RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Overview
Figure 1 HP Virtual Connect 8Gb 24-Port Fibre Channel Module Front Bezel
1.
UID Indicator
2.
Module Health Indicator
3.
Port Number and Status Indicator
4.
Link Status Indicator
5.
Port Activity Indicator
6.
Ports 1-8 (8Gb Fibre Channel)
Models
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem
466482-B21
DA - 13295 Worldwide — Version 6 — August 30, 2013
Page 1
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Compatibility
Compatibility
HP BladeSystem ProLiant
and Integrity Servers
HP ProLiant and Integrity
BL c-Class
Server Blade Enclosures
HP ProLiant and Integrity Servers:
Compatible with current releases of HP ProLiant and HP Integrity c-class Blade Servers supporting the
Brocade 804 8Gb FC HBA, QLogic QMH2462 4Gb FC HBA and QMH2562 8Gb FC HBA or Emulex LPe1105-HP
4Gb HBA and LPe1205 8Gb HBA for HP c-Class BladeSystem
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website:
The HP BladeSystem c3000 and c7000 Enclosures have been designed up front with the Virtual Connect
Architecture in mind incorporating the HP Onboard Administrator, ILO Management, and HP Management
tools inside the Virtual Connect framework.
For the latest additional information on required firmware versions and to download firmware upgrades,
see the HP website:
http://www.hp.com/go/bladesystemupdates
http://www.hp.com/go/bladesystemupdates
DA - 13295 Worldwide — Version 6 — August 30, 2013
Page 2
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Supported Products
Supported Configurations
1.
Upper Fan System
2.
Interconnect Bays 1 /2
3.
Interconnect Bays 3 / 4
4.
Interconnect Bays 5 / 6
HP BladeSystem c7000 Enclosure - Rear View
5.
Interconnect Bays 7 / 8
6.
On Board Administrator
7.
Lower Fan System
8.
Rear Redundant Power Complex
HP BladeSystem c3000 Enclosure - Front View
1.
Device Bays 1 thru 8
2.
Enclosure DVD Drive
3.
Standby Onboard Administrator (reserved for Future)
DA - 13295 Worldwide — Version 6 — August 30, 2013
4.
Insight Display
5.
Active Onboard Administrator
Page 3
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Supported Products
HP BladeSystem c3000 Enclosure - Rear View
1.
Local KVM interface (reserved for future)
2.
Interconnect Bay 1
3.
Active Cool Fans
4.
Interconnect Bay 2
5.
Enclosure Up-link and Service Port
6.
Enclosure Down-link
7.
iLO/Onboard Administrator Port
8.
iLO/Onboard Administrator Port 2 (reserved for future)
9.
Power Supplies
10.
Interconnect Bay 4
11.
Interconnect Bay 3
Mezzanines
Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent
management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard
Administrator Guide, Enclosure Setup and Installation Guide provides detailed information on port
mapping.
c7000 Half Height Server Blade
c7000 Full Height Sever Blade
DA - 13295 Worldwide — Version 6 — August 30, 2013
Page 4
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Supported Products
c3000 Half Height Server Blade
The following are supported configurations for the HP Virtual Connect 8Gb 24-Port Fibre Channel Module. Please note that other
interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass-Thru
modules will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non-Virtual
Connect modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual Connect
Modules.
The HP Virtual Connect 8Gb 24-Port Fibre Channel Module requires a Virtual Connect Ethernet Module installed in the system for
management and administration. The HP Virtual Connect 8Gb 24-Port Fibre Channel Module requires Virtual Connect Manager
Firmware version 2.10 or higher. Following are more details:
Not Required
Not Required
Not Supported
Not Required
Not supported
HP BladeSystem c7000 Enclosure
DA - 13295 Worldwide — Version 6 — August 30, 2013
Page 5
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
HP Virtual Connect 8Gb 24-Port Fibre Channel Module for
QuickSpecs
c-Class BladeSystem
Supported Products
NOTE:
The following tables show a number of typical, supported configurations for an HP BladeSystem c7000 Enclosure.