QuickSpecs
HPE Apollo Platform Manager
Overview
Page 1
HPE Apollo Platform Manager
The HPE Apollo Platform Manager(APM) is a rack level power and system management solution for the HPE Apollo 6000 System,
HPE
system.
HPE
aggregate
dynamic power capping
A
HPE
ed serial concentrator, up to 11 local user accounts,
a
What’s New
• Can monitor health of all servers in the rack while providing an “at a glance” view
Front View:
1.
Consolidated Management Ports 1 - 10 (RDM1)
2.
Power LED
3.
Serial port for management of top of rack switch
4.
RDM 3 port for SL-APM Distribution module
5.
RDM 2 port for SL-APM Distribution module
6. iLO port
7.
UID LED
8.
Health LED
9. Reset Button
10.
Ethernet Management port
Apollo 4500 System, HPE Apollo 2000 System, and HPE Moonshot 1500 System. HPE APM is standard in the Apollo 8000
APM will automatically discover hardware components and enable bay level power on and off, server metering, and
. HPE APM consolidates Ethernet access to all resident iLOs, and provides a secure single sign on. HPE
PM also provides asset management capabilities for shared infrastructure.
APM features rack level event logging, RADIUS authentication, an integrat
read only service port, and supports SNMP, SSH, Syslogd, telnet.
• Dynamic Rack Power capping
• Unified Ethernet access to all resident iLOs with single sign on capability
• Ability to link multiple APMs together for a “row view” of APM based racks
• Enhanced graphical interface
• RESTful API support
QuickSpecs
HPE Apollo Platform Manager
Overview
Page 2
11.
Service port
12.
Serial Console port
13.
MicroSD Card slot
14.
Power Distribution Module (PDM) ports 1 – 6
Back View/Side View
1. Power plugs 1 and 2
2.
On-Generator and AUX signals
3.
Redundant reset
QuickSpecs
HPE Apollo Platform Manager
Optional Features
Page 3
Warranty
This product is covered by a global limited warranty and supported by HPE Services and a worldwide
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Factory Express
Portfolio for Servers and
HPE Factory Express offers configuration, customization, integration and deployment services for
http://www.hp.com/go/factory-express
Storage
network of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support and
repair is available for one year from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are available through HPE
Pointnext operational services or customized service agreements.
NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next
business day response. Additional information regarding worldwide limited warranty and technical
support is available at:
Hewlett Packard Enterprise servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. Hewlett Packard Enterprise products supported through Factory
Express include a wide array of servers and storage and configurable network switches.
For more information on Factory Express services for your specific server model please contact your
sales representative or go to:
.
QuickSpecs
HPE Apollo Platform Manager
Service and Support
Page 4
Service and Support
Support for HPE Apollo Platform Manager is covered by the support for the server installed in
choices designed to meet your IT and business need.
Recommended HPE Pointnext operational services for optimal satisfaction with your HPE
product
Recommended Services
Support for the HPE APM is provided by the servers installed in the rack. Consider the criticality of the
servers and choose the recommended service level that meets your needs.
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
For more information
To learn more on services for your HPE server, contact your Hewlett Packard Enterprise sales
http://www.hp.com/go/scalable
the same rack.
HPE Technology Services
HPE Technology Services offers you consultants and support experts to solve your most complex
infrastructure problems. We help keep your business running, boost availability and avoid downtime.
Protect your business beyond warranty with HPE Pointnext operational services
When you buy HPE Options, it's also a good time to think about what level of service you may need.
HPE Pointnext operational services provide total care and support expertise with committed response
maintain the covered hardware product in operating condition, including parts and materials for
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
representative or authorized channel partner Or visit:
QuickSpecs
HPE Apollo Platform Manager
Configuration Information
Page 5
NOTE: Contact your local sales representative for information on configurable product offerings and requirements.
Configuration Example 1
Appropriate for server chassis with consolidated management port such as HPE Apollo systems.
HPE Apollo Platform
HPE Advanced Power Manager Kit
741192-B21
HP 4M 20 Pin Consolidated Management Cable
762048-B21
HP 3M MicroDB9 to MicroDB9 Cable
762049-B21
Configuration Example 2
Appropriate for rack configurations with greater than 10 chassis such as Apollo 2000.
HPE Apollo Platform
HPE Advanced Power Manager Kit
741192-B21
HPE SL Advanced Power Manager Distribution Module Kit
620002-B21
Manager
Manager
NOTE:NOTE: Each HPE APM can connect up to 10 server chassis via consolidated
management cable.
NOTE:NOTE: 1 cable per server chassis.
NOTE:NOTE: This cable is required for connectivity to DC Power shelf with Apollo
6000.
NOTE:NOTE: Each HPE APM can connect to 2 HPE SL Advanced Power Manager
Distribution (SL APMD) modules.
NOTE:NOTE: Each SL APMD can connect up to 10 chassis.
QuickSpecs
HPE Apollo Platform Manager
Technical Specifications
Page 6
System Unit
Chassis Dimensions
(H x W x D)
1.625" x 8.25" x 13" (4.128 x 20.95 x 33.02cm)
Weight
(approximate)
9 lbs
Input Requirements
Rated Line Voltage
100 to 240 VAC
Rated Input Current
1.0A at 115VAC
1.0A at 230VAC
Rated Input Frequency
50 to 60 Hz
Rated Input Power
12W (at 100 VAC),
12W (at 200 VAC)
Power Specifications
To review typical system power ratings use the HPE Power Advisor which is
URI=1439951
653.10W (at 100 VAC),
System Inlet
Operating
50° to 140° F (10° to 60° C) at sea level with an
altitude derating of 1.8°F per every 1000 ft
(1.0°C per every 305 m) above sea level to a
maximum of 10,000 ft (3050 m), no direct
sustained sunlight. Maximum rate of change is
18°F/hr (10°C/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be r
operating with a fan fault or above 86°F (30°C).
Non-operating
-22° to 185° F (-30° to 85° C)
Maximum rate of change is 36°F/hr (20°C/hr).
Relative Humidity
Operating
10% to 90% relative humidity (Rh), 82.4°F
(28°C) maximum
condensing.
Non-operating
5% to 95% relative humidity (Rh), 101.7°F
(38.7°C) maximum wet bulb temperature, non
condensing.
Altitude
Operating
10,000 ft (3050 m). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is 1500
ft/min (457 m/min).
Non-operating
30,000 ft (9144 m). Maximum allowable altitude
change rate is 1500 ft/min (457 m/min).
Emissions Classification
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47, Pt
15; ICES
EN 61000
IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
statements.
(per power supply)
Temperature
available via the online tool located at
http://www8.hp.com/us/en/products/servers/solutions.html?comp
URL:
653.08W (at 200 VAC)
educed if
(non-condensing)
(EMC)
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
wet bulb temperature, non-
-
-003; CNS13438; GB9254; K22;K24;
-3-2; EN 61000-3-3; EN 60950-1;
QuickSpecs
HPE Apollo Platform Manager
Technical Specifications
7
Environment-friendly
End-of-life Management
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and
Packard Enterprise equipment.
Products and Approach
and Recycling
recycling programs in many geographic areas. For trade-in information,
please go to:
http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest
Hewlett Packard Enterprise sales office. Products returned to Hewlett
Packard Enterprise will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise web site at:
http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment
facilities as well as HPE OEM customers who integrate and re-sell Hewlett
Page
QuickSpecs
HPE Apollo Platform Manager
Summary of Changes
Page 8
Date
Version History
Action
Description of Change
23-Oct-2017
Version 9
Changed
Care Pack naming and Service and Support- Parts and
Materials updated.
2-Sep-2016
From version 7 to 8
Updated
Update name of the QuickSpecs and general information
throughout the document
1-Dec-2014
From version 6 to 7
Changed
Updates throughout the QuickSpecs
10-Jun-2014
From Version 5 to 6
Changed
Changes were made throughout, including changing the
title.
18-Apr-2014
From Version 4 to 5
Changed
Recommended and Related Services were revised.
17-May-2013
From Version 3 to 4
Changed
Correction made to the North America and Canada
versions only.
10-May-2013
From Version 2 to 3
Changed
Overview: Updated Image section.
Updated Step 1.
05-Jun-2012
From Version 1 to 2
Changed
Changed the title.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such pro
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omissions contained herein.
c04111481
Configuration Information-Factory Integrated Models:
- 14189 - Worldwide - V9 - 23-October-2017
ducts and services.
Loading...