Page 1
Models
ModelsModels
Models
HP X131 10G X2 SC SR Transceiver
J8436A
HP X131 10G X2 SC LR Transceiver
J8437A
HP X131 10G X2 SC ER Transceiver
J8438A
HP X131 10G X2 CX4 Transceiver
J8440C
HP X131 10G X2 SC LRM Transceiver
J9144A
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Overview
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 1
Page 2
HP X131 10G X2 SC SR
HP X131 10G X2 SC SRHP X131 10G X2 SC SR
HP X131 10G X2 SC SR
Transceiver
TransceiverTransceiver
Transceiver
(J8436A)
HP X131 10G X2 SC SR
Transceiver: An X2 format
10-gigabit transceiver with
SC connectors using SR
technology.
Ports
PortsPorts
Ports
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR); Duplex: full only
Connectivity
ConnectivityConnectivity
Connectivity
Connector type
Connector typeConnector type
Connector type
SC
Wavelength
WavelengthWavelength
Wavelength
850 nm
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
1.09 cm)
Weight
WeightWeight
Weight
0.35 lb. (0.16 kg)
Transceiver form factor
Transceiver form factorTransceiver form factor
Transceiver form factor
X2
Environment
EnvironmentEnvironment
Environment
Operating temperature
Operating temperatureOperating temperature
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
Operating relativeOperating relative
Operating relative
humidity
humidityhumidity
humidity
0% to 95%, noncondensing
Nonoperating/Storage
Nonoperating/StorageNonoperating/Storage
Nonoperating/Storage
temperature
temperaturetemperature
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
Nonoperating/StorageNonoperating/Storage
Nonoperating/Storage
relative humidity
relative humidityrelative humidity
relative humidity
0% to 95%, noncondensing
Altitude
AltitudeAltitude
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
1.7 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
2.4 W
Cabling
CablingCabling
Cabling
Cable type::
62.5/125 µm or 50/125 µm (core/cladding) graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
Cable lengthCable length
Cable length
2-300m
Fiber type
Fiber typeFiber type
Fiber type
Multi Mode
Notes
NotesNotes
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 2
Page 3
HP X131 10G X2 SC LR
HP X131 10G X2 SC LRHP X131 10G X2 SC LR
HP X131 10G X2 SC LR
Transceiver
TransceiverTransceiver
Transceiver
(J8437A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LR
standard, providing 10Gigabit connectivity up to
10 km on single-mode
fiber.
Ports
PortsPorts
Ports
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR); Duplex: full only
Connectivity
ConnectivityConnectivity
Connectivity
Connector type
Connector typeConnector type
Connector type
SC
Wavelength
WavelengthWavelength
Wavelength
1310 nm
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
1.09 cm)
Weight
WeightWeight
Weight
0.35 lb. (0.16 kg)
Transceiver form factor
Transceiver form factorTransceiver form factor
Transceiver form factor
X2
Environment
EnvironmentEnvironment
Environment
Operating temperature
Operating temperatureOperating temperature
Operating temperature
32ºF to 104ºF (0ºC to 40ºC)
Operating relative
Operating relativeOperating relative
Operating relative
humidity
humidityhumidity
humidity
15% to 95%, noncondensing
Nonoperating/Storage
Nonoperating/StorageNonoperating/Storage
Nonoperating/Storage
temperature
temperaturetemperature
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude
AltitudeAltitude
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
2 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
3 W
Cabling
CablingCabling
Cabling
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length
Cable lengthCable length
Cable length
2m to 10km with 9/125 ìm single-mode cable
Fiber type
Fiber typeFiber type
Fiber type
Single Mode
Notes
NotesNotes
Notes
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 3
Page 4
HP X131 10G X2 SC ER
HP X131 10G X2 SC ERHP X131 10G X2 SC ER
HP X131 10G X2 SC ER
Transceiver
TransceiverTransceiver
Transceiver
(J8438A)
HP X131 10G X2 SC ER
Transceiver: An X2 format
10-gigabit transceiver with
SC connectors using ER
technology.
Ports
PortsPorts
Ports
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER); Duplex: full only
Connectivity
ConnectivityConnectivity
Connectivity
Connector type
Connector typeConnector type
Connector type
SC
Wavelength
WavelengthWavelength
Wavelength
1550 nm
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
1.09 cm)
Weight
WeightWeight
Weight
0.35 lb. (0.16 kg)
Transceiver form factor
Transceiver form factorTransceiver form factor
Transceiver form factor
X2
Environment
EnvironmentEnvironment
Environment
Operating temperature
Operating temperatureOperating temperature
Operating temperature
32ºF to 104ºF (0ºC to 40ºC)
Operating relative
Operating relativeOperating relative
Operating relative
humidity
humidityhumidity
humidity
15% to 95%, noncondensing
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
3 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
4.5 W
Cabling
CablingCabling
Cabling
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
Cable length
Cable lengthCable length
Cable length
2m to 30km (max 40km on engineered links)
Fiber type
Fiber typeFiber type
Fiber type
Single Mode
Notes
NotesNotes
Notes
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP X131 10G X2 CX4
HP X131 10G X2 CX4HP X131 10G X2 CX4
HP X131 10G X2 CX4
Transceiver
TransceiverTransceiver
Transceiver
(J8440C)
HP X131 10G X2 CX4
Transceiver: An X2 format
10-gigabit CX4
transceiver.
Ports
PortsPorts
Ports
1 CX4 10-GbE port (IEEE 802.3ak Type 10GBASE-CX4); Duplex: full only
Connectivity
ConnectivityConnectivity
Connectivity
Connector type
Connector typeConnector type
Connector type
CX4
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x
1.35 cm)
Weight
WeightWeight
Weight
0.18 lb. (0.08 kg)
Transceiver form factor
Transceiver form factorTransceiver form factor
Transceiver form factor
X2
Environment
EnvironmentEnvironment
Environment
Operating temperature
Operating temperatureOperating temperature
Operating temperature
32ºF to 131ºF (0ºC to 55ºC)
Operating relative
Operating relativeOperating relative
Operating relative
humidity
humidityhumidity
humidity
15% to 95%, noncondensing
Nonoperating/Storage
Nonoperating/StorageNonoperating/Storage
Nonoperating/Storage
temperature
temperaturetemperature
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude
AltitudeAltitude
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
1.0 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
3.3 W
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 4
Page 5
Cabling
CablingCabling
Cabling
Maximum distance:
• 15m with CX4 cables
• 300m with optical media converter and multimode fiber cable
Notes
NotesNotes
Notes
Connector: CX4; Duplex: full
Use CX4 10-GbE cable (0.5-15 m) or HP X130 CX4 Optical Media
Converter (J8439A).
For suggested vendors of CX4 cables, please see the "Cabling" answers on
the "HP 10-GbE Transceivers" FAQs Web page.
Optical Media Converter (OMC) J8439A is not supported on the C version
as the power supply for the OMC was removed in this design.
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
HP X131 10G X2 SC LRM
HP X131 10G X2 SC LRMHP X131 10G X2 SC LRM
HP X131 10G X2 SC LRM
Transceiver
TransceiverTransceiver
Transceiver
(J9144A)
An X2 form-factor
transceiver that supports
the 10-Gigabit LRM
standard, providing 10Gigabit connectivity up to
220 m on legacy
multimode fiber.
Ports
PortsPorts
Ports
1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only
Physical characteristics
Physical characteristicsPhysical characteristics
Physical characteristics
Dimensions
DimensionsDimensions
Dimensions
3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78
cm)
Weight
WeightWeight
Weight
0.35 lb. (0.16 kg)
Transceiver form factor
Transceiver form factorTransceiver form factor
Transceiver form factor
X2
Environment
EnvironmentEnvironment
Environment
Operating temperature
Operating temperatureOperating temperature
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative
Operating relativeOperating relative
Operating relative
humidity
humidityhumidity
humidity
0% to 95%, noncondensing
Nonoperating/Storage
Nonoperating/StorageNonoperating/Storage
Nonoperating/Storage
temperature
temperaturetemperature
temperature
-40ºF to 185ºF (-40ºC to 85ºC)
Altitude
AltitudeAltitude
Altitude
up to 10,000 ft. (3 km)
Electrical characteristics
Electrical characteristicsElectrical characteristics
Electrical characteristics
Power consumption
Power consumptionPower consumption
Power consumption
typical
typicaltypical
typical
3.2 W
Power consumption
Power consumptionPower consumption
Power consumption
maximum
maximummaximum
maximum
4.2 W
Cabling
CablingCabling
Cabling
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch
cord may be needed in some multimode fiber installations);
Maximum distance:
• 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
• 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
• 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
• 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
• 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
Cable length
Cable lengthCable length
Cable length
.5m to 220m
Fiber type
Fiber typeFiber type
Fiber type
Multi Mode
Notes
NotesNotes
Notes
Wavelength: 1310nm
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a modeconditioning patch cord is not required. Other multimode cables may
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 5
Page 6
require mode-conditioning patch cords to achieve the maximum distances
listed above.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9144A 10-GbE X2-SC
LRM Optic" on the "HP 10-GbE Transceivers" Manuals Web page.
Power Consumption: 4W Max
Services
ServicesServices
Services
Refer to the HP website at
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
To learn more, visit
www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
DA - 12987 Worldwide — Version 7 — April 14, 2011
Page 6
Loading...