HP Compaq Presario V3000 CTO, Compaq Presario V3000T CTO, Compaq Presario V3000Z CTO, Compaq Presario V3001XX, Compaq Presario V3002TU User Guide

Drives

User Guide

© Copyright 2006 Hewlett-Packard
Development Company, L.P.

The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.

First Edition: May 2006

Document Part Number: 412259-001

Table of contents

1 Drive care

2 Drive light

3 Hard drives

Replacing the hard drive ...................................................................................................................... 5

4 Optical drives

Inserting an optical disc ...................................................................................................................... 10

Removing an optical disc (with power) ............................................................................................... 11

Removing an optical disc (without power) .......................................................................................... 12

Avoiding standby or hibernation ......................................................................................................... 13

Index ................................................................................................................................................................... 15

ENWW iii

iv ENWW

1 Drive care

Drives are fragile computer components that must be handled with care. Refer to the following cautions
before handling drives. Additional cautions are included with the procedures to which they apply.

CAUTION To reduce the risk of damage to the computer, damage to a drive, or loss of

information, observe these precautions:

Initiate standby, and allow the screen to clear, before you move a computer or external hard drive
from one location to another.

Before handling a drive, discharge static electricity by touching the unpainted metal surface of
the drive.

Do not touch the connector pins on a removable drive or on the computer.

Handle a drive carefully; do not drop or compress the drive.

Before removing or inserting a drive, shut down the computer. If you are unsure whether the
computer is off or in hibernation, turn the computer on, and then shut it down through the operating
system.

Do not use excessive force when inserting a drive into a drive bay.

Do not type on the keyboard or move the computer when the optical drive is writing to a medium.
The write process is sensitive to vibration.

When the battery pack is the only source of power, ensure that the battery pack is sufficiently
charged before writing to a medium.

Avoid exposing a drive to temperature or humidity extremes.

Avoid exposing a drive to liquids. Do not spray it with cleaning products.

Remove the medium from a drive before removing the drive from the drive bay, or traveling with,
shipping, or storing a drive.

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective
packaging and label the package “FRAGILE.”

Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport
walk-through devices and security wands. The airport security devices that check carry-on
luggage, such as conveyor belts, use x-rays instead of magnetism and will not damage a drive.

ENWW 1

2 Chapter 1 Drive care ENWW

2 Drive light

The drive light blinks when either the primary hard drive or an optical drive is being accessed.

ENWW 3