HPE 644161-B22, 649281-B21 Getting Started Guide

QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-Class

Overview

Page 1
HPE InfiniBand Options for HPE BladeSystems c-Class
Hewlett Packard Enterprise supports 56 Gbps Fourteen Data Rate (FDR) and 40Gbps Quad Data Rate (QDR) InfiniBand (IB) products that include mezzanine Host Channel Adapters (HCA) for server blades, dual mode InfiniBand or Ethernet mezzanine adaptors, switch blades for c
focuses on mezzanine adaptors for server blades, and InfiniBand switch blades for c switches, standup PCI Express HCAs and FlexLOM Adap
servers, as well as InfiniBand cables, please refer to the at:
The following InfiniBand products based on Mellanox technology are available for the
The 544+M Mezzanine adapters Mezzanine adapters utilize the PCI Express 3.0 x8 interface. The 544+M Mezzanine adapters are dual function adapters that are capable of support (a mix mode of one InfiniBand port and one Ethernet port is not supported on 544+M Mezzanine adapters). The 544+M Mezzanine adapter are supported on
The 545M Mezzanine Adapter for utilizes and low with a
NOTE:
InfiniBand host stack software (driver) is required to run on servers connected to the InfiniBand network. For mezzanine HCAs based on Mellanox technologies, Mellanox WinOF on Microsoft Windows.
For the latest information on Mellanox OFED software, please refer to:
The enclosure. It is based on the Mellanox Switch X technology. The FDR IB switch blade has 16 downlink ports to connect up to 16 server blades in the c7000 enclosure, and 18 QSFP uplink ports for inter capable of supporting 56Gbps (FDR) bandwidth. A subnet manager has to be provided; see the paragraph on subnet managers for more details.
The Platinum enclosure. It is based on the Mellanox Switch X technology. The FDR IB switch blade has 16 downlink ports to connect to 16 server blades in the c7000 enclosure, and 18 QSFP uplink ports for inter ports are capable of supporting 56Gbps (FDR) bandwidth. The switch contains an integrated management module that is capable of managing a cluster of up to 648 nodes. links. The most commonly deployed fabric topology is a fat tree or its variations. A subnet manager is required to manage and control an InfiniBand fabric. The subnet manager functionality can be provided by either t rack-mount InfiniBand switch with an embedded fabric manager (aka internally managed switch) or host-based subnet manager
-Class enclosures, and rack switches and cables for building scale-out solutions. This QuickSpecs
-Class enclosures; for details on the InfiniBand rack
tors for HPE ProLiant and Apollo
HPE InfiniBand for HPE ProLiant and Apollo servers QuickSpecs
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154440
HPE BladeSystem c-Class from HPE:
HPE InfiniBand FDR/EN 10/40Gb 2-Port 544+M Adapter for HPE BladeSystem c-Class (Gen 9)
HPE InfiniBand QDR/EN 10Gb 2-Port 544+M Adapter for HPE BladeSystem c-Class (Gen 9)
HPE InfiniBand FDR 2-Port 545M Adapter for HPE BladeSystem c-Class (Gen8 and Gen9)
HPE BLc FDR IB Managed Switch for HPE BladeSystem c-Class
HPE BLc FDR IB Switch for HPE BladeSystem c-Class
for HPE BladeSystem c-Class are based on the Mellanox ConnectX-3 Pro technology. The 544+M
dual InfiniBand ports or dual Ethernet ports when connected to supported Ethernet switches in c7000 enclosure
HPE BladeSystem c-Class Gen 9 blade servers.
the PCI Express 3.0 x16 interface. Two ports provide more than 100Gb/s of throughput in dual port FDR InfiniBand mode
latency for performance-driven server and storage clustering applications. Additional application acceleration is achieved
n improvement in message rate compared with previous generations of QDR InfiniBand cards.
The 544+M and 545M Mezzanine Adapters are only supported in the HPE BLc7000 Platinum Enclosures.
Hewlett Packard Enterprise supports Mellanox OFED Driver on Linux 64-bit operating systems, and
http://www.mellanox.com/content/pages.php?pg=software_overview_ib&menu_section=34.
HPE BLc FDR IB Switch for HPE BladeSystem c-Class is a double wide switch for the HPE BladeSystem c7000 Platinum
HPE BLc FDR Managed IB Switch for HPE BladeSystem c-Class is a double wide switch for the HPE BladeSystem c7000
HPE BladeSystem c-Class is based on the Mellanox Connect-IB technology. The 545M adapter
-switch links or to connect to external servers. All ports are
-switch links or to connect to external servers. All
An InfiniBand fabric consists of one or more InfiniBand switches connected via inter-switch
he HPE BLc FDR Managed IB Switch or a
up
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class
Overview
Page 2
software on a server connected to the fabric. OpenSM is a host-based subnet manager that runs on a server connected to the InfiniBand fabric. Mellanox OFED software stack includes OpenSM for Linux, and Mellanox WinOF includes OpenSM for Windows. For comprehensive management and monitoring capabilities, Mellanox Unified Fabric Manager managing the InfiniBand fabric based on Mellanox/ InfiniBand switch products and Mellanox based mezzanine HCA.
An embedded fabric manager is available on Mellanox internally managed 36
. Please refer to: mount
HP from 1M to 7M for HCA to switch, or inter for HCA to switch, or inter switch, or inter
Please refer to: InfiniBand cables.
What's New
PCI Express 3.0 x8
™ Advanced (UFM) is recommended for
-port FDR switch, and modular FDR and QDR switches
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154440 for information about InfiniBand rack
switches.
E supports InfiniBand copper and fiber optic cables with QSFP to QSFP connectors. The QSFP to QSFP QDR copper cables range
-switch links at QDR speed. The QSFP to QSFP FDR copper cables range from 0.5M to 3M
-switch links at FDR speed. The QSFP to QSFP FDR optical cables range from 3M to 30M for HCA to
-switch links at FDR speed.
https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04154440 for more details on supported
HPE InfiniBand FDR/EN 10/40Gb 2-Port 544+M Mezzanine Adapter for HPE BladeSystem c-Class
Mellanox Dual Function ConnectX-3 Pro technology
Dual port FDR InfiniBand or 10/40G Ethernet
PCI Express 3.0 x8
HPE InfiniBand QDR/EN 10Gb 2-Port 544+M Mezzanine Adapter for HPE BladeSystem c-Class
Mellanox Dual Function ConnectX-3 Pro technology
Dual port QDR InfiniBand or 10Gb Ethernet
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class

Models

3
Mellanox CX-3 Pro Dual Function Mezzanine Adapters
HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter
764282-B21
HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter
764283-B21
NOTE: Supported on - HPE ProLiant BL460c Gen 9 NOTE:
enclosure part numbers 507014 B21 must be installed in mezz slot 1. Not For firmware release notes of visit For firmware release notes of visit
Mellanox Connect InfiniBand Mezzanine Adapter
HPE InfiniBand FDR 2-port 545M Adapter
702213-B21
NOTE: Supported on - HPE ProLiant BL460c Gen 8 & Gen 9, HPE ProLiant BL465c Gen 8, HPE ProLiant BL660c Gen 8 &
NOTE:
enclosure part numbers 507014 B21 must be installed in mezz slot 1. Not suppo For firmware release notes of HPE InfiniBand FDR 2
support website
Mellanox Software License
Mellanox Unified Fabric Manager Advanced 1yr 24x7 Updates and Technical Support Flex License
BD571A
Mellanox Unified Fabric Manager Advanced 3yr 24x7 Updates and Technical Support Flex License
BD572A
Mellanox IB switch blades and options
HPE 4X FDR InfiniBand Switch Module for c-Class BladeSystem
648312-B21
NOTE: The HPE BLc FDR IB Switches are only supported on the HPE BladeSystem c7000 Enclosures P/N's: 681840 507016
NOTE:
at: https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04229580 (Worldwide)
Designed for use with HPE BLc7000 Platinum Enclosures. If used with HPE BLc7000
the support website then select your operating system.
the support website then select your operating system.
-B21, 507015-B21, 507016-B21, 507017-B21 and 507019­supported on earlier enclosures.
HPE InfiniBand QDR/ED 10Gb 2-Port 544+M Adapter, please
HPE InfiniBand FDR/EN 10/40Gb 2-Port 544+N Adapter, please
-IB
Gen 9, HPE ProLiant WS460c Gen 8 & Gen 9
Designed for use with HPE BLc7000 Platinum Enclosures. If used with HPE BLc7000
-B21, 507015-B21, 507016-B21, 507017-B21 and 507019-
rted on earlier enclosures.
-Port 545M Adapter, please visit the
then select your operating system.
-B21, 681842-B21, 681844-B21, 507014-B21, 507015-B21,
-B21, 507017-B21 and 507019-B21.
Please see the HPE BladeSystem c7000 Enclosure QuickSpecs for additional information
Page
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class

Standard Features

4
Product Features
InfiniBand mezzanine HCAs based on Mellanox Connect-3 Pro technology for Gen 9 blades
contains a management module and can run the
Performance
Bandwidth Scalability and
Standards support:
HPE InfiniBand QDR/EN 10Gb 2-Port 544+M Adapter (764282-B21)
Mellanox ConnectX-3 Pro technology PCI Express 3.0 x8 Dual-port QDR InfiniBand Dual-port 10 Gb Ethernet
HPE InfiniBand FDR/EN 10/40Gb 2-Port 544+M Adapter (764283-B21)
Mellanox ConnectX-3 Pro technology PCI Express 3.0 x8 Dual port FDR InfiniBand in HPE BLc7000 Platinum Enclosures Dual-port QDR InfiniBand Dual-port 40 Gb Ethernet Dual-port 10 Gb Ethernet
Support Mellanox OFED Linux driver stack and Microsoft Windows Server
For firmware release notes, please visit the support website for part number 764282-B21
and the support website for part number 764283-B21, then select your operating system.
InfiniBand mezzanine HCAs based on Mellanox Connect-IB technology for Gen 8 & Gen 9 blades
InfiniBand switch blades based on Mellanox technology
HPE InfiniBand FDR 2-Port 545M Adapter (702213-B21)
Mellanox Connect-IB technology Dual port FDR InfiniBand PCI Express 3.0 x16 interface for increased throughput Improved message rate Designed for use with HPE BLc7000 Platinum enclosures
Support Mellanox OFED Linux driver stack r
For firmware release notes, please visit the support website system.
HPE BLc FDR IB Switch for HPE BladeSystem c-Class
Double wide switch blade for the Platinum c7000 enclosure with 16 downlink ports
to connect server blades via the midplane, and 18 QSFP unlink ports for the inter­switch links or to connect to external servers. All ports are capable of supporting 56Gbps (FDR) bandwidth. All uplink ports support copper and fiber optic cables. One version of the switch (648312-B21) is externally managed, i.e. a subnet manager has to be provided on the fabric (see the subnet manager discussion above). The other version of the switch (648311-B21) subnet manager.
then select your operating
Reliability
:
All ports on FDR HCA cards and switch are capable of supporting 56Gbps signaling rate, with a peak
data rate of 52 Gbps in each direction.
All ports on QDR HCA card and switch are capable of supporting 40Gbps signaling rate, with a peak
data rate of 32 Gbps in each direction.
The 544+M Mezzanine Adapters: PCI Express revision 3.0 x8 compliant
The 545M Mezzanine Adapter: PCI Express revision 3.0x16 compliant
IBTA version 1.2 compatible
Page
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class
Standard Features
Page 5
Operating
The 544+M series devices configured as IB only mode, or Ethernet only mode are supported on MLNX_OFED
WinOF 5.10 on
0) are
Interconnect Bays
HPE IB switch blades are designed to fit into the double wide switch bays on the c-Class enclosures. Depending
InfiniBand Fabric
Auto-negotiation/self-discovery:
systems support
3.1-1.0.3 on the following Linux operating systems:
RHEL: 6.5; 6.6; 6.7; 7.0; 7.1
CentOS: 6.5; 6.6; 6.7; 7.0; 7.1
SLES: 11 SP1; SP2; SP3; SP4; 12
OEL: 6.3; 6.4; 6.5; 6.6; 6.7; 7.0; 7.1
Ubuntu: 12.04; 14.04; 14.10; 15.04
The 544+M series devices configured as IB only mode or Ethernet only mode are supported on the following Windows operating systems:
Windows Server 2012 R2 (x64 only)
Windows Server 2012 (x64 only)
Windows Server 2008 R2 (x64 only)
The 544+M series devices configured as Ethernet only mode (with VMware 4.15.2.0 or VMware 1.9.10­also supported in the following virtualized environments:
ESXI 6.x
ESX 5.5
ESX 5.1
The 545M adapter is supported on MLNX_OFED 3.1-1.0.3 on the following Linux operating systems:
RHEL: 6.5; 6.6; 6.7; 7.0; 7.1
CentOS: 6.5; 6.6; 6.7; 7.0; 7.1
SLES: 11 SP1; SP2; SP3; SP4; 12
OEL: 6.3; 6.4; 6.5; 6.6; 6.7; 7.0; 7.1
Ubuntu: 12.04; 14.04; 14.10; 15.04
on c-Class enclosure
on the mezzanine connectors used for IB HCA mezzanine cards, the IB switch blade has to be inserted into corresponding interconnect bays.
The FDR switch may be installed in interconnect bays 3 and 4, 5 and 6, 7 and 8 in the HPE BLc7000
Platinum enclosure (P/N's: 681840-B21, 681842-B21, 681844-B21).
The FDR switch must be installed in interconnect bays 3 and 4 when used with enclosure P/N's:
507014 -B21, 507015-B21, 507016-B21, 507017-B21 and 507019-B21
Other enclosure part numbers do not support FDR switches.
At QDR speeds Interconnect bays 3 and or 5 and 6 or 7 and 8 can be used when installed in the HPE
BladeSystem c7000 Enclosures P/N's: 681840-B21, 681842-B21, 681844-B21, 507014 -B21, 507015-B21, 507016-B21, 507017-B21 and 507019-B21.
Management
InfiniBand FDR or QDR ports support auto-negotiation down to lower frequencies. For example, external uplink ports of a FDR switch blade will negotiate down to QDR or DDR speed if they are connected to a device which can only operate at those speeds.
Self-discovery is supported by subnet manager.
Management Support: Mellanox OFED includes drivers and utilities to configure and manage the HCA in a Linux environment and Mellanox WinOF includes drivers and utilities to configure and manage the HCA in the Microsoft Windows environment.
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class
Standard Features
Page 6
InfiniBand fabric has to be set up with a subnet manager: see the subnet manager discussion above.
Warranty
Hewlett Packard Enterprise branded hardware options qualified for BladeSystem c-Class and p-Class servers
service agreements.
are covered by a global limited warranty and supported by HPE Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners. The Hewlett Packard Enterprise branded hardware option diagnostic support and repair is available for one year from date of purchase, or the length of the server they are attached to, whichever is greater. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HPE Pointnext operational services or customized
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class

Service and Support

7
Service and
HPE Technology Services
HPE infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with
When you buy Pointnext operational services designed to meet your IT and busine HPE standard servers business needs. If you are running business critical environments, Care. These services help you deliver high levels of a management and advanced technical response. Here is the support service recommendation from the Foundation Care and Proactive Care portfolio. For customized support service solution, for your unique support requirements using broader services portfolio of Foundation Care and Proactive Care.
Recommended
Recommended HPE Pointnext operational services for optimal satisfaction with your HPE product
Hewlett Packard Enterprise recommends components to prevent problems with proactive advice and assistance, resolve issues and rapidly recover by connecting to
HPE
Provides for the basic hardware installation of
servers, storage devices and networking options to ass manner.
Related Services
HPE Proactive Select Service
Provides a flexible way to purchase Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12 months.
Parts and
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or elig by Hewlett Packard Enterprise due to malfunction.
Support
Services
Technology Services offers you consultants and support experts to solve your most complex
HPE Pointnext operational services
HPE Options, it's also a good time to think about what level of service you may need. HPE
provide total care and support expertise with committed response choices
ss need.
Foundation Care services deliver scalable support-packages for Hewlett Packard Enterprise industry-
and software. You can choose the type and level of service that is most suitable for your
Hewlett Packard Enterprise offers Proactive
pplication availability through proactive service
Hewlett Packard Enterprise can work with you to tailor a service solution
Proactive Care for your BladeSystem servers, enclosures and
The Hewlett Packard Enterprise enhanced call experience and advanced technical expertise
ProLiant Server Hardware Installation
Hewlett Packard Enterprise branded
ist you in bringing your new hardware into operation in a timely and professional
https://h20195.www2.hpe.com/v2/getpdf.aspx/5981-9356EN.pdf
HPE best-in-class consultancy and technical services. You can buy
https://h20195.www2.hpe.com/v2/getpdf.aspx/4AA2-3842ENW.pdf
Materials
forth in the manufacturer's operating manual, product quick-specs, or the technical product
ible SSD/Flash Drives replaced
Page
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class

Related Options

8
Cabling Options
FDR Cables
HPE 0.5M FDR Quad Small Form Factor Pluggable InfiniBand Copper Cable
670759-B21
HPE 1M FDR Quad Small Form Factor Pluggable InfiniBand Copper Cable
670759-B22
HPE 1.5M FDR Quad Small Form Factor Pluggable InfiniBand Copper Cable
670759-B23
HPE 2M FDR Quad Small Form Factor Pluggable InfiniBand Copper Cable
670759-B24
HPE 3M FDR Quad Small Form Factor Pluggable InfiniBand Copper Cable
670759-B25
HPE 3 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B21
HPE 5 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B22
HPE 7 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B23
HPE 10 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B24
HPE 12 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B25
HPE 15 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B26
HPE 20 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B27
HPE 30 Meter InfiniBand FDR QSFP V-series Optical Cable
808722-B28
HPE Ethernet
Modules
HPE 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
538113-B21
Mellanox SX1018HP Ethernet Switch for c
Interconnect
-Class BladeSystem 689638-B21
Page
QuickSpecs
Class

Technical Specifications

9
Compliance
Mezzanine:
HPE 544+M, 545M, PCI Express 3.0, ROHS-R6
Switches:
IBTA version 1.2 compatible
ROHS-R6
General
Communications Processor
Mezzanine:
The 544+M: Mellanox ConnectX-3 Pro HPE The 545M: Mellanox Connect-IB
FDR switch:
Mellanox Switch X
Dimensions (LxW)
Mezzanine HCA:
HPE Type A 3.5 x 3.9 in
Power and
Operating
Temperature
Mezzanine HCA:
32º to 131º F (0º to 55º C)
Switch module:
32º to 104º F (0º to 40º C)
Humidity
Mezzanine HCA:
5% to 85%
Switch module:
5% to 85%
Power requirement
Mezzanine HCAs:
HPE InfiniBand QDR/EN 10Gb 2-Port 544+M Adapter:
: typical 12.5,
max 14.7W
Switch blades:
FDR switch: 150W @ 12V
Emissions Classifications
HCA and Switches:
FCC CFR 47 Part 15 Class A
ACA CISPR 22 Class A
Switches:
MIC Korea "EMC Registration Regulation" Class A
Specifications
HPE InfiniBand Options for HPE BladeSystems c-
Environmental Specifications
(non-condensing)
typical 7.2W, max 9.2W HPE InfiniBand FDR/EN 10/40Gb 2-Port 544+M Adapter: typical 8.3W, max 11.0W HPE InfiniBand FDR 2-Port 545M Adapter
CISPR 22 Class A ICES-003 Class A VCCI Class A
Page
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class
Summary of
10
Date
Version History
Action
Description of Change
07-May-2018
Version 29
Changed
Overview, Models, Standard Features, Service and Support, and Related Options sections were updated.
Removed
OBS SKU was deleted: 648311-B21
23-Oct-2017
Version 28
Changed
Care Pack naming and Service and Support- Parts and Materials updated.
06-Mar-2017
Version 27
Changed
Overview, Models, Standard Features, and Technical Specifications sections were updated.
Removed
Obsolete SKUs were deleted:
670760-B26, 670760-B27, 670760-B28, 516733-B21.
19-Feb-2016
Version 26
Changed
Overview, Models, Standard Features, Related Options, and Technical Specifications sections were updated.
Added
SKUs added in Models and Related Options sections:
808722-B28.
Removed
Obsolete SKUs were deleted:
B27, 498386-B28, 438030-B21.
18-Apr-2014
Version 25
Changed
Changes made in Service and Support section.
20-Feb-2014
Version 24
Changed
Changes were made to correct the North America version.
18-Feb-2014
Version 23
Changed
Changes were made in Overview, Models and Related Options sections.
10-May-2013
Version 22 Removed
Models: Removed TE078A and 590643-B21 from the section. Related Options: Removed Meltanox Software Licenses section.
Added
Models: Added BD569A, BD570A, BD571A and BD572A
14-Dec-2012
Version 21 Removed
Removed At A Glance
Added
Added the Product Features section.
13-Aug-2012
Version 20
Changed
Changes were made in Overview, Models and Related Options sections.
06-Mar-2012
Version 19
Changed
Changes were made throughout the QuickSpecs.
22-Jun-2011
Version 18
Removed
HPE DDR IB Dual-port Mezzanine HCA for BladeSystem c-Class and mentions of StorageWorks were removed.
22-Apr-2011
Version 17
Changed
Operating systems support was completely revised
was added to Mellanox InfiniBand mezzanine HCA cards and options
05-Apr-2011
Version 16
Changed
Part number for QLogic InfiniBand Fabric Suite Fabric Flexible License was revised in QLogic IB switch blade and options.
05-Oct-2010
Version 15
Changed
Performance, Scalability and Reliability and InfiniBand Fabric
Service and Support was added
Changes
644160-B21, 644161-B22, 489184-B21, 505959-B21, 670760­B21, 670760-B22, 670760-B23, 670760-B24, 670760-B25, 670760-B26, 670760-B27, 670760-B28, 516733-B21, QL470A. SKUs for DDR/QDR Cables removed per no longer supported: 644160-B21, 644161-B22, 489184-B21, 505959-B21, 670760­B21, 670760-B22, 670760-B23, 670760-B24, 670760-B25,
764282-B21, 764283-B21, 808722-B21, 808722-B22, 808722­B23, 808722-B24, 808722-B25, 808722-B26, 808722-B27,
BD570A, BD569A, BD573A, BD574A, 583210-B21, 505958-B21, 498386-B23, 498386-B24, 498386-B25, 498386-B26, 498386-
Notes were added to the Introduction Mellanox Fabric IT Fabric Manager Per Node Right To Use License
Management were combined into Standard Features and Warranty was added
Page
QuickSpecs
HPE InfiniBand Options for HPE BladeSystems c-
Class
Summary of Changes
Page 11
21-May-2010
Version 14
Removed
Mellanox Fabric IT Mgr Per Node RTU and Voltaire Unified Fabric Mgr
options.
22-Jan-2010
Version 13
Changed
HPE BLc 4X QDR IB Switch for HPE BladeSystem c-Class was revised in the Models section.
16-Nov-2009
Version 12
Changed
Changes were made throughout the QuickSpecs.
18-Sep-2009
Version 11
Changed
Changes were made throughout the QuickSpecs.
05-Jun-2009
Version 10
Changed
Changes made within the Overview section and the description for Model 450717-B21 was changed.
03-Apr-2009
Version 9
Changed
The QuickSpecs was completely rewritten.
adding new model numbers 489183-B21 and 410398-B21.
02-May-2008
Version 7
Changed
Changes were made within the QuickSpecs including, updating
GridVision BladeFM to the Models section.
14-Nov-2007
Version 6
Changed
This QuickSpecs was completely revised.
20-Jul-2007
Version 5
Changed
Temperature information was corrected in the Technical
temperatures instead of the degree symbol.
11-May-2007
Version 4
Changed
Changes made throughout the QuickSpecs except for the
sections.
03-Nov-2006
Version 3
Changed
Changed "c-Class BladeSystems" to "BladeSystems c-Class" throughout the QuickSpecs. NOTE that the title has also changed.
29-Sep-2006
Version 2
Changed
In the MODELS section, made changes to 410533-B21, 409377-B21 and 410398-B21.
25-Sep-2006
Version 1
Created
New QuickSpecs
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such pr Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Windows and Microsoft are registered trademarks
c04126044
Per Node RTU were removed from Mellanox IB Switch blades and
15-Sep-2008 Version 8 Changed Changes were made throughout the entire QuickSpecs including
Management Support in the InfiniBand Fabric Management section and adding What's New to the Overview section and Voltaire
Specifications section. A 0 had mistakenly been added at the end of all
Performance, Additional Features and Technical Specifications
- 12586 - Worldwide - V29 - 7-May-2018
oducts and services.
of Microsoft Corp., in the U.S.
Loading...