HP Pavilion mx90 19 User Manual [en, es, fr]

HP Pavilion

MX50, MX70, and MX90

Multimedia Monitors

English

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 1 of 40 Printed: 12/15/00 02:51 PM

The information in this document is subject to change without notice.

Hewlett-Packard® Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

HP shall not be liable for errors contained herein or for incidental or consequential damages in conntion with the furnishing, performance, or use of this material.

HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of HP.

Hewlett-Packard Company Home Products Division P.O. Box 4010 Cupertino, CA 95015-4010 USA

Hewlett-Packard is a registered trademark of Hewlett-Packard Company in the United States of America and other countries.

Other brand or product names are trademarks of their respective holders.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 2 of 40 Printed: 12/15/00 02:51 PM

Contents

Introduction ......................................... 1

For Your Safety ................................................. 1

Additional Safety Information ............................. 3

AC Power Safety Warning ................................. 3

Installation........................................... 3

Locating the Monitor ......................................... 3

Connecting the Power and Video Cables............. 4

Connecting the Speakers ................................... 5

Using the Monitor ................................6

Turning the Monitor On and Off ......................... 6

Degaussing the Display ..................................... 7

Setting the Screen Resolution.............................. 7

Selecting Refresh Rate ....................................... 8

English

Minimizing Energy Use ..................................... 8

Cleaning the Screen ......................................... 8

Adjusting the Viewing Angle.............................. 9

Changing Display Settings.................... 9

Using the Front Panel ........................................ 9

Pre-Set Contrast Modes ................................... 10

Setting a Pre-Set Contrast Mode ....................... 10

Changing Mode Settings................................. 11

Adjusting Brightness and Contrast Directly......... 12

Using the OSD Main Window ......................... 12

Using the Size & Position Window ................... 15

Using the Advanced Geometry Window ........... 16

Using the OSD Advanced Menu Window ......... 17

Choosing the Color Temperature ...................... 19

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 3 of 40 Printed: 12/15/00 02:51 PM

iii

Setting Red, Green, and Blue Values................. 20

Choosing a Language..................................... 21

Choosing the OSD Position.............................. 22

Adjusting the Moiré Filters ............................... 23

Using the Status Window ................................ 24

Restoring Factory Adjustments.......................... 24

Technical Information .........................25

Monitor Information ........................................ 25

Pre-Set Video Modes....................................... 27

Pin Assignments ............................................. 28

DPMS Power Management Features ................. 29

Regulatory Information ......................31

Declaration of Conformity ................................31

FCC Statement ................................................32

X-Ray Radiation Notice ....................................33

General Notice...............................................33

DOC Statement (Canada Only) ........................33

EMI Statement (European Union Only) ...............33

Declaration of VCCI Class B Compliance ...........33

Index .................................................34

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 4 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Introduction

The HP Pavilion MX50, MX70, and MX90 Multimedia Monitors (Models P1282A, P1283A, and P1284A) are high-resolution color monitors designed for use with HP Pavilion and other PCs. Each monitor includes a built-in microphone and mounts for speakers supplied by HP Pavilion. The monitors comply with Environmental Protection Agency (EPA) ENERGY STAR include automatic power management features.

Other features include:

On-screen adjustment of display settings

Support for high refresh rates to reduce screen flicker and eyestrain

Built-in tilt and swivel base

standards and

The following illustrates a front view of your HP Pavilion monitor.

Microphone

Control Panel

Panel Button

For Your Safety

For your safety and the protection of your monitor, follow these procedures:

Always connect the monitor to a grounded, three-prong power outlet. Use only the factorysupplied power cord.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 1 of 40 Printed: 12/15/00 02:51 PM

Warning:

power from the monitor you must remove the power cable

To prevent electrical shock, do not remove the

To completely disconnect

from the power socket.

back cover of the monitor. Only qualified service personnel should remove the cover.

Do not place objects on top of the monitor that could fall into the vents or block airflow.

To avoid the risk of damage to the monitor and electrical shock to yourself, do not expose the monitor to rain or moisture.

Adjust only those controls with operations that are covered in this manual. Improperly adjusting other controls can result in damage and could require repair by a service technician.

If any of the following conditions occur, unplug the monitor and contact a qualified service technician:

The power cord or plug is frayed or damaged.

You have spilled liquid into the monitor.

The monitor has been exposed to rain or water.

The monitor does not operate correctly when the operating instructions are followed.

The monitor has been dropped or the cabinet has been damaged.

The performance of the monitor changes abruptly.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 2 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Additional Safety Information

Installation

These products have been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to earth, according to IEC950).

AC Power Safety Warning

Warning:

outlet. The AC power cord is your HP monitor’s main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your system has a grounded plug. Always use the power cord with a properly grounded wall outlet to avoid the risk of electrical shock.

Locate the monitor near an A

Follow the instructions in this chapter to install your HP Pavilion MX50, MX70, or MX90 Multimedia Monitor.

Note:

Warning:

objects. Exercise caution, or get help when lifting, to prevent back injury.

Before installing the monitor, refer to your PC and video adapter documentation. You may need to make changes to accommodate the monitor.

The MX monitors are heavy

Locating the Monitor

Place the monitor on a flat, sturdy surface. Choose an area that is free from excessive heat, moisture, and sunlight. Locate the monitor as far as possible from sources of electromagnetic interference, such as transformers, motors, fluorescent lighting, and other PC monitors.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 3 of 40 Printed: 12/15/00 02:51 PM

Connecting the Power and Video Cables

Before connecting any cables, be sure to read the safety instructions at the beginning of this manual. The PC and monitor must be turned off.

To connect the power and video cables:

Connect the power cord to the back of the monitor.

Plug the power cord into a power outlet.

Connect the blue plug on the video cable to the video port of your PC. If you have an HP Pavilion PC, this port is marked in blue. However, on some Pavilion PCs, the port could be marked in orange. (The illustration below is for reference only. Check your PC user’s guide for the video port location.)

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 4 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Insert the pink microphone cable plug into the sound input connector on the back of your PC. If you have an HP Pavilion PC, the connector is marked in pink. However, on some Pavilion PCs, the connection could be marked in yellow.

Connecting the Speakers

The monitor is designed for use with the Polk Audio speakers supplied by HP.

Extend the cables attached to the two speakers.

Identify the left and right speakers. You can tell which side of the monitor a speaker fits onto by observing its curvature and mounting pegs. Not all speakers have mounting pegs. If you don't have mounting pegs, skip to step 5. The side of the speaker with mounting pegs fits flush against the side of the monitor.

Insert the pegs of the right speaker into the corresponding slots on the right side of the monitor. Push down, sliding the speaker pegs completely into the slots.

Insert the pegs of the left speaker into the corresponding slots on the left side of the monitor. Push down, sliding the speaker pegs completely into the slots.

Refer to your PC user’s guide for instructions on how to connect your speakers to the PC.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 5 of 40 Printed: 12/15/00 02:51 PM

Using the Monitor

This chapter contains information about using the HP Pavilion MX50, MX70, or MX90 Multimedia Monitors.

Because of the monitor’s power management features, you don’t normally need to turn off the monitor when it’s not in use. When turned off, the monitor uses the same amount of power that it uses in Sleep mode (less than 5 watts).

Turning the Monitor On and Off

Use the Power button on the front panel to turn the monitor on and off. When the monitor is on, the light near the Power button is illuminated. The light is green when the monitor and PC are active and yellow/amber when the monitor is in one of its reduced power modes.

The monitor’s power management features reduce power consumption to low levels when your PC has been inactive for a specified period of time. See “Minimizing Energy Use” on page 8 for more information.

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

If your PC doesn’t support DPMS power management, you can reduce power consumption by turning off the monitor when it won’t be used for an extended period. You can turn the monitor off even if you leave the PC running.

Warning:

power from the monitor, you must remove the power cord from the AC power outlet or surge protector.

To completely disconnect

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 6 of 40 Printed: 12/15/00 02:51 PM

Degaussing the Display

Setting the Screen Resolution

Degaussing removes magnetism that causes unwanted color variations. Degauss the display any time you notice unusual color variations.

Note:

Do not degauss more frequently than once every 30 minutes, or the degauss will be incomplete. It is not necessary to degauss unless you have moved the monitor.

There are two degaussing methods. Each time you turn on the monitor, it is automatically degaussed. You can also use the Degauss option in the on-screen display (OSD) main window to degauss the display.

See “Using the OSD Main Window” on page 12 for instructions.

The screen resolution determines the amount of information shown in the display. Screen resolution refers to the number of dots or

pixels

used to make up an image. A low screen resolution means that the display uses a relatively small number of relatively large dots. A higher resolution means that more dots of a smaller size make up the image. With higher screen resolutions, icons, windows, and text are smaller on the screen, but more information can be displayed.

Use the Window’s Control Panel to set the screen resolution. The monitor supports many common screen resolutions, as shown in the “Pre-Set Video Modes.”

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 7 of 40 Printed: 12/15/00 02:51 PM

Selecting Refresh Rate

To minimize eyestrain and maximize the performance of your display, use the highest possible image refresh rate or vertical frequency for which you don’t perceive flicker (generally at or above 75 Hz for most users). The image refresh rate is the number of times per second that the image is refreshed. The “Pre-Set Video Modes” table shows the image refresh rates supported by the monitors at different screen resolutions.

The monitor supports three different power-saving modes — Standby, Suspend, and Sleep. See “DPMS Power Management Features” for a description of the characteristics of each mode.

When the monitor is in one of its power-saving modes, the screen is blanked out and the front panel power indicator is yellow/amber. Consult your PC user’s guide for information about setting the power-saving modes.

Cleaning the Screen

Minimizing Energy Use

To clean the screen:

HP Pavilion PCs support VESA Display Power Management Signaling (DPMS). Power Management features reduce the monitor’s power consumption after a period of keyboard inactivity.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 8 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Turn off and unplug the monitor.

Spray a soft cotton cloth with regular household glass cleaner, and then gently wipe the screen.

Warning:

containing fluoride, acids, or alkalis. Never use hard or abrasive cleaning products to clean the screen.

Dry the screen with a soft cotton cloth.

Plug in the monitor and turn it on.

Don’t use cleaning solutions

Changing Display Settings

Use the on-screen display (OSD) features of the monitor to change settings. The buttons on the front panel control on-screen icons and windows.

Using the Front Panel

English

Adjusting the Viewing Angle

The monitor’s pedestal mounting enables you to adjust the viewing angle. You can tilt and swivel the monitor to find the most comfortable viewing position.

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Use the six buttons on the front of the monitor to control OSD functions.

MODE

The Mode button opens the Contrast Mode window and allows you to choose from the monitor’s pre-set modes. See “Pre-Set Contrast Modes” on page 10, for instructions.

The Brightness button opens and closes the Brightness Adjustment window.

The Contrast button opens and closes the Contrast Adjustment window.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 9 of 40 Printed: 12/15/00 02:51 PM

SELECT

The Select button opens the OSD Main window if no other OSD windows are displayed. In the OSD Main window, the Select button opens the adjustment bar for the selected icon, or the corresponding window. When the Brightness or Contrast Adjustment bar is on the screen, the Select button closes the bar and saves the value.

The Minus button decreases a setting if an adjustment window is open. In a window, the button moves the pointer upward through the icon menu.

The Plus button increases a setting if an adjustment window is open. In a window, the button moves the pointer downward through the icon menu.

Two pre-set contrast modes are provided:

Text mode is designed for best results in lower ambient lighting environments and with applications like word processors and spreadsheets. This is a lower contrast setting.

Benefit:

and improved focus.

Video/Games mode offers higher contrast appropriate for viewing fullmotion video, and for photographic and pre-press applications.

Benefit:

vivid images, and maximum visual impact with games and video.

Eye comfort, less fatigue,

Higher contrast for vibrant,

Pre-Set Contrast Modes

Pre-set contrast modes enable you to quickly change contrast settings to match those

Setting a Pre-Set Contrast Mode

Press the Mode button on the front of the monitor. The Contrast Mode window opens.

commonly used for various activities and viewing conditions.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 10 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

CONTRAST MODE

Changing Mode Settings

TEXT

VIDEO/GAMES

To select a mode, press the Mode button again, or press the Plus (+) or Minus (–) button.

When the icon for the monitor mode you want is highlighted, press the Select button. The Contrast Mode window closes.

The pre-set contrast modes are the overall, master settings for brightness, contrast, and other image settings. You may make further adjustments to the image settings by using the OSD.

If you turn off the monitor, the last used mode is active when you turn it back on.

Changes to color temperature are independent of the contrast mode setting — the two modes will function the same way with any color setting.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 11 of 40 Printed: 12/15/00 02:51 PM

Adjusting Brightness and Contrast Directly

You can change the display’s brightness or contrast quickly by pressing the Brightness or Contrast button. Brightness adjusts the black level, while contrast adjusts the difference between the dark and light parts of the image.

BRIGHTNESS

Press the Plus (+) or Minus (–) button to

increase or decrease the setting from its current position.

Adjust the brightness level so that black items on the screen appear black. Then adjust the contrast for the most comfortable viewing.

To adjust the brightness or contrast:

Press the Brightness or Contrast button on the front panel to open the Brightness Adjustment window, or the Contrast Adjustment window.

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

When the brightness or contrast is at the desired level, press the Brightness or Contrast button again to close the adjustment window.

Using the OSD Main Window

The OSD Main window enables you to make changes to a variety of display settings. You open the window by pressing the Select button when no other OSD windows are displayed on the screen.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 12 of 40 Printed: 12/15/00 02:51 PM

BRIGHTNESS

CONTRAST

800 X 600 / 85 Hz

In the OSD Main window, the following functions are available:

Brightness

level in the image.

Adjusts the luminance

English

EXIT

ZOOM

SIZE & POSITION

ADVANCED GEOMETRY

ADVANCED MENU

DEGAUSS

EXIT

Contrast

Adjusts the difference in luminance between light and dark areas of the image.

Zoom

Increases or decreases the size

of an image in both directions.

Size and Position

Opens the Size &

Position window.

Advanced Geometry

Advanced Geometry window.

Advanced Menu

Opens the

Advanced Menu window.

restores image quality.

Exit

Degauss

EXIT

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

and saves any changes you have made.

Degausses the display and

Closes the OSD Main window

Opens the

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 13 of 40 Printed: 12/15/00 02:51 PM

If you select the icons for

Contrast

, or

Zoom

Brightness

, an adjustment bar appears below the OSD window. You shorten or lengthen the adjustment bar with the Plus (+) or Minus (–) button. A number next to the control bar shows the percentage of the current setting relative to its maximum value.

To use the OSD Main window:

Press the Select button on the front of the monitor to open the OSD Main window.

Press the Plus (+) or Minus (–) button to move among the icons in the window.

When the icon for the function you want is highlighted, press the Select button.

If you select the

Degauss

Exit

option,

the option takes effect immediately.

If you select the icons for

Contrast

, or

Zoom

Brightness

, an adjustment bar

appears.

If you select any other option, another window appears.

If an adjustment bar appears, press the Plus (+) or Minus (–) button to change the current setting, and then press the Select button to save your changes and close the adjustment bar.

To close the OSD Main window, select the

Note:

Exit

icon.

Only a highlighted icon, and the Reset and Exit icons, will display a descriptive text.

EXIT

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 14 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Using the Size & Position Window

The Size & Position window allows you to adjust the horizontal and vertical size and position of an image.

To open the Size & Position window, select the OSD Main window.

Size & Position

icon in the

SIZE & POSITION

H-SIZE

English

H-POSITION

V-SIZE

V-POSITION

ADVANCED GEOMETRY

RESET

EXIT

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 15 of 40 Printed: 12/15/00 02:51 PM

RESET

EXIT

In the Size & Position window, the following functions are available:

Using the Advanced Geometry Window

RESET

EXIT

H-Size

the image.

H-Position

position of the image.

V-Size

image.

V-Position

position of the image.

Advanced Geometry

Advanced Geometry window. See “Using the OSD Advanced Geometry Window” on page 16.

Reset

Position window and the Advanced Geometry window (except rotation) to factory settings.

Exit

window, saves any changes you have made, and opens the Main window.

Adjusts the horizontal size of

Adjusts the horizontal

Adjusts the vertical size of the

Adjusts the vertical

Opens the

Resets the values for the Size &

Closes the Size & Position

The Advanced Geometry window allows you to correct the shape and position of an image beyond the basic vertical and horizontal sizing and positioning that you can do in the Size & Position window.

To open the Advanced Geometry window, select the

Geometry

icon in the OSD Main

Advanced

window.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 16 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

ADVANCED GEOMETRY

SIDE PIN

Trapezoid

Makes the vertical sides

parallel to each other.

PIN BALANCE

TRAPEZOID

PARALLELOGRAM

ROTATION

RESET

EXIT

In the Advanced Geometry window, the following functions are available:

Side-Pin

bowing of both sides of the image.

Pin Balance

right side of the image when only one side of the image is bowed.

Adjusts any tapering or

Straightens the left or

Parallelogram

Rotation

Adjusts the angle of the

Squares the image.

image (MX70 and MX90 only).

Reset

Returns all advanced geometry

RESET

settings, except rotation, to their original factory values.

Exit

Closes the Advanced Geometry

EXIT

window, saves any changes you have made, and opens the previous window.

Using the OSD Advanced Menu Window

The OSD Advanced Menu window allows you to make changes to a variety of advanced display settings. Except in special circumstances, you will not need to adjust these settings, but they are available to you as added options.

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 17 of 40 Printed: 12/15/00 02:51 PM

To open the Advanced Menu window, select the

Advanced Menu

icon in

the OSD Main window.

ADVANCED MENU

COLOR

LANGUAGE

OSD POSITION

MOIRE

STATUS

OSD

In the OSD Advanced Menu window, the following functions are available:

Color Adjusts the color temperature of the image.

Language Sets the language of the OSD window.

OSD

OSD Position Adjusts the position of the OSD window.

Moiré Control Reduces wavy colored lines or patterns in the background of your image. Horizontal and vertical controls are available.

Status Provides information about the horizontal and vertical scan frequencies, the resolution (for pre-set modes only), and the serial number of the monitor.

EXIT

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 18 of 40 Printed: 12/15/00 02:51 PM

EXIT

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

EXIT

Exit Closes the OSD Advanced Menu window.

Choosing the Color Temperature

The default color settings in the Text and Video/Games modes are optimized for best results in those environments, but you can change the color temperature temporarily when necessary. (If you need to save color settings for a particular application, use the USER COLOR setting.)

You can choose between two settings: 9300K and 6500K.

The 9300K setting is often used for office environments or fluorescent lighting. The 6500K setting is often used in environments with incandescent lighting.

In the OSD Advanced window, press the Plus (+) or Minus (–) button to move to the Color icon.

Press the Select button to open the Color Adjustment window.

COLOR

9300K

✓

6500K USER color

EXIT

English

You can also choose to individually adjust the red, green, and blue (RGB) values that make up the screen image. See the section, “Setting Red,

Press the Plus (+) or Minus (–) button to move to the color temperature option you want.

Green, and Blue Values” on page 20 for instructions. To choose the color temperature:

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 19 of 40 Printed: 12/15/00 02:51 PM

Press the Select button to select the color temperature.

Select the

Exit

icon to close the Color window.

Setting Red, Green, and Blue Val ues

You may want to make very precise adjustments to the screen color. For example, under unique ambient lighting conditions, you may need to adjust the screen color so that it more closely matches the ambient lighting conditions. You can make these adjustments by individually setting red, green, and blue (RGB) values.

Make sure to let the monitor warm up fully before trying to match colors precisely. It takes the monitor up to 30 minutes to warm up completely after being turned on or recovering from a power-saving state.

To se t RG B val ues :

In the OSD Advanced Menu window, press the Plus (+) or Minus (–) button to move to the Color icon.

Press the Select button to open the Color Adjustment window.

In the Color Adjustment window, press the Plus (+) or Minus (–) button to move to the USER COLOR setting.

Press the Select button to open the RGB Adjustment window.

Press the Plus (+) or Minus (–) button to move among the options, and then press Select to choose an option.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 20 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

USER COLOR

Choosing a Language

RESET

EXIT

When a color is selected, press the Plus (+) or

RESET

EXIT

Minus (–) button to increase or decrease the video gain for that color, and then press Select.

Press Exit to close the USER COLOR window.

Note:

If you select the Reset icon, you reset the value of the color to the previously set user value.

To choose a language for the text in the OSD window:

In the OSD Advanced Menu window,

press the Plus (+) or Minus (–) button to move to the Language icon.

Press the Select button to open the Language

Selection window.

LANGUAGE

✓

ENGLISH ESPAÑOL FRANÇAIS DEUTSCH ITALIANO

EXIT

English

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 21 of 40 Printed: 12/15/00 02:51 PM

Press the Plus (+) or Minus (–) button to move to the language you want.

Press the Select button to select the language.

Press Exit to close the Language window.

Choosing the OSD Position

The default OSD window position for the windows is the center of the screen, but you can change the window position.

EXIT

OSD POSITION

EXIT

To adjust the OSD window position:

In the OSD Advanced Menu window, press the Plus (+) or Minus (–) button to move to the OSD Position icon.

Press the Select button to open the OSD Position window.

OSD

Press the Plus (+) or Minus (–) button to move between options.

Press Select to choose a function. The pointers change to arrows for the selected function.

With the vertical pointers selected, press the Plus (+) or Minus (–) button to move the OSD window up or down.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 22 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

+ 50

With the horizontal pointers selected, press the Plus (+) or Minus (–) button to move the OSD window right or left.

When you complete the adjustment, press Select.

Press Exit to close the OSD Position window.

Adjusting the Moiré Filters

Select the Moiré Control icon to reduce wavy colored lines or patterns in the background of your image. Separate adjustment of horizontal and vertical moiré is available.

To adjust the moiré filter:

In the OSD Advanced Menu window, press the Plus (+) or Minus (–) button to move to the Moiré icon.

Press the Select button to open the Moiré window.

Press the Plus (+) or Minus (–) button to move among the options.

MOIRÉ

H-MOIRÉ: ON

✓

H-MOIRÉ: OFF V-MOIRÉ: ON

✓

V-MOIRÉ: OFF

EXIT

Press the Select button to select an option. An

EXIT

adjustment bar will appear underneath the Moiré window if you select

V-Moiré : On

H-Moiré : On

English

Note:

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 23 of 40 Printed: 12/15/00 02:51 PM

The “H” in H-Moiré means horizontal; the “V” in V-Moiré means vertical.

Press the Select button to save your changes and close the adjustment bar.

Press Exit to close the Moiré window.

STATUS

SERIAL NUMBER AASDD12345

Using the Status Window

The Status window is an information window that displays the horizontal and vertical scan frequencies, the resolution (for pre-set modes only), and the serial number of the monitor.

To display the Status window:

In the OSD Advanced Menu window, press the Plus (+) or Minus (–) button to move to the Status icon.

Press the Select button to open the Status window.

Press Select to close the Status window.

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

FV :70Hz FH :31KHz

RESOLUTION: 640 X 480

EXIT

Restoring Factory Adjustments

To restore all parameters to the original factory values:

Turn the power off.

While pressing the Plus (+) button, turn the power back on.

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 24 of 40 Printed: 12/15/00 02:51 PM

Technical Information

This chapter contains technical information about the HP Pavilion MX50, MX70, and MX90 Multimedia Monitors.

These monitors are compatible with IBM PC, PC-compatible, and PS/2 PCs. They are also compatible with VESA power management standards. (See “DPMS Power Management Features” on page 29.)

Monitor Information

MX50 MX70 MX90

English

Picture tube

Maximum viewable area

Line (horizontal) frequency

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 25 of 40 Printed: 12/15/00 02:51 PM

15 in (38.1 cm), 90° deflection, black matrix, phosphor P22 medium short,

0.28 mm dot pitch

280 mm (H) x 210 mm (V) 11 in (H) x 8.25 in (V)

13.8 in (350 mm) diagonal

30–54 kHz 30–70 kHz 30–95 kHz

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

17 in (43.1 cm), 90° deflection, black matrix, phosphor P22 medium short,

0.27 mm dot pitch

320 mm (H) x 240 mm (V)

12.6 in (H) x 9.5 in (V)

15.8 in (400 mm) diagonal

19 in (48.2 cm), 100° deflection, 44% light transmission,

0.26mm dot pitch, semi-tint, anti-reflective/ anti-static coating (Arasc)

365 mm (H) x 274 mm (V

14.4 in (H) x 10.8 in (V) 18 in (457 mm) diagonal

MX50 MX70 MX90

(

)

(

)

(

)

Raster (vertical) frequency

Power source

Power consumption

Dot rate

Pedestal

Dimensions (W x H x D)

Net weight

Operating Conditions Temperature Humidity Altitude

Storage Conditions Temperature Humidity

47–100 Hz 50–120 Hz 50–150 Hz

100–240 VAC, 50–60 Hz (auto switching)

70 W maximum 90 W maximum 130 W maximum

65 MHz 110 MHz 160 MHz

Tilt: 5° forward, 15° backward Swivel: –45° left or right

366 x 396 x 412 mm

14.4 x 15.6 x 16.2 in

Tilt: 5° forward, 15° backward Swivel: –60° left or right

414 x 440 x 442 mm

16.3 x 17.3 x 17.4 in

Tilt: 5° forward, 15° backward Swivel: –60° left or right

465 x 487 x 422 mm

18.3 x 19.2 x 16.1 in

12.0 kg (26.4 lb.) 19.0 kg (41.9 lb.) 25.0 kg (55.0 lb.)

5° to 35°C (41° to 95°F) 15% to 80%, non-condensing

5° to 35°C (41° to 95°F) 15% to 80%, non-condensin 0 to 10,000 feet

–25° to 60°C

–13° to 140°F

20% to 80%, non-condensing

–25° to 60°C

–13° to 140°F

20% to 80%, non-condensing

–25° to 60°C

–13° to 140°F

20% to 80%, non-condensing

Filename: S01MXCUS.doc Title: HP-Print2k.dot Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc. Revision #: 6 Page: 26 of 40 Printed: 12/15/00 02:51 PM

HP Pavilion MX50, MX70, and MX90 Multimedia Monitors

+ 98 hidden pages