HP ScanJet Pro 2000 s1, 3000 s3
HP ScanJet Enterprise Flow 5000 s4, Flow 7000 s3
KO
설치설명서
TH
TW
ู
ค
อการติดต
่มื
安裝指南
้
ง
ั
www.hp.com/support
2013 Hewlett-Packard Development Company, L.P.
HP COLOR LASERJET ENTERPRISE
FLOW MFP XXXX
www.hp.com
2013 Hewlett-Packard Development Company, L.P.
HP COLOR LASERJET ENTERPRISE
FLOW MFP XXXX
www.hp.com
2013 Hewlett-Packard Development Company, L.P.
HP COLOR LASERJET ENTERPRISE
FLOW MFP XXXX
www.hp.com
2013 Hewlett-Packard Development Company, L.P.
HP COLOR LASERJET ENTERPRISE
FLOW MFP XXXX
www.hp.com
1
2
Remove all tape and packing material from the scanner.
EN
2.6-3.8 kg
5.7-8.4 lb
3
CN
从扫描仪外部取下所有胶带和包装材料。
Lepas semua perekat dan bahan kemasan dari pemindai.
IN
스캐너를포장한테이프와포장재를모두제거합니다.
KO
แกะเทปและวัสดุบรรจุภัณฑ์ท
TH
請取下掃描器的所有膠帶與包裝材料。
TW
Connect the power cable to the power supply and connect the power supply cable into a power outlet or surge protector.
EN
้
งหมดออกจากสแกนเนอร์
ั
CN
把电源线连接到电源上并且把供电电缆接入电源插座或电涌保护器。
Sambungkan kabel daya ke catu daya, lalu sambungkan kabel catu daya ke stopkontak atau pelindung daya.
IN
전원케이블을전원공급장치에연결하고전원공급케이블을전원콘센트또는충격전압흡수기에연결합니다.
KO
ต่อสายไฟเข้ากับอุปกรณ์จ่ายไฟจากน
TH
TW
將電源線連接到電源供應器,並將電源供應器纜線連接到電源插座或突波保護器。
้
นต่อสายของอุปกรณ์จ่ายไฟเข้ากับปล
ั
๊
กไฟ หรืออุปกรณ์ป้องกันไฟกระชาก
ั
2
4
1
1
If the green LED is on, plug the power supply into the back of the scanner (1) and then press the Power button (2).
EN
CN
如果绿色 LED 亮起,将电源插入扫描仪背面 (1),然后按“电源”按钮 (2)。
ID
Jika LED hijau menyala, colokkan catu daya ke bagian belakang pemindai (1), lalu tekan tombol Daya (2).
KO
LED가녹색이면전원공급장치를스캐너뒷면(1)에연결한다음전원버튼(2)을누릅니다.
TH
หากไฟ LED สีเขียวติดสว่างให้เสียบสายไฟเข้ากับด้านหลังของสแกนเนอร์ (1) จากน
TW
如果綠色 LED 亮起,則將電源供應器插到掃描器背面 (1),然後按電源按鈕 (2)。
1
1
้
นกดป
ั
ุ
มเปิด/ปิดเคร
่
่
อง (2)
ื
2
2
5
2000 s1
3000 s3
Windows®: Do not connect the USB cable until prompted during the software installation in the next step.
EN
OS X (2000 s1 and 3000 s3 only): Connect the USB cable now.
CN
Windows®:直到软件安装过程的下一步中出现提示后,再连接 USB 电缆。
OS X(仅限 2000 s1 和 3000 s3):立即连接 USB 电缆。
Windows®: Jangan sambungkan kabel USB sebelum diminta selama instalasi perangkat lunak pada langkah berikutnya.
IN
OS X (hanya 2000 s1 dan 3000 s3): Sambungkan kabel USB sekarang.
Windows®: 다음단계에서소프트웨어를설치하는동안메시지가나타날때까지 USB 케이블을연결하지마십시오.
KO
OS X(2000 s1 및 3000 s3만해당): USB 케이블을지금연결하십시오.
Windows®: อย่าเพ
TH
OS X (2000 s1 และ 3000 s3 เท่าน
่
งเช
ิ
่
อมต่อสาย USB จนกว่าจะมีการพรอมต์ให้เช
ื
่
้
น): เช
อมต่อสาย USB ได้เลยตอนน
ื
ั
่
อมต่อ ในระหว่างการติดต
ื
้
ี
้
งซอฟต์แวร์ข
ั
้
นตอนถัดไป
ั
Windows®:請勿連接 USB 纜線,直到下一步驟中的軟體安裝期間出現提示。
TW
OS X(僅適用於 2000 s1 和 3000 s3): 立即連接 USB 纜線。
3
6
1. Install the scanner software from the CD. Follow the on-screen instructions.
EN
2. Install the optional Windows software (Readiris Pro for OCR, Cardiris for business cards, PaperPort for personal document management,
andKofax VRS Pro for image quality for 7000 s3 models only) from their respective CDs, or download from the support website:
www.hp.com/go/sj2000s1, www.hp.com/go/sj3000s3, www.hp.com/go/sj5000s4, or www.hp.com/go/sj7000s3.
CN
1. 安装 CD 中的扫描仪软件。按照屏幕上的说明进行操作。
2. 从相应的 CD 安装可选 Windows 软件(用于 OCR 的 Readiris Pro、用于名片的 Cardiris、用于个人文档管理
1. Instal perangkat lunak pemindai dari CD. Ikuti petunjuk di layar.
IN
2. Instal perangkat lunak opsional Windows (Readiris Pro untuk OCR, Cardiris untuk kartu nama, PaperPort untuk manajemen dokumen
pribadi, dan Kofax VRS Pro untuk kualitas gambar untuk model 7000 s3 saja) dari masing-masing CD, atau unduh dari situs web dukungan:
www.hp.com/go/sj2000s1, www.hp.com/go/sj3000s3, www.hp.com/go/sj5000s4, atau www.hp.com/go/sj7000s3.
1. CD의 스캐너소프트웨어를설치합니다. 화면의지시에따릅니다.
KO
2. 선택 사항인 Windows 소프트웨어(OCR용 Readiris Pro, 명함용 Cardiris, 개인 문서 관리용 PaperPort 및 7000 s3 모델 전용 Kofax VRS Pro 이
미지 품질 관리)는 각각의 CD에서 설치하거나 지원 웹 사이트(www.hp.com/go/sj2000s1, www.hp.com/go/sj3000s3,
Reproduction, adaptation or translation without prior written permission
is prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Edition 1, 10/2016
Trademark Credits
Windows® is a U.S. registered trademark of Microsoft Corporation.
OS X is a trademark of Apple Inc., registered in the U.S. and other
countries.
Regulatory Information
Additional regulatory information about your scanner can be found in the
Warranty and Legal Guide.
Regulatory Model Identication Number: For regulatory identication
purposes your product is assigned a Regulatory Model Number. The
Regulatory Model Number for HP ScanJet Pro 2000 s1 Scanner is
SHNGD-1601, HP ScanJet Pro 3000 s3 Scanner is SHNGD-1602, HP ScanJet
Enterprise Flow 5000 s4 Scanner is SHNGD-1603, and HP ScanJet Enterprise
Flow 7000 s3 Scanner is SHNGD-1604. This regulatory number should not be
confused with the marketing name and product numbers.
(HP ScanJet Pro 2000 s1 Scanner) or product number (L2759A)
(HP ScanJet Pro 3000 s3 Scanner) or product number (L2753A)
(HP ScanJet Enterprise Flow 5000 s4 Scanner) or product number (L2755A)
(HP ScanJet Enterprise Flow 7000 s3 Scanner) or product number (L2757A).