HPE 681842-B21 Getting Started Guide

QuickSpecs

HPE BladeSystem c7000 Enclosure

Overview

Page 1

HPE BladeSystem c7000 Enclosure

HPE BladeSystem c7000 Enclosure - Front View

HPE BladeSystem c7000 Enclosure - Rear View

1-16.

Device Bays 1-16

Active Cool 200 Fans and Fan Bays

17-22.

Power Supply Bays 1-6

Interconnect Module Bays

23.

Insight Display

BladeSystem Onboard Administrator (left) and optional redundant Onboard Administrator (right)

Power Inputs (single-phase 200-240V AC model shown)

QuickSpecs

HPE BladeSystem c7000 Enclosure

Standard Features

HPE BladeSystem

An HPE BladeSystem solution starts with either a BladeSystem c7000 or c3000 enclosure. For the c7000 e Cool Fans, a key components have been selected, the following components can be added: interconnect modules, ProLiant software. For information on these options please visit:

systems/bladesystem.html

NOTE:

A BladeSystem c7000 blades plus redundant network and storage interconnects. It includes a shared, multi mid through a pooled power backplane that ensures the full capacity of the redundant hot available to all

Each c7000

48V DC,

improved power consumption and acoustics, Active Cool 200 Fan kits can be added for a maximum of

An BladeSystem Onboard Administrator management module is bui functions:

A BladeSystem c7000

• Accommodates multiple server and network designs in one enclosure.

c-Class c7000 Enclosure

nclosure, key enclosure options include hot-plug power supplies, power input module, hot-plug HPE Active

nd an optional redundant BladeSystem Onboard Administrator module. Once the enclosure and its

or Integrity server blades, expansion blades, and HPE OneView or Insight Control management

Insight Control is not supported with Gen10 server blades.

https://www.hpe.com/us/en/integrated-

Enclosure holds up to 16 server blades and up to 8 compute, storage or workstation

plane for wire-once connectivity of server blades to network and shared storage. Power is delivered

system components.

• Up to 16 half-height server blades, 8 full-height server blades, and/or 8 expansion blades per

• Up to 4 redundant interconnect I/O fabrics (Ethernet, Fibre Channel, InfiniBand, iSCSI, SAS, etc.)

enclosure is built with the following functions:

enclosure (not exceeding 16 total blades).

NOTE: For information on mixing half-height server blades, full-height server blades, and expansion blades, please see the section titled "Device Bay and Fan Bay Numbering and Population Guidelines" later in this document.

supported simultaneously within the enclosure.

• Choice of single-phase high-line AC, three-phase high-line AC, single-phase high voltage AC, -

or high voltage DC power options for flexibility in connecting to datacenter power.

• HPE Thermal Logic technology to minimize power consumption and reduce cooling.

• A minimum of four hot-plug HPE Active Cool 200 Fans. For additional capacity, redundancy, and

HPE

-terabit high-speed

-plug power supplies is

10 fans.

• Redundant hot-plug cooling, redundant hot-plug power supplies, redundant connections, redundant

interconnect modules, and optional redundant BladeSystem Onboard Administrator management module.

• Robust, multiple enclosure setup and control.

• Reports asset and inventory information for the devices in the enclosure.

• Reports thermal and power information, including real-time actual power usage per server and per

enclosure.

• Front-mounted Insight Display for easy management within the datacenter.

• Integrated access to all server blade iLOs from a single cable.

• Provides integrated access to interconnect bay device management ports from the single

BladeSystem Onboard Administrator cable.

• Single sign-on capability for all devices in the enclosure

• Role-based security locally and/or with LDAP directory services.

• Provides a wizard-based initial setup process for easy configuration.

enclosure provides the following benefits:

• With local and remote hardware management integrated across the solution, one full enclosure can be

managed as easily as one server.

• Management and network interconnects extend scalability beyond a single enclosure, allowing

resources to be pooled and shared across multiple enclosures.

lt in to the enclosure with the following

Page

QuickSpecs

Standard Features

Page 3

• Lower costs per server in comparison to rack-mounted servers.

HPE BladeSystem

For customers that need a smaller blade system, the HPE BladeSystem c-Class c3000 Enclosure is the perfect solution. Supporting up to 8 blades and 4 interconnects, the c3000 enclosure provides an ideal solution for small and medium businesses and remote si visit:

HPE ProLiant &

Delivering best-in-class performance, choice and reliability on Intel® Xeon® and Intel® Itanium ® processors for Windows, Linux, Solaris, OpenVMS or variety of application requirements for scale four information please visit:

HPE Storage Blade

Do you need a direct attached storage solution within your BladeSystem enclosure?

Direct attached storage

The D2220sb Storage Blade delivers direct attached storage for support for up to twelve hot plug small form factor (SFF) SAS or SATA Midline hard disk drives or SAS/SATA SSDs. The enclosure backplane provides a PCI Express connection to an adjacent c e an onboard Smart Array P420i controller with 2GB flash data protection. Up to eight D2220sb storage de Enclosure for up to 115.2 TB of capacity.

The D2500sb Storage Blade delivers direct attached storage to the HPE ProLiant BL460c Gen10 , with support for up to 12 (twelve) hot plug small form factor (SFF SSDs. The enclosure backplane provides a PCI Express connection to the adjacent c enables high performance storage access without any additional cables. The D2500sb Storage Blade includes an protection. Up to eight D2500sb storage devices can be supported in a single BladeSystem c7000 enclosure.

NOTE: NOTE:

For more information, please visit:

Dynamic Power

HPE Dynamic Power Capping is the industry's first power capping solution that lets you reclaim trapped power and cooling capacity without putting electrical infrastructure or server performance at risk. The enclosure Dynamic Power Cap will be shared amongst a changed to match the server load. This will optimize the performance of the servers while ensuring that the enclosure stays below the cap value.

Rack Airflow

Rack 10000 G2 series cabinets

The increasing power of new high rack these racks to be fully loaded with servers using the latest processors.

c-Class c3000 Enclosure

HPE BladeSystem c7000 Enclosure

• Lower power consumption in comparison to rack-mounted servers.

• Lower airflow requirements in comparison to rack-mounted servers.

• Reduced and simplified cabling in comparison to rack-mounted servers.

• Investment protection supporting G1 through Gen9 server blades.

tes. For more information please

https://www.hpe.com/us/en/integrated-systems/bladesystem.html

Integrity Server Blades

HP-UX based servers; the HPE portfolio of server blades supports a

-out architectures. Hewlett Packard Enterprise offers one-, two-,

- , or eight processor server blades, with the widest range of performance, and form factors. For more https://www.hpe.com/us/en/integrated-systems/bladesystem.html.

c-Class Gen8 and greater server blades with

nables high performance storage access without any additional cables. The D2220sb Storage Blade features

-backed write cache for increased performance and

vices can be supported in a single BladeSystem c7000

) SAS or SATA hard disk drives or SAS/SATA

internal Smart Array controller with 2GB flash-backed write cache, for increased performance and data

The D2220sb and D2500sb require a c7000 Enclosure configuration with 10 fans. The D2220sb is compatible only with Gen8 and Gen9 server blades.

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111399.

Capping

ll of the installed devices and individual server caps will be

See more in your Onboard Administrator documentation.

Requirements

-mounted servers. The G2 10000 Series Racks provide enhanced airflow for maximum cooling, allowing

-performance processor technology requires increased cooling efficiency for

-Class server blade and

QuickSpecs

HPE BladeSystem c7000 Enclosure

Standard Features

Page 4

NOTE: For operation with the -48VDC input module, the G2 1000 Series Rack Extension is required to allow DC power cabling to be installed.

CAUTION:

Planning Guide” at

Third-party racks

CAUTION:

airflow and to prevent damage to the equipment:

•

− Maximum rail length: 864 mm (34 in)

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack can lead to thermal damage.

CAUTION:

Planning Guide” at

Factory Express

HPE Factory Express offers configuration, customization, integration and deployment services for Hewlett Packard Enterprise servers tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design service packaging. servers and storage: HPE switches.

For more information on Factory Express services for your specific server model please con representative or go to:

HPE Simple

HPE One Config Simple (OCS) is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require configuration for products not available in Authorized Partner for assistance.

HPE OneView Software

The HPE OneView architecture combines server, storage, and networking with control of datacenter environmentals into a single, integrated management platform. Architected to deliver lifecycle

For the complete list of installation requirements, please see the “HPE BladeSystem c-Class Site

http://www.hpe.com/support/hpesc.

If a third-party rack is used, observe the following additional requirements to ensure adequate

Front and rear doors: If your server rack includes closing front and rear doors, you must have a minimum of 65% free area compared to the total area of the door evenly distributed from top to bottom to permit adequate airflow.

• Front door: The clearance from face of rack to inside of the front door must be a minimum of 77

mm (3 in).

• Rear door: The clearance between the rear of the enclosure and the rear rack door must be a

minimum of 175 mm (6.9 in) to accommodate system cabling.

• Side: The clearance between the installed rack component and the side panels of the rack must be

a minimum of 70 mm (2.75 in).

• Width: 483 mm (19 in)

• Depth: Maximum clearance between front and rear RETMA rails is 864 mm (34 in). Minimum

clearance for round-hole racks is 627 mm (24.7 in). Minimum clearance for square-hole racks is 635 mm (25 in).

• The rack must be able to accept the adjustable rack rails that are shipped with each enclosure:

− Minimum rail length: 635 mm (25 in)

without blanking panels results in improper cooling that

For the complete list of installation requirements, please see the “HPE BladeSystem c-Class Site

http://www.hpe.com/support/hpesc.

Portfolio for Servers and

and storage products. Customers can choose how their factory solutions are built,

Storage

s as well as individual factory services, such as image loading, asset tagging and custom

Hewlett Packard Enterprise products supported through Factory Express include: a wide array of

HPE Integrity, HPE ProLiant & HPE ProLiant & Integrity Server Blades, HPE BladeSystem,

9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network

http://www.hpe.com/info/factoryexpress

Configurator

https://h22174.www2.hpe.com/SimplifiedConfig/Welcome.

OCS, please contact HPE's Customer Business Center or an

"custom" rack configuration or

tact your sales

QuickSpecs

HPE BladeSystem c7000 Enclosure

Standard Features

Page 5

management for the complete Converged Infrastructure, it facilitates collaboration, removes friction, collapses cycle times, eliminates error of servers and virtual connect with ope With OneView, you'll work smarter Converged Infrastructure.

For more see:

HPE Insight

Insight Management

Managing the growing number of servers can be complex and expensive for your

Service Pack for ProLiant (SPP)

Customers should use the HPE Service Pack for ProLiant (SPP) to perform firmware,

HPE Integrated Lights

HPE Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and

location via a web browser. HPE iLO works hand-in-hand with HPE Systems Insight

-prone work, and accelerates time to value. HPE OneView combines management n integration to automate and customize existing tools and processes.

-with greater visibility and control-and fully capitalize on the benefits of a

information on Hewlett Packard Enterprise OneView management,

https://www.hpe.com/us/en/product-catalog/detail/pip.5410258.html.

Management software

organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HPE Insight Management lowers the cost of running your HPE ProLiant servers by providing you with best-in-class management tools, including HPE Insight Control, HPE Virtual Connect Enterprise Manager (VCEM), and HPE Insight Dynamics / Matrix Operating Environment. Insight Management increases your productivity and reduces your operating costs to get you higher value from your HPE ProLiant servers.

Electronic download of Insight Management Media Insight Management software media is available for free download (not including license entitlement certificates) at this website: http://www.hpe.com/info/servermanagement

Software media available for download includes:

• HPE Insight Control

• HPE Insight Control for Microsoft® System Center

• HPE Insight Control for VMware vCenter Server

• HPE Virtual Connect Enterprise Manager (VCEM)

• HPE Insight Dynamics / Matrix Operating Environment

Customers will receive an Insight Control or Insight Dynamics license entitlement certificate via physical shipment or email. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s).

One year of 24x7 Software Technical Support and Updates are included with your purchased licenses.

Hewlett Packard Enterprise provides a complete range of installation and support services to ensure the successful deployment and operations of your server infrastructure. For more information about support services and licensing options, see the following website: http://www.hpe.com/info/servermanagement

Insight Software Media Kit (DVDs) Physical media (DVDs) are also available for purchase from Hewlett Packard Enterprise or from your authorized reseller

NOTE: Insight Management is not supported with Gen10 server blades.

driver, and related software updates: https://www.hpe.com/servers/spp/

-Out (iLO)

thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HPE iLO functions without additional software and can be accessed from any

QuickSpecs

HPE BladeSystem c7000 Enclosure

Standard Features

Page 6

Manager, Insight Control and Insight Dynamics for ProLiant, helping customers

HPE Insight Control

HPE Insight Control, a product option, delivers essential infrastructure management

HPE Matrix Operating Environment

The HPE Matrix Operating Environment (Matrix OE) for ProLiant and Integrity servers

demands. This advanced infrastructure management software lets you reduce the cost

HPE Power

The HPE Power Advisor is a tool provided by Hewlett Packard Enterprise to assist in the estimation of power consumption system, rack, and multi of materials, a cost of owner ship calculator, and a power report. The of rack,

HPE have selected can fully support your BladeSystem configuration and t for facilities planning purposes.

HPE

Warranty

Warranty - This product is covered by a global limited warranty and supported by HPE Services and a

worldwide network of and repair is available for three years from date of purcha for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through customized service agreements.

the warranty period for the system in which they are installed

unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit:

that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see http://www.hpe.com/info/servermanagement..

HPE Insight Control includes one year of 24 x 7 HPE Software Technical Support and Update Service ensuring rapid access to Hewlett Packard Enterprise support staff and proactive delivery of software updates. For more information about this service, please

http://www.hpe.com/us/en/services/foundation-care-services.html.

visit:

NOTE: Insight Control is not supported with Gen10 server blades.

is an integrated command center that helps you instantly adjust to dynamic business

of common data center tasks by up to 40 percent while keeping pace with your changing business.

The HPE Matrix OE includes the automated provisioning, optimization, and recovery management capabilities for HPE CloudSystem Matrix, the ideal platform for private cloud and Infrastructure as a Service (IaaS).

NOTE: For more information, visit:

http://www.hpe.com/info/ilo

http://www.hpe.com/info/matrixoe.

Advisor

at power up of a system and proper selection of components including power supplies at a

-rack level. A variety of additional features are also provided including a condensed bill HPE Power Advisor allows for the mixing

tower, blade, and other products in a single environment.

highly recommends using the HPE Power Advisor tool to ensure the number of power supply options you

o review maximum system power ratings

Power Advisor is available at: http://www.hpe.com/servers/hppoweradvisor

Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support

se. Support for software and initial setup is available

• Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions and

exclusions apply

• Enclosure options: Fans, power supplies, BladeSystem Onboard Administrator, 1 year parts only or

enclosure warranty

• HPE BladeSystem Interconnects: 1 year parts and labor, on-site regardless of the warranty period for

the system in which they are installed

• HPE Storage Fibre Channel switches have a maximum warranty period of one (1) year regardless of

HPE Pointnext operational services or

QuickSpecs

HPE BladeSystem c7000 Enclosure

Standard Features

Page 7

• Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs for

details.

QuickSpecs

HPE BladeSystem c7000 Enclosure

Service and Support

HPE Technology Services for Industry Standard Servers

HPE Connect technology lets you to tap into the knowledge of m and in control, anywhere, any time.

Protect your business beyond warranty with

HPE Pointnext operational services time as you purchase your new server, giving you full entitlement for the term you select.

NOTE:

purchased.

Connect your devices to

Unlock all of the benefits of your technology investment by connecting your products to HPE. Achieve up to 77% reduction in down time, near 100% diagnostic accuracy and a single consolidated view of your

environment. By connecting, you will receive 24x7monitoring, pre automatic parts dispatch. benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, se Packard Enterprise support

HPE Support Center

Personalized online support portal with access to information, tools and experts to support Hewlett Packard Enterprise business products access support resources or collaborate with peers. Learn more

support.html

The HPE Support live support. Now, you can get access to personalize IT support anywhere, anytime. Support and warranty

NOTE:

Parts and Materials

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts and components that have reached their maximum supported limitations as set forth in the manufacturer's operating manual, product quick data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retenti by Hewlett Packard Enterprise due to malfunction.

For more information

To learn more on HPE ProLiant servers and HPE BladeSystem servers, please contact your Hewlett Packard Enterprise sales visit: https://www.hpe.com/us/en/integrated-systems/bladesystem.html

Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.

to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support

illions of devices and thousands of experts to stay informed

HPE Pointnext operational services

enable you to order the right service level, length of coverage and response

Power supplies are covered as a part of the server infrastructure. No separate care packs need to be

HPE:

-failure alerts, automatic call logging, and

HPE Proactive Care Service and HPE Datacenter Care Service customers will also

curely connected to Hewlett

. Submit support cases online, chat with Hewlett Packard Enterprise experts,

: https://www.hpe.com/us/en/services/it-

Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for

HPE Support Center are available at no additional cost with an Hewlett Packard Enterprise

, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.

HPE Support Center Mobile App is subject to local availability.

lifetime and/or the maximum usage

-specs, or the technical product

on service feature option applies only to Disk or eligible SSD/Flash Drives replaced

representative or Hewlett Packard Enterprise Authorized Channel Partner. Or

HPE Insight Remote

Page

QuickSpecs

HPE BladeSystem c7000 Enclosure

Pre

HPE BladeSystem

NOTE: Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models.

Any additional options purchased will be shipped separately.

NOTE: If you desire a custom configuration, please see the "Configuration Information - Factory Integrated Models" section of this QuickSpecs.

NOTE: Each BladeSystem c7000 Enclosure holds up to 16 half-height server blades, 8 full-height server blades, and/or 8 expansion blades per enclosure (not exceeding 16 total blades).

HPE BLc7000 Platinum Enclosure with 1 Phase 6 Pwr Supplies 10 Fans ROHS 16 OneView Licenses

763850-B21

NOTE: The c7000 Platinum Enclosure 763850-B21 includes sixteen (16) HPE OneView licenses, six (6) 2400W Platinum hot C19 (10) hot following blanking panels: 15 device bay, 7 interconnect module bay, and 1 redundant Onboard Administrator module bay.

-configured Models

c-Class Server Blade Enclosures

-plug power supplies each with a worldwide 250W

- C20 2.0m jumper cord, a single-phase 200-240V AC Intelligent Power Module, ten

-plug Active Cool 200 Fans, an Onboard Administrator with KVM, and the

Page

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

NOTE: This section lists some of the required and optional steps to configure a Factory Integrated Model. To ensure only valid

Step 1: Select desired model, configuration, and quantity of HPE ProLiant server and expansion blades per enclosure (required)

NOTE: Each BladeSystem c7000 Enclosure holds up to 16 half-height server blades, 8 full-height server blades, and/or 8

Step 2: Determine the HPE BladeSystem c-Class Enclosure(s) and choose options (required)

Select the base server blade enclosure configuration (required)

HPE BladeSystem

NOTE:

Active Cool 200 Fans. The power module, power supply kits, power cables, interconnects, additional fans, etc. are added per the steps below.

NOTE:

fan, power, and redundant OA module) as required per the ordered configuration. If the configuration is modified at a later date, additional blanking panels (ordered separately) may be required.

HPE BLc7000 Configure-to-order Platinum Enclosure with ROHS Trial Insight Control License

681844-B21

HPE Integrity BLc7000 CTO Enclosure

AD361D

NOTE: The AD361D enclosure is suggested for configurations primarily used with Integrity blades.

NOTE:

Administrators with KVM, six (6) hot Cool 200 Fans. Additional components are added per the steps below.

HPE BLc7000 TAA-compliant Configure-to-order Platinum Enclosure with 2x Onboard Admin 6x PS 10x Fans

681844-B22

NOTE: HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal Government customers. These products are either manufactured or substantially transformed in a designated country.

Select the enclosure power and cooling options (required)

HPE c-Class

c-Class Power Modules (1 per enclosure)

HPE BLc7000 Special/Promotional Enclosure

677595-B21

NOTE: This power module is for single phase, high-line 200-240VAC applications and has six blue IEC

NOTE:

Power Discov enabled power system including an Intelligent Power Distribution Unit (iPDU), C19 iPDU cables, and the Platinum power supply kits 733459 c

NOTE:

Discovery Services are disabled. One WW 250W C19-C20 2.0m (non-iPDU) cable is

configurations are ordered, Hewlett Packard Enterprise recommends contacting your local sales representative for information on Factory Integrated Model product offerings and requirements. For a configuration of the HPE BladeSystem, please do the following:

expansion blades per enclosure (not exceeding 16 total blades).

(One of the following from each list unless otherwise noted)

The enclosures listed below include an Onboard Administrator with KVM and four (4) hot-plug

BLc7000 c-Class Server Blade Enclosures

The enclosures listed below include the required blanking panels (device bay, interconnect module,

The TAA-compliant enclosure listed below includes two (2) Onboard

-plug power supplies, and ten (10) hot-plug Active

Power Systems

-Class Power Supply sections below for these options.

-320 C20 power connectors that accept IEC C19-C20 power cables.

The blue power connectors indicate HPE Power Discovery Services capability. HPE

ery Services are enabled when used with a HPE Power Discovery Services-

-C20

-B21,. See the iPDU, iPDU cable,

Also accepts standard (non-iPDU) C19 to C20 power cables, but HPE Power

Page

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

Page 11

included per supported power supply. Supported power supplies are listed here.

NOTE:

"c-Class Power Supply" section below for the power supply kits.

HPE BLc7000 1 PH FIO Power Module Option

413379-B21

NOTE:

six IEC

C20 power cables. One WW 250W C19 power suppl

NOTE:

"c NOTE: This power module disables HPE Power Discovery Services.

HPE BLc7000 3 PH Intl FIO Power Module Option

413381-B21

NOTE: This power module is for three phase, high-line 200-240VAC international applications and has two 3.05m (10 ft) power cables with IEC V, 5

NOTE:

NOTE: NOTE:

redundancy, 6 power supply option kits are required.

HP BLc7000 3 PH NA/JP FIO Power Module Option

413380-B21

NOTE: This power module is for three phase, high-line 200-208VAC North America and Japan applications and has two 3.05m (10 ft) power cables with NEMA L15 connectors.

NOTE:

NOTE: NOTE:

redundancy, 6 power supply option kits are required.

HPE BLc7000 -48V DC Power Input Module

AH331A

NOTE:

1/4 2H terminal lug connectors. It is used with the HPE 2250W Supply Kit, AH332A. See the "c kits. NOTE: This power module disables HPE Power Discovery Services.

HPE HVDC 1PH AC Power Module BLc FIO Option

753623-B21

NOTE: This power module is for 277VAC and 380VDC applications and has six APP SafD (753618 power supply

NOTE:

(277VAC applications) and J6X00A (277VAC or 380VDC applications).

NOTE:

c-Class Power Supply (Up to 6)

NOTE: HPE highly recommends using the HPE Power Advisor tool to ensure the number

of power supply options you have selected can fully support your BladeSystem configuration and t purposes. HPE Power Advisor is available at:

NOTE:

supplies is not supported, except during hot swaps to different level or higher efficient power supplies. The Onboard Administrator will exhibit a mismatch error due to mixed

This power module may be used with the power supply kits 733459-B21 . See the

This power module is for single phase, high-line 200-240VAC applications and has

-320 C20 power connectors that accept IEC C19-

-C20 2.0m (non-iPDU) cable is included per supported power supply. Supported ies are listed here.

This power module may be used with the power supply kits 733459-B21. See the

-Class Power Supply" section below for the power supply kits.

-309 200/346 V - 240/415

-Pin, 6h, 16A connectors. This power module may be used with the power supply kits 733459-B21. See the

-Class Power Supply" section below for the power supply kits. This power module disables HPE Power Discovery Services. This power module requires a minimum of 3 power supply option kits. For full

-30p

This power module may be used with the power supply kits 733459-B21. See the

-Class Power Supply" section below for the power supply kits. This power module disables HPE Power Discovery Services. This power module requires a minimum of 3 power supply option kits. For full

This power module is for -36VDC to -72VDC applications and has 45DG 4AWG

-48VDC Hot Plug Power

-Class Power Supply" section below for the power supply

-Grid connectors. It is used with the HPE 2650W Universal Hot Plug Power Supply Kits

-B21 or 753619-B21). See the "c-Class Power Supply" section below for the kits.

Cables are not included and may be ordered separately; see cable options J6X03A

This power module disables HPE Power Discovery Services.

o review maximum system power ratings for facilities planning

http://www.hpe.com/info/hppoweradvisor

Each enclosure must include only one type of power supply. Mixing of power

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

Page 12

power supplies until all power supplies are matched.

minimum of 3 power supply option kits is required. For full redundancy, 6 power supply option kits are required.

NOTE:

efficiency requirements: Platinum (94%) and Gold (92%). unique forum that unites electric utilities, the computer industry, and consumers in an effort to bring energy efficient technology solutions to the marketplace. independently tests power supply efficiency and publically posts the results on not eligible for 80 PLUS testing; efficiency is per HPE internal testing.

HPE 2650W Performance Platinum Hot Plug Power Supply Kit

733459-B21

NOTE: This power supply kit enables HPE Power Discovery Services when used with the HPE BLc7000 Single Phase FIO Intelligent Power Module 677595 Power Modules" section above for the power modules.

NOTE: NOTE:

Climate Savers Computing Initiative PLATINUM and ECOS Consulting 80 PLUS Platinum.

HPE 2650W Performance Universal Hot Plug Power Supply Kit

753618-B21

NOTE: This power supply kit disables HPE Power Discovery Services. NOTE:

B21. See the "c

NOTE:

(277VAC applications) and J6X00A (277VAC or 380VDC applications).

HPE 2650W Performance -48VDC Platinum Hot Plug Power Supply Kit

789934-B21

NOTE: This power supply kit disables HPE Power Discovery Services. NOTE:

48V DC Power Input Module AH331A. See the

"c-Class Power Modules" section above for the power modules.

HPE Cooling

c-Class Active Cool 200 Fan (Up to 6)

NOTE: A minimum of 4 Active Cool 200 Fans is required to a maximum of 10 Active Cool 200 Fans. The

enclosure selected in Step 2 already includes 4 fans allowing up to 6 additional.

NOTE:

redundancy, reduced power consumption, and reduced noise.

NOTE:

200 Fans.

NOTE: NOTE:

Population Guidelines” section of this document.

HPE BLc7000 Enclosure HP Single Active Cool Fan Option Kit

412140-B21

Step 3: Select a software bundle (optional)

HPE Insight

NOTE: The Insight Control licenses listed below support HPE ProLiant c-Class server

blades.

NOTE:

separately, or can be downloaded at:

NOTE:

online or via fax in order to obtain the license activation key(s). Incl 7 HPE Software Technical Support Service.

OTE: If a three phase power module is selected (413380-B21 or 413381-B21), a

HPE c7000 enclosure AC power supplies meet 80 PLUS Platinum or Gold power

The 80 PLUS program is a

80 PLUS

https://plugloadsolutions.com/80PlusPowerSupplies.aspx. DC power supplies are

-B21. See the "c-Class

Includes one WW 250W C19 - C20 2.0m Jumper Cord. This power supply kit meets multiple energy efficiency initiatives: 2650W, 94%:

Options

Compatible with the HPE HVDC 1PH AC Power Module BLc FIO Option 753623-

-Class Power Modules" section above for the power modules.

Cables are not included and may be ordered separately; see cable options J6X03A

Compatible with the HPE BLc7000 -

Ten Active Cool 200 Fans are strongly recommended for maximum cooling efficiency and

Enclosures configured with a three-phase power input module require a minimum of 6 Active Cool

Some blade configurations require 10 Active Cool 200 Fans. For the complete list of fan requirements and recommendations, see the “Server Blade and Fan

(if nothing is selected the enclosure will ship with 16 Insight Control Trial Licenses)

Software

Licenses ship without media. The Insight Management Media Kit can be ordered

http://www.hpe.com/info/insightmanagement

Customer will receive a license entitlement certificate, which must be redeemed

udes one year of 24 x

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

Page 13

NOTE: For additional license kits, please see the QuickSpecs at:

NOTE:

Step 4: Select a redundant BladeSystem Onboard Administrator (optional)

HPE c-Class

HPE BLc7000 Onboard Administrator with KVM Option

456204-B21

NOTE: The HPE c7000 Onboard Administrator (OA) supports the mixing with the HPE c7000 OA with KVM. The enclosure KVM feature. The KVM menu has an OA CLI button at the bottom, which allows an OA administ KVM will become the standby OA. The OA Firmware Sync feature cannot be used to update mismatched OA modules. Mismatched OA firmware versions between the original c7000 OA and c7000 OA update the OA from a file (http, ftp, tftp, local client file using the GUI or USB key containing the OA firmware file).

NOTE:

come with a BladeSystem Onboard Administrator with KVM as standard. Order this part number (456204 desired for a c7000 enclosure.

NOTE:

ProLiant and Integrity server blades, subject to support requirements of the Onboard Administrator. If configuring an enclosure with only Gen9 server blades, Onboard Administrator firmware 4.11 or greater is required. If configuring an enclos of Gen9 and earlier server blades, G6 to Gen9 is supported and requires Onboard Administrator firmware 4.30 or greater. In addition to these requirements, the Onboard Administrator firmware must be a version that supports all the components enclosure. possible for maximum compatibility and stability. Updating the Onboard Administrator firmware may also require other subsystem firmware upgrades. For further information please see the

Support Center

documents “

and c3000 Enclosures and Firmware Servers and Onboard Administrator firmware issues

Step 5: Select 1 or more interconnect modules for each enclosure (required)

The following is a list of various HPE BladeSystem c-Class interconnect modules (Virtual Connect, Ethernet, Fibre Channel,

QuickSpecs to obtain part numbers for interconnect options such as cables, SFPs, etc.

Enclosure Options

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04123391.

Insight Control is not supported with Gen10 server blades.

HPE c7000 OA with KVM must be the active OA to provide the

rator to log into the OA and be able to force a takeover so the OA with

with KVM require the administrator to use the GUI or CLI to

The c7000 enclosure (part numbers 681844-B21, 763850-B21, and AD361D)

-B21) when a second redundant BladeSystem Onboard Administrator is

HPE BladeSystem c3000 and c7000 Enclosures support G1 through Gen9

ure with a mix

in the

Hewlett Packard Enterprise recommends the current firmware whenever

HPE Service Pack for ProLiant (SPP) website and the HPE

HPE ProLiant Server Blades - Compatibility with HPE BladeSystem c7000

” and other documents related to ProLiant Gen9

InfiniBand, and SAS interconnects). A pair of interconnects must be ordered if redundancy is required. For detailed interconnect options, consult the specific interconnect QuickSpecs:

https://www.hpe.com/h20195/v2/getpdf.aspx/c04284204.pdf?ver=10

NOTE: Interconnect bays 1 and 2 support the network (i.e. Ethernet capable) interconnects. These bays connect to the included

network adapter ports in the server blades (either embedded ports on G7 and earlier server blades or FlexibleLOM adapter(s) on Gen8 and later server blades) via the NonStop passive midplane. An enclosure must be configured with at least a network interconnect in interconnect bay 1. NOTE: Interconnect bays 3 through 8 support all interconnects. These bays connect to the mezzanine slots in the server blades via the NonStop passive midplane. Interconnect bays 3 and 4 must contain the same type of interconnect (network, SAN, SAS, etc) as they connect to the same mezzanine slot. Likewise for interconnect bays 5, 6, 7, and 8. NOTE: The HPE BladeSystem c-Class interconnects ship as single units unless otherwise noted. Interconnects must be ordered in quantities of two for redundancy support.

NOTE: Options to specific c-Class interconnects are not included in the list below. Consult the individual interconnect

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

Page 14

HPE BladeSystem

HPE Virtual Connect FlexFabric-20/40 F8 Module for c-Class BladeSystem

691367-B21

NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures with the following SKUs: 5XXXXX

NOTE:

Virtual Connect FlexFabric-20/40 F8 module(s) are installed.

HPE Virtual Connect FlexFabric-20/40 Module for c-Class BladeSystem with TAA

691367-B22

NOTE: Virtual Connect FlexFabric-20/40 F8 modules are supported on c7000 enclosures with the following SKUs: 5XXXXX

NOTE:

Virtual Connect FlexFabric-20/40 F8 module(s) are installed.

HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option

662048-B21

NOTE:

VCEM enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate mus be redeemed online or via fax to obtain the VCEM license activation key.

HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem

638526-B21

HPE Virtual Connect FlexFabric 10Gb/24-port Module with Enterprise Manager Lic

605865-B21

NOTE: 605865-B21 includes 2 x HPE Virtual Connect FlexFabric 10Gb/24-port modules plus 1 x VCEM BL entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitl activation key.

HPE Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem

571956-B21

HPE 6125G/XG Ethernet Blade Switch

658250-B21

Mellanox SX1018HP Ethernet Switch for c-Class BladeSystem

689638-B21

HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem

538113-B21

HPE 10GbE Ethernet Pass-Thru TAA-compliant Module II for c-Class BladeSystem

854194-B22

HPE 10GBase-T SFP+ Transceiver

813874-B21

Cisco B22HP Fabric Extender for BladeSystem c-Class

641146-B21

Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class

657787-B21

NOTE: 657787-B21 includes 16 Cisco Fabric Extender Transceivers. These transceivers can be used to connect the Fabric Extender with a parent Nexus 5000 over optical cable up to 100 meters using OM3 grade fiber.

HPE SAS Switch

NOTE: The HPE 6Gb SAS switches are supported on c7000 enclosures with the following SKUs: 5XXXXX-

B21, 6XXXXX

HPE 6Gb SAS Switch Single Pack for HPE BladeSystem c-Class

BK763A

HPE 6Gb SAS Switch Dual Pack for HPE BladeSystem c-Class

BK764A

HPE BladeSystem

NOTE: HPE Fibre Channel interconnect switches and modules supporting up to a 4Gbps internal port

downlink speed (connection speed from the server blades to the interconnect) ( supported on all c7000 enclosures.

NOTE:

downlink speed (connection speed from the server blades to the interconnect) (

AJ821

NOTE:

downlink speed (connection speed from the server blades to the interconnect) ( C8S47A, 751465 5XXXXX-B21, 6XXXXX-B21, and 7XXXXX-B21. A c7000 Platinum enclosure (SKUs 6XXXXX-B21 and

c-Class Network Interconnects

-B21, 6XXXXX-B21, and 7XXXXX-B21.

A c7000 enclosure with a 10 fan configuration is required when one or more HPE

-B21, 6XXXXX-B21, and 7XXXXX-B21.

A c7000 enclosure with a 10 fan configuration is required when one or more HPE

662048-B21 includes 2 x HPE Virtual Connect Flex-10/10D modules plus 1 x

-c7000 enclosure license. Customer will receive a printed license

ement certificate must be redeemed online or via fax to obtain the VCEM license

-B21, and 7XXXXX-B21.

c-Class SAN Interconnects

HPE Fibre Channel interconnect switches and modules supporting up to an 8Gbps internal port

C, AJ822C, AW563A, and AW564A) are supported on all c7000 enclosures. HPE Fibre Channel interconnect switches and modules supporting up to a 16Gbps internal port

-B21, and 778720-B21) are supported on c7000 enclosures with the following SKUs:

SKUs 403626-B21) are

SKUs 466482-B21, AJ820C

SKUs C8S45A, C8S46A,

QuickSpecs

HPE BladeSystem c7000 Enclosure

Configuration Information Factory Integrated Models

Page 15

7XXXXX-B21) is required to permit the 16Gbps speed on the internal downlink ports. A c7000 enclosure with SKU 5XXXXX-B21 will operate the internal ports up to 8Gbps.

HPE Virtual Connect 16Gb 24-port Fibre Channel Module for c-Class BladeSystem

751465-B21

HPE Virtual Connect 16Gb 24-port Fibre Channel TAA Module for c-Class BladeSystem

778720-B21

HPE Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem

466482-B21

HPE 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem

403626-B21

Brocade 8/12c SAN Switch for BladeSystem c-Class

AJ820C

Brocade 8/24c SAN Switch for BladeSystem c-Class

AJ821C

Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class

AJ822C

Brocade 16Gb/28 SAN Switch for BladeSystem c-Class

C8S46A

Brocade 16Gb/16 SAN Switch for BladeSystem c-Class

C8S45A

Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class

C8S47A

Brocade 8/16Gb Embedded FC Switch 12-port Upgrade LTU

T5517A

HPE BladeSystem

NOTE: The HPE QDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:

5XXXXX

NOTE:

686610-B21, 686611-B21, and 7XXXXX-B21.

HPE 4X FDR InfiniBand Switch for BladeSystem c-Class

648312-B21

Step 6: Select rack (optional)

NOTE: Additional HPE Data Center racks are available than those listed below. For information on the full line of HPE Data

Step 7: Select rack power distribution unit (PDU) (optional)

NOTE:

HPE Power

HPE Basic Power Distribution Units (bPDUs)

HPE Intelligent Power Distribution Units (iPDUs)

HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU

AF520A

HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU

AF522A

HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6) C19/Horizontal NA/JP PDU

AF523A

HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12) C19/Horizontal NA/JP PDU

AF535A

HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal INTL PDU

AF525A

HPE Intelligent Modular 3Ph 11kVA/60309 5-wire 16A/230V Outlets (6) C19/Horizontal INTL PDU

AF526A

HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6) C19/Horizontal INTL PDU

AF527A

HPE Intelligent Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (12) C19/Horizontal INTL PDU

AF538A

InfiniBand Interconnects

Center Racks and rack accessories, please see http://www.hpe.com/info/rackandpower.

NOTE: Additional HPE Power Distribution Units (PDUs) are available than those listed below. For a complete list of all HPE PDUs, please visit: http://www.hpe.com/info/rackandpower

Distribution Units (PDUs)

-B21, 6XXXXX-B21, and 7XXXXX-B21.

The HPE FDR InfiniBand Switches are supported on c7000 enclosures with the following SKUs:

A pair of PDUs must be ordered for AC feed redundancy.

+ 34 hidden pages