HPE 704654-B21 Getting Started Guide

QuickSpecs
HPE Moonshot-45XGc Switch Module

Overview

Page 1
Moonshot-45XGc Switch Module
The
latency connectivity while dramatically reducing cost and complexity of deploying solutions at scale. The 45 Module, provide external to the chassis features and resiliency. single entity with The Hewlett Packard Enterprise Intelligent Resilient Framework (IRF).
Figure 1 HPE Moonshot-45XGc Switch Module
1.
Release Latch
6.
Health Status LED
2.
Access Panel Sensor
7.
Power LED
3.
Unit ID (UID) LED / Button
4.
Downlink Activity LED
5.
Uplink Activity LED
Models
HP Moonshot-45XGc Switch Module Kit
704654-B21
NOTE: Must order one each of the Switch Module Kit per chassis.
HPE Moonshot System QuickSpecs: https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04168328
HPE Moonshot-45XGc Switch Module is designed to provide high speed, low-
XGc Switch Module, together with the HPE Moonshot-4QSFP+ Uplink
s 10GbE network connections to cartridges within the HPE Moonshot 1500 chassis and 40Gb/10Gb connectivity
. This switch is based on the HPE Comware v7 network operating system, which provides enterprise-grade
Up to two switch modules are supported in each chassis, and they can be combined and managed as a
NOTE: For ordering the HPE Moonshot-45XGc Switch Module, please see Step 1 of the Configuration to Order section of the
QuickSpecs
Moonshot-45XGc Switch Module

Standard Features

Page 2
Performance
160Gb uplink bandwidth / 450Gb available server side bandwidth
Management
Remote configuration and management CLI
Security
Layer 2 Switching
128K MAC addresses
IEEE 802.1ad QinQ VLANs
Wire-speed switching and IPv4/IPv6 routing on all ports
Combine up to 4 switches into a single virtual switch
QSFP+ ports support 4 x 10Gb with optional breakout cable
Cut-through switching
Hardware-based wire-speed access control lists (ACLs)
Data Center Bridging (DCBX)
Support for VEPA (IEEE 802.1Qbg)
Standards-based SNMP management via SNMPv1, v2c and v3
Out of band management via iLO Chassis Manager
HPE IMC (Intelligent Management Center)
SDN with OpenFlow 1.3
RJ45 console port
sFlow
Manager and operator privilege levels
Command authorization via RADIUS
Complete session logging for problem resolution
LLDP Discovery protocol
IPv6 management
Multiple flash images
Multiple configuration files
Syslog
Network Time Protocol (NTP)
IEEE 1588v2 Precision Time Protocol (PTP)
IEEE 802.1X user authentication
MAC-based authentication with RADIUS server
Access Control Lists (ACLs)
Secure FTP
STP Root Guard
DHCP Protection from unauthorized DHCP servers
IP Source Guard
Dynamic ARP protection to prevent eavesdropping
Endpoint Admission Defense (EAD)
RADIUS/TACACS+
Secure management via SSHv2 and SNMPv3
Unicast Reverse Path Forwarding (URPF)
Monitor link and Smart link
IPsec
IKE (Internet Key Exchange)
Disable password recovery
4094 VLANs
QuickSpecs
Moonshot-45XGc Switch Module
Standard Features
c04384058 - DA - 15071 Worldwide - Version 4 - September 30, 2016
Page 3
Per VLAN Spanning Tree (PVST+)
Layer 3 Routing
IPv4 routing protocols - static routes, RIP, OSPF and BGP
Quality of Service (QoS)
Advanced classifier-based QoS (with eight queues) - classifies traffic using multiple match
Resiliency and High
Intelligent Resilient Framework (IRF) - Creates virtual resilient switching fabrics, up to four
acting as a single Layer 2/3 switch; Switches do not have to
Monitoring and
OAM (802.3ah) - Detects data link layer problems in the "last mile"; monitors link status
Private VLANs (PVLAN)
Multicast VLAN Registration Protocol (MVRP)
Jumbo frame support
Port Aggregation
Spanning Tree Protocol, MSTP, RSTP, STP Root Guard
IP Multicast Snooping and data-driven IGMP
Transparent Interconnect of Lots of Links (TRILL)
Shortest Path Bridging (SPB)
Multiple Label Switching (MPLS)
Virtual Private LAN Service (VPLS)
IPv6 routing protocols - static routes, RIPng, OSPFv3 and BGP+
IPv6 tunneling
IP Multicast - PIM-SSM, PIM-DM, PIM-SM, IGMP for IPv4 and IPv6
Equal-Cost Multipath (ECMP)
Policy-based routing
DHCP and DHCPv6 client
VRRP
criteria
based on Layer 2, 3 and 4 information and applies QoS policies such as priority level and rate
limit to selected traffic on a per-port or per-VLAN basis
Traffic policing - supports Committed Access Rate (CAR) and line rate
Powerful QoS feature - creates traffic classes based on access control lists (ACL), IEEE 802.1p
precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror or
remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), and weighted random early discard (WRED)
Storm restraint - allows limitation of broadcast, multicast, and unknown unicast traffic rate to
cut down on unwanted broadcast traffic on the network
Availability
Moonshot-45XGc switch modules be co-located and can be part of a disaster recovery system; Servers or switches can be attached using standard LACP for automatic load balancing and high availability; Simplifies network operation by eliminating Spanning Tree, ECMP and VRRP; IRF supports up to four members in a group.
Device Link Detection Protocol (DLDP) - Monitors Link connectivity and shuts down ports at
both ends if unidirectional traffic is detected
Virtual Router Redundancy Protocol (VRRP)
Diagnostics
between two devices
CFD (802.1ag) - Connectivity Fault Detection (CFD) provides L2 link OAM mechanism used
for link connectivity detection and fault location
Mirroring - Port mirroring enables traffic on a port to be simultaneously sent to a network
analyzer for monitoring; Flow-based mirroring
QuickSpecs
Moonshot-45XGc Switch Module

Compatibility

Page 4
Chassis
HPE Moonshot 1500 Chassis
HPE ProLiant Servers
HPE ProLiant m400 Server HPE ProLiant m710 Server
HPE Moonshot Uplink
HPE Moonshot-4QSFP+ Uplink Module
Modules
Loading...
+ 8 hidden pages