HP ScanJet Pro 2000 s1, 3000 s3
HP ScanJet Enterprise Flow 5000 s4, Flow 7000 s3
EN FR ES PT
2000 s1 |
3000 s3 |
5000 s4 |
7000 s3 |
Installation Guide Guide d'installation Guía de instalación
Guia de Instalação
הנקתהךירדמ HE
www.hp.com/support
ES Lea esto primero
1
2.6-3.8kg
5.7-8.4lb
2
Remove all tape and packing material from the scanner.
Retirez le ruban adhésif et les matériaux d'emballage du scanner.
Retire toda la cinta y el material de embalaje del escáner.
PT Remova todas as fitas e o material de embalagem do scanner.
.קרוסהמהזיראהירמוחוםיטרסהלכתארסה HE
3
EN
FR ES
PT
Connect the power cable to the power supply and connect the power supply cable into a power outlet or surge protector.
Branchez le câble à l'alimentation, puis branchez le câble d'alimentation à une prise ou à un dispositif de protection contre les surtensions.
Conecte el cable a la fuente de alimentación y, seguidamente, enchufe el cable de la fuente de alimentación a un tomacorriente o protector de sobretensión.
Conecte a fonte de alimentação ao cabo correspondente e conecte esse cabo a uma tomada elétrica ou estabilizador.
.קספ-לאלואלמשחעקשלחתמהקפסלבכתארבחןכמרחאלוחתמהקפסלחתמהלבכתארבח HE
2
4
|
2 |
1 |
1 |
If the green LED is on, plug the power supply into the back of the scanner (1) and then press the Power button (2).
Si le voyant vert est allumé, branchez l'alimentation au dos du scanner (1), puis appuyez sur le bouton Power (2).
Si el indicador LED verde está encendido, conecte la fuente de alimentación en la parte posterior del escáner (1) y pulse el botón de encendido (2). PT Se o LED verde estiver aceso, conecte a fonte de alimentação à parte de trás do scanner (1) e pressione o botão Liga/Desliga (2).
.(2) יוביכ/הלעפההןצחללעץחלןכמרחאלו,(1) קרוסהלשירוחאהוקלחלחתמהקפסתארבח,תקלודהקוריהתירונהםא HE
5
2000 s1
3000 s3
EN
FR
ES
PT
Windows®: Do not connect the USB cable until prompted during the software installation in the next step.
OS X (2000 s1 and 3000 s3 only): Connect the USB cable now.
Windows® : ne branchez pas le câble USB tant que vous n'y êtes pas invité durant l'installation du logiciel à l'étape suivante.
OS X (2000 s1 et 3000 s3 uniquement) : branchez le câble USB maintenant.
Windows®: No conecte el cable USB hasta que se le indique durante la instalación del software en el siguiente paso.
OS X (solo 2000 s1 y 3000 s3): Conecte ahora el cable USB.
Windows®: Não conecte o cabo USB até que seja solicitado a fazê-lo durante a instalação do software na próxima etapa.
OS X (2000 s1 e 3000 s3 somente): Conecte o cabo USB agora.
.אבהבלשבהנכותהתנקתהךלהמבשקבתתשדעUSB-הלבכתארבחתלא:Windows® |
HE |
.USB-הלבכתאתעכרבח:(דבלב3000 s3-ו2000 s1) OS X |
|
3