HP Compaq Presario S3010AP, Compaq Presario S3020AP, Compaq Presario S3090AP, Compaq Presario S3100AP, Compaq Presario S3100KR Setup Guide

Setting Up
To Record
TV Programs

To record programs from a
television signal source, such as
an antenna, cable TV, or satellite
system, you need to set up your
TV Tuner card:



Connect the TV Tuner to a
television video source.



Set up the remote control.



Install InterVideo WinDVR.

Connecting the TV Tuner

Connectors and cables for TVs
vary. You may need to purchase
the appropriate adapter, splitter,
A/B switch, or combiner to
complete the setup of your
TV tuner card.

1 Disconnect the television signal

source from your TV or VCR
system.

2 Reconnect this cable to the TV

Tuner card Cable/Antenna
Connector on the back of
your PC.

Setting Up the
Remote Control

1 Open the back cover of the

remote control and insert two
AAA batteries (alkaline
batteries are recommended).

2 Connect the remote control

receiver to the USB port on
your computer.

Note:

When using the remote
control, make sure that there
is nothing blocking the path
between the remote control
and the receiver unit.

Installing
InterVideo WinDVR

1 Insert the InterVideo WinDVR

installation CD into the PC
optical drive.

2 Follow the instructions provided

with the CD.

3 After installation is complete,

open InterVideo WinDVR.

4 Follow the WinDVR

configuration wizard to enter
properties, such as screen size,
signal input source, and
channels.