HP D2835S, D2835A, D2836A User Manual

0 (0)
HP D2835A
HP D2835S
HP D2836A
HP Ultra VGA 1280
17-inch Color Displays
15.7 inch Viewable Image
User’s Guide
17-Zoll-Farbbildschirme
15.7 Zoll Bildanzeige
Benutzerhandbuch
Moniteurs couleur 17 pouces
Affichage 15,7 pouces
Pantallas de color de 17 pulgadas
15.7 pulgadas de imagen visualizada
Manual del Usuario Léase esto primero
Video a colori da 17 pollici
15.7 effetivi per l’immagine
Manuale utente
Notice
The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the impl ied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett­Packard. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
Hinweis
Inhaltliche Änderungen vorbehalten. Hewlett-Packard übernimmt keine Garantie welcher Art auch immer für diese Ausrüstung, einschließlich der (doch nicht begrenzt auf die) Qualitätsgarantie und die Garantie bezüglich Eignung für einen bestimmten Zweck. Hewlett-Packard haftet nicht für in dieser Dokumentation enthaltene Fehler oder für unbeabsichtigte oder indirekte Schäden in Verbindung mit der Lieferung, der Leistung oder der Benutzung der Ausrüstung. Hewlett-Packard übernimmt keine Haftung fur den Betrieb oder die Zuverlässigkeit seiner Software, wenn diese auf Hardware benutzt wird, die nicht von Hewlett-Packard geliefert wurde. Dieses Dokument enthalt proprietäre Informationen, die durch das Copyright geschützt sind. Alle Rechte vorbehalten. Dieses Dokument darf ohne vorherige schriftliche Genehmigung der Hewlett-Packard Company weder ganz noch teilweise fotokopiert, reproduziert oder übersetzt werden.
Avertissement
Les informations contenues dans ce document peuvent être modifiées sans préavis. Hewlett-Packard ne donne aucune garantie de quelque sorte que ce soit concernant, sans que ce soit limitatif, les garanties implicites de qualité commerciale de ce matériel, ou la bonne adaptation de celui-ci à un usage particulier. Hewlett-Packard n’est pas responsable des erreurs pouvant apparaître dans ce manuel et n’est pas non plus responsable des dommages directs ou indirects résultant de l’équipement, des performances et de l’utilisation de ce matériel. Hewlett-Packard ne saurait être tenu pour responsable de l’utilisation et de la fiabilité de son logiciel sur des matériels non fournis par Hewlett-Packard. Les informations contenues dans ce document sont originales et protégées par copyright. Tous droits réservés. L’acheteur s’interdit en conséquence de les photocopier, de les reproduire ou de les traduire dans toute autre langue, sauf accord préalable et écrit de Hewlett-Packard.
Aviso
La información contenida en este documento está sujeta a cambios sin previo aviso. Hewlett-Packard no ofrece ningún tipo de garantía con respecto a este material, incluyendo, pero sin limitarse a, las garantías implícitas de comerciabilidad e idoneidad para un fin determinado. Hewlett-Packard no asume responsabilidad alguna por los posibles errores contenidos o por los daños casuales o emergentes relacionados con el suministro, funcionamiento o uso de este material. Hewlett-Packard no asume responsabilidad alguna por el uso o fiabilidad de su software en equipos que no hayan sido fabricados por Hewlett-Packard. Este documento contiene información patentada, protegida por las leyes del copyright. Reservados todos los derechos. Ninguna parte de este documento puede ser fotocopiada, reproducida o traducida a otro idioma sin la autorización previa y por escrito de Hewlett-Packard Company.
Avviso
Le informazioni contenute in questo documento sono soggette a cambiamento senza preavviso. Hewlett-Packard non rilascia garanzie di alcun tipo riguardo a questo materiale, comprese le garanzie implicite di commerciabilità e di idoneità per uno scopo particolare. Hewlett-Packard non sarà ritenuta responsabile per errori contenuti in questo documento, né per danni accidentali o conseguenti alla fornitura, alle prestazioni o all’uso di questo materiale. Hewlett-Packard non si assume alcuna responsabilità riguardo all’uso o all’affidabilità del proprio software su apparecchiature di altri produttori. Questo documento contiene informazioni di proprietà protette da copyright. Tutti i diritti sono riservati. Nessuna parte di questo documento può essere fotocopiata, riprodotta o tradotta in un’altra lingua senza un precedente consenso scritto di Hewlett-Packard Company.
Hewlett-Packard France Commercial Desktop Computing Division 38053 Grenoble Cedex 9 France
© 1997 Hewlett-Packard Company
Francais
English.................................................... Chapter 1
Deutsch .................................................. Kapitel 2
Français.................................................. Chapitre 3
Español................................................... Capítulo 4
Italiano................................................... Capitolo 5
1
Full scan screen that gives an edge to edge image
0.28 mm dot pitch for excellent graphics
Anti-glare, anti-static, multilayer screen coating
On/Off switch
Drop-down control panel used for image adjustment
Status indicator
HP D2835A, HP D2835S, HP D2836A 17-inch Color Displays
15.7-inch Viewable Image
User’s Guide
HP Ultra VGA 1280 User’s Guide
Important Safety Instructions
Important Safety Instructions
Before you plug in your new display, read these important safety instructions.
WARNING
Connect the display only to a grounded power outlet. Use the power cord supplied with the display or one with a properly grounded plug. Ensure the cable meets your country’s standards for safety.
This display operates on all power systems, including “IT” power systems. To completely disconnect power at the display, remove the power cord from the power outlet. Ensure that the power outlet is easily accessible.
The display is quite heavy (the weight is shown in the technical specifications). We recommend you ask the assistance of a second person when lifting or moving it.
USA and Canada
If the power cord is not supplied with your display, select the proper power cord according to your national electric safety codes.
USA: use a UL Listed detachable power cord.
Canada: use a CSA certified detachable power cord.
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un cordon secteur en accord avec votre code électrique national.
USA: utiliser un cordon secteur UL Liste.
Canada: utiliser un cordon secteur certifié CSA.
2 English
HP Ultra VGA 1280 User’s Guide
What Your New Display Offers
What Your New Display Offers
The HP Ultra VGA 1280 display is a 17-inch (15.7-inch viewable image), high resolution, multi-synchronous color display. Multi-synchronous means that the display supports a range of video modes. It is optimized to be used with all Hewlett-Packard PCs.
Your HP D2835A, D2535S, and D2836A color displays have the following features:
A 17-inch flat square tube, with a 15.7-inch viewable image, and
0.28 mm dot pitch for excellent graphics. Anti-glare, multilayer coating to minimize reflection. Support of video modes up to Ultra VGA 1024 at 85 Hz refresh rates, and
up to Ultra VGA 1280 using a 60Hz refresh rate. Image adjustment using onscreen menus. Includes color adjustment and
image rotation controls to optimize the quality and position of the image. Display power management system ( VESA1 standard) controlled from
suitably equipped HP Vectra PCs to automatically reduce the power consumption of the display. Complies with the Energy Star Computers Program initiated by the US EPA specification for energy efficient displays. Display Plug and Play capability (VESA DDC1/2B standard) that enables
the display to identify itself to suitably equipped HP Vectra PCs. Compliance with ISO 9241-3 and ZH-1/618 ergonomic standards.
Your HP D2835A and D2835S complies with MPRII guidelines for upper
limits of electrical and electrostatic emissions, from the Swedish National Board for Measurement and Testing. Your HP D2836A complies with the TCO4 ‘92 and TCO 95 guidelines for
low frequency electrical and magnetic fields, which require an even lower level of emissions than the MPR-II recommendations.
Your
display complies with Blue Angel and E2000
HP D2836A
environmental requirements.
2
and the Swedish NUTEK3
1. VESA is the Video Electronics Standards Association
2. The US EPA is the United States Environmental Protection Agency
3. NUTEK is the Swedish National Board for Industrial and Technical Development
4. Swedish Confederation of Professional Employees
English 3
HP Ultra VGA 1280 User’s Guide
Setting Up Your Display
Setting Up Your Display
Where to Place the Display
Place your display on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, and sources of electromagnetic fields. Sources of electromagnetic fields include transformers, motors, and other displays.
Connecting the Cables
Before you connect any cables, refer to the safety instructions at the
1
beginning of this manual and make sure your PC and display are switched off.
Connect the video cable (it has a 15-pin plug) to the video outlet on
2
your PC. Tighten the thumbscrews on the plug.
Connect the power cord to the display.
3
Plug the power cord into the power outlet.
4
Video cable
Power cords
NOTE The location of your PC’s video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your PC, if necessary.
4 English
HP Ultra VGA 1280 User’s Guide
Using Your Display
Using Your Display
The on/off switch is on the front of the display.
You can adjust the quality, position, size and shape of the displayed image using the drop-down control panel on the front of the display.
On/Off Switch
Push panel to open
Control buttons
Open the control panel by pushing down on the panel cover, as indicated above.
Pressing a control button displays an onscreen menu that contains information about the display’s current setting(s) for the option selected; for example, the current position or size of the viewable image.
Certain control buttons have dual functions when pressed twice. Refer to the information on the following pages for more details.
English 5
HP Ultra VGA 1280 User’s Guide
Using Your Display
Adjusting the Quality of the Displayed Image
CONTRAST
To adjust the contrast (image white level), use this option. Contrast is the difference in brightness between the dark and light parts of the displayed image.
BRIGHTNESS
To adjust the overall picture brightness (image black level), use this option. Set so that the dark areas of the displayed image remain black.
DEGAUSS
To degauss the display, use this option. Degaussing keeps the display free from unwanted magnetism that can result in color impurity.
Or,
To revert to the default settings for all video modes, press this control button for at least five seconds.
CAUTION This option deletes the user’s preferred settings and reverts to the those
preset at the factory. If this option is used, you will need to make any preferred user settings again.
COLOR TEMP.
To adjust the tint of your display, press and use the and adjustment controls to select between the two preset options.
RECALL
Adjusting the Size, Shape and Position of the Displayed Image
To revert to the default settings of the current video mode, press this button for several seconds or until the light indicator changes to green.
To adjust the horizontal or vertical size of the displayed image, press
once, and use the , , and adjustment controls.
To adjust the horizontal or vertical position of the displayed image, press once, and use the , , and adjustment controls.
To adjust the displayed image if its vertical edges appear to bow in or out, press once and reshape using the and adjustment controls.
6 English
HP Ultra VGA 1280 User’s Guide
Using Your Display
To adjust the displayed image if its vertical edges do not appear parallel, press once and select the trapezoid option using the adjustment controls. Use the and control buttons again to correct for any distortion.
To adjust the displayed image if its vertical edges appear tilted, press
twice, and reshape using the and adjustment controls.
Depending on the orientation of your display, for example, whether it faces north or south, you may experience some rotation of the image. This effect is due to the influence of the earth magnetic field and is normal for all displays. To adjust the displayed image if it appears to be rotated, press twice and select the tilt option using the adjustment controls. Use the and adjustment controls again to re-orient the displayed image.
SETTING INFORMATION
To obtain information on the video modes, image refresh rates and screen resolutions supported by your display, press twice and use
and to scroll through the list.
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen resolution of your PC. The higher the screen resolution, the more
information you can see on the screen. It is recommended that you use a resolution of 1024 a large amount of displayed information, and a flicker-free image.
You can make adjustments to the displayed image and they are automatically saved for the resolution you are using. For example, if you adjust your display when working in SVGA those settings are saved for SVGA. If you then work in VGA and change the image settings, they are saved for VGA. The next time you switch back to SVGA, your previous settings are used automatically.
To find out which resolutions are supported by your display, refer to “What Video Modes are Supported” on page 9. To change the screen resolution, please refer to the manual that came with your PC or your operating system documentation, if necessary.
×
768 at 85 Hz. This gives easy-to-read characters,
English 7
HP Ultra VGA 1280 User’s Guide
Using Your Display
Your display has a Plug and Play capability (VESA DDC1/2B standard) that enables it to identify itself to suitably equipped HP Vectra PCs. This will automatically give you the best refresh rate for the resolution that you have set.
Minimizing Eye Strain
To avoid screen flicker and minimize eye strain, use the highest supported image refresh rate for the chosen resolution. It is recommended that you use a refresh rate of 85 Hz. The image refresh rate is the number of times per second that the image is refreshed.
To find out which image refresh rates are supported by your display, refer to “What Video Modes are Supported” on page 9. To set the image refresh rate (also known as the vertical frequency), refer to the manual that came with your PC or your operating system documentation, if necessary. If your PC supports Plug and Play, it will automatically select the best refresh rate for the screen resolution you have set.
Minimizing Energy Consumption
If your PC supports VESA display power management (available on many HP Vectra PCs), you can minimize the power consumed by the display. There are two power saving modes:
Standby mode1 (uses less than 15 W). In this mode, the display’s
front panel indicator light is amber/green blinking. Sleep mode2 (uses less than 5 W). In this mode, the display’s front
panel indicator light is amber blinking.
To set these power saving modes, refer to the manual that came with your PC. If your screen is not displaying an image, check the front panel indicator light first — your display may be in a power saving mode.
1. Standby mode is activated when vertical sync is cut by the video controller.
2. Sleep mode is activated when both vertical and horizontal sync are cut by the video controller.
8 English
HP Ultra VGA 1280 User’s Guide
What Video Modes are Supported
What Video Modes are Supported
Your display comes with the preset modes shown in the table below. It also supports intermediate video modes. With the intermediate modes, the displayed image may need to be optimized using the adjustment controls. All modes are non-interlaced.
Screen Resolution Image Refresh Rate Video Solution
640×400 70 Hz VGA/DOS 640×480 75 Hz Ergonomic VGA 640×480 85 Hz Ergonomic VGA 800×600 75 Hz Ergonomic Super VGA
800×600 85Hz Ergonomic Super VGA 1024×768 70 Hz Ergonomic Ultra VGA 1024 1024×768 75 Hz Ergonomic Ultra VGA 1024 1024×768 85 Hz Ergonomic Ultra VGA 1024
1280×1024 60 Hz Ultra VGA 1280
CAUTION Selecting a screen resolution/image refresh rate combination higher
than 1280x1024 at 60Hz can damage your display.
English 9
PICTURE TUBE
INPUT SIGNAL
INTERFACE
HP Ultra VGA 1280 User’s Guide
Technical Specifications
Technical Specifications
Size 17-inch flat screen/ 15.7-inch viewable image Phosphorous Red, Green, Blue short persistence Dot pitch 0.28 mm Face Plate Anti-glare, multilayer coating Video 0.660 Vp p analog RGB Synchronization Separated H/V (TTL level), H/V mixed (TTL level) Input Connector 15-pin mini D-SUB
SCANNING FREQUENCY
MAX. RESOLUTION (H
WARM-UP TIME
PIXEL CLOCK
IMAGE SIZE
POWER SOURCE
OPERATING ENVIRONMENT
CABINET DIMENSIONS
WEIGHT
TILT/SWIVEL STAND
×
Horizontal 30 to 69 kHz Vertical 50 to 160 Hz 1280 ×1024 (60 Hz)
V)
30 minutes to reach optimum performance level
110 MHz
1
Standard size Maximum size: 320(H) x 240(V) mm AC 90 to 264 V, 47 to 63 Hz, 100W (max), less than 15 W in Standby mode, less than 5 W in Sleep mode,
less than 1 W when switched off. Temperature 5 °C to 40 °C (operating)
Humidity 5% RH through 90% RH (without condensation) 425(H) × 424(W) × 444(D) mm (with stand)
19 kg
Tilt Angle - 5° to +13 Swivel Angle
:306(H) x 230(V) mm
1. Use the standard image sizes to avoid distortion of the displayed image.
- 40 °C to +65 °C (storage)
°
±45°
10 English
HP Ultra VGA 1280 User’s Guide
Care and Cleaning
Care and Cleaning
Do not place anything on top of the display. Doing so may block the display vents and cause damage to the display due to overheating.
Do not let liquid get on or into the display.
To maximize screen life and prevent damage to the picture tube (such as burned phosphor due to leaving the same image on the screen for a long time), it is recommended that you:
Use the display power management system (on HP Vectra PCs) or a
screen saver program.
Avoid setting contrast and brightness to their maximum levels for
prolonged periods.
If you do not have a power management system or a screen saver
program, switch the display off or reduce the brightness and contrast to minimum levels when the display is not in use.
Your display has an anti-glare, anti-static screen coating. To prevent damage to the display screen’s coating, use a regular household glass cleaner when cleaning the screen. To clean the screen:
Switch the display off and remove the power plug (pull the plug, not
1
the cable).
Wet a soft cotton cloth with the cleaning solution and gently wipe the
2
screen. Do not spray cleaner onto the screen because the cleaner may drip inside the display.
Dry with a clean, soft cotton cloth.
3
Do not use cleaning solutions containing fluoride, acids, or alkalis.
English 11
HP Ultra VGA 1280 User’s Guide
Environmental Information
Environmental Information
HP has a strong commitment toward the environment. Your HP display has been designed to respect the environment as much as possible.
HP can also take back your old display for recycling when it reaches the end of its useful life.
In fact, HP has a product take-back program in several countries. The collected equipment is sent to of HP’s recycling facilities in Europe or the USA. As many parts as possible are reused. The remainder is recycled. Special care is taken for batteries and other potentially toxic substances, which are reduced to non-harmful components through a special chemical process. If you require more details about HP’s product take-back program, contact your dealer or your nearest HP Sales Office.
The cathode ray tube used in this display does not contain cadmium.
Hardware Warranty
This is your HP Display Hardware Warranty Statement. Warranty terms may be different in your country. If so, your Authorized HP Dealer or Hewlett-Packard Sales and Service Office can give you details.
Limited Display Hardware Warranty
Model Warranty Period Service provided
Model D2835S 1 year On-site service
Model D2835A Model D2836A
12 English
3 years -- unless original end-user customer has otherwise agreed to a shorter period of warranty at the time of purchase.
On-site service for 1st year, and return to an HP or repair-authorized reseller service-center for the following two years.
HP Ultra VGA 1280 User’s Guide
Hardware Warranty
Hewlett-Packard (HP) warrants this display hardware product against defects in materials and workmanship for the applicable warranty period stated above, commencing from the date of purchase by you, the original end-user customer. If you return this display hardware product with a defect as defined above, during the warranty period, to an HP-authorized reseller or service center, HP will either, at its option, repair or replace the defective product with a new or equivalent-to-new unit of the same or equivalent model. Should HP be unable to repair or replace the product within a reasonable amount of time, your alternate exclusive remedy shall be a refund of the purchase price upon return of the product.
If you purchased this display hardware product for use with an HP Vectra personal computer, please refer to the terms and conditions of the HP Hardware Warranty statement provided with your HP Vectra personal computer, including limitations, your responsibilities and method for obtaining warranty service.
Limitation of Warranty
The above warranty shall not apply to defects resulting from: misuse (including "burned" screens); unauthorized modification; operation or storage outside the environmental specifications for this display product; in-transit damage; improper maintenance; or defects resulting from use of non-HP software, accessories, media, supplies, consumables, or such items not designed for use with this product.
HP MAKES NO OTHER EXPRESS WARRANTY, WHETHER WRITTEN OR ORAL, WITH RESPECT TO THIS PRODUCT. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY SET FORTH ABOVE.
Some states or provinces do not allow limitations on warranty, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, or province to province.
Limitation of Liability and Remedies
THE REMEDIES PROVIDED ABOVE ARE YOUR SOLE AND EXCLUSIVE REMEDIES. IN NO EVENT SHALL HP BE LIABLE FOR ANY OTHER DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER BASED ON WARRANTY, CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.
The foregoing limitation of liability shall not apply in the event that any HP product sold hereunder is determined by a court of competent jurisdiction to be defective and to have directly caused bodily injury, death, or property damage; provided, that in no event shall HP's liability for property damage exceed the greater of $50,000 or the purchase price of the specific product that caused such damage.
Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
English 13
HP Ultra VGA 1280 User’s Guide
Regulatory Information
Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: HEWLETT-PACKARD
Manufacturer’s Address: 5, Avenue Raymond Chanas
38320 Eybens, FRANCE
declares, that the product:
Product Name: Ultra VGA 1280 17-inch Display
Model Number: D2835A, D2835S, D2836A
conforms to the following Product Specifications:
International: IEC 950:1991 + A1 + A2
SAFETY
European: EN 60950:1992 + A1 + A2
CISPR 22:1993 / EN 55022:1994 - Class B
EMC
EN 50082-1:1992
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD IEC 801-3:1984 - 3V/m IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power lines
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987 IEC 1000-3-3:1994 / EN 61000-3-3:1995
Supplementary information: Directive 89/336/EEC amended by the Directive 93/68/EEC, and carries the CE-marking accordingly.
Grenoble, April 1997. Quality Manager
the product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC
Jean Marc JULIA
14 English
WARNING
HP Ultra VGA 1280 User’s Guide
Regulatory Information
Notice for the USA: FCC Statement
Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one of more of the following measures:
Relocate the radio or television antenna.
Move the computer away from the radio or television.
Plug the computer into a different electrical outlet, so that the computer and the radio or television are on separate electrical circuits.
Make sure that all your peripheral devices are also FCC Class B certified.
Make sure you use only shielded cables to connect peripheral devices to your computer.
Consult your computer dealer, Hewlett-Packard, or an experienced radio/television technician for help.
Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you received with your system. Cables used with this computer must be properly shielded to comply with the requirements of the FCC.
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment.
X-Ray Radiation Notice
When operating, this product emits x-rays; however, it is well shielded and meets the safety and health requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health and Safety Act of the United States.
Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure safe operation. Only qualified personnel should perform any internal adjustments as specified in the service manual for this product.
Replace the cathode ray tube with an identical CRT only.
General Notice
The HP D2835A, D2835S, and D2836A 17-inch Color Displays have been tested according to MPR 1990:8 for Emission properties and meets the guidelines as given by MPR 1990:10 (2.01 - 2.04).
English 15
HP Ultra VGA 1280 User’s Guide
Regulatory Information
Notice for Japan
Notice for Canada
This Class “B” digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences du règlement sur le matériel brouilleur du Canada.
Notice for China
16 English
2
Vollbildschirm für eine scharfe Bildwiedergabe bis in die Randbereiche
0,28 mm Punktdichte ­besonders fein für hervorragende grafische Darstellungen
Antistatische Entspiegelungs­Mehrfachbeschichtung
An/Aus-Schalter
LED-Anzeige
Bedienfeld für die Bildanpassung
HP D2835A, HP D2835S und HP D2836A Farbbildschirm 17 Zoll 15,7-Zoll-Bildanzeige
Benutzerhandbuch
HP Ultra VGA 1280 Benutzerhandbuch
Wichtige Sicherheitshinweise
Wichtige Sicherheitshinweise
Bevor Sie Ihren neuen Bildschirm anschließen, lesen Sie diese wichtigen Sicherheitshinweise durch.
WARNUNG Schließen Sie den Bildschirm nur an eine geerdete Netzsteckdose an.
Benutzen Sie das mitgelieferte Netzkabel oder ein anderes, mit einem sachgemäß geerdeten Stecker ausgestattetes Kabel. Überprüfen Sie, ob das Kabel den Sicherheitsbestimmungen Ihres Landes entspricht.
Dieser Bildschirm ist für den Betrieb mit allen Netzsystemen geeignet, einschließlich IT-Netzsystemen. Um die Stromversorgung des Bildschirms vollständig zu unterbrechen, ziehen Sie das Netzkabel aus der Netzsteckdose. Sorgen Sie dafür, daß die Netzsteckdose leicht zugänglich ist.
Der Bildschirm ist ziemlich schwer (genaue Angaben zum Gewicht finden Sie in den technischen Daten). Es ist deshalb empfehlenswert, den Bildschirm nur mit Hilfe einer weiteren Person zu tragen bzw. zu deplazieren.
2Deutsch
HP Ultra VGA 1280 Benutzerhandbuch
Die Vorteile dieses Bildschirms
Die Vorteile dieses Bildschirms
Der Bildschirm HP Ultra VGA 1280 ist ein hochauflösender, mehrfachsynchroner 17-Zoll-Farbbildschirm (15,7 Zoll Bildanzeige). Mehrfachsynchron bedeutet, daß der Bildschirm unterschiedliche Video-Modi unterstützt. Er ist kompatibel mit allen Hewlett-Packard-PCs.
Die Farbbildschirme HP D2835A, D2535S und D2836A weisen folgende Leistungsmerkmale auf:
Eine 17-Zoll-Flachbildröhre mit einer Bildanzeige von 15,7 Zoll und einer Punktdichte von 0,28 mm für grafische Darstellungen hervorragender Qualität. Entspiegelungs-Mehrfachbeschichtung.
Unterstützung der Video-Modi Ultra VGA 1024 (Bildwiederholungsfrequenz 85 Hz) und Ultra VGA 1280 (Bildwiederholungsfrequenz 60 Hz).
Bildanpassung mit Hilfe von Bildschirmmenüs. Dazu gehört die Steuerung von Farbanpassung und Bildrotation zur Optimierung von Bildqualität und
-position.
Stromverbrauchregelung (VESA entsprechend ausgerüsteten HP Vectra PCs verwaltet und ermöglicht eine automatische Reduzierung des Stromverbrauchs Ihres Bildschirms. Konformität zum Energy Star Computers Program der US-Behörde EPA sowie zur schwedischen NUTEK Bildschirme.
Plug-and-Play-Funktionalität des Bildschirms (VESA-Standard DDC1/2B), durch die sich der Bildschirm selbst für entsprechend ausgestattete HP Vectra PCs identifizieren kann.
Übereinstimmung mit den Ergonomie-Normen ISO 9241-3 und ZH-1/618.
Ihr HP D2835A bzw. D2835S entspricht den MPR-II-Richtlinien des schwedischen Meß- und Testausschusses, in denen die Grenzwerte für elektrische und elektrostatische Emissionen festgelegt sind.
Ihr HP D2836A entspricht den Spezifikationen TCO elektromagnetische Niedrigfrequenzfelder, die noch geringere Emissionswerte fordern als die MPR-II-Empfehlungen.
Ihr Bildschirm HP D2836A entspricht den Umweltschutzanforderungen Blue Angel und E2000.
1
-Standard). Dieses System wird von den
3
-Spezifikation für energiesparende
4
‘92 und TCO 95 über
2
1. VESA: (Standardisierungsorganisation im Bereich Video-Elektronik)
2. US EPA: United States Environmental Protection Agency (US-Behörde für Umweltschutz)
3. NUTEK: Schwedischer Nationalausschuß für Entwicklung in Industrie und Technik
4. Swedish Confederation of Professional Employees
Deutsch 3
HP Ultra VGA 1280 Benutzerhandbuch
Aufstellen des Bildschirms
Aufstellen des Bildschirms
Standortwahl für den Bildschirm
Stellen Sie Ihren Bildschirm auf einer flachen, soliden Unterlage ab. Sorgen Sie dafür, daß die Betriebsumgebung weder hohen Temperaturen
noch hoher relativer Luftfeuchtigkeit noch Erzeugern elektromagnetischer Felder ausgesetzt ist. Zu den Erzeugern elektromagnetischer Felder gehören Transformatoren, Motoren und weitere Bildschirme.
Anschließen der Kabel
Bevor Sie mit dem Anschließen der Kabel beginnen, lesen Sie die
1
Sicherheitshinweise zu Beginn dieses Handbuchs durch, und stellen Sie sicher, daß Computer und Bildschirm ausgeschaltet sind.
Schließen Sie das VGA-Kabel (mit 15-poligem Stecker) an den
2
Video-Anschluß Ihres Computers an. Ziehen Sie die Drehschrauben auf dem Stecker fest.
HINWEIS
Schließen Sie das Netzkabel an den Bildschirm an.
3
Stecken Sie das Netzkabel in eine Netzsteckdose ein.
4
Videokabel (15-poliger Stecker)
Netzkabel
Die Positionierung des Videoanschlusses auf Ihrem PC muß nicht unbedingt mit der Abbildung übereinstimmen. Schlagen Sie, falls erforderlich, im Handbuch Ihres PCs nach.
4Deutsch
HP Ultra VGA 1280 Benutzerhandbuch
Bedienung des Bildschirms
Bedienung des Bildschirms
Der An/Aus-Schalter befindet sich auf der Vorderseite des Bildschirms. Unter Verwendung des Dropdown-Bedienfelds auf der Bildschirmvorderseite
können Sie Qualität, Position, Größe und Form des angezeigten Bildes anpassen.
An/Aus-Schalter
Zur öffnung des Bedienfelds einfach darauf drücken
Einstelltasten
Das Bedienfeld wird geöffnet, indem die Bedienfeld-Abdeckung wie oben gezeigt heruntergedrückt wird.
Durch das Drücken einer Einstelltaste erscheint ein Bildschirmmenü mit Informationen über die aktuelle(n) Bildschirmeinstellung(en) für die jeweils gewählte Option. Beispiel: Die aktuelle Position oder Größe des angezeigten Bildes.
Einige der Steuertasten weisen Doppelfunktionen auf, wenn Siezweimal gedrückt werden. Auf den folgenden Seiten finden Sie hierzudetaillierte Informationen.
Deutsch 5
HP Ultra VGA 1280 Benutzerhandbuch
Bedienung des Bildschirms
Anpassung der Bildqualität
KONTRAST
HELLIGKEIT
ENTMAGNET
VORSICHT
FARBWAHL
Zur Einstellung des Kontrastes (Weißstufe) benutzen Sie diese Option. Der Kontrast ist der Helligkeitsunterschied zwischen den dunklen und hellen Bereichen des angezeigten Bildes.
Zur Einstellung der allgemeinen Helligkeit des Bildes (Schwarzstufe) benutzen Sie diese Option. Stellen Sie die Helligkeit so ein, daß die dunklen Bereiche der Bildanzeige schwarz bleiben.
Zur Entmagnetisierung des Bildschirms benutzen Sie diese Option. Hierdurch wird jeder unerwünschte Magnetismus vermieden, der zu Farbverunreinigungen führen könnte.
Oder,
Drücken Sie diese Steuertaste, und halten Sie sie mindestens fünf Sekunden lang gedrückt, um für alle Video-Modi wieder zu den Standardeinstellungen zurückzukehren.
Diese Option löscht alle anwenderspezifischen Einstellungen und bedingt eine Rückkehr zu den werkseitig vordefinierten Einstellungen. Wird diese Option verwendet, so müssen anschließend die individuell anzupassenden Einstel­lungen neu definiert werden.
Zur Einstellung der Farbmischung für Ihre Anzeige drücken Sie . Mit Hilfe der Einstelltasten und können Sie zwischen den zwei verfügbaren Optionen zur Voreinstellung wählen.
RECALL
WIDERRUF
Anpassung der Bildgröße, -form und -position
Zur Rückkehr zu den Standardeinstellungen des aktuellen Video-Modus drücken Sie diese Taste, und halten Sie sie einige Sekunden lang niedergedrückt bzw. so lange, bis die LED-Anzeige grün aufleuchtet.
Zur Einstellung der horizontalen oder vertikalen Größe des angezeigten Bildes drücken Sie einmal die Taste . Verwenden Sie dann die Einstelltasten ,
, und .
Zur Einstellung der horizontalen oder vertikalen Position des angezeigten Bildes drücken Sie einmal die Taste . Verwenden Sie dann die Einstelltasten , , und .
6Deutsch
HP Ultra VGA 1280 Benutzerhandbuch
Bedienung des Bildschirms
Zur Berichtigung des angezeigten Bildes, falls dessen vertikale Ecken nach innen oder außen gebogen erscheinen, drücken Sie einmal die Taste . Verwenden Sie zur Berichtigung der Bildform dann die Einstelltasten
und .
Zur Berichtigung des Bildes, falls dessen vertikale Ecken nicht parallel angezeigt werden, drücken Sie einmal die Taste . Wählen Sie dann mit Hilfe der Einstelltasten die Option Trapezoid. Verwenden Sie erneut die Einstelltasten und , um eventuelle Bildverzerrungen zu beheben.
Zur Berichtigung des angezeigten Bildes, falls dessen vertikale Ecken seitlich verzerrt erscheinen, drücken Sie zweimal die Taste . Verwenden Sie zur Berichtigung der Bildform dann die Einstelltasten und .
Je nach der Ausrichtung Ihres Bildschirms, d.h. ob dieser z.B. in Richtung Norden oder Süden zeigt, kann es zu einer leichten Drehung des Bildes kommen. Dies läßt sich auf die Einwirkung des irdischen Magnetfeldes zurückführen und ist bei allen Bildschirmen zu beobachten. Zur Berichtigung des angezeigten Bildes, falls dieses gedreht bzw. gekippt angezeigt werden sollte, drücken Sie zweimal die Taste , und wählen Sie über die Einstelltasten die Option Neigungswinkel. Verwenden Sie zur Neuausrichtung des angezeigten Bildes erneut die Einstelltasten und .
EINSTELLUNGS-
INFORMATIONEN
Zur Anzeige von Informationen über die unterstützten Video-Modi, Bildauffrischungsfrequenzen und Bildschirmauflösungen drücken Sie zweimal die Taste . Verwenden Sie dann die Tasten und , um sich durch die Infoliste zu bewegen.
Bestimmung des Umfangs der angezeigten Informationen
Wenn Sie den Umfang der angezeigten Informationen einstellen möchten, müssen Sie die Bildschirmauflösung Ihres PCs ändern. Je höher die Bildschirmauflösung, umso mehr Informationen werden auf dem Bildschirm angezeigt. Wir empfehlen Ihnen eine Auflösung von 1024 × 768 bei 85Hz bzw. Dadurch erhalten Sie leicht lesbare Zeichen, einen hohen Informationsgehalt für die Bildanzeige sowie ein flimmerfreies Bild.
Sie können das angezeigte Bild anpassen. Diese Anpassungen werden automatisch für die von Ihnen verwendete Auflösung gespeichert. Wenn Sie beispielsweise Ihren Bildschirm anpassen, wenn Sie in SVGA arbeiten, dann werden diese Einstellungen für SVGA gespeichert. Wenn Sie anschließend in VGA arbeiten und die Bildeinstellungen ändern, werden sie für VGA gespeichert. Wenn Sie dann das nächste Mal zu SVGA zurückkehren, werden die vorherigen Einstellungen automatisch verwendet.
Deutsch 7
Loading...
+ 61 hidden pages