HP HFBR-2416T, HFBR-2416M, HFBR-2416K, HFBR-2416HB, HFBR-2416HA Datasheet

...

Transmitters and receivers are directly compatible with popular “industry-standard” connectors: ST, SMA, SC and FC. They are completely specified with multiple fiber sizes; including 50/125 µm, 62.5/125 µm, 100/ 140 µm, and 200 µm.

Complete evaluation kits are available for ST and SMA product offerings; including transmitter, receiver, connectored cable, and technical literature. In addition, ST and SMA connectored cables are available for evaluation.

Low Cost, Miniature Fiber Optic Components with ST®, SMA, SC and FC Ports

Technical Data

HFBR-0400 Series

Features

• Meets IEEE 802.3 Ethernet and 802.5 Token Ring Standards

• Low Cost Transmitters and Receivers

• Choice of ST®, SMA, SC or FC Ports

• 820 nm Wavelength Technology

• Signal Rates up to 175 Megabaud

• Link Distances up to 4 km

• Specified with 50/125 µm,

62.5/125 µm, 100/140 µm, and 200 µm HCS

Fiber

• Repeatable ST Connections within 0.2 dB Typical

• Unique Optical Port Design for Efficient Coupling

• Auto-Insertable and Wave Solderable

• No Board Mounting Hardware Required

• Wide Operating Temperature Range

-40°C to 85°C

• AlGaAs Emitters 100% Burn-In Ensures High Reliability

• Conductive Port Option with the SMA and ST Threaded Port Styles

Applications

• Local Area Networks

• Computer to Peripheral Links

• Computer Monitor Links

• Digital Cross Connect Links

• Central Office Switch/PBX Links

• Video Links

• Modems and Multiplexers

• Suitable for Tempest Systems

• Industrial Control Links

Description

The HFBR-0400 Series of components is designed to provide cost effective, high performance fiber optic communication links for information systems and industrial applications with link distances of up to 4 kilometers. With the HFBR-24X6, the 125 MHz analog receiver, data rates of up to 175 megabaud are attainable.

ST® is a registered trademark of AT&T. HCS® is a registered trademark of the SpecTran Corporation.

5965-1655E (1/97)

HFBR-0400 Series Part Number Guide

HFBR X4XXaa

1 = Transmitter Option T (Threaded Port Option) 2 = Receiver Option C (Conductive Port Receiver Option)

Option M (Metal Port Option)

4 = 820 nm Transmitter and Option K (Kinked Lead Option)

Receiver Products TA = Square pinout/straight lead

TB = Square pinout/bent leads 0 = SMA, Housed HA = Diamond pinout/straight leads 1 = ST, Housed HB = Diamond pinout/bent leads 2 = FC, Housed E = SC, Housed 2 = Tx, Standard Power 3 = SMA Port, 90 deg. Bent Leads 4 = Tx, High Power 4 = ST Port, 90 deg. Bent Leads 2 = Rx, 5 MBd, TTL Output 5 = SMA Port, Straight Leads 6 = Rx, 125 MHz, Analog Output 6 = ST Port, Straight Leads

LINK SELECTION GUIDE

Data Rate (MBd) Distance (m) Transmitter Receiver Fiber Size (µm) Evaluation Kit

5 1500 HFBR-14X2 HFBR-24X2 200 HCS N/A 5 2000 HFBR-14X4 HFBR-24X2 62.5/125 HFBR-04X0

20 2700 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414,

HFBR-0463 32 2200 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414 55 1400 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0414

125 700 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416 155 600 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416 175 500 HFBR-14X4 HFBR-24X6 62.5/125 HFBR-0416

For additional information on specific links see the following individual link descriptions. Distances measured over temperature range from 0 to 70°C.

Applications Support Guide

This section gives the designer information necessary to use the HFBR-0400 series components to

make a functional fiber-optic transceiver. HP offers a wide selection of evaluation kits for hands-on experience with fiberoptic products as well as a wide

Application Literature

Title Description

HFBR-0400 Series Transmitter & Receiver Reliability Data Reliability Data

Application Bulletin 73 Low Cost Fiber Optic Transmitter & Receiver Interface Circuits Application Bulletin 78 Low Cost Fiber Optic Links for Digital Applications up to 155 MBd Application Note 1038 Complete Fiber Solutions for IEEE 802.3 FOIRL, 10Base-FB and 10 Base-FL Application Note 1065 Complete Solutions for IEEE 802.5J Fiber-Optic Token Ring Application Note 1073 HFBR-0319 Test Fixture for 1X9 Fiber Optic Transceivers Application Note 1086 Optical Fiber Interconnections in Telecommunication Products

range of application notes complete with circuit diagrams and board layouts. Furthermore, HP’s application support group is always ready to assist with any design consideration.

HFBR-0400 Series Evaluation Kits

HFBR-0410 ST Evaluation Kit

Contains the following :

• One HFBR-1412 transmitter

• One HFBR-2412 five megabaud TTL receiver

• Three meters of ST connectored 62.5/125 (µm fiber optic cable with low cost plastic ferrules.

• Related literature

HFBR-0414 ST Evaluation Kit

Includes additional components to interface to the transmitter and receiver as well as the PCB to reduce design time.

Contains the following:

• One HFBR-1414T transmitter

• One HFBR-2416T receiver

• Three meters of ST connectored 62.5/125 µm fiber optic cable

• Printed circuit board

• ML-4622 CP Data Quantizer

• 74ACTllOOON LED Driver

• LT1016CN8 Comparator

• 4.7 µH Inductor

• Related literature

HFBR-0400 SMA Evaluation Kit

Contains the following :

• One HFBR-1402 transmitter

• One HFBR-2402 five megabaud TTL receiver

• Two meters of SMA connectored 1000 µm plastic optical fiber

• Related literature

HFBR-0416 Evaluation Kit

Contains the following:

• One fully assembled 1x9 transceiver board for 155 MBd evaluation including:

-HFBR-1414 transmitter

-HFBR-2416 receiver

-circuitry

• Related literature

HFBR-0463 Ethernet MAU Evaluation Kit

Contains the following:

• One fully assembled Media Attachment Unit (MAU) board which includes:

-HFBR-1414 transmitter

-HFBR-2416 receiver

-HFBR-4663 IC

• Related literature

Note: Cable not included. Order HFBR-BXS010 seperately (2 pieces)

Package and Handling Information

Package Information

All HFBR-0400 Series transmitters and receivers are housed in a low-cost, dual-inline package that is made of high strength, heat resistant, chemically resistant, and UL 94V-O flame retardant ULTEM® (plastic (UL File #E121562). The transmitters are easily identified by the light grey color connector port. The receivers are easily identified by the dark grey color connector port. (Black color for conductive port.) The package is designed for auto-insertion and wave soldering so it is ideal for

high volume production applications.

Handling and Design Information

Each part comes with a protective port cap or plug covering the optics. These caps/plugs will vary by port style. When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air often is sufficient to remove particles of dirt; methanol on a cotton swab also works well.

Recommended Chemicals for Cleaning/Degreasing HFBR-0400 Products

Alcohols: methyl, isopropyl, isobutyl. Aliphatics: hexane, heptane, Other: soap solution, naphtha.

Do not use partially halogenated hydrocarbons such as 1,1.1 trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride, or N-methylpyrolldone. Also, HP does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm.

Ultem® is a registered Trademark of the GE corporation.

Mechanical Dimensions HFBR-0400 SMA Series

HFBR-X43X

HFBR-X45X

HFBR-X40X

13.2

(052)

2.5

(0.10)

DIA

NOTE 2

NOTE: ALL DIMENSIONS IN MILLIMETRES AND (INCHES).

13.0

(0.51)

2.0

(0.08)

9.1

(0.36)

7.1

(0.28)

PART MARKING

.46

(0.018)

YY WW

4.1

(0.16)

1/4 - 36 UNS 2A THREAD8.6

(0.34)

DIA

DIA PIN CIRCLE

7.1

(0.28)

DIA

YY WW

2.5

(0.10)

7.1

(0.28)

TYP

NOTE 2

8.6

(0.34)

DIA

2.5

(0.10)

DIA PIN CIRCLE

0.46

(0.018)

DIA TYP

4.8

(0.19)

2.3

(0.09)

2.0

(0.08)

4.1

(0.16)

2.5

(0.10)

3.0

(0.12)

TYP

7.1

(0.28)

DIA

13.0

(0.51)

PART MARKING

1/4 - 36 UNS 2A THREAD

3.6

(0.14)

MIN

6.35

(0.25)

2.54

(0.10)

3.81

(0.15)

6.4

(0.25)

DIA

12.7

(0.50)

12.7

(0.50)

22.2

(0.87)

5.1

(0.20)

10.2

(0.40)

3.6

(0.14)

1.27

(0.05)

2.54

(0.10)

PINS 1,4,5,8

0.51 X 0.38

(0.020 X 0.015)

PINS 2,3,6,7

0.46

(0.018)

DIA.

524 6

PIN NO. 1 INDICATOR

1/4 - 36 UNS 2A THREAD

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X40X

Mechanical Dimensions HFBR-0400 ST Series

HFBR-X44X

HFBR-X46X

HFBR-X41X

13.2

(0.52)

2.5 (0.10) DIA PIN CIRCLE

8.6

(0.34)

PIN DIA

NOTE 2

DIA

NOTE: ALL DIMENSIONS IN MILLIMETRES AND (INCHES).

18.6

(0.73)

7.0

(0.28)

7.1

(0.28)

7.1

(0.28)

2.O

(0.08)

0.46

(0.018)

21 34

8.2

(0.32)

9.1

(0.36)

DIA

X-YWW

PART MARKING

2.5

(0.10)

7.1

(0.28)

3.6

(0.14)

TYP

NOTE 2

DIA

2.5

(0.10)

DIA PIN CIRCLE

0.46 (0.018) PIN DIA

4.9

(0.19)

2.4

(0.09)

2.0

(0.08)

7.0

(0.28)

3.0

(0.12)

2.5

(0.10)

TYP

7.1

(0.28)

DIA

18.6

(0.73)

8.6

(0.34)

MIN

8.2

(0.32)

DIA

X-YWW

PART MARKING

6.35

(0.25)

2.54

(0.10)

3.81

(0.15)

7.0

(0.28)

DIA

12.7

(0.50)

12.7

(0.50)

27.2

(1.07)

5.1

(0.20)

10.2

(0.40)

3.6

(0.14)

8.2

(0.32)

1.27

(0.05)

2.54

(0.10)

PINS 1,4,5,8

0.51 X 0.38

(0.020 X 0.015)

PINS 2,3,6,7

0.46

(0.018)

DIA

6 7

PIN NO. 1 INDICATOR

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X41X

Mechanical Dimensions HFBR-0400T Threaded ST Series

HFBR-X44XT

HFBR-X46XT

HFBR-X41XT

DIA.

2.54

(0.10)

3.81

(0.15)

7.1

(0.28)

DIA

12.7

(0.50)

12.7

(0.50)

27.2

(1.07)

PIN NO. 1 INDICATOR

6.35

(0.25)

5.1

(0.20)

10.2

(0.40)

3.6

(0.14)

8.4

(0.33)

1.27

(0.05)

2.54

(0.10)

7.6

(0.30)

5.1

(0.20)

PINS 1,4,5,8

0.51 X 0.38

(0.020 X 0.015)

PINS 2,3,6,7

0.46

(0.018)

DIA

3/8 - 32 UNEF - 2A

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X41XT

7.6

(0.30)

ACROSS THREAD

FLATS

8.4

(0.33)

4.9

(0.19)

2.4

(0.09)

2.0

(0.08)

4.1

(0.16)

3.0

(0.12)

2.5

(0.10)

2.5

(0.10)

7.1

(0.28)

3.6

(0.14)

TYP

MIN

TYP

7.1

(0.28)

DIA

5.1

(0.20)

18.5

(0.73)

YY WW

3/8 - 32 UNEF - 2A THREAD

0.46 (0.018) PIN DIA

NOTE 2

8.6

(0.34)

DIA

2.5

(0.10)

DIA PIN CIRCLE

PART MARKING

0.46

(0.018)

7.1

(0.28)

PIN DIA

NOTE 2

2.5

(0.10)

DIA PIN CIRCLE

8.4

(0.33)

7.6

(0.30)

ACROSS THREAD

FLATS

5.1

(0.20)

18.5

(0.73)

YY WW

3/8 - 32 UNEF - 2A THREAD

13.2

(0.52)

2.0

(0.08)

9.1

(0.36)

4.1

(0.16)

8.6

(0.34)

DIA

PART MARKING

Mechanical Dimensions HFBR-0400 FC Series

Mechanical Dimensions HFBR-0400 SC Series

3.81

(0.15)

12.7

(0.50)

12.7

(0.50)

5.1

(0.20)

PIN NO. 1 INDICATOR

7.9

(0.31)

2.5

(0.10)

M8 x 0.75 6G THREAD (METRIC)

2.5

(0.10)

3.6

(0.14)

19.6

(0.77)

10.2

(0.40)

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X42X

HFBR-X4EX

28.65

(1.128)

15.95

(0.628)

10.0

(0.394)

12.7

(0.500)

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X4EX

Figure 1. HFBR-0400 ST Series Cross-Sectional View.

Panel Mount Hardware

Port Cap Hardware

HFBR-4402: 500 SMA Port Caps HFBR-4120: 500 ST Port Plugs (120 psi) HFBR-4412: 500 FC Port Caps HFBR-4417: 500 SC Port Plugs

HOUSING

CONNECTOR PORT

HEADER

EPOXY BACKFILL

PORT GROUNDING PATH INSERT

LED OR DETECTOR IC

LENS–SPHERE (ON TRANSMITTERS ONLY)

LENS–WINDOW

7.87

(0.310)

TYP DIA

0.14

(0.005)

1.65

(0.065)

1/4 – 36 UNEF – 2B THREAD

HEX-NUT

DIA

6.61

(0.260)

WASHER

7,87

(0.310)

14.27 (0.563)

TYP DIA

10.41

(0.410)

MAX DIA

0.46

(0.018)

1.65

(0.065)

3/8 – 32 UNEF2B THREAD

HEX-NUT

DIA

12.70 (0.50)

WASHER

HFBR-4401: for SMA Ports HFBR-4411: for ST Ports

(Each HFBR-4401 and HFBR-4411 kit consists of 100 nuts and 100 washers.)

3/8 - 32 UNEF - 2A THREADING

0.2 IN.

WALL

WASHER

NUT

1 THREAD AVAILABLE

Rx/Tx

COUNTRY OF

ORIGIN

hp YYWW

HFBR-X40X

DATE CODE

PART NUMBER

Options

In addition to the various port styles available for the HFBR0400 series products, there are also several extra options that can be ordered. To order an option, simply place the corresponding option number at the end of the part number. For instance, a metal-port option SMA receiver would be HFBR-2406M. You can add any number of options in series at the end of a part number. Please contact your local sales office for further information or browse HP’s fiber optics home page at http:// www.hp.com/go/fiber

Option T (Threaded Port Option)

• Allows ST style port components to be panel mounted.

• Compatible with all current makes of ST multimode connectors

• Mechanical dimensions are compliant with MIL-STD83522/13

• Maximum wall thickness when using nuts and washers from the HFBR-4411 hardware kit is

2.8 mm (0.11 inch)

• Available on all ST ports

Option C (Conductive Port Receiver Option)

• Designed to withstand electrostatic discharge (ESD) of 25kV to the port

• Significantly reduces effect of electromagnetic interference (EMI) on receiver sensitivity

• Allows designer to separate the signal and conductive port grounds

• Recommended for use in noisy environments

• Available on SMA and threaded ST port style receivers only

Option M (Metal Port Option)

• Nickel plated aluminum connector receptacle

• Designed to withstand electrostatic discharge (ESD) of 15kV to the port

• Significantly reduces effect of electromagnetic interference (EMI) on receiver sensitivity

• Allows designer to separate the signal and metal port grounds

• Recommended for use in very noisy environments

• Available on SMA, FC, ST, and threaded ST ports

Option K (Kinked Lead Option)

• Grounded outside 4 leads are “kinked”

• Allows components to stay anchored in the PCB during wave solder and aqueous wash processes

Options TA, TB, HA, HB (Active Device Mount Options)

(These options are unrelated to the threaded port option T.)

• All metal, panel mountable package with a 3 or 4 pin receptacle end

• Available for HFBR-14X4, 24X2 and 24X6 components

• Choose from diamond or square pinout, straight or bent leads ADM Picture

• TA = Square pinout/straight

leads TB = Square pinout/bent leads HA = Diamond pinout/straight

leads

HB = Diamond pinout/bent

leads

Duplex Option

In addition to the standard options, some HFBR-0400 series products come in a duplex configuration with the transmitter on the left and the receiver on the right. This option was designed for ergonomic and efficient manufacturing. The following part numbers are available in the duplex option: HFBR-5414 (Duplex ST) HFBR-5414T (Duplex Threaded

ST)

HFBR-54E4 (Duplex SC)

Typical Link Data

HFBR-0400 Series

Description

The following technical data is taken from 4 popular links using the HFBR-0400 series: the 5 MBd link, Ethernet 20 MBd link, Token Ring 32 MBd link, and the 155 MBd link. The data given

corresponds to transceiver solutions combining the HFBR-0400 series components and various recommended transceiver design circuits using off-the-shelf electrical components. This data is meant to be regarded as an

example of typical link performance for a given design and does not call out any link limitations. Please refer to the appropriate application note given for each link to obtain more information.

5 MBd Link (HFBR-14XX/24X2)

Link Performance -40°C to +85°C unless otherwise specified

Parameter Symbol Min. Typ. Max. Units Conditions Reference

Optical Power Budget OPB

4.2 9.6 dB HFBR-14X4/24X2 Note 1

with 50/125 µm fiber NA = 0.2 Optical Power Budget OPB

62.5

8.0 15 dB HFBR-14X4/24X2 Note 1

with 62.5/125 µm fiber NA = 0.27 Optical Power Budget OPB

100

8.0 15 dB HFBR-14X2/24X2 Note 1

with 100/140 µm fiber NA = 0.30 Optical Power Budget OPB

200

12 20 dB HFBR-14X2/24X2 Note 1

with 200 µm fiber NA = 0.37 Date Rate Synchronous dc 5 MBd Note 2 Asynchronous dc 2.5 MBd Note 3,

Fig. 7

Propagation Delay t

PLH

72 ns TA = 25°C, Figs. 6, 7, 8

LOW to HIGH PR = -21 dBm Peak Propagation Delay t

PHL

46 ns

HIGH to LOW System Pulse Width t

PLH-tPHL

26 ns Fiber cable

Distortion length = 1 m Bit Error Rate BER 10

-9

Data Rate <5 Bd PR > -24 dBm Peak

Notes:

1. OPB at TA = -40 to 85°C, VCC = 5.0 V dc, I

F ON

= 60 mA. PR = -24 dBm peak.

2. Synchronous data rate limit is based on these assumptions: a) 50% duty factor modulation, e.g., Manchester I or BiPhase Manchester II; b) continuous data; c) PLL Phase Lock Loop demodulation; d) TTL threshold.

3. Asynchronous data rate limit is based on these assumptions: a) NRZ data; b) arbitrary timing-no duty factor restriction; c) TTL threshold.

+ 21 hidden pages