HP dx2700, dx2708 Illustrated Parts Map

System Unit

1 Front bezel (1 solid silver) with diskette drive bezel

and 2 - 5.25" bezel. (See Miscellaneous parts for kit contents) for dx2700 MT model

435333-001

2 Front bezel (carbonite and silver) with diskette drive

bezel and 2- 5.25” bezel blanks for dx2708 MT models

435334-001

3 Power supply, 250W PFC 435332-001

* Power supply, 250W non-PFC 435303-001

* Power supply, 300W non-PFC 435330-001

4 Access panel used on all models 435331-001

5 Chassis not spared

* Not shown

Mass Storage Devices

1 Diskette drive, 3.5-inch 435420-001

40GB, SATA 1.5G 416737-001

80GB, SATA 3G 391945-001

160GB, SATA 3G 391741-001

250GB, SATA 3G 391937-001

* 52X CD-ROM drive 419619-001

* 16X DVD +/- RW drive (LS/DL/DF) 419498-001

* 16X/48X DVD-ROM drive 419496-001

* 48X/32X Combo Drive 419497-001

* Not shown

Blanks Cables

Cable kit 435309-001

1 Diskette drive cable

2 Hard drive cable, primary SATA (1 device)

* Optical drive cable, secondary SATA (2 devices)

3 Audio cable for Linux 419207-001

* Not shown

Keyboards (not illustrated)

Keyboard, PS2 382925-xxx

International -B31

Peoples Republic of China -AA1

Taiwanese -AB1

Thai -281

KOR -AD1

Keyboard, USB 382926-xxx

International -B31

Peoples Republic of China -AA1

Taiwanese -AB1

Thai -281

KOR -AD1

* Not shown

Standard and Optional Boards

Memory modules

1 256MB, PC2-4200

393392-001

* 512MB, PC2-4200

393393-001

* 1GB, PC2-4200

393394-001

* 256MB, PC2-5300

396519-001

* 512MB, PC2-5300

396520-001

* 1GB, PC2-5300

398038-001

Intel Processors with alchohol pad and thermal grease

* Celeron 3.33GHz/512K/D-0, LGA775 processor

433508-001

* Celeron 3.46GHz/512K/D-0, LGA775 processor

434708-001

2 Celeron 3.2GHz LGA775 processor

382503-001

* Celeron 2.8GHz LGA775 processor

391941-001

* Celeron 3.06GHz LGA775 processor

405693-001

* Celeron 2.66GHz LGA775 processor

391940-001

* Celeron 2.53GHz LGA775 processor

407322-001

* Conroe, 1.86GHz/1066, 2M, B-2

418947-001

* Conroe, 2.13GHz/1066, 2M, B-2

418948-001

* Conroe, 2.4GHz/1066, 4M, B-2

418949-001

* Conroe, 2.66GHz/1066, 4M, B-2

418950-001

* Presler-915, Mnstm, 2.8GHz, 4M, C-1

433843-001

* Presler-945, Mnstm, 3.4GHz, 4M, C-1

433890-001

* Presler-925, Mnstm, 3.0GHz, 4M, C-1

433510-001

* Smthfld-820, Mnstm, 2.8G, 2M, B-0

432623-001

* Smthfld-805, Mnstm, 2.66G,2M, B-0

433912-001

* P4-541, Mstrm, 3.2G, 1M, G-1

433860-001

* P4-531, Mstrm, 3.0G, 1M, G-1

394642-001

* P4-524, Mstrm, 3.06G/533MHz

360734-413

3 Front I/O PCA with cable for MT

435304-001

System board with alcohol and thermal grease

* System board

435316-001

Other boards

* Intel Gb NIC PCIe, FH

430654-001

* Broadcom Gb NIC PCIe, FH

398754-001

* MDM, PCI modem, V92, FH

398661-001

* Not shown # Spared with alcohol wipe and thermal grease

Miscellaneous Parts

Miscellaneous hardware kit. Includes: 435308-001

1 5.25” drive bezel blank without metal shield (1 ea)

2 Diskette drive bezel without m etal shield, silver (1 ea)

6 3.5” diskette drive bezel without metal shield (carbonite) (1 ea)

5 Cover slot (2 ea)

4 Cover slot lock (1 ea)

3 Heatsink with alcohol pad and thermal grease 435313-001

* System Fan 435307-001

* USB scroll mouse carbonite 390939-001

* USB optical mouse carbonite 390938-001

* PS/2 scroll mouse 390937-001

* PS/2 optical Mouse 417966-001

* Sensor, intrusion 435312-001

* Internal speaker 435327-001

* Battery, real-time clock 153099-001

Miscellaneous screw kit, includes : 435305-001

* #6-32 x 0.25 lg pan head (11 ea, for power supply, cover slot lock

and motherboard.)

* #6-32 x 0.187 lg hi top (10 ea, 2 for I/O bracket, 4 for Hard Disk

Drive, 2 for Optical drive, 2 for Hard disk drive bracket)

* #6-32 x 0.312 lg hi top (1 ea, for Access panel)

* #6-32 flat screw (1 ea, for Power supply bracket)

* M3 x 0.5 screw for Diskette Drive (3 ea)

* Screw for system fan (4 ea)

Company, L.P.

HP and the HP logo are trademarks of Hewlett-Packard

Development Company, L.P.

Intel and Celeron are US registered trademarks of Intel Corporation. All other product names mentioned herein

may be trademarks of their respective companies.

HP shall not be liable for technical or editorial errors or

omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for

HP products are set forth in the express limited warranty

statements accompanying such products. Nothing herein

should be construed as constituting an additional

warranty.

September 2006

Document Part Number 431673-001

HP Compaq Business Desktop dx2700/dx2708 Microtower Models

Illustrated Parts Map Conroe, Pentium D (Presler/Smithfield), Pentium 4, and Celeron D Processors

Miscellaneous cable kit 435309-001

* 1. Hard Disk Drive cable - 280mm (SATA connector) x 1

* 2. Optical drive cable x 1, 380mm - SATA

* 3. Diskette drive cable x 1, 200mm

* RJ11 cable 198220-005

* Not shown

System Board Connectors and Jumpers (position of some untitled components may vary in location)

Label Component Label Component

XU1 Processor socket Clear_CMOS Clear CMOS header

CPU_FAN CPU fan J94 Front panel header

DIMM1 Memory socket 1 XBT1 Real-time-clock battery

DIMM2 Memory socket 2 Front_Audio Front audio header

DIMM3 Memory socket 3 CD_in CD in audio

DIMM4 Memory socket 4 PCI 1 PCI 1 connector

FLOPPY Diskette drive connector PCI 2 PCI 2 connect or

Power ATX main power PCI 3 PCI 3 connector

SATA1 SATA connector 1 PCIE X 1 PCI-E x1 connector

SATA2 SATA connector 2 SYS_FAN System fan

SATA3 SATA connector 3 P5 CPU 4 pin power connector

SATA4 SATA connector 4

#See table below AGP socket not shown in this drawing

Clear_CMOS CMOS

Clear CMOS 1-2

Normal (Default) 2-3

System Hardware Interrupts

IRQ

System Function IRQ System Function

Keyboard 10 VGA control ler

USB OHCI (DID:F02) 10 USB OHCI (DIA:F00)

Serial Port 10 USB OHCI (DID:F00)

FDC controller 10 Lan controller

Parallel Port (LPT 1) 11 SATA controller

USB OHCI (DIA:F01) 12 Mouse

USB OHCI (DID:F01)

Establishing a Password

1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the computer.

2. When the F10 Setup message appears in the lower-right corner of the screen, press the F10 key. Press Enter to bypass the title screen, if necessary. If you do not press F10 when prompted, a restart will be necessary.

3. Select supervisor password and press enter key, and follow the instructions on the screen. You may also want to establish the Password check at this time. This will allow you to specify when the password will be required.

4. Before exiting, click Save Settings and Exit.

Changing a Password

1. Turn on or restart the computer. If you are in Windows, click Start> Shut Down > Restart the Computer. To change the setup password, run Computer Setup.

2. When the key icon appears, type your current password, a slash (/) or alternate de-limiter character, your new password, another slash (/) or alternate delimiter character, and your new password again as shown:

current password/new password/new password.

NOTE: Type the new password carefully since the actual characters do not appear on the screen.

3. Press the enter key.

4. The new password will take effect the next time the computer is restarted.

SYS_FAN

PCIE X 1

PCI 1

PCI 2

PCI 3

FRONT AUDIO HEADER

CD_IN AUDIO

FRONT USB 1

FRONT USB 2

SATA 3

SATA 4

SATA 1

SATA 2

FRONT PANEL HEADER

CLEAR CMOS JUMPER

XBT1

FLOPPY

PWR P8

DIMM 4

DIMM 3

DIMM 1

DIMM 2

CPU_FAN

CPU XU1

Deleting a Password

1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart the Computer. To delete the setup password, run Computer Setup (F10).

2. When the key icon appears, type your current password followed by a slash (/) or alternate delimiter character as shown. Example: currentpassword/

3. Press the Enter key.

Clearing CMOS*

The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS memory using by performing the following procedure:

CAUTION: The power cord must be disconnected from the power source before changing the jumper setting. (NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board

1. Turn off the computer and any external devices, then disconnect the power cord from the power outlet.

2. Remove the access panel.

3. Clear CMOS with header J1.

4. Replace the access panel.

5. Connect the power cord to the power outlet.

6. Turn on the computer, allow it to start.

NOTE: Clearing CMOS clears all passwords.

Diagnostic LEDs

LED Color LED Activity State/Message

Power Green On (S0) Computer on

Power Green 1 blink every 2 seconds (S1) Normal Suspend Mode

Power Green 1 blink every 2 seconds (S3) Suspend to RAM

Power Clear Off (S4) Suspend to Disk (if applicable)

Power Clear Off (S5) Computer off

Power Green Green when flashing ROM Boot block recovery w/Embedded Video

Power Red Power LED turns into green and

start to blink two times every second, followed by two second pause.

CPU thermal shutdown (Weak CPU fan speed or not running)

Power Red Power LED flashes 5 seconds

every 1 second, followed by 2 seconds pause, and meanwhile, 5 beeps are heard.

No memory installed / Pre-Video memory error

Power Red Power LED flashes 6 seconds

every 1 second, followed by 2 seconds pause, and meanwhile, 6 beeps are heard.

Graphics card error (Pre-Video graphics error)

Power Red Power LED flashes 8 seconds

every 1 second, followed by 2 seconds pause, and meanwhile, 8 beeps are heard.

System board failure or invalid ROM basing on checksum.

Hard Drive Green Blinking Hard drive activity

Computer Setup (F10) Utility Features (not all features may be available)

System Information

System S/N Product Name OwnerShip TAG BIOS Version BIOS Release Date System Chipset Type Processor Type Processor Speed CPU ID Cache Size

Memory DIMM1 Memory DIMM2 Memory DIMM3 Memory DIMM4 DDR2 Memory Size UUID Chassis Serial Number Asset TAG Number Integrated MAC

Standard CMOS Features

System Date System Time Floppy Drive A SATA Port 0 SATA Port 1 SATA Port 2 SATA Port 3 SATA Port 0/1 Working Mode

Halt On

Advanced BIOS Features

Quick Power On Self Test POST Delay Time (seconds) Hard Disk Boot Priority First Boot Device Second Boot Device Third Boot Device Fourth Boot Device Boot Other Device

Load Boot Menu Selectable APIC Mode System Keyboard Boot Up NumLock Status Security Option

Advanced Chipset Features

PEG/Onchip VGA Control On-Chip Frame Buffer Size DVMT Mode DVMT/FIXED Memory Size Init Display First

Integrated Peripherals

USB Controller USB Legacy support HD Audio Onboard Lan Onboard Lan Boot ROM

Onboard FDC Controller

Serial Port Parallel Port Parallel Port Mode ECP Mode Use DMA

Power Management Setup

ACPI Function ACPI Suspend Type Restore On AC/Power Loss Resume On PME Resume On Ring Resume On Alarm Date(of Month) Alarm Time(hh:mm:ss) Alarm

PnP/PCI Configurations

Reset Configuration Data Resources Controlled By IRQ Resources

Hardware Monitor Setup

Reset Case Open Status CPU Temperature CPU Fan Speed System Fan Speed CPU Fan Fault De tect SYS Fan Fault Detect

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save Setting and Exit

Exit Without Saving

Note: See Computer Setup (F10) Utility Guide on the Library CD.

HP dx2700, dx2708 Illustrated Parts Map

Specifications and Main Features

Frequently Asked Questions

User Manual