HPE 704642-B21 Getting Started Guide

QuickSpecs

HPE Moonshot-180G Switch Module

Overview

Page 1

HPE Moonshot-180G Switch Module

The HPE Moonshot-180G Switch Module is designed to provide high speed, low-latency connectivity while dramatically reducing cost and complexity of deploying solutions at scale. The 180G Switch Module provides 1GbE network c nodes in the stacking two switches within a single chassis or across multiple chassis.

HPE Moonshot-180G Switch Module

Release Latch

Uplink Activity LED

Access Panel Sensor

Health Status LED

Unit ID (UID) LED / Button

Power LED

Downlink Activity LED

Cartridge health LED

Models

HP Moonshot-180G Switch Module Kit

704642-B21

onnections to up to 180

HPE Moonshot 1500 chassis. Up to two switch modules are supported in each chassis. Failover can be enabled by

QuickSpecs

HPE Moonshot-180G Switch Module

Standard Features

Page 2

Standard Features

Performance

• Non-blocking architecture

Management

• Dual Software Images

Stacking

•

Switching

• AutoInstall

•

• Wire speed switching and IPv4 routing on all ports

• QSFP+ ports support either 40Gb or10Gb depending on module inserted

• Store and Forward Switching

• Hardware-based wire-speed access control lists (ACLs)

• TACACS+

• Management Port Access Control

• Password Management (history)

• DoS Attack Prevention (Network and CPU)

• Configurable Management VLAN

• SSL 3.0 and TLS 1.0

o RFC 2246 - The TLS Protocol, Version 1.0 o RFC 2346 - AES Ciphersuites for Transport Layer Security o RFC 2818 - HTTP over TLS

• SSH 1.5 and 2.0

o Draft-ietf-secsh-transport-16 - SSH Transport Layer Protocol o Draft-ietf-secsh-userauth-17 - SSH Authentication Protocol o Draft-ietf-secsh-connect-17 - SSH Connection Protocol o Draft-ietf-secsh-architecture-14 - SSH Protocol Architecture o Draft-ietf-secsh-publickeyfile-03 - SECSH Public Key File Format o Draft-ietf-secsh-dh-group-exchange-04 - Diffie-Hellman Group Exchange for the

SSH Transport Layer Protocol

• HTML 4.0 Specification - December, 1997

• Java and Java Script 1.3

• Advanced Management Features:

o Industry Standard CLI with the following features: scripting capability, command

completion, context sensitive help

o Optional User Password Encryption

• Multi-session Telnet Server

Redundant Management Unit support

• Single IP Address Management

• Non Stop Forwarding on loss of management control unit

• Automation Election of Management Control Unit

• Distribution of Code and Configuration throughout Stack

• Hot-Plug Support: Optional Modules & Stack Units

• Offline Configuration of Modules and Stack Units

• Broadcast/Multicast/Unicast Storm Recovery

• Cable Test

• CPU/Memory Utilization

• DHCP Filtering

• DHCP Snooping

• DHCPv6 Client Support

• DNS Client

Double VLAN/vMAN Tagging

QuickSpecs

HPE Moonshot-180G Switch Module

Standard Features

Page 3

• Dynamic ARP Inspection

Routing

• DNS Client

• VLAN and Port based Routing

• Event and Error Logging Facility

• Flow-Based Port Mirroring

• Friendly Port Naming

• GARP - Generic Attribute Registration Protocol

• GMRP - Dynamic L2 Multicast Registration

• GVRP - Dynamic VLAN Registration

• IGMP Snooping Querier

• IGMP/MLD Snooping

• IP Source Guard

• IP subnet-based VLANs

• iSCSI Flow Acceleration

• ISDP (CDP-interoperability)

• Jumbo Ethernet Frames

• Network and Host DoS protection

• Ping Utility

• Port MAC Locking

• Port Mirroring

• Protected Port

• Protocol, MAC & IP Subnet Based VLANs

• IP Address Conflict Notification

• Email Alerts

• SNTP over IPv6

• Selectable LAG Hashing algorithm

• Service Aware Flow Control (SAFC) on Stacking Links

• sFlow

• STP Root Guard/BPDU Guard/TCN Guard/LoopGuard/BPDUFilter/BPDUFlood

• TACACS+

• VLAN Assignment [RFC 3580]

• VLAN Guest

• VLAN Private Edge

• VLAN Unauthenticated

• VLAN Voice

• Internal 802.1x Authentication Server

• 802.1x Monitor Mode

• RADIUS based Dynamic VLAN Assignment

• ECMP

• ICMP Throttling

• Loopback

• Multinetting

• Multiple Helper IPs

• OSPF point-to-point links

• OSPF virtual links

• Proxy ARP

• Route Redistribution across RIP, OSPF and BGP

• Routing Enhancements

o Clear ip(v7) ospf o Display of route timestamp o NDP aging fix

• Static routing

• Traceroute

• UDP Relay/IP Helper

QuickSpecs

HPE Moonshot-180G Switch Module

Standard Features

Page 4

• VRRP Route Interface tracking

Quality of Service (QoS)

• Access Control Lists (ACLs)

• Pingable VRRP Virtual Addresses

• Configurable Routing Limits

• Enhanced ECMP Hashing Algorithm

& DiffServ Module

o ACL Logging o ACL Mirroring o o Permit/ Deny actions for Inbound or Outbound IP traffic classification based on:

 Type of Service (TOS) or Differentiated Services (DS) DSCP field  Source/Destination IP Address  TCP / UDP Source/Destination Port  IP Protocol Number

o Permit/Deny actions for Inbound or Outbound Layer 2 traffic classification based on:

 Source/Destination MAC Address  Ethertype  802.1p user priority (outer and/or inner VLAN tag)  VLAN identifier value or range (outer and/or inner VLAN tag)

• Class of Service (CoS) Module

o Direct user configuration of the following:

 IP Precedence to traffic class mapping  IP DSCP to traffic class mapping  Interface trust mode: 802.1p, IP Precedence, IP DSCP, or untrusted  Interface traffic shaping rate  Minimum and maximum bandwidth per queue  Strict priority versus weighted (WRR/WFQ) scheduling per queue  Tail drop versus weighted random early detection (WRED) queue depth

management

o Egress DiffServ o Egress ACLs o Named Access Lists o Time Based ACLs o Policy Dynamic Slice Sizing

+ 9 hidden pages