HPE 500172-B21 Getting Started Guide
QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 1
HPE Common Slot Power Supplies
HPE Common Slot (CS) Power Supplies share a common electrical and physical design that allows for hot-swap, tool-less
installation into
options available in multiple input and output options, allowing users to "right
configurations and environments. This flexibility helps to minimize power waste, lower overall energ
power capacity in the data center.
High efficiency options rated for up to 94% (Platinum/Platinum Plus) and up to 96% (Titanium) power efficiency are available
the Common Slot form factor. Most options also support
(PLC) technology. This feature enables each server to communicate identification, location, and power
Intelligent Power Distribution Unit in the rack which can then be shared wi
efficiency in the data center.
HPE Common Slot Platinum Plus Power Supplies
1.
Power Supply Identification Label
4.
Blue C-13 Power Connector (indicates support for HPE Power
Discovery Services)
2. Power LED
5. Power Line Communication Port (requires PLC power cable
for use)
3. Front-Side Revision Control Label
6. Quick-Release Lever
HPE server and storage solutions. The Hewlett Packard Enterprise CS power supplies offer high-efficiency power
-size" a power supply for specific server/storage
y costs, and avoid "trapped"
in
HPE Power Discovery Services via embedded power line communication
-related data to the
th HPE Insight Control to manage power usage and
QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 2
HPE 750W Common Slot -48VDC Power Supply
1. Power Supply Identification Label
5. Power LED
2.
Front-Side Revision Control Label
6.
Quick-Release Lever
3.
Power Input Connector
7.
Power Grounding Connector
4. Power Return Connector
What's New
• New 1500W -48VDC 94% efficient Common Slot power supply options with Phoenix connectors (no support for HPE
Models
HPE Power Supplies
NOTE:
supplies must be of the same output and efficiency rating. If non-matched power
supplies are inserted you will get error
HPE
NOTE:
(blue plug).
HP 750W Common Slot Titanium Hot Plug Power Supply Kit
697581-B21
HPE Common Slot Platinum Plus Power Supply Kits
NOTE:
(blue plug).
HPE 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
656362-B21
HPE 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
656363-B21
HPE 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
656364-B21
HPE 1500W Common Slot Platinum Plus Power Supply Kit
684532-B21
HPE Common Slot Platinum Power Supplies
NOTE:
(black plug).
HPE 460W Common Slot Platinum Hot Plug Power Supply Kit
739252-B21
HPE 750W Common Slot Platinum Hot Plug Power Supply Kit
739254-B21
Power Discovery Services).
Mixing of power supplies in the same server is not supported. All power
s and operation will fail.
Common Slot Titanium Power Supply Kits
Up to 96% efficiency with support for HPE Power Discovery Services
Up to 94% efficiency with support for HPE Power Discovery Services
Up to 94% efficiency with no support for HPE Power Discovery Services
QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 3
HPE 1200W Common Slot Platinum Hot Plug Power Supply Kit
748287-B21
HPE
NOTE:
(blue plug).
HPE 1200W Common Slot Platinum Hot Plug Power Supply Kit
578322-B21
HPE
NOTE:
HPE 460W Common Slot Gold Hot Plug Power Supply Kit
503296-B21
HPE 750W Common Slot Gold Hot Plug Power Supply Kit
512327-B21
HPE
NOTE: Up to 89% efficiency
HP 1200W Common Slot Silver Hot Plug Power Supply Kit
500172-B21
HPE
HPE 1500W Common Slot 48VDC Hot Plug Power Supply Kit
746708-B21
HPE 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE:NOTE: The 750W Common Slot
includ
review the "Related Options" section of this document.
636673-B21
HPE
NOTE: Up to 94% efficiency.
HP 500W Common Slot 277VAC Hot Plug Power Supply Kit
717362-B21
HP 750W Common Slot 277VAC Hot Plug Power Supply Kit
717364-B21
HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE:
include a power cord. To select an appropri
please review the "Related Options" section of this document.
717359-B21
HPE
NOTE:
HP 1200W Common Slot 380VDC Hot Plug Power Supply Kit
NOTE:
include a power cord. To select an appropriate power cord for your server,
please review the "Related Options" section of this document.
684539-B21
Common Slot Platinum Power Supplies
Up to 94% efficiency with support for HPE Power Discovery Services
Common Slot Gold Power Supplies
Up to 92% efficiency.
Common Slot Silver Power Supplies
Common Slot -48VDC Power Supplies
-48VDC Hot Plug Power Supply Kit does not
e a power cord. To select an appropriate power cord for your server, please
Common Slot 277VAC Power Supplies
The HPE Common Slot 277VAC Hot Plug Power Supply Kits do not
ate power cord for your server,
Common Slot 380VDC Power Supplies
Up to 94% efficiency.
The 1200W Common Slot 380VDC Hot Plug Power Supply Kit does not
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 4
Common Slot Features
and Benefits
Common Slot Design
Multiple Output and Input
Power Management for Redundant Power Configurations
Titanium and
Platinum/Platinum Plus
Features and Benefits
Highest Rated Power Efficiency
Supports
80Plus Certification
The 80PLUS test protocol was developed jointly by Ecos Plug Load Solutions and the Electric Power
Research Institute (EPRI) in 2003, with the program being formally launched in 2004.
The 80 PLUS performance specification requires power supplies in servers to be 80% or greater energy
efficient at 20%, 50% and 100% of rated load with a true power factor of 0.9 or greater. This makes an
80 PLUS certified power supply substantially more efficient than typical p
other electrical devices.
• Tool-less hot-swap design allows for quick and easy access to power supplies
• Wide range of compatibility across HPE server and storage solutions minimizes the cost and
management effort to maintain different sets of power supply spares
Options
• Multiple output options allowing users to "right-size" their power needs and avoid "trapped"
power capacity in their data centers caused by over-subscribing power needs
• Both AC and DC power input options available providing flexibility to operate in different IT
environments
• Most Common Slot AC power supply options support both low-line and high-line voltage
inputs providing additional flexibility to operate in multiple It environments
• Supports multiple operating modes to maximize power efficiency when configuring servers
and storage with redundant power supplies
• Load-Balancing mode designed to maximize power efficiency at higher power supply
utilization loads
• High-Efficiency mode designed to maximize power efficiency at lower power supply utilization
loads
• Titanium (96%) and Platinum (94%) power efficiency certification from 80Plus program -
highest certifications available in the IT industry
• Minimize data center operating costs related to power by reducing power waste and
requirements for HPE server and storage solutions
the Hewlett Packard Enterprise Power Discovery Services (on most options)
• Creates energy-aware network through embedded power line communication feature in
Platinum power options
• Communicates power-related data to both iPDU and HPE Insight Manager
• Reduces human error, reclaims over-provisioned power capacity, and accurately
measures/monitors power usage
ower supplies found in many
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 5
Who benefits from the 80PLUS power supply program?
What are the efficiency requirements for each cert
80 PLUS Certification
230V Internal
% of Rated Load
20%
50%
100%
80 PLUS Bronze
81%
85%
81%
80 PLUS Silver
85%
89%
85%
80 PLUS Gold 88% 92% 88%
80 PLUS Platinum
90% 94% 91%
80 Plus Titanium*
94% 96% 91%
*The 80 PLUS Titanium specification also requires a minimum of 90% efficiency at 10% utilization.
What level of certification do
Hewlett Packard Enterprise offers
certification,
options meet 80PLUS requirements for Platinum certification. To review 80Plus certification reports for
each
.
NOTE:
80PLUS program; 277VAC, 48VDC, and 380VDC power supplies are tested by
E
Enabling Power
Discovery Services
HPE Power Discovery Services (PDS) combines the HPE Intelligent Power Distribution Unit (iPDU) and
HPE
an automated, energy
HPE
Which
How Is PDS enabled by the Common Slot Platinum/Platinum Plus Power Supply?
HPE
communication (PLC) feature that allows the power supply to communicate server data (such as server
name, UUID, and IP address) to an HPE Intelligent Power Distribution Unit (iPDU). This feature is
• Commercial/Residential Consumers - empowered with information regarding energy efficient
IT options that help them cut energy costs and reduce their environmental impact
• Utility/Power Providers - participation in a program that focuses on reducing power demands
on overburdened grids as well as reducing power waste and its associated environmental
impact
ification level?
HPE Common Slot (CS) Power Supplies meet?
a range of CS Power Supplies that meet various 80PLUS levels of
from Silver to Titanium. The Hewlett Packard Enterprise Platinum Plus power supply
HPE Common Slot Power Supply, please refer to the 80Plus website at: http://www.80plus.org/
Only AC CS Power Supplies operating at between 90V to 264V are tested/certified by the
nterprise for efficiency ratings.
Common Slot Platinum/Platinum Plus power supplies with HPE Insight Control software to create
-aware network between IT systems and facilities.
Power Discovery Services Features and Benefits :
• Captures highly accurate power data across racks and rows of servers in order to identify and
eliminate areas of waste
• Extends the life of the data center by reclaiming up to 3x energy capacity of the data center
• Ensures uptime by eliminating human error during power planning and provisioning
HPE Power Supplies Support IPD?
• HPE Common Slot Platinum Plus Power Supplies (including 460W, 750W, 1200W , and 1500W
options)
• HPE Common Slot Platinum Power Supplies (including 460W, 750W, and 1200W options)
Common Slot Platinum and Platinum Plus Power Supplies include an embedded power line
Hewlett Packard
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 6
supported on most HPE ProLiant G6 and G7 servers that support HPE Common Slot Platinum power
supplies, as well as on new
and Platinum Plus Power Supply options.
NOTE:
Intelligent Power Discovery. Please refer to the
power cord options and part numbers at:
http://h18004.www1.hp.com/products/
To learn more on
http://www.hp.com/go/ipd.
Support for Redundant
Power Sup
An HPE ProLiant server configured with an HPE Common Slot VAC Power Supply (460W, 750W,
1200W, or 1500W) supports the following three power scenarios:
A single Common Slot Power Supply supporting the entire load of the server can achieve the highest
efficiency when operating in the middle range (50%) of its capacity.
For redundant Common Slot Power Supplies
balanced mode (the default mode when
adding redundant power supplies), the load is shared equally between the two (or four) power supplies.
In general, the load
the primary power supply capacity.
When high
under System options -> Redundancy options), each power supply in the server is designated as either
a primary o
allows the primary power supply to operate at higher efficiency points on the load curve while the
secondary power supply operates in idle mode, providing no output
energy (typically two to four watts per supply). The user can also specify that odd or even power
supplies will be designated manually or automatically as secondary supplies. This flexibility allows users
to balance the loa
NOTE:
with redundant power supplies. However, neither model supports high
Compatibility
HPE Common Slot (CS) power supplies are compatible with a wide range HPE server and storage
solutions. To check for CS power supply compatibility with specific
ProLiant Options Compatibility Guide located at:
compatibility with specific
appropriate QuickSpecs for that product.
HPE ProLiant Generation 8 servers supporting HPE Common Slot Titanium
Standard power cables and jumpers do not support Power Line Communications or
HPE iPDU Data Sheet for more information on
QuickSpecs/DS_00193/DS_00193.pdf
HPE Intelligent Power Discovery, please visit the IPD website at:
plies
• Operating with a single supply
• Operating with redundant supplies in load-balanced mode
• Operating with redundant supplies in high-efficiency mode
operating in load-
-balanced mode offers better efficiency for loads requiring more than 60 percent of
-efficiency mode is enabled for redundant supplies (via the server's ROM-based setup utility
r secondary supply, and the entire server load is shifted to the primary power supply. This
d across a rack manually or automatically.
HPE Common Slot VDC Power Supply options support load-balancing when configured
power and consuming very little
-efficiency mode.
HPE ProLiant servers, use the HPE
http://www.hpproliantoptions.com/. For
HPE Integrity servers and HPE Storage solutions, please review the
QuickSpecs
HPE Common Slot Power Supplies
Service and Support
Page 7
Service and Support
NOTE:
Infrastructure
HPE
HPE
s
support technology lets you to tap into the knowledge of millions of devices and thousands of experts
to stay informed and in control, anywhere, any time.
Protect your business beyond warranty with
HPE Pointnext operational services
response time as you purchase your new server, giving you full entitlement for the term you select.
HPE Support Center
Personalized online support portal with access to information, tools and experts to support Hewlett
Packard Enterprise business products
E
http://www.hp.com/go/hpsc
The HPE Support
agent for live sup
HPE
ewlett
P
agreement
*The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible S
replaced by Hewlett Packard Enterprise due to malfunction.
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers Hewlett Packard Enterprise-branded
hardware options qualified for the server, purchase
enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at
the same service level and for the same coverage period as the server unless the maximum supported
lif
included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by
or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by
E
maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet
are not eligible for the defective media retention service feature option.
For more information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
HPE Common Slot power supplies are supported as a part of the HPE Server
. No separate care packs are needed to be purchased.
Technology Services for Industry Standard Servers
Technology Services delivers confidence, reduces risk and helps customers realize agility and
tability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our
HPE Pointnext operational services
enable you to order the right service level, length of coverage and
. Submit support cases online, chat with Hewlett Packard
nterprise experts, access support resources or collaborate with peers. Learn more
Center Mobile App* allows you to resolve issues yourself or quickly connect to an
port. Now, you can get access to personalized IT support anywhere, anytime.
Insight Remote Support and HPE Support Center are available at no additional cost with a H
ackard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support
.
covered hardware product in operating condition, including parts and materials for
in the manufacturer's operating manual, product quick-specs, or the
d at the same time or afterward, internal to the
etime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not
nterprise as consumable parts and/or that have exceeded maximum supported lifetime and/or the
Hewlett Packard Enterprise due to malfunction. It does not apply to any exchange of Disk
SD/Flash Drives
Hewlett Packard
QuickSpecs
HPE Common Slot Power Supplies
Service and Support
Page 8
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant or http://www.hp.com/services/bladesystem
QuickSpecs
HPE Common Slot Power Supplies
Related Options
Page 9
Related Options
Common Slot Power
Supply Enablement Kits
HP DL160 Gen8 FIO Power Backplane Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power supply and power backplane kit for the DL160 Gen8 must be factory
installed and cannot be purchased as separate options.
662959-B21
HP DL320e Gen8 Factory Integrated RPS Enablement Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power supply and enablement kit for the DL320e Gen8 must be factory
installed and cannot be purchased as separate options.
675451-B21
HP 4U Redundant Power Supply Enablement Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power
installed and cannot be purchased as separate options.
675843-B21
HP Redundant Enablement Kit
NOTE:
supply, this kit must be used
supply and enablement kit for the ML350e Gen8 must be factory installed and
cannot be purchased as separate options.
664046-B21
HP 4X1200W RPS FIO Enablement Kit
NOTE:
supply, this kit must be used for proper installation. The Common Slot power
supply and enablement kit for the Ml350p Gen8 must be factory installed and
cannot be purchased as separate options.
659487-B21
VAC C13 to C14 Power
C
HPE C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
A0K03A
HPE C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
A0K04A
HPE C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord
AF573A
HPE C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord
A0K06A
HPE C13 - C14 WW 250V 10Amp 0.7m Jumper Cord
142257-B28
HPE C13 - C14 WW 250V 10Amp 1.4m Jumper Cord
142257-006
HPE C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord
142257-007
HPE C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
A0K02A
HPE C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
142257-002
HPE C13 - C14 WW 250V 10Amp 3.0m Jumper Cord
142257-003
NOTE: Standard power cables and jumpers do not support Power Line
When configuring the HPE DL160 Gen 8 with a Common Slot power
When configuring the HPE DL320e Gen 8 with a Common Slot power
When configuring the HPE ML310e Gen 8 with a Common Slot power
supply and enablement kit for the Ml310e Gen8 must be factory
When configuring the HPE ML350e Gen 8 with a Common Slot power
for proper installation. The Common Slot power
When configuring the HPE ML350p Gen 8 with a Common Slot power
ables
QuickSpecs
HPE Common Slot Power Supplies
Related Options
Page 10
Communications or Power Discovery Services.
Power Line
Communication (PLC)
Power Cables
HP C13 - C14 WW 250V 10Amp IPD 0.76m 1pc Jumper Cord
SG506A
HPE C13 - C14 WW 250V 10Amp IPD 0.76m 5pc Jumper Cord
SG507A
HPE C13 - C14 WW 250V 10Amp IPD 1.37m 1pc Jumper Cord
SG508A
HPE C13 - C14 WW 250V 10Amp IPD 1.37m 5pc Jumper Cord
SG509A
HPE C13 - C14 WW 250V 10Amp IPD 1.83m 1pc Jumper Cord
SG510A
HPE C13 - C14 WW 250V 10Amp IPD 1.83m 5pc Jumper Cord
SG511A
HPE C13 - C14 WW 250V 10Amp IPD 3.0m 1pc Jumper Cord
SG512A
277VAC Power Cables
HP LS-26 to LS-25 277 Volt 15Amp AC 0.76m Jumper Cord
TK801A
HPE LS-26 to LS-25 277 Volt 15Amp AC 1.37M Jumper Cord
NOTE:NOTE: This power cord option is for use with the HPE Common Slot 277VAC
Hot Plug Power Supply Kits (717359
TK802A
VDC Power Cables
HPE 1.3M 48V DC Power Cable Kit
A5S97A
HPE 2.5M 48V DC Power Cable Kit
A5S98A
HP 8AWG W/Ground Lug 48V DC 3.0m Power Cord
J6X42A
NOTE:
Common Slot
needs to be used with 1500W Common Slot -48VDC Power Supply (746708-B21).
NOTE:
cords/cable part numbers, input/output descriptions:
http://www.hp.com/go/powercordmatrix
-B21, 717362-B21, and 717364-B21).
The VDC cable options listed above can only be used with the HPE 750W
-48VDC Power Supply (636673-B21) excluding J6X42A which
Please refer to the Power Cord Matrix for more information on power
.
QuickSpecs
HPE Common Slot Power Supplies
Power Specifications
Page 11
HP 750W Common Slot Titanium Hot Plug Power
Supply Kit (697581
HPE Generic Part Number
697579-001
HPE
Input Voltage Range ( V rms ) 200 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
200
208
220
230
240
Maximum Rated Output Wattage Rating
750
750
750
750
750
Nominal Input Current ( A rms )
4.0
3.9
3.7
3.5
3.3
Maximum Rated Input Wattage Rating ( Watts )
803 802 800
799
798
Maximum Rated VA ( Volt-Amp )
806 805 804
803
803
Efficiency ( % )
93.4
93.5
93.7
93.8
93.9
Power Factor
0.996
0.995
0.996
0.995
0.994
Leakage Current ( mA )
0.50
0.75
0.79
0.83
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 0.2
Maximum British Thermal Unit Rating ( BTU-Hr )
2739
2735 2731
2728
2724
HPE 460W Common Slot Platinum Plus Hot Plug
Power Supply Kit (656362
HPE Generic Part Number
643931
HPE Spares Part Number
660184
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
HPE Generic Part Number
643931-001
HPE
-B21)
Spares Part Number
700287-001
-B21)
-001
-001
- 240
- 60
Spares Part Number
660184-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 12
460
460
460
460
460
Nominal Input Current ( A rms )
5.2
4.3
2.5
2.4
2.3
2.2
2.1
Maximum Rated Inp
517
509
496
496
495
495
494
Maximum Rated VA ( Volt
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
93.1
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
ut Wattage Rating ( Watts )
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 13
0.83
0.87
0.92
0.96
1.00
Maximum
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
1764
1736
1694
1692
1689
1687
1686
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms )
5.2 4.3 2.5 2.4 2.3 2.2 2.1
Maximum Rated Input Wattage Rating ( Watts )
517 509 496 496 495 495 494
Maximum Rated VA ( Volt-Amp )
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
93.1
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
1764
1736
1694
1692
1689
1687
1686
HPE 750W Common Slot Platinum Plus Hot Plug
Power Supply Kit (656363
HPE Generic Part
643932
HPE Spares Part Number
660183
Input Voltage Range ( V rms )
HPE
HPE Spares Part Number
660183-001
Inrush Current ( A peak )
-Hr )
-001
-001
Number
-B21)
Generic Part Number
643932-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 14
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750
750
750
750
750
7
750
Nominal Input Current ( A rms )
8.5
7.0
4.1
3.9
3.7
3.6
3.5
Maximum Rated Input Wattage Rating ( Watts )
843
831
811
811
809
808
821
Maximum Rated VA ( Volt
855
842
822
821
820
819
- 240
50
- 60
-Amp )
Loading...