hot Plug Low
Halogen Power Supply Kit (865438
HPE's Generic Part Number
865435-001
HPE's Spares Part Number
866793-001
Input Voltage Range ( V rms )
200-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
800
800
800
800
800
Nominal Input Current ( A rms )
4.3
4.1
3.9
3.7
3.6
Maximum Rated Input Wattage Rating ( Watts )
851
851
850
848
848
Maximum Rated VA (Volt-Amp)
860
859
858
857
857
Efficiency ( % )
94.0
94.0
94.2
94.3
94.3
Power Factor
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.65
0.68
0.72
0.75
0.78
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2905
2903
2899
2895
2893
HPE 800W Flex Slot Universal Hot Plug Low
Halogen Power Supply Kit (865428
277VAC
HPE's Generic Part Number
865425-001
HPE's Spares Part Number
866727-001
Input Voltage Range ( V rms )
200-277
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
200
208
230
240
277
Maximum Rated Output Wattage Rating (Watts)
800
800
800
800
800
Nominal Input Current ( A rms )
4.4
4.2
3.8
3.6
3.1
-B21)
-B21)
-B21)
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 15
Maximum Rated Input Wattage Rating ( Watts )
869
868
865
864
861
Maximum Rated VA (Volt-Amp)
877
876
874
872
869
Efficiency ( % )
92.1
92.2
92.5
92.6
93.0
Power Factor
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.65
0.68
0.75
0.78
0.90
Maximum Inrush Current (A peak )
8
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2964
2960
2951
2947
2936
HPE 800W Flex Slot Universal Hot Plug Low
Halogen Power Supply Kit (865428
HPE's Generic Part Number
865425-001
HPE's Spares Part Number
866727-001
Input Voltage Range ( V rms )
380
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( V rms )
380
Maximum Rated Output Wattage Rating (Watts)
800
Nominal Input Current ( A rms )
2.3
Maximum Rated Input Wattage Rating ( Watts )
863
Maximum Rated VA (Volt-Amp)
863
Efficiency ( % )
92.8
Power Factor
1.00
Leakage Current ( mA )
0.0
Maximum Inrush Current (A peak )
8
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2943
HPE Scalable Persistent Memory 800W Flex
Slot PSU and 400W BBU 2
(827608-B21)
HPE's Generic Part Number
827497-001
HPE's Spares Part Number
866430-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
500
500
500
800
800
800
800
800
Nominal Input Current ( A rms )
5.6
4.6
4.7
4.4
4.2
3.9
3.8
3.6
Maximum Rated Input Wattage Rating ( Watts )
551
544
586
861
860
859
857
855
Maximum Rated VA (Volt-Amp)
557
549
592
870
869
867
866
864
Efficiency ( % )
90.7
91.9
85.4
92.9
93.0
93.2
93.3
93.5
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.33
0.39
0.41
0.65
0.68
0.72
0.75
0.78
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
1881
1856
1999
2939
2935
2929
2925
2918
-B21) HVDC
-pack FIO Kit
QuickSpecs
HPE Flexible Slot Power Supplies
Power Specifications
Page 16
HPE 1800W-2200W Flex Slot Platinum Hot
Plug
HPE's Generic Part Number
876932-001
HPE's Spares Part Number
882135-001
Input Voltage Range ( V rms )
200-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( V rms )
200
208
220
230
240
Maximum Rated Output Wattage Rating (Watts)
1800
1900
2000
2100
2200
Nominal Input Current ( A rms )
9.75
9.91
9.88
9.94
9.99
Maximum Rated Input Wattage Rating ( Watts )
1931
2041
2153
2262
2373
Maximum Rated VA (Volt-Amp)
1951
2062
2175
2285
2397
Efficiency ( % )
93.20
93.09
92.90
92.83
92.72
Power Factor
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
6590
6964
7345
7719
8096
Power Supply Kit (876935-B21)
QuickSpecs
HPE Flexible Slot Power Supplies
Technical Specifications
Page 17
All AC Power Supplies:
Operating Temperature
41° to 131°F (5° to 55°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
The maximum ambient temperature of the power supply shall have an altitude de-rating, from
sea level, of 1.0°C per every 304.8 m
of 3048 m (10,000 ft).
Storage Temperature
-40° to 185°F (-40 to 85°C)
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line - Rated: 100V - 127V; Min 90V to Max 132V
High Line
(model 720620
High Line AC input only)
High Line
240VDC Support
720479
830272-B21, and 876935-B21 only)
Input Frequency
Rated: 50 - 60Hz; Min 47Hz to Max 63Hz
FCC EMI Certification
CE Mark, UL, cUL, IEC, EN, KCC, BSMI, CCC, TUV, C-tick, CISPR Class A
Mechanical Dimensions
(WxHxD)
2.68 x 1.59 x 8.87 in (6.80 x 4.04 x 22.53 cm)
NOTE: Length includes from handle to card-edge.
Unit Weight
2.0 lbs.
3.0 lbs.
Shipping Dimensions
(WxHxD)
14.75 x 7.5 x 5.75 in (37.47 x 19.05 x 14.61 cm)
Shipping Weight
3.5 lb (1.59 kg)
4.5 lb (2.04 kg) (model 720620-B21 only)
Kit Contents
Model 720478-B21, 720479-B21, 720620-B21 720482-B21, 865408-B21
865414-B21, 830272-B21, and 865438-B21 ship with:
(1) Power supply unit, (1) IEC C13-C14 jumper cable, installation/safety guide
Model 720484-B21, 865428-B21 ship with:
(1) Power supply unit, installation/safety guide
Power Supply Hold-Up time in the
event of AC loss
Condition: 100% rated output
power
Minimum)
Non-Redundant (1+0) – 10ms
Redundant (1+1) – 20ms
Condition: 50% rated output
power
Minimum)
Non-Redundant (1+0) – 20ms
Redundant (1+1) – 30ms
All DC Power Supplies:
Operating Temperature
41° to 131°F (5° to 55°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
0 to 5,000ft (1,524m) with no derating;
The maximum ambient
sea level, of 1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea level to a maximum
of 3048 m (10,000 ft).
Storage Temperature
-40° to 185°F (-40 to 85°C)
(1.8°F per every 1000 ft) above sea level to a maximum
- Rated: 200 - 240V; Min 180V to Max 264V
-B21, 720482-B21, 830272-B21, 865438-B21, and 876935-B21 supports
- Rated: 200 - 277VAC; Min 180VAC to Max 305VAC (model 720484-B21 only)
- Rated 240VDC; Min 180VDC to Max 320VDC (model 720478-B21,
-B21, 720482-B21, 720620-B21, 865408-B21, 865414-B21, 865438-B21,
(Time in Milliseconds –
(Time in Milliseconds –
(0.91 kg)
(1.36 kg) (model 720620-B21 only)
temperature of the power supply shall have an altitude derating from
QuickSpecs
HPE Flexible Slot Power Supplies
Technical Specifications
Page 18
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft msl
Input Voltage
48VDC to 54VDC (nominal); Min 40VDC to Max 72VDC (model 720480-B21 only)
380VDC(nominal); Min 240VDC to Max 420VDC (model 720484-B21 only)
Input Frequency
DC input
Conformance Standards
CE Mark, UL, CSA, IEC, EN, CNS, KC, CCC, C-tick, TUV, CISPR Class A
Mechanical Dimensions (WxHxD)
1.58 x 2.67 x 7.20 in (4.03 x 6.80 x 18.29 cm)
Unit Weight
2.5 lb (1.13 kg)
Shipping Dimensions (WxHxD)
14.87 x 7.25 x 5.63 in (37.77 x 18.42 x 14.30 cm)
Shipping Weight
3.5 lb (1.59 kg) (for model 720480-B21, 720484-B21)
Kit Contents
Models 720480-B21,720484-B21, and 865428-B21 ship with:
(1) Power supply unit, installation/safety guide
QuickSpecs
HPE Flexible Slot Power Supplies
Technical Specifications
Page 19
800W Power Supply with 400 W
BBU
Operating Temperature
50° to 98°F (10° to 37°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
The maximum ambient temperature of the power supply shall have an altitude de-rating of
2.0°C per every 304.8 m (1000 ft)
above sea level
Non
Storage Temperature
-22° to 104°F (-30 to 40°C) for 3 months
-22° to 77°F (-30 to 25°C) for 18 months
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line - Rated: 100V - 127V; Min 90V to Max 132V
500W Maximum Output Power
High Line
800W Maximum Output Power
Input Frequency
Rated: 50 - 60Hz; Min 47Hz to Max 63Hz
FCC EMI Certification
CE Mark, UL, cUL, IEC, EN, KCC, BSMI, CCC, TUV, C-tick, CISPR Class A
Mechanical Dimensions
(WxHxD)
2.68 x 1.59 x 8.87 in (6.80 x 4.04 x 22.53 cm)
NOTE:
Unit Weight
2.2 lbs. (1 kg)
Shipping Dimensions
(WxHxD)
14.75 x 7.5 x 5.75 in (37.47 x 19.05 x 14.61 cm)
Kit Contents
Models 827608-B21 ship with:
(1) Power supply unit, installation/safety guide
The battery product may require replacement after 3 years operation in order to assure that
the battery product retains the required capacity to fulfill the run time requirements of the end
use system. The End use system will additionally provide Warning alert IML messaging to
inform users of the need to replace the battery product when the remaining battery capacity is
determined to be low.
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in,
and recycling programs, in many geographic areas, for our products.
Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.
http://www.hpe.com
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by
treatment facilities. This information (product disassembly instructions)
is posted on the Hewlett Packard Enterprise web site. These instructions
may be used by recyclers and other WEEE treatment facilities as well as
Hewlett Packard Enterprise OEM customers who integrate and re
Hewlett Packard Enterprise equipment.
http://www.hpe.com/recycle
starting from 1524m (5,000 ft.) up to 3048m (10,000 ft.)
-Operating: 15240m (50,000 ft.) above sea level
- Rated: 200 - 240V; Min 180V to Max 264V
Length includes from handle to card-edge.
/recycle
-sell
QuickSpecs
HPE Flexible Slot Power Supplies
Summary of Changes
Page 20
Date
Version History
Action
Description of Change
02-Jul-2018
From Version 7 to 8
Changed
Standard Features, Related Options, and Technical
Specifications were revised.
04-Jun-2018
From Version 6 to 7
Added
New 1800W-2200W Flex Slot Power Supply was added
to the QuickSpecs.
Changed
Overview, Standard Features, and Power Specifications
were revised.
04-Dec-2017
From Version 5 to 6
Changed
Overview and Standard Features were revised.
25-Sep-2017
From Version 4 to 5
Added
New HPE Scalable Persistent Memory 800W Flex Slot
QuickSpecs.
Changed
Overview, Standard Features, Power Specifications, and
Technical Specifications were revised.
11-Jul-2017
From Version 3 to 4
Changed
Overview, Standard Features, Related Options, Power
Specifications, and Technical Specifications were revised.
08-Jan-2016
From Version 2 to 3
Changed
Overview and Related Options sections were revised.
30-Mar-2015
From Version 1 to 2
Added
Added new Power Supply Kits.
Changed
Overview, Standard Features, Service and Support,
Specifications were revised.
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such pr
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
c04346217 - 15029 - Worldwide - V8 - 2-July-2018
PSU and 400W BBU 2-pack FIO Kit was added to the
Related Options, Power Specifications, and Technical
oducts and services.
Loading...