HP Presario G61-511, Presario GQ61-300, Presario GQ61-100, Presario GQ61-200, Compaq Presario CQ61 Maintenance And Service Manual

...

Download

Page 1

Compaq Presario CQ61 Notebook PC HP G61 Notebook PC

Maintenance and Service Guide

Document Part Number: 518438-001

May 2009

This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts; and performing computer disassembly procedures.

Page 2

Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Celeron, Core, and Pentium are trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows, and Windows Vista are U.S. registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

First Edition: May 2009 Document Part Number: 518438-001

Safety warning notice

WARNING: To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly

on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of Information Technology Equipment (IEC 60950).

Page 3

Contents

1 Product description

2 External component identification

Top components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1

TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1

Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2

Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–4

Front components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Rear components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–5

Left-side components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–6

Right-side components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–7

Bottom components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–8

Display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–9

Wireless antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–10

Additional hardware components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–11

3 Illustrated parts catalog

Service tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1

Computer major components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2

Display assembly components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–10

Plastics Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–12

Mass storage devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–12

Miscellaneous parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13

Sequential part number listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14

Maintenance and Service Guide iv

Page 4

Contents

4 Removal and replacement procedures

Preliminary replacement requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

Service considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1

Grounding guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2

Component replacement procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5

Service tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5

Computer feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6

Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7

Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8

Hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10

RTC battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–12

Memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–13

Wireless module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–14

Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–16

Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–17

Switch cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–20

Power button board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–22

Display assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–23

Top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–30

Audio board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–32

Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–33

USB board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–34

Bluetooth module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–35

System board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–36

Fan/heat sink assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–38

Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Power connector cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–44

RJ-11 connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–45

. . . . . . . . . . . . 4–42

5 Setup Utility

Starting Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1

Changing the language of the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–1

Navigating and selecting in the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2

Displaying system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2

Restoring default settings in Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2

Exiting Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

Setup Utility menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3

System Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4

Diagnostics menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–4

v Maintenance and Service Guide

Page 5

6 Specifications

Computer specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–1

16-inch WXGA display specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2

15.6-inch WXGA display specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–2

Hard drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–3

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications. . . . . . 6–4

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive specifications . . . . . . . . . 6–5

System DMA specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–5

System interrupt specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–6

System I/O address specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–6

System memory map specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–8

7 Screw listing

Phillips PM2.0×3.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1

Phillips PM2.5×5.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–4

Phillips PM2.5×6.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–5

Phillips PM2.5×6.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–8

Phillips PM2.5×7.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–10

Phillips PM2.5×8.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–13

Phillips PM3.0×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–14

Contents

8 Backup and recovery

Creating recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1

When to back up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2

Backup suggestions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–2

Using system restore points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–3

Performing a recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4

Recovering from the recovery discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–4

Recovering from the dedicated recovery partition (select models only) . . . . . . . . . . . . . . . . . . . . . . . 8–4

Maintenance and Service Guide vi

Page 6

Contents

9 Connector pin assignments

Audio-in (microphone). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1

Audio-out (headphone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–1

External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–2

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–3

RJ-11 (modem). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4

RJ-45 (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–4

Universal Serial Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9–5

10Power cord set requirements

Requirements for all countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1

Requirements for specific countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2

11Recycling

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1

Index

vii Maintenance and Service Guide

Page 7

Product description

Presario

CQ61

Category Description

Product name Compaq Presario CQ61 Notebook PC X X

HP G61 Notebook PC X X X X

Processors Intel® Core™2 Duo processors

(3-MB L2 cache, 1066-MHz front side bus (FSB))

■ P8700 2.53-GHz processor X X X X X X

■ P7450 2.13-GHz processor X X X X X X

Intel Core2 Duo processors (2-MB L2 cache, 800-MHz FSB)

■ T6600 2.2-GHz processor X X X X X X

■ T6400 2.0-GHz processor X X X X X X

Intel Pentium® Dual-Core processor (1-MB L2 cache, 667-MHz FSB)

■ T3400 2.16-GHz processor X X X X X X

Intel Pentium Dual-Core processors (1-MB L2 cache, 800-MHz FSB)

■ T4200 2.0-GHz processor X X X X X X

Intel UMA

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

HP G61

Intel

Discrete

Silver

HP G61

UMA

HP G61 Discrete

Intel Celeron® processors (1-MB L2 cache, 667-MHz FSB)

■ 585 2.16-GHz processor X X X

Intel Celeron 900 processors (1-MB L2 cache, 667-MHz FSB)

■ T1700 1.83-GHz processor X X X

■ T1600 1.66-GHz processor X X X

(Continued)

Maintenance and Service Guide 1–1

Page 8

Product description

HP G61

Intel

Discrete

Silver

HP G61

UMA

Category Description

Presario

CQ61

Intel UMA

Presario

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

Chipset Intel GM45 X X X

Intel GL40 X X X

Intel PM45 X X X

Southbridge ICH9M X X X X X

Graphics Intel Graphics Media Accelerator

XXX

4500MHD (Shared)

Unified Memory Architecture (UMA) graphics memory integrated with shared video memory

■ Up to 1759 MB of graphics subsystem

XXX memory when total system Random Assess Memory (RAM) equals or is greater than 4096 MB (64-bit)

■ Up to 1309 MB of graphics subsystem

XXX memory when total system RAM equals or is greater than 4096 MB (32-bit)

■ Up to 1309 MB of graphics subsystem

XXX memory when total system RAM equals or is greater than 3072 MB

HP G61 Discrete

■ Up to 797 MB of graphics subsystem memory when total system RAM equals or is greater than 2048 MB

■ Up to 285 MB of graphics subsystem memory when total system RAM equals or is greater than 1024 MB

NVIDIA N10M-GE2-S with 512 MB of dedicated video memory (64M × 16 DDR2 × 4 PCs) Total available video memory

■ Up to 2302 MB of graphics subsystem memory when total system RAM equals or is greater than 4096 MB (64-bit)

■ Up to 1790 MB of graphics subsystem memory when total system RAM equals or is greater than 4096 MB (32-bit)

■ Up to 1790 MB of graphics subsystem memory when total system RAM equals or is greater than 3072 MB

■ Up to 1278 MB of graphics subsystem memory when total system RAM equals or is greater than 2048 MB

XXX

■ Up to 767 MB of graphics subsystem memory when total system RAM equals or is greater than 1024 MB

1–2 Maintenance and Service Guide

XXX

(Continued)

Page 9

Product description

Category Description

Panel 16-inch HD BrightView display panel

(1366 × 768)

15.6-inch HD BrightView display panel (1366 × 768)

16:9 Wide Aspect Ratio X X X X X X

Memory 2 customer-accessible/upgradable

SODIMM slots

Supports dual-channel memory DDR2 800 MHz dual-channel support

Supports up to 8 GB of system memory X X X X X X

Supports the following configurations:

■ 8192-MB total system memory (4096 × 2)

■ 4096-MB total system memory (2048 × 2)

■ 3072-MB total system memory (2048 × 1 + 1024 × 1)

■ 2048-MB total system memory (2048 × 1, 1024 × 2)

HP G61

Intel

Discrete

Silver

HP G61

UMA

HP G61

Discrete

Presario

CQ61

Intel UMA

Presario

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

XXXXXX

■ 1024-MB total system memory

XXXXXX

(1024 × 1)

Hard drives Supports all 9.5-mm, 6.35-cm (2.50-in)

XXXXXX

SATA hard drives

Customer accessible X X X X X X

Single hard drive configurations:

■ 500-GB, 5400-rpm X X X X X X

■ 320-GB, 5400-rpm X X X X X X

■ 250-GB, 5400-rpm X X X X X X

■ 160-GB, 5400-rpm X X X X X X

Optical drives 12.7-mm fixed SATA tray load X X X X X X

DVD±RW and CD-RW SuperMulti

XXXXXX Double-Layer Combo Drive with LightScribe

Blue-ray ROM with LightScribe

XXXXXX DVD±R/RW SuperMulti Double-Layer Drive

(Continued)

Maintenance and Service Guide 1–3

Page 10

Product description

HP G61

Intel

Discrete

Silver

HP G61

UMA

Category Description

Webcam VGA camera, fixed angle with activity

Presario

CQ61

Intel UMA

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

XXXXXX

light

Microphone Integrated single analog microphone X X X X X

Audio High-definition audio supports Microsoft

XXXXXX

premium requirements

Modem 56K V.92 data/fax modem

XXXXXX (select models only; computer models not equipped with a modem have a cover over the RJ-11 jack opening)

Supports all worldwide certification

XXXXXX requirements

Ethernet Integrated 10/100 network interface

XXXXXX card (NIC)

Realtek 8102E X X X X X X

Wireless Integrated wireless local area network

(WLAN) by way of wireless module:

2 wireless antennas built into display

XXXXXX assembly

HP G61 Discrete

External media cards

Support for no-WLAN option X X X X X X

Support for the following WLAN formats: X X

■ Atheros AR9280 802.11a/g/n X X X X X X

■ Atheros AR2425 802.11b/g X X X X X X

■ Atheros 802.11 b/g/n X X X X X X

■ Atheros 802.11 a/b/g/n X X X X X

■ Broadcom BCM4312 802.11b/g X X X X X X

■ Intel Wi-Fi 5100 802.11 a/b/g X X X X X

Digital Media Slot supporting SD, MMC,

XXXXXX MS, MSPro, xD cards. With adapter (not included), supports mini versions of SD, MMC, MS Duo.

(Continued)

1–4 Maintenance and Service Guide

Page 11

Product description

HP G61

Intel

Discrete

Silver

HP G61

UMA

HP G61

Discrete

Category Description

Presario

CQ61

Intel UMA

Presario

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

Ports Audio-in (stereo microphone) X X X X X X

Audio-out (stereo headphone) X X X X X X

High-Definition Multimedia Interface

XXXXXX (HDMI) version 1.3 supporting 1080p with High-bandwidth Digital Content Protection (HDCP) key (select models only)

RJ-11 (modem) X X X X X X

RJ-45 (Ethernet) X X X X X X

USB (3; one is an eSATA/USB port) X X X X X X

VGA (Dsub 15-pin) supporting

XXXXXX 1920 × 1200 external resolution at 75 Hz, 1600 × 1200 external resolution at 75 Hz

Multi-pin AC power X X X X X X

Docking None

Keyboard and TouchPad

Full-size keyboard, 40.64-cm (16.00-in) with numeric keypad

XXXXXX

TouchPad with 2 TouchPad buttons X X X X X

Supports 2-way scroll with legend X X X X X X

Taps enabled as default X X X X X X

Power requirements

65-W AC adapter with localized cable plug support

90-W AC adapter with localized cable

XXXX

XXX

plug support

6-cell, 2.20-Ah, 47-Wh battery X X X X X

Security Kensington Security Lock X X X X X X

Operating

Preinstalled: X

system

Windows Vista® Business 32-bit X X X X X X

Windows Vista Premium 32- and

XXXXX 64-bit

Windows Vista Home Basic 32-bit X X X X X X

FreeDOS X X X

RedFlag Linux X X X

(Continued)

Maintenance and Service Guide 1–5

Page 12

Product description

Category Description

Serviceability

End-user replaceable parts:

AC adapter X X X X X

Battery (system) X X X X X

Hard drive X X X X X X

Memory module X X X X X X

Optical drive X X X X X X

Mini Card components X X X X X X

Presario

CQ61

Intel UMA

Presario

CQ61

Intel

Discrete

HP G61

Intel UMA

Silver

HP G61

Intel

Discrete

Silver

HP G61

UMA

HP G61 Discrete

1–6 Maintenance and Service Guide

Page 13

Top components

TouchPad

External component identification

Item Component Function

TouchPad on/off button Enables/disables the TouchPad.

TouchPad* Moves the pointer and selects or activates items on the screen.

Left TouchPad button* Functions like the left button on an external mouse.

TouchPad light ■ White: TouchPad is enabled.

■ Amber: TouchPad is disabled.

TouchPad scroll zone Scrolls up or down.

Right TouchPad button* Functions like the right button on an external mouse.

*This table describes factory settings. To view and change pointing device preferences, select Start > Control Panel > Hardware and Sound > Mouse.

Maintenance and Service Guide 2–1

Page 14

External component identification

Lights

Your computer may look slightly different from the illustration in this section.

✎

Item Component Description

Caps lock light On: Caps lock is on.

2 Power lights (2)* ■ On: The computer is on.

■ Blinking: The computer is in the Sleep state.

■ Off: The computer is off or in Hibernation.

3 Wireless light ■ Blue: An integrated wireless device, such as a wireless local area

network (WLAN) device and/or a Bluetooth® device, is on.

■ Amber: All wireless devices are off.

4 Num lock light On: Keypad numeric function is enabled.

5 Battery light ■ On: A battery is charging.

■ Blinking: A battery that is the only available power source has reached a low battery level. When the battery reaches a critical battery level, the battery light begins blinking rapidly.

■ Off: If the computer is plugged into an external power source, the light is turned off when all batteries in the computer are fully charged. If the computer is not plugged into an external power source, the light stays off until the battery reaches a low battery level.

6 Drive light Blinking: The hard drive or optical drive is being accessed.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed.

2–2 Maintenance and Service Guide

Page 15

Buttons

External component identification

Item Component Description

Speakers (2) Produce sound.

Powe r button* ■ When the computer is off, press the button to turn on the

Wireless button Turns the wireless feature on or off but does not create a wireless

*This table describes factory settings. For information about changing factory settings, refer to the user guides located in Help and Support.

computer.

■ When the computer is on, press the button briefly to initiate Sleep.

■ When the computer is in the Sleep state, press the button briefly to exit Sleep.

■ When the computer is in Hibernation, press the button briefly to exit Hibernation.

If the computer has stopped responding and Windows® shutdown procedures are ineffective, press and hold the power button for at least 5 seconds to turn off the computer.

To learn more about your power settings, select Start > Control Panel > System and Maintenance > Power Options.

connection.

To establish a wireless connection, a wireless network

✎

must already be set up.

Maintenance and Service Guide 2–3

Page 16

External component identification

Keys

Your computer may look slightly different from the illustration in this section.

✎

Item Component Description

1 esc key Displays system information when pressed in combination with

fn key.

the

2 fn key Executes frequently used system functions when pressed in

combination with a function key or the

Windows logo key Displays the Windows Start menu.

esc key.

4 Function keys Execute frequently used system functions when pressed in

combination with the

fn key.

5 Windows applications key Displays a shortcut menu for items beneath the pointer.

6 Integrated numeric keypad and volume hotkeys ■ Can be used like the keys on an external numeric keypad.

■ Adjusts system volume when the asterisk (*), minus sign (-), or plus sign (+) is pressed in combination with the

fn key.

2–4 Maintenance and Service Guide

Page 17

Front components

Item Component Description

1 Audio-in (microphone) jack Connects an optional computer headset microphone, stereo array

2 Audio-out (headphone) jack Produces sound when connected to optional powered stereo

Rear components

External component identification

microphone, or monaural microphone.

speakers, headphones, ear buds, a headset, or television audio.

Component Function

Vents (2) Enable airflow to cool internal components.

The computer fan starts up automatically to cool internal

✎

components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

Maintenance and Service Guide 2–5

Page 18

External component identification

Left-side components

Your computer may look slightly different from the illustration in this section.

✎

Item Component Function

1 Security cable slot Attaches an optional security cable to the computer.

2 Vent Enables airflow to cool internal components.

The security cable is designed to act as a deterrent, but it may

✎

not prevent the computer from being mishandled or stolen.

The computer fan starts up automatically to cool internal

✎

components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

3 External monitor port Connects an external VGA monitor or projector.

4 RJ-45 (network) jack Connects a network cable.

5 HDMI port (select models only) Connects an optional video or audio device, such as a high-definition

television, or any compatible digital or audio component.

Depending on your computer model, the computer may include

✎

an HDMI port or a USB port at this location.

eSATA/USB port Connects a high-performance eSATA component, such as an eSATA

Digital Media Slot (select models only) Supports the following digital card formats:

external hard drive, or connects an optional USB device.

■ Memory Stick (MS)

■ Memory Stick Pro (MSP)

■ MultiMediaCard (MMC)

■ Secure Digital (SD) Memory Card

■ xD-Picture Card (XD)

8 Digital Media Slot light (select models only) On: The Digital Media Slot is in use.

2–6 Maintenance and Service Guide

Page 19

Right-side components

Item Component Function

1 Optical drive Reads optical discs and, on select models, also writes to optical discs.

2 Optical drive light Blinking: The optical drive is being accessed.

3 USB ports (2) Connect optional USB devices.

4 RJ-11 (modem) jack (select models only) Connects a modem cable.

5 AC adapter light ■ On: The computer is connected to external power.

External component identification

■ Off: The computer is not connected to external power.

6 Power connector Connects an AC adapter.

Maintenance and Service Guide 2–7

Page 20

External component identification

Bottom components

Item Component Function

1 Battery bay Holds the battery.

2 Battery release latch Releases the battery from the battery bay.

3 Vents (5) Enable airflow to cool internal components.

The computer fan starts up automatically to cool internal

✎

components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

4 Wireless module compartment Holds a wireless LAN module.

To prevent an unresponsive system, replace the wireless

module with only a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support.

5 Hard drive bay Holds the hard drive and contains the memory module slots.

2–8 Maintenance and Service Guide

Page 21

Display components

External component identification

Item Component Description

1 Internal display switch Turns off the display and initiates Sleep if the display is closed

while the power is on.

2 Webcam light (select models only) On: The webcam is in use.

3 Webcam (select models only) Records audio and video and captures still photographs.

4 Internal microphone Records sound.

Maintenance and Service Guide 2–9

Page 22

External component identification

Wireless antennas

Your computer model has at least 2 antennas that send and receive signals from one or more wireless devices. These antennas are not visible from the outside of the computer.

For optimal transmission, keep the areas immediately around the antennas free from obstructions.

✎

To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies to your country or region. These notices are located in Help and Support.

2–10 Maintenance and Service Guide

Page 23

Additional hardware components

External component identification

Item Component Description

1 Power cord* Connects an AC adapter to an AC outlet.

2 AC adapter Converts AC power to DC power.

3 Battery* Powers the computer when the computer is not plugged into

external power.

*Batteries and power cords vary in appearance by region and country.

Maintenance and Service Guide 2–11

Page 24

Service tag

When ordering parts or requesting information, provide the computer serial number and model number located on the service tag.

Illustrated parts catalog

Component Description

1 Product name This is the product name affixed to the front of your computer.

2 Serial number (s/n) This is an alphanumeric identifier that is unique to each product.

3 Part number/ product number

(p/n)

4 Model description This is the alphanumeric identifier you use to locate documents, drivers, and

5 Warranty period This number describes the duration (in years) of the warranty period for this

Maintenance and Service Guide 3–1

This number provides specific information about the product’s hardware components. The part number helps a service technician to determine what components and parts are needed.

support for your computer.

computer.

Page 25

Illustrated parts catalog

Computer major components

3–2 Maintenance and Service Guide

Page 26

Illustrated parts catalog

Item Description Spare Part Number

(1) 16-in High Definition (HD), light-emitting diode (LED) display assembly

For use in HP G61 computer models (includes webcam module and cable, 2 WLAN antenna

530981-001

transceivers and cables, microphone and cable, and logo)

For use in Presario G61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

15.6-in HD, light-emitting diode display assembly

For use in Presario CQ61 computer models (includes microphone and cable, and logo) 530979-001

For use in Presario CQ61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

For use in HP G61 computer models (includes microphone and cable, and logo) 530983-001

For use in HP G61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

(2) Keyboard (includes keyboard cable)

For use in Brazil 517865-201

For use in Canada 517865-121

For use in the Czech Republic 517865-221

For use in Belgium 517865-A41

For use in France 517865-051

For use in Germany 517865-041

For use in Greece 517865-151

For use in Hungry 517865-211

For use in Israel 517865-BB1

530977-001

530978-001

530982-001

For use in Italy 517865-061

For international use 517865-B31

For use in Latin America 517865-161

For us in Japan 517865-291

For used in Norway 517865-091

For use in Portugal 517865-131

For use in Russia 517865-251

For use in Saudi Arabia 517865-171

For use in South Korea 517865-AD1

For use in Spain 517865-071

For use in Switzerland 517865-BG1

For use in Thailand 517865-281

For use in Turkey 517865-141

For use in Taiwan 517865-AB1

For use in the United Kingdom 517865-031

For use in the United States 517865-001

(3) Switch cover 531207-001

(Continued)

Maintenance and Service Guide 3–3

Page 27

Illustrated parts catalog

Item Description Spare Part Number

(4) Power button board (includes power button board cable) 531215-001

(5) Top cover (includes TouchPad board) 531206-001

(6) Fan/heat sink assembly for use with UMA systems (includes replacement thermal material) 531210-001

Fan/heat sink assembly for use with discrete systems (includes replacement thermal material)

Plastics Kit (see “Plastics Kit” on page 12 for contents) 531517-001

(7) Hard drive cover

(8) Wireless module compartment cover

(9) System board

GM45 UMA system board for use with select UMA computer models (includes built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

GM45 UMA system board for use with select UMA computer models (includes built-in modem, Digital Media Slot, and replacement thermal material)

GL40 UMA system board for use only with select UMA computer models (includes built-in modem, Digital Media Slot, and replacement thermal material)

GL40 UMA system board for use with select UMA computer models (includes built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

GL40 UMA system board for use with select UMA computer models (includes built-in modem, Digital Media Slot, HDMI port and replacement thermal material)

PM45 Discrete system board for use with select Discrete computer models (includes built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

PM45 Discrete system board for use with select Discrete computer models (includes built-in modem, Digital Media Slot, and replacement thermal material)

(10) Speakers (include left and right speakers and cables)

531220-001

517839-001

517832-001

517836-001

517835-001

570246-001

517837-001

517838-001

For use in India only 572082-001

For use in all countries and regions except India 531209-001

(11) Audio board (includes audio board cable) 531208-001

(12) Processor (includes replacement thermal material)

Intel Core2 Duo processors (3-MB L2 cache, 1066-MHz FSB)

■ P8700 2.53-GHz processor 507960-001

■ P7550 2.26-GHz processor 573076-001

■ P7450 2.13-GHz processor 507965-001

■ T6600 2.20-GHz processor 513593-001

■ T6500 2.10 GHz processor 572928-001

■ T6400 2.06-GHz processor 513592-001

Intel Pentium Dual-Core processors (1-MB L2 cache, 667-MHz FSB)

■ T3400 2.16-GHz processor 509549-001

Intel Pentium Dual-Core processors (1-MB L2 cache, 800-MHz FSB)

■ T4200 2.06-GHz processor 513599-001

(Continued)

3–4 Maintenance and Service Guide

Page 28

Illustrated parts catalog

Item Description Spare Part Number

Intel Celeron processors (1-MB L2 cache, 667-MHz FSB)

■ 900 2.20-GHz processor 534419-001

■ 585 2.16-GHz processor 519898-001

■ T1700 1.83-GHz processor 534084-001

■ T1600 1.66-GHz processor 532324-001

(13) Power connector cable 533465-001

(14) USB board (does not include USB board cable) 531866-001

USB board cable (included in “Cable Kit” on page 13)

(15) Base enclosure (with card reader, includes rubber feet) 531205-001

Rubber Kit (not illustrated, includes 6 rubber feet) 531213-001

(16) Battery, 6-cell, 2.20-Ah, 47-Wh 531775-001

(17) Bluetooth® module (does not include Bluetooth cable) 483113-001

Bluetooth cable (not illustrated) (included in “Cable Kit” on page 13)

(18) Hard drive (includes hard drive bracket and connector)

500-GB, 5400-rpm 517848-001

320-GB, 5400-rpm 517847-001

250-GB, 5400-rpm 517846-001

160-GB, 5400-rpm 517845-001

Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws) 531204-001

(19) RTC battery 449729-001

(20) Memory modules

PC2-6400, 800-MHz, DDR2

2-GB 517844-001

1-GB 517843-001

(21) Wireless (WLAN) module

Atheros AR9280 802.11 a/g/n WLAN module:

■ For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and

482260-001

the United States

(Continued)

Maintenance and Service Guide 3–5

Page 29

Illustrated parts catalog

Item Description Spare Part Number

■ For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

Atheros AR2425 802.11b/g WLAN module:

■ For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States

482260-002

459339-003

■ For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tu ni s i a , Tur k e y, Tur k m eni s t an, Tu v a l u, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

Atheros 802.11 b/g/n

459339-004

■ For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States

3–6 Maintenance and Service Guide

518436-001

(Continued)

Page 30

Illustrated parts catalog

Item Description Spare Part Number

■ For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tu ni s i a , Tur k e y, Tur k m eni s t an, Tu v a l u, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

Atheros 802.11 a/b/g/n WLAN module

■ For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States

518436-002

518437-001

■ For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tu ni s i a , Tur k e y, Tur k m eni s t an, Tu v a l u, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

518437-002

(Continued)

Maintenance and Service Guide 3–7

Page 31

Illustrated parts catalog

Item Description Spare Part Number

Broadcom BCM4312 802.11b/g WLAN module:

■ For use in Canada, the Cayman Islands, Guam, Puerto Rico, the U.S. Virgin Islands, and the United States

459263-001

Intel Wi-Fi 5100 802.11 a/b/g for use only with Presario G61 computer models

459263-002

■ For use in Russia, Ukraine, and Pakistan 482957-001

(Continued)

3–8 Maintenance and Service Guide

Page 32

Illustrated parts catalog

Item Description Spare Part Number

■ Intel Wi-Fi 5100 802.11 a/b/g

■ For use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda,

480985-001 Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

(22) Optical drive (includes optical drive bezel and bracket)

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe 517850-001

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive 517852-001

Maintenance and Service Guide 3–9

Page 33

Illustrated parts catalog

Display assembly components

3–10 Maintenance and Service Guide

Page 34

Illustrated parts catalog

Item Description Spare Part Number

(1) Display bezel

For use only with 16-in HP G61 display (includes microphone and webcam) 530478-001

For use only with 15.6-in HP G61 display (includes microphone and webcam) 530992-001

For use only with 15.6-in HP G61 display (includes microphone) 534992-001

For use with 16-in Presario CQ-61 display (includes microphone and webcam) 534994-001

For use with 15.6-in Presario CQ-61 display (includes microphone and webcam) 534993-001

For use with 15.6-in Presario CQ-61 display (includes microphone) 534995-001

(2) Webcam module (webcam module cable included in Display Panel Cable Kit, 534077-001) 531202-001

(3) High Definition display panel (includes display panel and backlight cables)

For use only with 16-in display 531216-001

For use only with 15.6-in display 517842-001

(4) Display panel bracket (includes left and right brackets)

For use with 16-in display panels 530996-001

For use with 15.6-in display panels 530995-001

Display Panel Cable Kit with webcam cable (not illustrated) 534077-001

(5) Display Hinge Kit (includes left and right display hinges) 530993-001

(6) Wireless Antenna Kit (includes wireless antenna transceivers and cable)

(7) Microphone and caps lock cable (includes receiver and cable) 531203-001

(8) Display enclosure (includes logo)

For use only with HP G61 computer models 530990-001

For use only with Presario CQ61 computer models 530989-001

Display Rubber Kit (not illustrated, includes display bezel rubber screw covers) 530999-001

Display Screw Kit (not illustrated)

531201-001

■ Phillips PM2.5x5.0 screw

■ Phillips PM2.0x3.0 screw

■ Phillips PM2.5x6.5 screw

Maintenance and Service Guide 3–11

Page 35

Illustrated parts catalog

Plastics Kit

Item Description Spare part number

Plastics Kit: 513517-001

1 Hard drive cover (includes 4 captive screws, secured by C-clips)

2 Wireless module compartment cover (includes 1 captive screw, secured by a C-clip)

Mass storage devices

Item Description Spare part number

1 Hard drive (includes connector and bracket)

500-GB, 5400-rpm 517848-001

320-GB, 5400-rpm 517847-001

250-GB, 5400-rpm 517846-001

160-GB, 5400-rpm 517845-001

Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws) 531204-001

2 Optical drive (includes bezel and bracket)

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe 517850-001

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive 517852-001

3–12 Maintenance and Service Guide

Page 36

Miscellaneous parts

Description Spare part number

AC adapter:

65-W AC adapter 463958-001

90-W AC adapter 463955-001

Cable Kit

■ Audio cable

■ Num lock cable

■ Power button cable

■ RJ-11 cable

■ TouchPad cable

■ USB cable

Modem

56K V.92 data/fax modem for use in the United Sates (select models only) 510100-001

56K V.92 data/fax modem for use in Australia (select models only) 510100-011

Power cord (for use with both HP G61 and Presario CQ 61 computer models)

Illustrated parts catalog

531211-001

For use in Argentina 490371-D01

For use in Australia 490371-011

For use in Brazil 490371-201

For use in Denmark 490371-081

For use in Europe 490371-021

For use in India 490371-D61

For use in Israel 490371-BB1

For use in Italy 490371-061

For use in Japan 490371-291

For use in North America 430971-001

For use in the People’s Republic of China 490371-AA1

For use in South Africa 490371-AR1

For use in South Korea 490371-AD1

For use in Switzerland 490371-111

For use in Taiwan 490371-AB1

For use in the United Kingdom and Singapore 490371-031

Screw Kit

■ Phillips PM2.5x4.0 screw

■ Phillips PM2.0x3.0 screw

■ Phillips PM2.5x6.5 screw

531212-001

Drop in Box (DIB)

HP carrying case 418162-001

Wired headset 371693-001

Wireless laser mouse (includes wireless receiver) 430958-001

Maintenance and Service Guide 3–13

Page 37

Illustrated parts catalog

Sequential part number listing

Spare part number Description number

371693-001 Wired headset

418162-001 HP carrying case

430958-001 Wireless laser mouse (includes wireless receiver)

449729-001 RTC battery

459263-001 Broadcom BCM4312 802.11b/g WLAN module for use in Canada, the Cayman Islands, Guam, Puerto

Rico, the U.S. Virgin Islands, and the United States

459263-002 Broadcom BCM4312 802.11b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,

Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea- Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tob a g o, Tuni s i a , Tu r k e y, Tur k men i s t an , Tu v a lu, U g a nd a , Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

459339-003 Atheros AR2425 802.11b/g WLAN module for use in Canada, the Cayman Islands, Guam, Puerto

Rico, the U.S. Virgin Islands, and the United States

459339-004 Atheros AR2425 802.11b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola,

Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea- Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tob a g o, Tuni s i a , Tu r k e y, Tur k men i s t an , Tu v a lu, U g a nd a , Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

(Continued)

3–14 Maintenance and Service Guide

Page 38

Illustrated parts catalog

Spare part number Description number

463955-001 90-W AC adapter

463598-001 65-W AC adapter

480985-001 Intel Wi-Fi 5100 802.11 a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,

Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tob a g o, Tuni s i a , Tu r k e y, Tur k men i s t an , Tu v a lu, U g a nd a , Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

482260-001 Atheros AR9280 802.11a/g/n WLAN module for use in Canada, the Cayman Islands, Guam, Puerto

Rico, the U.S. Virgin Islands, and the United States

482260-002 Atheros AR9280 802.11a/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola,

Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea- Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

482957-001 Intel Wi-Fi 5100 802.11 a/b/g for use in Russia, Ukraine, and Pakistan

483113-001 Bluetooth module (for Bluetooth cable see “Cable Kit” on page 13))

490371-001 Power cord for use in the United States with both HP G61 and Presario CQ61 computer models

490371-011 Power cord for use in Australia with both HP G61 and Presario CQ 61 computer models

490371-021 Power cord for use in Europe with both HP G61 and Presario CQ 61 computer models

490371-031 Power cord for use in the United Kingdom and Singapore with both HP G61 and Presario CQ 61

computer models

Maintenance and Service Guide 3–15

(Continued)

Page 39

Illustrated parts catalog

Spare part number Description number

490371-061 Power cord for use in Italy with both HP G61 and Presario CQ 61 computer models

490371-081 Power cord for use in Denmark with both HP G61 and Presario CQ 61 computer models

490371-111 Power cord for use in Sweden with both HP G61 and Presario CQ 61 computer models

490371-201 Power cord for use in Brazil with both HP G61 and Presario CQ 61 computer models

490371-291 Power cord for use in Japan with both HP G61 and Presario CQ 61 computer models

490371-AA1 Power cord for use in the People’s Republic of China with both HP G61 and Presario CQ 61 computer

490371-AB1 Power cord for use in Taiwan with both HP G61 and Presario CQ 61 computer models

490371-AD1 Power cord for use in South Korea with both HP G61 and Presario CQ 61 computer models

490371-AR1 Power cord for use in South Africa with both HP G61 and Presario CQ 61 computer models

490371-BB1 Power cord for use in Israel with both HP G61 and Presario CQ 61 computer models

490371-D01 Power cord for use in Argentina with both HP G61 and Presario CQ 61 computer models

490371-D61 Power cord for use in India with both HP G61 and Presario CQ 61 computer models

507960-001 Intel Core2 Duo P8700 2.53-GHZ processor (3-MB L2 cache, 1066-MHz FSB)

507965-001 Intel Core2 Duo P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB)

509549-001 Intel Pentium T3400 2.16-GHz processor (1-MB L2 cache, 667-MHz FSB)

models

510100-001 56K V.92 data/fax modem (select models only, for use in the United Sates)

510100-011 56K V.92 data/fax modem (select models only, for use in Australia)

513592-001 Intel Core2 Duo T6400 2.06-GHz processor (2-MB L2 cache, 800-MHz FSB)

513593-001 Intel Core2 Duo T6600 2.2-GHZ processor (2-MB L2 cache, 800-MHz FSB)

513 599-001 Intel Pentium T4200 2.0-GHz processor (1-MB L2 cache, 800-MHz FSB)

513775-001 Battery, 6-cell, 2.20-Ah, 47-Wh

517832-001 GM45 UMA system board (includes Digital Media Slot and replacement thermal material)

517833-001 GM47 UMA system board (includes Digital Media Slot and replacement thermal material)

517834-001 GM47 UMA system board (includes Digital Media Slot, HDMI port, and replacement thermal material)

517835-001 GL40 UMA system board (includes Digital Media Slot, HDMI port, and replacement thermal material)

517836-001 GL40 UMA system board (includes Digital Media Slot and replacement thermal material)

517837-001 PM45 Discrete system board (includes Digital Media Slot, HDMI port, and replacement thermal

material)

517838-001 PM45 Discrete system material (includes Digital Media Slot, and replacement thermal material)

517839-001 GM45 UMA system board (includes Digital Media Slot, HDMI port, and replacement thermal material)

517842-001 High Definition display panel with both display panel and backlight cables (for use only with 16-in

computer)

517843-001 1-GB memory module (PC2-6400, 667-MHz, DDR2)

517844-001 2-GB memory module (PC2-6400, 800-MHz, DDR2)

517845-001 160-GB hard drive

517846-001 250-GB hard drive

517847-001 320-GB hard drive

517848-001 500-GB hard drive

3–16 Maintenance and Service Guide

(Continued)

Page 40

Spare part number Description number

517850-001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe

517852-001 Blu-ray ROM with LightScribe DVD±RW SuperMulti Double-Layer Drive

517865-001 Keyboard for use in the United States (includes keyboard cable)

517865-031 Keyboard for use in the United Kingdom (includes keyboard cable)

517865-041 Keyboard for use in Germany (includes keyboard cable)

517865-051 Keyboard for use in France (includes keyboard cable)

517865-061 Keyboard for use in Italy (includes keyboard cable)

517865-071 Keyboard for use in Spain (includes keyboard cable)

517865-091 Keyboard for use in Norway (includes keyboard cable)

517865-121 Keyboard for use in Canada (includes keyboard cable)

517865-131 Keyboard for use in Portugal (includes keyboard cable)

517865-141 Keyboard for use in Turkey (includes keyboard cable)

517865-151 Keyboard for use in Greece (includes keyboard cable)

517865-161 Keyboard for use in Latin America (includes keyboard cable)

517865-171 Keyboard for use in Saudi Arabia s (includes keyboard cable)

Illustrated parts catalog

517865-201 Keyboard for use in Brazil (includes keyboard cable)

517865-211 Keyboard for use in Hungary (includes keyboard cable)

517865-221 Keyboard for use in the Czech Republic (includes keyboard cable)

517865-251 Keyboard for use in Russia (includes keyboard cable)

517865-281 Keyboard for use in Thailand (includes keyboard cable)

517865-291 Keyboard for use in Japan (includes keyboard cable)

517865-A41 Keyboard for use in Europe (includes keyboard cable)

517865-AB1 Keyboard for use in Taiwan (includes keyboard cable)

517865-AD1 Keyboard for use in South Korea (includes keyboard cable)

517865-B31 Keyboard for international use (includes keyboard cable)

517865-BB1 Keyboard for use in Israel (includes keyboard cable)

517865-BG1 Keyboard for use in Switzerland (includes keyboard cable)

518436-001 Atheros 802.11 b/g/n WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the

U.S. Virgin Islands, and the United States

(Continued)

Maintenance and Service Guide 3–17

Page 41

Illustrated parts catalog

Spare part number Description number

518436-002 Atheros 802.11 b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua

and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tan z a nia , T h ai l an d , To g o, To n g a, Tr in id a d a nd To b a g o, Tu n i si a , Tu r k e y, Tur k men i s t an , Tuval u , Uga n d a , Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

518437-001 Atheros 802.11 a/b/g/n WLAN module for use in Canada, the Cayman Islands, Guam, Puerto Rico, the

U.S. Virgin Islands, and the United States

518437-002 Atheros 802.11 a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra, Angola,

Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tan z a nia , T h ai l an d , To g o, To n g a, Tr in id a d a nd To b a g o, Tu n i si a , Tu r k e y, Tur k men i s t an , Tuval u , Uga n d a , Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe

519898-001 Intel Celeron-M 585 2.0-GHz processor (1-MB L2 cache, 667-MHz FSB)

530977-001 16-in HD, light-emitting diode display assembly for Presario CQ61 computer models (includes webcam

and cable, microphone and cable, and logo)

530978-001 15.6-in HD, light-emitting diode display assembly for Presario CQ61 computer models (includes

webcam and cable, microphone and cable, and logo)

530979-001 15.6-in HD, light-emitting diode display assembly for Presario CQ61 computer models (includes

microphone and cable, and logo)

3–18 Maintenance and Service Guide

(Continued)

Page 42

Illustrated parts catalog

Spare part number Description number

530981-001 16-in HD, light-emitting diode display assembly for HP G61 computer models (includes webcam and

cable, microphone and cable, and logo)

530982-001 15.6-in HD, light-emitting diode display assembly for HP G61 computer models (includes webcam and

cable, microphone and cable, and logo)

530983-001 15.6-in HD, light-emitting diode display assembly for HP G61 computer models (includes microphone

and cable, and logo)

530989-001 Display enclosure for use with Presario CQ61 computer models

530990-001 Display enclosure for use with HP G61 computer models

530992-001 Display bezel for use with 15.6-in HP G61 display panel (includes microphone)

530993-001 Display Hinge Kit (includes left and right display hinges)

530995-001 Display panel bracket (includes left and right brackets) for use with 15.6-in display panel

530996-001 Display panel bracket (includes left and right brackets) for use with 16-in display panel

530999-001 Display Rubber Kit (includes display bezel rubber screw covers)

531201-001 Display Screw Kit

531202-001 Display webcam module (without cable)

531203-001 Microphone with cable

531204-001 Hard Drive Hardware Kit (includes connector, bracket, and screws)

531205-001 Base enclosure for use only with computer models equipped with a Digital Media Slot and HDMI port

531206-001 Power button board

531207-001 Switch cover

531208-001 Audio board (includes audio board cable)

531209-001 Speakers for use in all countries and regions except India (includes left and right speakers and cables)

521210-001 Fan/heat sink assembly for use with UMA systems (includes replacement thermal material)

531211-001 Cable Kit

531212-001 Screw Kit

531213-001 Rubber Kit (includes 6 rubber feet)

531215-001 Power button board

531216-001 HD display panel for use only with 16-in display

531220-001 Fan/heat sink assembly for use with discrete systems (includes replacement thermal material)

531517-001 Plastics Kit

531866-001 USB board

532324-001 Celeron T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB)

533465-001 Power connector cable

534077-001 Display Cable Kit

534078-001 Display bezel for use only with 16-in HP G61 computer models (includes microphone and webcam)

534084-001 Celeron T1700 1.83-GHz processor (1-MB L2 cache, 667-MHz FSB)

534419-001 Celeron 900 2.20-GHz processor (1-MB L2 cache, 667-MHz FSB)

534992-001 Display bezel for use only with 15.6-in HP G61 computer models (includes microphone)

Maintenance and Service Guide 3–19

(Continued)

Page 43

Illustrated parts catalog

Spare part number Description number

534993-001 Display bezel for use with 15.6-in Presario CQ-61 computer models (includes microphone and

534994-001 Display bezel for use with 16-in Presario CQ-61 computer models (includes microphone and webcam)

534995-001 Display bezel for use only with 15.6-in Presario CQ-61 computer models (includes microphone)

537850-001 Power connector cable

537851-001 TouchPad on/off button board (includes cables)

537852-001 TouchPad

570246-001 GL40 UMA system board for use with select UMA computer models (includes built-in modem, Digital

572082-001 Speakers (include left and right speakers and cables) for use in India only

573076-001 Intel Core2 Duo P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB)

572928-001 Intel Core2 Duo T6500 2.10-GHz processor (3-MB L2 cache, 1066-MHz FSB)

webcam)

Media Slot, HDMI port and replacement thermal material)

3–20 Maintenance and Service Guide

Page 44

Removal and replacement procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

■ Flat-bladed screwdriver

■ Magnetic screwdriver

■ Phillips P0 and P1 screwdrivers

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

As you remove each subassembly from the computer, place the subassembly (and all accompanying screws)

✎

away from the work area to prevent damage.

Plastic parts

CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the

plastic parts. Apply pressure only at the points designated in the maintenance instructions.

Cables and connectors

CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly

process. Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.

Maintenance and Service Guide 4–1

Page 45

Removal and replacement procedures

Drive handling

CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions:

■ Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in

Hibernation, turn the computer on, and then shut it down through the operating system.

■ Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid touching the

connector.

■ Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure that the optical

drive tray is closed.

■ Handle drives on surfaces covered with at least one inch of shock-proof foam.

■ Avoid dropping drives from any height onto any surface.

■ After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.

■ Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.

■ Avoid exposing a drive to temperature extremes or liquids.

■ If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging and label

the package “FRAGILE.”

Grounding guidelines

Electrostatic discharge damage

Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions.

A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.

An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a normal cycle. Or the device may function normally for a while, then degrade in the internal layers, reducing its life expectancy.

CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these

precautions:

■ Keep components in their electrostatic-safe containers until you are ready to install them.

■ Use nonmagnetic tools.

■ Before touching an electronic component, discharge static electricity by using the guidelines described in this section.

■ Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.

■ If you remove a component, place it in an electrostatic-safe container.

4–2 Maintenance and Service Guide

Page 46

The following table shows how humidity affects the electrostatic voltage levels generated by different activities.

CAUTION: A product can be degraded by as little as 700 V.

Event 10% 40% 55%

Walking across carpet 35,000 V 15,000 V 7,500 V

Walking across vinyl floor 12,000 V 5,000 V 3,000 V

Motions of bench worker 6,000 V 800 V 400 V

Removing DIPS from plastic tube 2,000 V 700 V 400 V

Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V

Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V

Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V

Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V

Packaging and transporting guidelines

Removal and replacement procedures

Typical electrostatic voltage levels

Relative humidity

Follow these grounding guidelines when packaging and transporting equipment:

■ To avoid hand contact, transport products in static-safe tubes, bags, or boxes.

■ Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.

■ Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

■ Place items on a grounded surface before removing items from their containers.

■ Always be properly grounded when touching a component or assembly.

■ Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.

■ Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment

used for moving materials is wired to ground and that proper materials are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate electric charges.

Workstation guidelines

Follow these grounding workstation guidelines:

■ Cover the workstation with approved static-shielding material.

■ Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and

equipment.

■ Use conductive field service tools, such as cutters, screwdrivers, and vacuums.

■ When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials.

■ Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.

■ Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items

only at static-free workstations.

■ Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.

■ Turn off power and input signals before inserting or removing connectors or test equipment.

Maintenance and Service Guide 4–3

Page 47

Removal and replacement procedures

Equipment guidelines

Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.

■ When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a

minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a wrist strap.

■ When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at

standing workstations and are compatible with most types of shoes or boots. On conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the operator and ground. To be effective, the conductive strips must be worn in contact with the skin.

The following grounding equipment is recommended to prevent electrostatic damage:

■ Antistatic tape

■ Antistatic smocks, aprons, and sleeve protectors

■ Conductive bins and other assembly or soldering aids

■ Nonconductive foam

■ Conductive tabletop workstations with ground cords of one megohm resistance

■ Static-dissipative tables or floor mats with hard ties to the ground

■ Field service kits

■ Static awareness labels

■ Material-handling packages

■ Nonconductive plastic bags, tubes, or boxes

■ Metal tote boxes

■ Electrostatic voltage levels and protective materials

The following table lists the shielding protection provided by antistatic bags and floor mats.

Material Use Voltage protection level

Antistatic plastic Bags 1,500 V

Carbon-loaded plastic Floor mats 7,500 V

Metallized laminate Floor mats 5,000 V

4–4 Maintenance and Service Guide

Page 48

Component replacement procedures

This chapter provides removal and replacement procedures.

There are as many as 62 screws, in 7 different sizes, that must be removed, replaced, or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.

Service tag

When ordering parts or requesting information, provide the computer serial number and model number located on the service tag.

Removal and replacement procedures

Item Component Description

1 Product name This is the product name affixed to the front of the computer.

2 Serial number (s/n) This is an alphanumeric identifier that is unique to each product.

3 Part number/Product number (p/n) This number provides specific information about the product’s

4 Model description This is the alphanumeric identifier used to locate documents,

5 Warranty period This number describes the duration of the warranty period for the

Maintenance and Service Guide 4–5

hardware components. The part number helps a service technician to determine what components and parts are needed.

drivers, and support for the computer.

computer.

Page 49

Removal and replacement procedures

Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 531213-001. There are 6 rubber feet that attach to the base enclosure in the locations illustrated below.

4–6 Maintenance and Service Guide

Page 50

Battery

Removal and replacement procedures

Description Spare part number

6 cell, 2.20-Ah, 47-Wh battery 513775-001

Before disassembling the computer, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

Remove the battery:

1. Turn the computer upside down on a flat surface, with the battery bay toward you.

2. Slide the battery release latch 1 to release the battery.

3. Pivot the battery 2 upward and remove it 3 from the computer.

Install the battery by inserting it into the battery bay and pressing it down until you hear a click.

Maintenance and Service Guide 4–7

Page 51

Removal and replacement procedures

Optical drive

The optical drive spare part kit includes an optical drive bezel and optical drive bracket.

✎

Description Spare part number

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe 517850-001

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive 517852-001

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

Remove the optical drive:

1. Position the computer with the left side toward you.

2. Remove the Phillips PM2.5×7.0 screw 1 that secures the optical drive to the computer.

3. If needed, insert a thin tool, such as a paper clip 2, into the release access. (The disc tray is partially ejected from the optical drive.)

4. Grasp the bezel and slide the optical drive 3 out of the computer.

4–8 Maintenance and Service Guide

Page 52

Removal and replacement procedures

5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you.

6. Remove the 2 Phillips PM2.0×3.0 screws 1 that secure the optical drive bracket to the optical drive.

7. Remove the optical drive bracket 2.

Reverse this procedure to reassemble and install an optical drive.

Maintenance and Service Guide 4–9

Page 53

Removal and replacement procedures

Hard drive

The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and

✎

hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit.

Description Spare part number

500-GB, 5400-rpm hard drive 517848-001

320-GB, 5400-rpm hard drive 517847-001

200-GB, 5400-rpm hard drive 517846-001

160-GB, 5400-rpm hard drive 517845-001

Hard Drive Hardware Kit 531204-001

Before removing the hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

Remove the hard drive:

1. Loosen the 4 Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.

2. Lift the right side of the hard drive cover 2, swing it up and to the left, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 531517-001.

4–10 Maintenance and Service Guide

Page 54

Removal and replacement procedures

3. Remove the 2 Phillips PM2.5×7.0 screws 1 that secure the hard drive to the computer.

4. Grasp the Mylar tabs 2 on the hard drive, and then slide the hard drive to the left to disconnect it from the system board 3.

5. Remove the hard drive 4 from the hard drive bay.

6. If it is necessary to replace the hard drive bracket, remove the 2 Phillips PM3.0×4.0 hard drive bracket screws 1 from each side of the hard drive.

7. Grasp the 2 attached Mylar tabs 2 and pull the bracket straight up to remove it from the hard drive.

Reverse this procedure to reassemble and install the hard drive.

Maintenance and Service Guide 4–11

Page 55

Removal and replacement procedures

RTC battery

Description Spare part number

RTC battery 449729-001

Before removing the battery, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (“Battery” on page 4-7).

5. Remove the hard drive cover (see “Hard drive” on page 4-10).

Remove the RTC battery:

1. Use a sharp, non-conductive tool to release the clip 1 that secures the battery to the system board.

2. Lift the battery 2 out of the computer.

Reverse this procedure to install the RTC battery.

4–12 Maintenance and Service Guide

Page 56

Memory module

Description Spare part number

Memory module, 1-GB, PC2-6400 517843-001

Memory module, 2-GB, PC2-6400 517844-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove hard drive cover (see “Hard drive” on page 4-10).

Remove the memory module:

1. Spread the retaining tabs 1 away from the memory module. (The edge of the module opposite the slot rises away from the computer.)

Removal and replacement procedures

2. Remove the memory module 2 by pulling the module away from the slot at an angle.

Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory module slot.

✎

Reverse this procedure to install a memory module.

Maintenance and Service Guide 4–13

Page 57

Removal and replacement procedures

Wireless module

Description Spare part number

Atheros AR2425 802.11b/g WLAN module 459339-003

Atheros AR2425 802.11b/g WLAN module 459339-004

Broadcom BCM4312 802.11b/g WLAN module 459263-001

Broadcom BCM4312 802.11b/g WLAN module 459263-002

Atheros AR9280 802.11a/b/g/n WLAN module 482260-001

Atheros AR9280 802.11a/b/g/n WLAN module 482260-002

Intel Wi-F- 5100 802.11 a/b/g WLAN module 482957-001

Intel Wi-Fi 5100 802.11 a/b/g/n WLAN module 480985-001

Atheros 802.11 b/g/n WLAN module 518436-001

Atheros 802.11 b/g/n WLAN module 518436-002

Atheros 802.11 a/b/g/n WLAN module 518437-001

Atheros 802.11 a/b/g/n WLAN module 518437-002

Before removing the WLAN module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

4–14 Maintenance and Service Guide

Page 58

Removal and replacement procedures

Remove the wireless module:

CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the

computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support.

1. Loosen the Phillips PM2.5×6.0 captive screw 1 that secures the wireless compartment cover to the computer.

2. Lift the right side of the cover 2, swing it to the left, and lift up to remove it 3. The wireless compartment cover is included in the Plastics Kit, spare part number 531517-001.

3. Disconnect the main antenna cable 1 and the auxiliary antenna cable 2 from the wireless module.

The black WLAN antenna cable (marked “1”) is connected to the WLAN module “Main” terminal. The white

✎

WLAN antenna cable (marked “2”) is connected to the WLAN module “Aux” terminal.

4. Remove the Phillips PM2.0×3.0 screw 3 that secures the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.)

5. Remove the WLAN module 4 by pulling the module away from the slot at an angle.

WLAN modules are designed with a notch 5 to prevent incorrect insertion.

✎

Reverse this procedure to install the wireless module.

Maintenance and Service Guide 4–15

Page 59

Removal and replacement procedures

Modem

Description Spare part number

Modem 56K V.92 data/fax modem (select models only, for use in the United Sates) 510100-001

Modem 56K V.92 data/fax modem (select models only, for use in Australia) 510100-011

Before removing the modem, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7)

5. Remove the hard drive cover (see “Hard drive” on page 4-10).

Remove the modem:

1. Remove the 2 Phillips PM2.0×3.0 screws 1 that secure the modem to the computer.

2. Lift up the modem from the computer 2 and disconnect the modem cable 3 from the modem.

Reverse this procedure to install the modem.

4–16 Maintenance and Service Guide

Page 60

Keyboard

Description Spare part number

Keyboard for use in Belgium 517865-A41

Keyboard for use in Brazil 517865-201

Keyboard for use in Canada 517865-121

Keyboard for use in the Czech Republic 517865-221

Keyboard for use in France 517865-051

Keyboard for use in Germany 517865-041

Keyboard for use in Greece 517865-151

Keyboard for use in Hungary 517865-211

Keyboard for International use 517865-B31

Keyboard for use in Israel 517865-BB1

Keyboard for use in Italy 517865-061

Keyboard for use in Japan 517865-291

Keyboard for use in Norway 517865-091

Removal and replacement procedures

Keyboard for use in Latin America 517865-161

Keyboard for use in Portugal 517865-131

Keyboard for use in Russia 517865-251

Keyboard for use in Saudi Arabia 517865-171

Keyboard for use in South Korea 517865-AD1

Keyboard for use in Spain 517865-071

Keyboard for use in Switzerland 517865-111

Keyboard for use in Thailand 517865-281

Keyboard for use in Taiwan 517865-AB1

Keyboard for use in Turkey 517865-141

Keyboard for use in the United Kingdom 517865-031

Keyboard for use in the United States 517865-001

Before removing the keyboard, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (“Battery” on page 4-7).

5. Remove the hard drive cover (see “Hard drive” on page 4-10).

6. Remove the hard wireless module cover (see “Wireless module” on page 4-14).

Maintenance and Service Guide 4–17

Page 61

Removal and replacement procedures

Remove the keyboard:

1. Turn the computer upside down, with the front toward you.

2. Remove the 5 Phillips PM2.5×7.0 screws that secure the keyboard to the computer.

3. Turn the computer right-side up, with the front toward you.

4. Open the computer as far as possible.

5. Release the tabs along the left 1 and right 2 edges of the keyboard using a thin flat-bladed screwdriver.

6. Lift the rear edge of the keyboard 3, and rotate it forward until it rests upside down on the TouchPad.

4–18 Maintenance and Service Guide

Page 62

Removal and replacement procedures

7. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then disconnect the keyboard cable 2 from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.

Maintenance and Service Guide 4–19

Page 63

Removal and replacement procedures

Switch cover

Description Spare part number

Switch cover 531207-001

Before removing the switch cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (“Battery” on page 4-7).

5. Remove the hard drive (“Hard drive” on page 4-10).

6. Remove the wireless module (“Wireless module” on page 4-14).

7. Remove the keyboard (“Keyboard” on page 4-17).

Remove the switch cover:

1. In the battery bay, remove the 2 Phillips PM 2.5×8.0 screws 1, 6 Phillips PM2.5×7.0 screws 2, and the 5 Phillips PM2.5×5.0 screws 3 that secure the cover to the computer. The switch cover screws are identified by a triangle icon embossed on the base enclosure.

2. Turn the computer right-side up, with the front toward you.

3. Open the computer as far as possible.

4–20 Maintenance and Service Guide

Page 64

Removal and replacement procedures

4. Remove the Phillips PM2.5×6.0 screw 1 that secures the switch cover to the computer.

5. Release the ZIF connector cable 2 .

6. Slide the switch cover 3 toward the display panel until it disengages from the top cover, and then lift up to remove the switch cover.

Reverse this procedure to install the switch cover.

Maintenance and Service Guide 4–21

Page 65

Removal and replacement procedures

Power button board

Description Spare part number

Power button board 531215-001

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Disconnect the wireless antenna cables from the wireless module (see “Wireless module” on page 4-14).

6. Remove the keyboard (see “Keyboard” on page 4-17).

7. Remove the switch cover (see “Switch cover” on page 4-20).

Remove the power button board:

1. Disconnect the power button board cable 1 from the power button board.

2. Remove the Phillips PM2.0×3.0 screw 2 that secures the power button board to the switch cover.

3. Remove the power button board 3.

Reverse this procedure to install the power button board.

4–22 Maintenance and Service Guide

Page 66

Display assembly

Description Spare part number

16-inch High Definition, light-emitting diode display assembly for HP G61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

Removal and replacement procedures

530981-001

16-inch High Definition, light-emitting diode display assembly for Presario G61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

15.6-inch High Definition, light-emitting diode display assembly for Presario CQ61 computer models (includes microphone and cable, and logo)

15.6-inch High Definition, light-emitting diode display assembly for Presario CQ61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

15.6-inch High Definition, light-emitting diode display assembly for HP G61 computer models (includes microphone and cable, and logo)

15.6-inch High Definition, light-emitting diode display assembly for HP G61 computer models (includes webcam module and cable, 2 WLAN antenna transceivers and cables, microphone and cable, and logo)

530977-001

530979-001

530978-001

530983-001

530982-001

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Disconnect the wireless antenna cables from the wireless module (see “Wireless module” on page 4-14).

6. Remove the keyboard (see “Keyboard” on page 4-17).

7. Remove the switch cover (see “Switch cover” on page 4-20).

Maintenance and Service Guide 4–23

Page 67

Removal and replacement procedures

Remove the display assembly:

1. Pull the antenna cables through the opening in the top cover 1 and disengage the cables from the clip in the routing channel leading to the display hinge.

2. Disconnect the display panel cable 2 from the system board and remove it from its routing channel.

3. Disconnect the microphone cable 3 from the system board and release it from the clips that attach it to the top cover.

4. Remove the caps lock LED 4 from its mounting clips on the top cover.

4–24 Maintenance and Service Guide

Page 68

Removal and replacement procedures

CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can

result in damage to the display assembly and other computer components.

5. Remove the 4 Phillips PM2.5×7.0 screws 1 securing the display hinges to the computer.

6. Lift the display panel 2 straight up to remove it.

7. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the following screw covers and screws:

1 Two rubber screw covers on the display bezel bottom edge. The display rubber screw covers are included in the Display Rubber Kit, spare part number 530999-001.

2 Two Phillips PM2.5×7.0 screws on the display bezel bottom edge.

Maintenance and Service Guide 4–25

Page 69

Removal and replacement procedures

8. Flex the inside edges of the bezel at the top and bottom 1, and the left and right sides 2, until the bezel disengages from the display enclosure.

9. Remove the display bezel 3.

The following display bezels are available:

❏ For use only with 16-inch HP G61 computer models equipped with a webcam module and microphone,

spare part number 530478-001.

❏ For use only with 16-inch Presario CQ61 computer models equipped with a webcam module and

microphone, spare part number 534994-001.

❏ For use only with 15.6-inch HP G61 computer models equipped with a webcam module and microphone,

spare part number 530992-001.

❏ For use only with 15.6-inch HP G61 computer models equipped with a microphone, spare part number

534992-001.

❏ For use only with 15.6-inch Presario CQ61 computer models equipped with a webcam module and

microphone, spare part number 534993-001.

❏ For use only with 15.6-inch Presario CQ61 computer models equipped with a microphone, spare part

number 534995-001.

10. If it is necessary to replace the webcam module, lift the webcam module as far from the display enclosure as the webcam module cable allows.

11. Disconnect the webcam module cable 1 from the webcam module, and remove the webcam module 2. The webcam module is available using spare part number 531202-001.

4–26 Maintenance and Service Guide

Page 70

Removal and replacement procedures

12. If it is necessary to replace the display hinges, remove the 3 Phillips PM2.5×6.0 screws 1 that secure each hinge to the display enclosure.

13. Remove the display hinges 2. The display hinges are available in the Display Hinge Kit, spare part number 530993-001.

14. If it is necessary to replace the display panel, remove the 2 Phillips PM2.5×6.0 screws 1 that secure the display panel to the display enclosure.

15. Remove the display panel 2 from the display enclosure.

The following display panels are available:

❏ For use with 16-inch display, spare part number 531216-001

❏ For use with 15.6-inch display, spare part number 517842-001.

Maintenance and Service Guide 4–27

Page 71

Removal and replacement procedures

16. If it is necessary to replace the display panel brackets, remove the 2 Phillips PM2.0×3.0 screws 1 that secure each bracket to the display panel.

17. Remove the display panel brackets 2 from the display panel. The display panel brackets for the 16-inch display are available using spare part number 530996-001, and for the 15.6-inch display using spare part number 530995-001.

18. If it is necessary to replace the display panel cable, which is attached to the back of the display panel with clear adhesive tape, remove the tape 1 to release the cable from its connector. The display panel cable kit includes the camera module cable and is available using spare part number 534077-001.

19. Remove display panel cable 2.

4–28 Maintenance and Service Guide

Page 72

Removal and replacement procedures

20. If it is necessary to replace the microphone, release the microphone from its mounting clips 1.

21. Lift and remove the microphone cable 2. The microphone with cable is available using spare part number 531203-001.

Reverse this procedure to reassemble and install the display assembly.

Maintenance and Service Guide 4–29

Page 73

Removal and replacement procedures

Top cover

Description Spare part number

Top cover (includes TouchPad, and button board) 531206-001

Before removing the top cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

Remove the top cover:

1. Turn the computer upside down, with the front toward you.

2. Remove the 7 Phillips PM2.5×7.0 screws that secure the top cover to the computer.

4–30 Maintenance and Service Guide

Page 74

Removal and replacement procedures

3. Turn the computer right-side up, with the front facing you.

4. Remove the Phillips PM2.5×6.0 screw that secures the top cover to the computer.

5. Lift the rear edge of the top cover 1 until the top cover disengages from the base enclosure.

6. Release the LIF connector 2 for the two TouchPad cables from the system board .

7. Remove the top cover 3.

The TouchPad is glued to the top cover and is included with the top cover spare part.

✎

Reverse this procedure to install the top cover.

Maintenance and Service Guide 4–31

Page 75

Removal and replacement procedures

Audio board

Description Spare Part Number

Audio board (includes audio board cable) 531208-001

Before removing the audio board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

Remove the audio board:

1. Release the ZIF connector 1 to which the audio board cable is attached, and disconnect the audio board cable 2 from the system board.

2. Remove the Phillips PM2.5×6.0 screw 3 that secures the audio board to the base enclosure.

3. Remove the audio board 4.

Reverse this procedure to install the audio board.

4–32 Maintenance and Service Guide

Page 76

Speakers

Description Spare Part Number

Speakers for use in India only 572082-001

Speakers for use in all countries and regions except India 531209-001

Before removing the speakers, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

Removal and replacement procedures

and then shut it down through the operating system.

unplugging the AC adapter from the computer.

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive see (“Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

Remove the speakers:

1. Disconnect the speaker cable from the system board 1.

2. Remove the speakers 2.

Reverse this procedure to install the speakers.

Maintenance and Service Guide 4–33

Page 77

Removal and replacement procedures

USB board

Description Spare part number

USB board 531866-001

Before removing the USB board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive see (“Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

Remove the USB board:

1. Disconnect the USB board cable 1 from the system board.

2. Remove the Phillips PM2.5×60 screw 2 from the system board.

3. Lift the USB board 3 straight up to remove it from the computer.

Reverse this procedure to install a USB board.

4–34 Maintenance and Service Guide

Page 78

Bluetooth module

Description Spare Part Number

Bluetooth module 483113-001

Bluetooth module cable

Before removing the Bluetooth module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

Removal and replacement procedures

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

Remove the Bluetooth module:

1. Disconnect the Bluetooth module cable 1 from the system board.

2. Remove the Bluetooth module 2.

Reverse this procedure to install the Bluetooth module.

Maintenance and Service Guide 4–35

Page 79

Removal and replacement procedures

System board

The system board spare part kit includes UMA or discrete graphics subsystem memory, built-in modem, and

✎

replacement thermal material.

Description Spare part number

GM45 UMA system board (built-in modem, Digital Media Slot, and replacement thermal material) 517832-001

GM45 UMA system board (built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

GL40 UMA system board (built-in modem, Digital Media Slot, and replacement thermal material) 517836-001

GL40 UMA system board (built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

PM45 discrete system board (built-in modem, Digital Media Slot, HDMI port, and replacement thermal material)

PM45 discrete system board PM45 (built-in modem, Digital Media Slot, and replacement thermal material)

517839-001

517835-001

570246-001

517837-001

517838-001

Before removing the system board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board:

■ Memory module (see “Memory module” on page 4-13)

■ Wireless module (see “Wireless module” on page 4-14)

■ Fan/heat sink assembly (see “Fan/heat sink assembly” on page 4-38)

■ Processor (see “Processor” on page 4-42)

4–36 Maintenance and Service Guide

Page 80

Remove the system board:

1. Disconnect the USB board cable 1 from its mounting clip in the base enclosure.

2. Disconnect the Bluetooth cable 2 from the system board.

3. Disconnect the RJ-11 cable 3 from the system board.

4. Disconnect the power connector cable 4 from the system board.

Removal and replacement procedures

5. Remove the Phillips PM2.5×6.0 screw that secures the system board to the base enclosure.

6. Grasp the right edge 1 of the system board.

7. Lift the system board 2, and pull it away from the base enclosure 3 at an angle.

Reverse this procedure to install the system board.

Maintenance and Service Guide 4–37

Page 81

Removal and replacement procedures

Fan/heat sink assembly

Description Spare part number

Fan/heat sink assembly (includes replacement thermal material) for use only with computer models with UMA graphics subsystem memory

Fan/heat sink assembly (includes replacement thermal material) for use only with computer models with discrete graphics subsystem memory

531210-001

531220-001

Before removing the fan/heat sink assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

h. Bluetooth module (see “Bluetooth module” on page 4-35)

i. System board (see “System board” on page 4-36)

4–38 Maintenance and Service Guide

Page 82

Removal and replacement procedures

Remove the fan/heat sink assembly:

Due to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board

✎

components, you may need to move the fan/heat sink assembly from side to side to detach the assembly.

CAUTION: To avoid damage to the processor, loosen the fan/heat sink assembly screws in the sequence indicated on the heat

sink assembly. Likewise, tighten the screws in the same sequence when installing the fan/heat sink assembly.

Steps 1 through 4 apply only to computer models equipped with graphics subsystems having UMA memory.

✎

1. Turn the system board right-side up, with the front toward you.

2. Disconnect the fan cable 1 from the system board.

3. Following the 1, 2, 3 sequence stamped into the fan/heat sink assembly, loosen the 3 Phillips PM2.5×6.0 spring-loaded captive screws 2 that secure the fan/heat sink assembly.

4. Remove the fan/heat sink assembly 3 by lifting it straight up.

Maintenance and Service Guide 4–39

Page 83

Removal and replacement procedures

Steps 5 through 8 apply only to computer models equipped with graphics subsystems having discrete memory.

✎

5. Turn the system board right-side up, with the front toward you.

6. Disconnect the fan cable from the system board 1.

7. Loosen the 5 Phillips PM2.5×6.0 spring-loaded captive screws 2 that secure the fan/heat sink assembly.

8. Remove the fan/heat sink assembly 3 by lifting it straight up.

The following illustration shows the replacement thermal material locations for computer models graphics subsystems having UMA memory

The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system

✎

board components each time the fan/heat sink assembly is removed. Thermal grease is located on the section of the fan/heat sink assembly 1 that services the processor 2. A thermal pad is located on the section of the fan/heat sink assembly 3 that services the Northbridge chip 4. Replacement thermal grease and pads are included in spare parts kits for all system boards, fan/heat sink assemblies, and processors.

4–40 Maintenance and Service Guide

Page 84

Removal and replacement procedures

The following illustration shows the replacement thermal material locations for computer models equipped with graphics subsystems with discrete memory.

The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system

✎

board components each time the fan/heat sink assembly is removed. Thermal grease is located on the section of the fan/heat sink assembly 1 that services the processor 2. A thermal pad is located on the section of the fan/heat sink assembly 3 that services the Northbridge chip 4. Thermal pads are also located on intermediate sections of the fan/heat sink assembly 5 and 7 that service components 6 and 8 on the system board. Replacement thermal grease and pads are included with all system board, fan/heat sink assembly, and processor spare part kits.

Reverse this procedure to install the fan/heat sink assembly.

Maintenance and Service Guide 4–41

Page 85

Removal and replacement procedures

Processor

The processor spare part kit includes replacement thermal material.

✎

Description Spare part number

Intel Core2 Duo P8700 2.53-GHz processor (3-MB L2 cache) 507960-001

Intel Core2 Duo P7450 2.13-GHz processor (3-MB L2 cache) 507965-001

Intel Core2 Duo T6600 2.20-GHz processor (3-MB L2 cache) 513593-001

Intel Core2 Duo T6400 2.06-GHz processor (3-MB L2 cache) 513592-001

Intel Pentium T3400 2.16-GHz processor (1-MB L2 cache) 509549-001

Intel Pentium T4200 2.06-GHz processor (2-MB L2 cache) 531599-001

Intel Celeron-M 585 2.16-GHz processor (1-MB L2 cache) 519898-001

Intel Celeron T1700 1.83-GHz processor (1-MB L2 cache) 534084-001

Intel Celeron T1600 1.66-GHz processor (1-MB L2 cache) 532324-001

Before removing the processor, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the following components:

a. Remove the battery (see “Battery” on page 4-7)

b. Optical drive (see “Optical drive” on page 4-8)

c. Hard drive (see “Hard drive” on page 4-10)

d. Keyboard (see “Keyboard” on page 4-17)

e. Switch cover (see “Switch cover” on page 4-20)

f. Power button board (see “Power button board” on page 4-22)

g. Display assembly (see “Display assembly” on page 4-23)

h. Top cover (see “Top cover” on page 4-30)

i. Bluetooth module (see “Bluetooth module” on page 4-35)

j. System board (see “System board” on page 4-36)

k. Fan/heat sink assembly (see “Fan/heat sink assembly” on page 4-38)

4–42 Maintenance and Service Guide

Page 86

Removal and replacement procedures

Remove the processor:

1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you hear a click.

2. Lift the processor 2 straight up and remove it.

When you install the processor, the gold triangle on the processor 3 must be aligned with the triangle embossed

✎

on the processor slot 4.

Reverse this procedure to install the processor.

Maintenance and Service Guide 4–43

Page 87

Removal and replacement procedures

Power connector cable

Description Spare Part Number

Power connector cable 537850-001

Before removing the power connector cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

Remove the power connector cable.

1. To remove the power connector cable, disconnect the cable connector 1 from the system board.

2. Remove the power connector cable by lifting it straight up from the base enclosure 2.

Reverse this procedure to install the power connector cable.

4–44 Maintenance and Service Guide

Page 88

RJ-11 connector

Before removing the RJ-11 connector, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 4-7).

5. Remove the following components:

a. Optical drive (see “Optical drive” on page 4-8)

b. Hard drive (see “Hard drive” on page 4-10)

c. Keyboard (see “Keyboard” on page 4-17)

d. Switch cover (see “Switch cover” on page 4-20)

e. Power button board (see “Power button board” on page 4-22)

f. Display assembly (see “Display assembly” on page 4-23)

g. Top cover (see “Top cover” on page 4-30)

Removal and replacement procedures

Maintenance and Service Guide 4–45

Page 89

Removal and replacement procedures

Remove the RJ-11 connector

1. Remove the 2 screws 1 that secure the modem to the base enclosure.

2. Lift the modem 2 up, and then disconnect the RJ-11 connector cable 3.

3. Remove the cable from the clips 1, and then lift the connector straight up 2 and out of the computer.

Reverse this procedure to install the RJ-11 connector.

4–46 Maintenance and Service Guide

Page 90

Starting Setup Utility

The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows® operating system is not working.

The fingerprint reader (select models only) cannot be used to access the Setup Utility.

✎

The utility reports information about the computer and provides settings for startup, security, and other preferences.

To start the Setup Utility:

CAUTION: Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu”

message is displayed in the lower-left corner of the screen, press f10.

– or –

1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press

Setup Utility

esc.

2. When the Startup Menu is displayed, press

f10.

Changing the language of the Setup Utility

The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.

1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press

– or –

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press displayed, press

2. Use the arrow keys to select System Configuration > Language, and then press

3. Use the arrow keys to select a language, and then press

4. When a confirmation prompt with your language selected is displayed, press

5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then press

Your change goes into effect immediately.

f10.

enter.

f10.

esc. When the Startup Menu is

enter.

Maintenance and Service Guide 5–1

Page 91

Setup Utility

Navigating and selecting in the Setup Utility

Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are by keystroke.

■ To choose a menu or a menu item, use the arrow keys.

■ To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or

f5 or f6.

■ To select an item, press enter.

■ To close a text box or return to the menu display, press esc.

■ To display additional navigation and selection information while the Setup Utility is open, press f1.

Displaying system information

The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.

1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press

– or –

f10.

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press displayed, press

2. Select the Main menu. System information such as the system time and date, and identification information about the computer is displayed.

3. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding Changes, and then press

f10.

enter.

Restoring default settings in Setup Utility

The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.

1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press

– or –

Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen, press displayed, press

2. Use the arrow keys to select Exit > Load Setup Defaults, and then press

3. When the Setup Confirmation is displayed, press

4. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and then press

f10.

enter.

esc. When the Startup Menu is

f10.

esc. When the Startup Menu is

enter.

The Setup Utility default settings go into effect when the computer restarts.

Your password, security, and language settings are not changed when you restore the factory default settings.

✎

5–2 Maintenance and Service Guide

Page 92

Exiting Setup Utility

You can exit the Setup Utility with or without saving changes.

■ To exit the Setup Utility and save your changes from the current session:

Setup Utility

If the Setup Utility menus are not visible, press select Exit > Exit Saving Changes, and then press

■ To exit the Setup Utility without saving your changes from the current session:

If the Setup Utility menus are not visible, press select Exit > Exit Discarding Changes, and then press

After either choice, the computer restarts in Windows.

Setup Utility menus

The menu tables in this section provide an overview of Setup Utility options.

Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.

✎

Main menu

Select To do this

System information ■ View and change the system time and date.

esc to return to the menu display. Then use the arrow keys to

enter.

esc to return to the menu display. Then use the arrow keys to

enter.

■ View identification information about the computer.

■ View specification information about the processor, memory size, system

BIOS, and keyboard controller version (select models only).

Security menu

Select To do this

Administrator password Enter, change, or delete an administrator password.

Power-On Password Enter, change, or delete a power-on password.

Maintenance and Service Guide 5–3

Page 93

Setup Utility

System Configuration menu

Select To do this

Language Support Change the Setup Utility language.

Button Sound (select models only) Enable/disable the capacitive button tapping sound.

Virtualization Technology (select models only)

Processor C6 State (select models only) Enable/disable the processor C6 sleep state.

LAN Power Saving (select models only) Enable/disable LAN Power Saving. When enabled, saves power when the

Card Reader/1394 Power Saving (select models only)

Fan Always On Enabled/disable Fan Always On. When enabled, the computer fan will

Boot Options Set the following boot options:

Enable/disable the processor Virtualization Technology.

computer is in DC mode.

Enable/disable Card Reader/1394 Power Saving. When enabled, saves power when the computer is in DC mode.

always be on.

■ f9 and f10 Delay (sec.)—Set the delay for the f9 and f10 functions of the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).

■ CD-ROM boot—Enable/disable boot from CD-ROM.

■ Floppy boot—Enable/disable boot from diskette.

■ Internal Network Adapter boot—Enable/disable boot from Internal Network

Adapter.

■ Boot Order—Set the boot order for:

❐ USB Floppy ❐ Internal CD/DVD ROM Drive ❐ Processor C6 sleep state (select models only) ❐ USB CD/DVD ROM drive ❐ Hard drive ❐ USB Diskette on Key ❐ USB Hard drive ❐ Network adapter

Diagnostics menu

Select To do this

Hard Disk Self Test Run a comprehensive self-test on the hard drive.

Secondary Hard Disk Self Test (select models only)

Memory Test Run a diagnostic test on the system memory.

5–4 Maintenance and Service Guide

On models with two hard drives, this menu option is called the

✎

Primary Hard Disk Self Test.

Run a comprehensive self-test on a secondary hard drive.

Page 94

Computer specifications

Metric U.S.

Dimensions

Width 37.8 cm 14.9 in

Depth 25.2 cm 9.9 in

Height (front) 3.51 cm 1.39 in

Height (rear 4.12 cm 1.62

Weight

Equipped with 6-cell battery and optical drive 2.75 kg 6.06 Ibs

Input power

Operating voltage 18.5 V dc @ 3.5 A - 65 W or 19.0 V dc @ 4.74 A - 90 W

Specifications

Operating current 3.5 A or 4.74 A

Temperature

Operating (not writing to optical disc) 0°C to 35°C 32°F to 95°F

Operating (writing to optical disc) 5°C to 35°C 41°F to 95°F

Nonoperating -20°C to 60°C -4°F to 140°F

Relative humidity (noncondensing)

Operating 10% to 90% 10% to 90%

Nonoperating 5% to 95% 5% to 95%

Maximum altitude (unpressurized)

Operating -15 m to 3,048 m -50 ft to 10,000 ft

Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft

Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within this

✎

range of temperatures.

Maintenance and Service Guide 6–1

Page 95

Specifications

16-inch WXGA display specifications

Metric U.S.

Dimensions

Height 21.4 cm 8.4 in

Width 36.5 cm 14.4 in

Diagonal 40.6 cm 16 in

Number of colors Up to 16.8 million

Contrast ratio 600:1

Brightness 200 nits typical

Pixel resolution

Pitch 0.259 x 0.259 mm

Format 1366 x 900

Configuration RGB vertical strip

Backlight CCFT

Character display 80 x 25

Total power consumption 6.5 w

Viewing angle +/-45° horizontal, +15/-35 vertical typical

15.6-inch WXGA display specifications

Metric U.S.

Dimensions

Height 21.0 cm 8.27 in

Width 35.9 cm 14.1 in

Diagonal 39.51 cm 15.6 in

Number of colors Up to 16.8 million

Contrast ratio 500:1

Brightness 200 nits typical

Pixel resolution

Pitch 0.259 x 0.259 mm

Format 1368 x 768

Configuration RGB vertical strip

Backlight CCFT

Character display 80 x 25

Total power consumption 6.5 w

Viewing angle +/-45° horizontal, +15/-35 vertical typical

6–2 Maintenance and Service Guide

Page 96

Hard drive specifications

Dimensions

Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm

Width 70 mm 70 mm 70 mm 70 mm

Weight 101 g 101 g 101 g 101 g

Interface type SATA SATA S ATA S ATA

Transfer rate 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec

Security ATA security ATA security ATA security ATA security

Seek times (typical read, including setting)

Single track 3 ms 3 ms 3 ms 3 ms

Average 13 ms 13 ms 13 ms 13 ms

Maximum 24 ms 24 ms 24 ms 24 ms

Logical blocks 976, 773, 168 625,142, 448 488, 376,120 312, 560, 340

Disc rotational speed 5400 rpm 5400 rpm 5400 rpm 5400 rpm

Operating temperature 5°C to 55°C (41°F to 131°F)

Specifications

500-GB* 320-GB* 250-GB* 160-GB*

*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly.

Certain restrictions and exclusions apply. Contact technical support for details.

✎

Maintenance and Service Guide 6–3

Page 97

Specifications

DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe specifications

Applicable disc Read: Write:

CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD (Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DV D-5, DVD- 9, DVD -10 , DVD-18), DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-system memory

Access time CD DVD

Random < 175 ms < 230 ms

Cache buffer 2 MB

Data transfer rate

24X CD-ROM 3,600 KB/sec

8X DVD 10,800 KB/sec

24X CD-R 3,600 KB/sec

16X CD-RW 2,400 KB/sec

8X DVD+R 10,800 KB/sec

4X DVD+RW 5,400 KB/sec

8X DVD-R 10,800 KB/sec

CD-R and CD-RW

DVD+R, DVD+RW, DVD-R, DVD -RW, DVD- sys tem memory

4X DVD-RW 5,400 KB/sec

2.4X DVD+R(9) 2,700 KB/sec

5X DVD-system memory 6,750 KB/sec

6–4 Maintenance and Service Guide

Page 98

Specifications

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive specifications

Applicable disc Read: Write:

Access time BD DVD

Random < 230 ms < 180 ms

Cache buffer 4.5 MB

Data transfer rate

2X BD-system memory 9 MB/sec

8X DVD 2,400 KB/sec

16X CD-R 2,400 KB/sec

16X CD-RW 2,400 KB/sec

System DMA specifications

BD-ROM, BD-ROM-DL, BD-R, BD-R-DL, BD-RE, BD-RE-DL, DVD-ROM, DVD+R, DVD+R-DL, DVD+RW, DVD-R, DVD-R-DL, DVD-RW, DVD-system memory (Ver.2), CD-DA, CD-ROM (Mode 1 and mode 2), CD-ROM XA (Mode 2, form 1 and form 2), Photo CD (Single and multiple sessions), CD Extra, CD-R, CD-RW, and CD-TEXT

DVD-system memory (Ver.2), DVD+R, DVD-R, CD-R, and CD-RW

Hardware DMA System function

DMA0 Not applicable

DMA1* Not applicable

DMA2* Not applicable

DMA3 Not applicable

DMA4 Direct memory access controller

DMA5* Available for PC Card

DMA6 Not assigned

DMA7 Not assigned

*PC Card controller can use DMA 1, 2, or 5.

Maintenance and Service Guide 6–5

Page 99

Specifications

System interrupt specifications

Hardware IRQ System function

IRQ0 System timer

IRQ1 Standard 101-/102-Key or Microsoft® Natural Keyboard

IRQ2 Cascaded

IRQ4 COM1

IRQ6 Diskette drive

IRQ7* Parallel port

IRQ8 System CMOS/real-time clock

IRQ9* Microsoft ACPI-compliant system

IRQ12 Synaptics PS/2 TouchPad

IRQ13 Numeric data processor

IRQ14 Primary IDE channel

IRQ15 Secondary IDE channel

*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.

PC Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port

✎

may assert IRQ3 or IRQ4.

System I/O address specifications

I/O address (hex) System function (shipping configuration)

000 - 00F DMA controller no. 1

010 - 01F Unused

020 - 021 Interrupt controller no. 1

022 - 024 Opti chipset configuration registers

025 - 03F Unused

02E - 02F 87334 “Super I/O” configuration for CPU

040 - 05F Counter/timer registers

044 - 05F Unused

060 Keyboard controller

061 Port B

062 - 063 Unused

064 Keyboard controller

065 - 06F Unused

070 - 071 NMI enable/RTC

072 - 07F Unused

080 - 08F DMA page registers

090 - 091 Unused

6–6 Maintenance and Service Guide

(Continued)

Page 100

I/O address (hex) System function (shipping configuration)

092 Port A

093 - 09F Unused

0A0 - 0A1 Interrupt controller no. 2

I/O Address (hex) System Function (shipping configuration)

0A2 - 0BF Unused

0C0 - 0DF DMA controller no. 2

0E0 - 0EF Unused

0F0 - 0F1 Coprocessor busy clear/reset

0F2 - 0FF Unused

100 - 16F Unused

170 - 177 Secondary fixed disk controller

178 - 1EF Unused

1F0 - 1F7 Primary fixed disk controller

1F8 - 200 Unused

201 JoyStick (decoded in ESS1688)

Specifications

202 - 21F Unused

220 - 22F Entertainment audio

230 - 26D Unused

26E - 26 Unused

278 - 27F Unused

280 - 2AB Unused

2A0 - 2A7 Unused

2A8 - 2E7 Unused

2E8 - 2EF Reserved serial port

2F0 - 2F7 Unused

2F8 - 2FF Infrared port

300 - 31F Unused

320 - 36F Unused

370 - 377 Secondary diskette drive controller

378 - 37F Parallel port (LPT1/default)

380 - 387 Unused

388 - 38B FM synthesizer-OPL3

38C - 3AF Unused

3B0 - 3BB VGA

3BC - 3BF Reserved (parallel port/no EPP support)

3C0 - 3DF VGA

3E0 - 3E1 PC Card controller in CPU

3E2 - 3E3 Unused

Maintenance and Service Guide 6–7

(Continued)

HP Presario G61-511, Presario GQ61-300, Presario GQ61-100, Presario GQ61-200, Compaq Presario CQ61 Maintenance And Service Manual

Specifications and Main Features

Frequently Asked Questions

User Manual