HP SR1830NX, SR1834NX, SR1838NX, SR1913WM, SR1917CL Service Guide
...
Upgrading and
Servicing Guide
The information in this document is subject to change without
notice.
®
Hewlett-Packard
Company makes no warranty of any kind with regard to this
material, including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose.
HP shall not be liable for errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use of this material.
HP assumes no responsibility for the use or reliability of its software on equipment
that is not furnished by HP.
This document contains proprietary information that is protected by copyright. All
rights are reserved. No part of this document may be photocopied, reproduced,
or translated to another language without the prior written consent of HP.
Hewlett-Packard Company
P.O. Box 4010
Cupertino, CA 95015–4010
USA
Copyright © 2004, 2005 Hewlett-Packard Development Company, L.P.
All rights reserved.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,
4,819,098, and 4,907,093 licensed for limited viewing uses only.
Microsoft and Windows are U.S. Registered trademarks of Microsoft Corporation.
HP supports lawful use of technology and does not endorse or encourage the use
of our products for purposes other than those permitted by national copyright law.
Table of Contents
Safety Information ......................................................................... 1
Opening and Closing the PC ........................................................... 1
Preparing the PC ......................................................................................1
Before Opening the PC .............................................................................1
After Closing the PC..................................................................................2
Removing the Side Panel ...........................................................................2
Replacing the Side Panel ...........................................................................2
Removing the Front Panel...........................................................................2
Replacing the Front Panel ..........................................................................3
Locating Components Inside the PC ............................................................3
Removing and Replacing Drives ..................................................... 3
Removing a Drive ..................................................................................... 4
Replacing or Adding a Drive......................................................................5
Adding Memory ............................................................................. 7
Removing a Memory Module .....................................................................7
Installing a Memory Module ......................................................................8
Removing or Installing an Add-In Card........................................... 8
Removing an Add-In Card .........................................................................9
Installing an Add-In Card...........................................................................9
Replacing the Battery ................................................................... 10
Upgrading and Servicing Guide
iii
iv Upgrading and Servicing Guide
Safety Information
W
WARNING: Always disconnect the modem
This product has not been evaluated for connection to
an “IT” power system (an AC distribution system with
no direct connection to earth, according to
IEC 60950).
WARNING: Please read “Safety
Information” in the
Guide before installing and connecting
your system to the electrical power
system.
arranty and Support
Opening and Closing the PC
Preparing the PC
Before you upgrade any component in your PC, you
need to prepare the PC so that you can safely handle
it and the components.
Read the following items before attempting to upgrade
or service the PC.
• These procedures assume familiarity with the
general terminology associated with personal
computers and with the safety practices and
regulatory compliance required for using and
modifying electronic equipment.
• Write down and save the system model and
serial numbers, all installed options, and other
information about the system. It’s easier to consult
this information than to open up and examine
the PC.
• It is recommended that you use an antistatic wrist
strap and a conductive foam pad when working on
the system.
cord from the telephone system, and then
disconnect the PC from the power source
before removing the front and side panels
of the PC. Failure to do so before you
open the PC or do any procedures can
result in personal injury or equipment
damage.
Before Opening the PC
1 Remove any diskette or optical disc (CD or DVD)
from the PC.
2 Click the Start button, and then click Turn Off
Computer. Click Turn Off.
3 Disconnect the modem/telephone cable, if present.
CAUTION: To reduce the risk of personal
injury from electrical shock or hot
surfaces, disconnect the power cord from
the wall outlet, and allow the internal
system components to cool before
touching.
4 Disconnect the power cord from the electrical outlet
and then from the PC.
5 Disconnect all other attached cables (such as the
keyboard, mouse, and monitor) and all external
devices.
CAUTION: Static electricity can damage
the electronic components of the PC or
optional equipment. Ensure that you are
discharged of static electricity by briefly
touching a grounded metal object.
Upgrading and Servicing Guide 1
Loading...