HP J7Y65AA User manual
IPS LED Backlit Monitors
User Guide
© 2014, Hewlett-Packard Development
Company, L.P.
Windows is either a trademark or registered
trademark of Microsoft Corporation in the
United States and/or other countries.
The only warranties for HP products and
services are set forth in the express
warranty statements accompanying such
products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable
for technical or editorial errors or omissions
contained herein.
This document contains proprietary
information that is protected by copyright.
No part of this document may be
photocopied, reproduced, or translated to
another language without the prior written
consent of Hewlett-Packard Company.
First Edition: September 2014
Document Part Number: 786794-001
About This Guide
This guide provides information on monitor features, setting up the monitor, using the software and
technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
TIP: Text set off in this manner provides helpful hints.
This product incorporates HDMI technology.
iii
iv About This Guide
Table of contents
1 Product Features .............................................................................................................................................. 1
HP IPS LCD Backlit Monitors ............................................................................................................... 1
2 Safety and maintenance guidelines .................................................................................................................. 3
Important safety information ................................................................................................................. 3
Maintenance guidelines ........................................................................................................................ 4
Cleaning the monitor ............................................................................................................ 4
Shipping the monitor ............................................................................................................ 4
3 Setting Up the Monitor ...................................................................................................................................... 5
Attaching the Monitor Stand ................................................................................................................. 5
Identifying Rear Components ............................................................................................................... 6
Connecting the Cables ......................................................................................................................... 7
Identifying Front Panel Controls ........................................................................................................... 9
Menu button functions ....................................................................................................... 10
Adjusting the Monitor .......................................................................................................................... 11
Turning on the Monitor ....................................................................................................................... 12
HP Watermark and Image Retention Policy ....................................................................................... 12
Mounting the Monitor (Optional) ......................................................................................................... 13
Removing the Monitor Stand ............................................................................................. 13
Attaching the VESA Mount Kit (Available with Select Models) .......................................... 14
Locating the Rating Label ................................................................................................................... 15
Installing a Cable Lock ....................................................................................................................... 15
4 Operating the monitor ..................................................................................................................................... 16
Software and utilities .......................................................................................................................... 16
The Information file ............................................................................................................ 16
The Image Color Matching file ........................................................................................... 16
Installing the .INF and .ICM files ........................................................................................................ 16
Installing from the disc ....................................................................................................... 16
Downloading from the Web ............................................................................................... 17
v
Using My Display software ................................................................................................................. 18
Installing the software ........................................................................................................ 18
Using the software ............................................................................................................. 18
Downloading the software ................................................................................................. 18
Using Auto-Sleep Mode ..................................................................................................................... 19
Using the On-Screen Display (OSD) menu ........................................................................................ 20
Appendix A Technical Specifications ................................................................................................................. 21
22cw/22xw Models ............................................................................................................................. 21
23cw/23xw Models ............................................................................................................................. 22
25cw/25xw Models ............................................................................................................................. 23
27cw/27xw Models ............................................................................................................................. 24
Recognizing Preset Display Resolutions ............................................................................................ 26
Factory Preset Modes ........................................................................................................ 26
High-definition Video Formats ........................................................................................... 26
Power Adapters ................................................................................................................. 26
Entering User Modes .......................................................................................................................... 27
Appendix B Support and troubleshooting .......................................................................................................... 28
Solving common problems ................................................................................................................. 28
Using the Auto-Adjustment Function (Analog Input) .......................................................................... 29
Optimizing Image Performance (Analog Input) .................................................................................. 30
Button lockouts ................................................................................................................................... 31
Product support .................................................................................................................................. 31
Preparing to call technical support ..................................................................................................... 31
vi
1 Product Features
HP IPS LCD Backlit Monitors
NOTE: Some models described in this guide may not be available in your country or region.
The LCD (liquid crystal display) monitors have an active matrix, In-Plane Switching (IPS) panel. The
monitor models and features include:
22cw/22xw models, 54.6 cm (21.5-in) diagonal viewable area display with 1920 x 1080
●
resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum
image size while preserving original aspect ratio
23cw/23xw models, 58.4 cm (23-in) diagonal viewable area display with 1920 x 1080 resolution,
●
plus full-screen support for lower resolutions; includes custom scaling for maximum image size
while preserving original aspect ratio
25cw/25xw models, 63.3 cm (25-in) diagonal viewable area display with 1920 x 1080 resolution,
●
plus full-screen support for lower resolutions; includes custom scaling for maximum image size
while preserving original aspect ratio
27cw/27xw models, 68.6cm (27-in) diagonal viewable area display with 1920 x 1080 resolution,
●
plus full-screen support for lower resolutions; includes custom scaling for maximum image size
while preserving original aspect ratio
LED backlight that consumes less energy
●
Tilt capability and wide viewing angle to allow viewing from a sitting or standing position, or
●
moving from side to side
Video signal input to support VGA analog
●
Video signal input to support high-definition multimedia interface (HDMI)
●
Plug and play capability if supported by your operating system
●
Security slot provision on rear of monitor for optional cable lock
●
On-Screen Display (OSD) adjustments in several languages for easy setup and screen
●
optimization
My Display
●
HDCP (High-bandwidth Digital Content Protection) copy protection on HDMI inputs
●
software for adjusting monitor settings
Software and documentation disc that includes monitor drivers and product documentation
●
Energy saver feature to meet requirements for reduced power consumption
●
HP IPS LCD Backlit Monitors 1
NOTE: For safety and regulatory information, refer to the
disc, if one is included, or in your documentation kit. To locate updates to the user guide for your
product, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and
then follow the on-screen instructions.
Product Notices
provided on your media
2 Chapter 1 Product Features
2 Safety and maintenance guidelines
Important safety information
A power cord is included with the monitor. If another cord is used, use only a power source and
connection appropriate for this monitor. For information on the correct power cord set to use with the
monitor, refer to the
documentation kit.
WARNING! To reduce the risk of electric shock or damage to the equipment:
• Plug the power cord into an AC outlet that is easily accessible at all times.
• Disconnect power from the computer by unplugging the power cord from the AC outlet.
• If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed)
3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter.
The grounding pin is an important safety feature.
Product Notices
provided on your media disc, if one is included, or in your
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the
workstation, setup, posture, and health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/
ergo.
CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for
the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge
protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips
provide surge protection; the power strips must be specifically labeled as having this ability. Use a
power strip whose manufacturer offers a Damage Replacement Policy so you can replace the
equipment, if surge protection fails.
Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.
WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks,
speakers, chests, or carts may fall over and cause personal injury.
Care should be taken to route all cords and cables connected to the LCD monitor so that they cannot
be pulled, grabbed, or tripped over.
NOTE: This product is suitable for entertainment purposes. Consider placing the display in a
controlled luminous environment to avoid interference from surrounding light and bright surfaces that
may cause disturbing reflections from the screen.
Safety and Comfort Guide
. It describes proper
Important safety information 3
Maintenance guidelines
To enhance the performance and extend the life of the monitor:
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those
●
controls that are covered in the operating instructions. If the monitor is not operating properly or
has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.
Use only a power source and connection appropriate for this monitor, as indicated on the label/
●
back plate of the monitor.
Be sure the total ampere rating of the products connected to the outlet does not exceed the
●
current rating of the electrical outlet, and the total ampere rating of the products connected to the
cord does not exceed the rating of the cord. Look on the power label to determine the ampere
rating (AMPS or A) for each device.
Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping
●
the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
Turn the monitor off when not in use. You can substantially increase the life expectancy of the
●
monitor by using a screen saver program and turning off the monitor when not in use.
NOTE: Monitors with a “burned-in image” are not covered under the HP warranty.
Slots and openings in the cabinet are provided for ventilation. These openings must not be
●
blocked or covered. Never push objects of any kind into cabinet slots or other openings.
Do not drop the monitor or place it on an unstable surface.
●
Do not allow anything to rest on the power cord. Do not walk on the cord.
●
Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.
●
When removing the monitor stand, you must lay the monitor face down on a soft area to prevent
●
it from getting scratched, defaced, or broken.
Cleaning the monitor
1. Turn off the monitor and unplug the power cord from the back of the unit.
2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.
3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.
CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.
Never spray the cleaner directly on the screen surface. It may run behind the bezel and damage the
electronics.
CAUTION: Do not use cleaners that contain any petroleum based materials such as benzene,
thinner, or any volatile substance to clean the monitor screen or cabinet. These chemicals may
damage the monitor.
Shipping the monitor
Keep the original packing box in a storage area. You may need it later if you move or ship the
monitor.
4 Chapter 2 Safety and maintenance guidelines
3 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
Attaching the Monitor Stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can
cause damage.
TIP: Consider the placement of the display, because the bezel might cause interfering reflections
from surrounding light and bright surfaces.
1. Remove the stand/base assembly, and then lift the monitor from the box and place it face down
on a flat surface.
2. Slide the stand into the base until the stand is locked in place.
Attaching the Monitor Stand 5
3. Insert the two tabs on the stand into the slot on the back of the display head until they click into
place.
Identifying Rear Components
Component Function
1 VGA Connects the VGA cable from the computer to the monitor
2 HDMI Connects the HDMI cable from the computer to the monitor
3 HDMI* Connects the HDMI cable from the computer to the monitor
4 DC Power LED Illuminates when power adapter is connected to the
5 DC Power Connector Connects the DC power adapter to the monitor
6 Cable Lock Slot Connects the optional cable lock to the monitor
* Select models only
6 Chapter 3 Setting Up the Monitor
monitor
Loading...