HP Compaq Presario CQ42-203AU, Compaq Presario CQ42-205AU, Compaq Presario CQ42-210AU, Compaq Presario CQ42-218AX, Compaq Presario CQ42-219AX Service Guide

Compaq Presario CQ42 Notebook
PC and HP G42 Notebook PC

Maintenance and Service Guide

SUMMARY

This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides
comprehensive information on identifying computer features, components, and spare parts;
troubleshooting computer problems; and performing computer disassembly procedures.

© Copyright 2010 Hewlett-Packard
Development Company, L.P.

Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel and
Arrandale are trademarks of Intel
Corporation in the United States and other
countries. Microsoft and Windows are U.S.
registered trademarks of Microsoft
Corporation. SD Logo is a trademark of its
proprietor.

The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.

First Edition: April 2010

Document Part Number: 594158-002

MSG revision history

Revision Publication date Description

A April 2010 Edited this guide to include HP G42 Notebook PC and Compaq CQ42

Notebook PC information only.

B October 2010

C December 2010

Added newly supported memory modules to spare parts listings in

●

the following locations:

Mass storage devices on page 36, Sequential part number listing
on page 39, Memory module on page 60.

Added newly supported processors to spare parts listings in the

●

following locations:

Mass storage devices on page 36, Sequential part number listing
on page 39, Processor on page 91.

● Added newly supported system boards to spare parts listings in the

following locations: Computer major components on page 26,

Mass storage devices on page 36, Sequential part number listing
on page 39, System board on page 81.

Added newly supported processors to spare parts listings in the

●

following locations:

Mass storage devices on page 36, Sequential part number listing
on page 39, Processor on page 91.

● Added newly supported system boards to spare parts listings in the

following locations: Computer major components on page 26,

Mass storage devices on page 36, Sequential part number listing
on page 39, System board on page 81

Added newly supported power cord to spare parts listings in the

●

following locations: Miscellaneous Parts, Sequential part number

listing on page 39, Memory module on page 60.

Removed Bluetooth™ references. Bluetooth is not supported.

●

Computer major components on page 26,

Computer major components on page 26,

Computer major components on page 26,

ENWW iii

iv MSG revision history ENWW

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).

ENWW v

vi Safety warning notice ENWW

Table of contents

1 Product description ........................................................................................................................................ 1

2 External component identification .............................................................................................................. 13

Identifying the hardware ..................................................................................................................... 13

Top components ................................................................................................................................. 14

TouchPad .......................................................................................................................... 14

Lights ................................................................................................................................. 15

Button and speakers .......................................................................................................... 16

Keys ................................................................................................................................... 17

Display ............................................................................................................................... 18

Right-side components ....................................................................................................................... 19

Left-side components ......................................................................................................................... 20

Bottom components ........................................................................................................................... 21

Wireless antennas .............................................................................................................................. 22

Additional hardware components ....................................................................................................... 23

3 Illustrated parts catalog ............................................................................................................................... 25

Serial number location ........................................................................................................................ 25

Computer major components ............................................................................................................. 26

Display assembly components ........................................................................................................... 33

Plastics Kit .......................................................................................................................................... 35

Mass storage devices ......................................................................................................................... 36

Miscellaneous parts ............................................................................................................................ 38

Sequential part number listing ............................................................................................................ 39

4 Removal and replacement procedures ....................................................................................................... 45

Preliminary replacement requirements ............................................................................................... 45

Tools required .................................................................................................................... 45

Service considerations ....................................................................................................... 45

Plastic parts ....................................................................................................... 45

Cables and connectors ..................................................................................... 46

Drive handling ................................................................................................... 46

Grounding guidelines ......................................................................................................... 47

ENWW vii

Electrostatic discharge damage ........................................................................ 47

Packaging and transporting guidelines ............................................. 48

Workstation guidelines ..................................................................... 48

Equipment guidelines ....................................................................... 49

Component replacement procedures ................................................................................................. 50

Serial number .................................................................................................................... 50

Computer feet .................................................................................................................... 51

Battery ............................................................................................................................... 52

Hard drive .......................................................................................................................... 53

Optical drive ....................................................................................................................... 56

WLAN module .................................................................................................................... 58

Memory module ................................................................................................................. 60

Keyboard ........................................................................................................................... 62

Top cover ........................................................................................................................... 64

Speaker assembly ............................................................................................................. 67

Power button board ........................................................................................................... 68

TouchPad button board ..................................................................................................... 69

Modem module .................................................................................................................. 70

USB board ......................................................................................................................... 72

Power connector cable ...................................................................................................... 73

Display assembly ............................................................................................................... 74

System board ..................................................................................................................... 81

Optical drive SATA cable and connector ........................................................................... 84

RTC battery ....................................................................................................................... 86

Fan/heat sink assembly ..................................................................................................... 88

Processor ........................................................................................................................... 91

5 Setup Utility ................................................................................................................................................... 95

Computer Setup in Windows 7 ........................................................................................................... 95

Starting Setup Utility .......................................................................................................... 95

Using Setup Utility ............................................................................................................. 95

Changing the language of Setup Utility ............................................................. 95

Navigating and selecting in Setup Utility ........................................................... 96

Displaying system information .......................................................................... 96

Restoring default settings in Setup Utility .......................................................... 97

Exiting Setup Utility ........................................................................................... 98

Setup Utility menus ............................................................................................................ 98

Main menu ........................................................................................................ 98

Security menu ................................................................................................... 98

System Configuration menu .............................................................................. 99

Diagnostics menu .............................................................................................. 99

Computer Setup in Linux .................................................................................................................. 100

Starting Computer Setup ................................................................................................. 100

viii ENWW

Using Computer Setup .................................................................................................... 100

Navigating and selecting in Computer Setup .................................................. 100

Restoring factory settings in Computer Setup ................................................. 101

Computer Setup menus ................................................................................................... 102

File menu ........................................................................................................ 102

Security menu ................................................................................................. 103

Diagnostics menu ............................................................................................ 103

System Configuration menu ............................................................................ 104

6 Specifications .............................................................................................................................................. 107

Computer specifications ................................................................................................................... 107

35.6-cm (14.0-in) display specifications ........................................................................................... 108

Hard drive specifications .................................................................................................................. 109

DVD±RW SuperMulti Double-Layer Drive with LightScribe specifications ....................................... 110

Blu-ray ROM with LightScribe DVD±R/RW SuperMulti DL Drive specifications .............................. 111

System resource specifications ........................................................................................................ 112

7 Backup and recovery .................................................................................................................................. 113

Windows 7 ........................................................................................................................................ 113

Creating recovery discs ................................................................................................... 114

Backing up your information ............................................................................................ 115

Using Windows Backup and Restore .............................................................. 116

Using system restore points ............................................................................ 117

When to create restore points ........................................................ 117

Create a system restore point ........................................................ 117

Restore to a previous date and time ............................................... 117

Performing a recovery ..................................................................................................... 117

Recovering from the recovery discs ................................................................ 118

Recovering from the dedicated recovery partition (select models only) .......... 118

Linux backup and recovery .............................................................................................................. 119

8 Connector pin assignments ....................................................................................................................... 121

Audio-out (headphone) ..................................................................................................................... 121

Audio-in (microphone) ...................................................................................................................... 121

External monitor ............................................................................................................................... 122

RJ-11 (modem) ................................................................................................................................ 123

RJ-45 (network) ................................................................................................................................ 123

HDMI ................................................................................................................................................ 124

Universal Serial Bus ......................................................................................................................... 125

9 Power cord set requirements .................................................................................................................... 127

Requirements for all countries or regions ......................................................................................... 127

Requirements for specific countries or regions ................................................................................ 128

ENWW ix

10 Recycling ................................................................................................................................................... 129

Battery .............................................................................................................................................. 129

Display .............................................................................................................................................. 129

Index ................................................................................................................................................................. 135

x ENWW

1 Product description

Category Description HP G42 HP G42 Compaq

Discrete UMA Discrete UMA Models

Product
Name

HP G42 Notebook

Processors Intel® Arrandale™

i7-620M, 2.66-GHz,

i5-540M, 2.53-GHz,

i5-520M, 2.4-GHz, SC

i5-430M 2.26-GHz

i3-350M, 2.26-GHz 3-

Compaq Presario
CQ42 Notebook PC

PC

SC turbo, 4-MB L3
cache

SC turbo, 3-MB L3
cache

turbo, 3-MB L3 cache

(turbo to 2.53- GHz)
3-MB L3 cache

MB L3 cache

√√√

√√

√√√√

√√√√

√√√√

√√√√

√√√√

Presario

CQ42

Compaq
Presario

CQ42

150-199

Compaq
Presario

CQ42

UMA Models

100-149

i3-330M, 2.13-GHz 3-

MB L3 cache

Intel Pentium™

DC T4400, 2.2-GHz,

800-MHz FSB, 1-MB
L2 cache

DC T4300, 2.1-GHz,

800-MHz FSB, 1-MB
L2 cache

Intel Celeron™

DC T3100, 1.9-GHz,

800-MHz FSB, 1-MB
L2 cache

√√√√

√

√

√

ENWW 1

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

DC T3000, 1.8-GHz

800-MHz FSB, 1-MB
L2 cache

AMD® Phenom™ II

Processor

N620 DDR3-1333 (2

MB 2.8 GHz L2
cache) 35W

DC N640 DC (2.9

GHz 35W)

N660 3.0 GHz 2M √√√√

DC N830 Tri-core 2.1

GHz 1.5M L2 35W

DC N850 2.2 GHz L2

cache

N870 2.3 GHz 1.5 MB √√√√

DC N930 QC 2.0 GHz √√√√

N970 2.2 GHz 2 MB √√√√

√

√√√√

√√√√

√√√√

√√√√

UMA Models

100-149

P650 2.6 GHz 2MB

35W

DC P820 Tri-Core 1.8

GHz 1.5 MB L2 cache
25W

DC P840 1.9 GHz L2

cache

P860 2 GHz 1.5 MB

25W

DC QC P920 1.6 GHz

2M L2 cache 25W

DC P940 DC QC 1.7

GHz L2 cache

DC P950 QC 2.1 GHz

L2 cache 35W

P960 1.8 GHz 2 MB

25W

AMD Turion™ II

Processor

N570 2.7 GHz 2M

35W

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

DC P540 DC 2.4 GHz

L2 cache 25W

√√√√

2 Chapter 1 Product description ENWW

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

DC N550 DC 2.6 GHz

L2 cache 35W

DC N530 DC 2.5GHz

L2 cache 35W

P560 2.5Ghz 2M 35W √√√√

P520 DDR3-1066

MHz

P650 2.6 GHz 2 MB

25W

AMD Athlon™ II

Processor

DC P340 2.2 GHz L2

cache 25W

P360 2.5 GHz 35W √√√√

DC N330 2.3 GHz 1M

L2 cache 35W

DC N350 2.4 GHz L2

cache 35W

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

UMA Models

100-149

N370 2.5 GHz 1 MB

35W

DC N530 DC 2.5 GHz

L2 cache 35W

P320 DDR3-1066

MHz

PROC DC V140 SC

2.3 GHz 25W

Champlain SC

processor V160 2.4
GHz 25W

Champlain V120

512K L2 cache

AMD Sempron™ II

Processor

N120 DDR3-1066

Mhz

Chipset Intel® HM55 Express √√√√

Intel® GL40 √

Southbridge: ICH9m √

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

√√√√

AMD

ENWW 3

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

ATI RS880M

ATI RS880MD

Southbridge - SB820 √√√√

Graphics Intel UMA

(Northbridge)

(Northbridge)

(integrated)/HD
Graphics with shared

video memory
(memory size is
dynamic change):

Up to 251 MB on

●

computers with
1024 MB of
system memory

● Up to 358 MB on

computers with
more than 2048
MB of system
memory

√ √

√

√ √

UMA Models

100-149

4 Chapter 1 Product description ENWW

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Intel UMA

(integrated)/GMA
4500M - GL40
chipset with shared

video memory
(memory size is
dynamic change):

● Up to 1759 MB

for computers
with more than
4096 MB of
system memory
(64 bit)

● Up to 1309 MB

for computers
with more than
4096 MB of
system memory
(32 bit)

Up to 1309 MB

●

for computers
with more than
3072 MB of
system memory

Discrete UMA Discrete UMA Models

150-199

√

UMA Models

100-149

Up to 797 MB for

●

computers with
more than 2048
MB system
memory

Up to 285 MB for

●

computers with
more than 1024
MB of system
memory

ATi Discrete PCI

Express x 16
Graphics

ATi Mobility

●

Radeon Park-LP
S3 package (ATI
Mobility
Radeon™
HD5430 with
512-MB of
dedicated video
memory (64­MB×16 DDR3, 4
pcs, 800-MHz))

√

ENWW 5

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Switchable Discrete

Support for BD or

Graphics

ATi Robson XT

●

(ATI Mobility
Radeon™
HD6370) with
512MB of
dedicated
memory
(64Mx16 DDR3
800 MHz x 4
PCs)

ATi Robson XT

●

(ATI Mobility
Radeon™
HD6370) with
1GB of
dedicated
memory
(128Mx16 DDR3
800 MHz x 4
PCs)

HD-DVD playback
with HD decoder
and DX10 support

Discrete UMA Discrete UMA Models

150-199

√ √

√√√√√

UMA Models

100-149

Panel 35.6-cm (14.0-in) HD

LED BrightView
(1366 x 768)

16:9 wide aspect ratio √√√√√

Memory 2 SODIMM slots √√√√√

Customer-accessible

and upgradable

Supports up to 8 GB

of system memory

DDR3, 1066-MHz,

dual-channel memory
(DDR3 1333 MHz can
be downgraded to
DDR3 1066 MHz)

DDR3, 800-MHz,

dual-channel memory
(DDR3 1333 MHz can
be downgraded to
DDR3 800 MHz)

Supports the following

configurations:

√√√√√

√√√√√

√√√√√

√√√√

√

6 Chapter 1 Product description ENWW

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

● 4096 MB (2048

MB × 2)

● 3072 MB (1024

MB × 1 + 2048
MB × 1)

● 2048 MB (2048

MB × 1)

● 2048 MB (1024

MB × 2)

● 1024 MB (1024

MB × 1)

Hard drives Supports 9.5-mm,

6.35-cm (2.5-in) hard

drive

Serial ATA √√√√√

Supports the following

drives:

● 750 GB, 5400

rpm

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√

UMA Models

100-149

● 640 GB, 5400

● 500 GB, 7200

● 320 GB, 7200

● 250 GB, 7200

● 160 GB, 7200

Optical
drives

SATA √√√√√

12.7-mm (0.50-in)

Supports the following

● Blu-ray ROM

rpm

rpm

rpm

rpm

rpm

Fixed (removal of one
screw required)

fixed tray load

drives:

with LightScribe
DVD±R/RW
SuperMulti DL
Drive

√√√√

√√√√

√√√√√

√√√√√

√√√√

√√√√√

√√√√√

√√√√

ENWW 7

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

● Blu-ray ROM

● DVD±R/RW

Diskette
drive

Camera VGA camera √√√√√

Fixed (no tilt) √√√√√

640 × 480 by 24

Microphone One microphone,

Audio HD audio √√√√√

DVD±R/RW
SuperMulti DL
Drive

DVD±R/RW

●

SuperMulti DL
Drive with
LightScribe

SuperMulti DL
Drive

Supports external
USB drive only

frames per second

analog

√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

UMA Models

100-149

Supports Microsoft

Premium
requirements

Altec Lansing

Modem

(select
models only)

Ethernet Integrated 10/100

Wireless Integrated wireless

Intel Centrino

Intel Centrino

speakers

Support for optional
high-speed 56k
modem

network interface card
(NIC)

local area network
(WLAN) options by
way of wireless
module:

Wireless-N 1000

802.11b/g 1x2

Wireless-N 1000

802.11b/g 1x2

√√√√√

√√√√√

√√√√√

√√√√√

√√√√

√√√√

8 Chapter 1 Product description ENWW

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Atheros AR9285

Atheros AR9285

Broadcom 4312G

Broadcom 4312G

Realtek RTL8191SE

Realtek RTL8191SE

External
media card

(select
models only )

802.11b/g/n 1x1 WiFi
Adapter

802.11b/g/n 1x1 WiFi
Adapter

802.11b/g WiFi
Adapter

802.11b/g WiFi
Adapter

802.11b/g/n 1x1 WiFi
Adapter

802.11b/g/n 1x1 WiFi
Adapter

5-in-1 Digital Media
Slot; supports SD,
MMC, MS, Mspro, xD

Discrete UMA Discrete UMA Models

150-199

√√√√√

√√√√√

√

√

√√√√√

√√√√√

√√√√√

UMA Models

100-149

Single port configured

as either HDMI or 5­in-1 Digital Media Slot

Supports mini

versions of SD, MMC,
and MS Duo with
adapter (adapter not
included)

Ports VGA (Dsub 15-pin)

supporting 1600 x
1200 resolution at 75
Hz; disabled when
connected to devices
through Expansion
port 3

Hot plug/unplug and

auto detect for wide­aspect or standard­aspect video

HDMI v1.3 supporting

1080p with HDCP key

Single port configured

for either HDMI or 5­in-1 card reader

√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

USB 2.0 (3) √√√√√

ENWW 9

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

RJ-11 (modem) with

RJ-45 (Ethernet, with

Audio-in (mono

Audio-out (stereo

Smart-pin AC adapter

Keyboard/
pointing
devices

TouchPad with 2

Power
requirement
s

modem option

link and activity lights)

microphone)

headphone)

plug

14.0-inch keyboard √√√√√

buttons and 2-way
scroll (taps enabled
as default)

6-cell (47-Wh) 2.20­Ah Li-ion battery

Discrete UMA Discrete UMA Models

150-199

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

√√√√√

UMA Models

100-149

65-W AC adapter with

90-W AC adapter with

Security Security cable slot √√√√√

Operating
system

Windows 7

Windows 7 Home

Windows 7 Home

Free DOS √√√

ServiceabilityEnd-user

AC adapter √√√√√

Battery (system) √√√√√

Smart-Pin DC
connector

Smart-Pin DC
connector

Preinstalled:

Professional (32 & 64
bit)

Premium (32 & 64 bit)

Basic (32 & 64 bit)

replaceable parts:

√√ √√

√

√√√√

√√√√

√√√

Hard drive √√√√√

10 Chapter 1 Product description ENWW

Category Description HP G42 HP G42 Compaq

Presario

CQ42

Compaq
Presario

CQ42

Compaq
Presario

CQ42

Discrete UMA Discrete UMA Models

150-199

Memory module √√√√√

Optical drive √√√√√

Mini-card device √√√√√

UMA Models

100-149

ENWW 11

12 Chapter 1 Product description ENWW

2 External component identification

Identifying the hardware

Components included with the computer may vary by region and model. The illustrations in this
chapter identify the standard features on most computer models.

To see a list of hardware installed in the computer, follow these steps:

1. Select Start > My Computer.

2. In the left pane of the System Tasks window, select View system information.

3. Select Hardware tab > Device Manager.

You can also add hardware or modify computer configurations using Device Manager.

ENWW Identifying the hardware 13

Top components

TouchPad

Component Description

(1)

(2) TouchPad zone Moves the pointer and selects or activates items on the

(3) Left TouchPad button Functions like the left button on an external mouse.

(4) Right TouchPad button Functions like the right button on an external mouse.

TouchPad off indicator To switch the TouchPad zone on and off, quickly double-tap

the TouchPad off indicator.

NOTE: When the TouchPad zone is active, the light is off.

screen.

There is an unmarked scroll zone inside the right edge of the TouchPad. To scroll up and down using
the TouchPad vertical scroll zone, slide your finger up or down inside the right edge of the TouchPad.
For more information about TouchPad features, refer to” Using the TouchPad” section later in this
guide.

14 Chapter 2 External component identification ENWW

Lights

Component Description

(1) TouchPad light

(2) Caps lock light On: Caps lock is on.

(3)

(4)

Power light

Wireless light

On: The TouchPad is disabled.

●

● Off: The TouchPad is enabled.

On: The computer is on.

●

● Blinking: The computer is in the Sleep state.

● Off: The computer is off or in Hibernation.

White: An integrated wireless device, such as a

●

wireless local area network (WLAN) device, is on.

Amber: All wireless devices are off.

●

ENWW Top components 15

Button and speakers

Component Description

(1) Speakers (2) Produce sound.

(2) Power button

When the computer is off, press the button to turn on the

●

computer.

● When the computer is on, press the button briefly to

initiate Sleep.

When the computer is in the Sleep state, briefly press

●

the button to exit Sleep.

When the computer is in Hibernation, briefly press the

●

button to exit Hibernation.

If the computer has stopped responding and Windows®
shutdown procedures are ineffective, press and hold the
power button for at least 5 seconds to turn off the computer.

To learn more about your power settings, select Start >
Control Panel > System and Security > Power Options.

16 Chapter 2 External component identification ENWW

Keys

Component Description

(1) esc key Displays system information when pressed in combination with

(2) fn key Displays system information when pressed in combination with

(3)

(4)

(5) Navigation keys Navigate using the Up, Down, Left and Right arrow keys.

(6) Action keys Execute frequently used system actions.

Windows logo key Displays the Windows Start menu.

Windows applications key Displays a shortcut menu for items beneath the pointer.

the fn key.

the esc key.

ENWW Top components 17

Display

Component Description

(1) Internal microphone Records sound.

(2) Integrated webcam (select models only) Records audio and video and captures still photographs.

(3) Integrated webcam light (select models only) On: The integrated webcam is in use.

18 Chapter 2 External component identification ENWW

Right-side components

Component Description

(1) Optical drive Reads and writes to optical discs.

(2) Optical drive light Blinking: The optical drive is being accessed.

(3)

(4) RJ-11 (modem) jack (select models only) Connects a modem cable.

(5) AC adapter/power/battery light

(6)

(7)

USB port Connects an optional USB device.

White: The computer is connected to external power and

●

the battery is fully charged.

● Blinking white: The computer is in the Sleep state.

Amber: A battery is charging.

●

Power connector Connects an AC adapter.

Security cable slot Attaches an optional security cable to the computer.

NOTE: The security cable is designed to act as a deterrent,

but it may not prevent the computer from being mishandled or
stolen.

ENWW Right-side components 19

Left-side components

Component Description

(1)

(2) Vent Enables airflow to cool internal components.

(3) HDMI port (select models only) Connects an optional video or audio device, such as a high-

(4)

(5)

(6)

(7)

(8) Digital Media Slot (select models only) Supports the following optional digital card formats:

External monitor port Connects an external VGA monitor or projector.

NOTE: The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.

definition television, or any compatible digital or audio
component.

RJ-45 (network) jack Connects a network cable.

USB ports (2) Connects optional USB devices.

Audio-in (microphone) jack Connects an optional computer headset microphone, stereo

array microphone, or monaural microphone.

Audio-out (headphone) jack Produces sound when connected to optional powered stereo

speakers, headphones, earbuds, a headset, or television
audio.

Memory Stick (MS)

●

Memory Stick Pro (MSP)

●

● MultiMediaCard (MMC)

● Secure Digital (SD) Memory Card

xD-Picture Card (XD)

●

(9)

Drive light On: The hard drive is in use.

20 Chapter 2 External component identification ENWW

Bottom components

Component Description

(1) Battery bay Holds the battery.

(2)

(3) Vents (4) Enable airflow to cool internal components.

(4)

(5)

Battery release latch Releases the battery from the battery bay.

NOTE: The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.

Memory module compartment Contains 2 memory module slots and, on select models,

the wireless LAN (WLAN) device.

CAUTION: To prevent an unresponsive system, replace

the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore computer
functionality, and then contact technical support through
Help and Support.

Hard drive bay Holds the hard drive.

ENWW Bottom components 21

Wireless antennas

At least 2 antennas send and receive signals from one or more wireless devices. These antennas are
not visible from the outside of the computer.

NOTE: For optimal transmission, keep the areas immediately around the antennas free from

obstructions.

To see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental
Notices that applies to your country or region. These notices are located in Help and Support.

22 Chapter 2 External component identification ENWW

Additional hardware components

Component Description

(1) Power cord* Connects an AC adapter to an AC outlet.

(2) AC adapter Converts AC power to DC power.

(3) Battery* Powers the computer when the computer is not plugged into

external power.

*Power cords vary in appearance by country or region.

WARNING! Connecting the internal analog modem to a digital line can permanently damage the

modem. Immediately disconnect the modem cable if you accidentally connect it to a digital line.

NOTE: Telephone jacks vary by country or region. To use the modem and the modem cable

(included with select models only) outside the country or region in which you purchased the
computer, you must obtain a country- or region-specific modem cable adapter (included with select
models or purchased separately). The modem must be connected to an analog telephone line using a
6-pin, RJ-11 modem cable (included with select models only). Jacks for digital PBX systems may
resemble analog telephone jacks, but they are not compatible with the modem.

If the modem cable contains noise suppression circuitry, which prevents interference from TV and
radio reception, orient the circuitry end of the cable toward the computer.

ENWW Additional hardware components 23

24 Chapter 2 External component identification ENWW

3 Illustrated parts catalog

Serial number location

When ordering parts or requesting information, provide the computer serial number and model
number located in the battery bay of the computer.

ENWW Serial number location 25

Computer major components

Item Description Spare part number

(1) 35.6 cm (14-in), WXGA, BrightView display assembly

NOTE: See

internal component spare part information.

For use with integrated microphone and webcam; Presario, matte black 592146-001

●

Display assembly components on page 33 for more display assembly

26 Chapter 3 Illustrated parts catalog ENWW

Item Description Spare part number

● For use with integrated microphone and webcam; HP, silver 606155-001

(2) Keyboards

● For use in Brazil (for models 1.1 and 1.2 only) 600175-201

● For use in South Korea 600175-AD1

● For use in the United States 600175-001

(3) Top cover (includes Touchpad, bracket, button board, and cable)

● Biscotti color 600182-001

For use with integrated microphone and webcam; Presario, biscotti 597617-001

●

For use with integrated microphone and webcam; HP, biscotti 600163-001

●

For use with integrated microphone and webcam; HP, white (for model 1.0 only) 606156-001

●

For use with integrated microphone and webcam; HP, charcoal (for models 1.1 and

●

1.2 only)

For use in Canada (English and French) 600175-121

●

For use in Latin America 600175-161

●

For use in Taiwan 600175-AB1

●

For use in Thailand 600175-281

●

Matte black color 600181-001

●

622571-001

● Charcoal color (for models 1.1 and 1.2 only) 622581-001

(4) Power button board (includes cable) 600188-001

(5) Touchpad button board (includes cable) 604603-001

(6) Thermal module — fan and heat assembly (includes thermal material)

(7) Speaker assembly (includes cable) 600189-001

(8) System boards (includes replacement thermal material)

● For use in models with DSC HD5430 (for model 1.0 only) 592810-001

Silver color 606161-001

●

White color (for model 1.0 only) 606162-001

●

For use in models that use Universal Memory Architecture (UMA) graphics

●

subsystem memory

For use in models that use discrete graphics subsystem memory 606610-001

●

For use in models that use DSC HD545V graphics subsystem memory (for model 1.0

●

only)

For use in models with DSC HD5430 MDM CR (for model 1.0 only) 592811-001

●

For use in models with UMA graphics subsystem memory, 592808-001

●

For use in models with UMA graphics subsystem memory and a modem and HDMI

●

card reader

606609-001

617029-001

592809-001

For use in models with HD545V DSC (for model 1.0 only) 611554-001

●

ENWW Computer major components 27

Item Description Spare part number

● For use in models with HD5470/512 MB DSC HDMI (for model 1.1 only) 616406–001

● For use in models with HD6370/512M discrete system board (for model 1.2 only) 632183-001

(9) Plastics Kit (see

(9a) Hard drive compartment cover

(9b) Wireless/memory module mini-card compartment cover

(10) RTC battery (includes mounting adhesive) 602745-001

(11) Memory modules

For use in models with HD545V DSC CR (for model 1.0 only) 611555-001

●

For use in models with HD5470/512 MB DSC (for model 1.1 only) 616405–001

●

For use in models with HD5470/1G DSC (for model 1.1 only) 616407–001

●

For use in models with HD5470/1G DSC HDMI (for model 1.1 only) 616408–001

●

For use in models with HD6370/512M discrete system board with card reader (for

●

model 1.2 only)

For use in models with HD6370/1G discrete system board (for model 1.2 only) 632185-001

●

For use in models with HD6370/512M discrete system board with card reader (for

●

model 1.2 only)

Plastics Kit on page 35 for more Plastics Kit information) 600190-001

2-MB, PC3-10600, 1333-MHz 598856-001

●

632184-001

632186-001

● 4-MB, PC3-10600, 1333-MHz (for models 1.1 and 1.2 only) 599092-001

(12) Modem module

(13) WLAN module

Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter

1-MB, PC3-10600, 1333-MHz 598859-001

●

High-speed 56K modem for use in all countries and regions except Australia and

●

New Zealand (for model 1.0 only)

High-speed 56K modem for use in Australia and New Zealand (for model 1.0 only) 510100-011

●

For use in Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and

●

the US Virgin Islands

510100-001

580101-001

28 Chapter 3 Illustrated parts catalog ENWW

Item Description Spare part number

Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0 and 1.1 only) 593533-001

SPS-WLAN BGN + BT HMC Combo Matador 600370-001

Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentian,

●

Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium,
Belize, Benin, Bhutan, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgeria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African
Republic, Chad, Chile, China, Colombia, Comoros, Congo, Costa Rica, Croatia,
Cyprus, Czech Republic, Zaire, Denmark, Djibouti, Dominica, Dominican Republic,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji,
Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan,
Jordan, Kazakhstan, Kenya, Kiribati, Korea-South, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Martinique, Nether Antilles, French Guiana, Aruba, British
Virgin Islands, Bermuda, Syria, Guadeloupe, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagaascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger,
Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru,
Philippines, Poland, Portugal, Republic of Moldova, Romania, rwanda, Samoa, San
Marino, Sao tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro,
Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia,
South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Gren,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand,
Timor (East), Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, United Arab Emirates ,United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zambia, and Zimbabwe

580101-002

SPS-WLAN 802.11 bgn Shiraz HMC 593836-001

SPS-WLAN BGN (1x1) + BT HMC Combo Rashi 602992-001

(14) Processor (includes replacement thermal material)

Advanced Micro Devices (AMD) processor P320 DDR3-1066 Mhz (for models 1.0

●

and 1.1 only)

Advanced Micro Devices (AMD) processor DDR3-1066 Mhz (for model 1.0 only) 594171-001

●

Advanced Micro Devices (AMD) processor P520 DDR3-1066 Mh (for models 1.0 and

●

1.1 only)

Advanced Micro Devices (AMD) processor DC N330 2.3GHz 1M L2 35W (for model

●

1.0 only)

Advanced Micro Devices (AMD) processor DC N530 DC 2.5GHz L2 35W (for models

●

1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor DC P820 Tri-Core 1.8Ghz 1.5M L2 25W

●

(for models 1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor N620 DDR3-1333 Mhz (for models 1.0

●

and 1.1 only)

Advanced Micro Devices (AMD) processor P320 DDR3-1066 Mhz (for models 1.0

●

and 1.1 only)

Advanced Micro Devices (AMD) processor DDR3-1066 Mhz (for model 1.0 only) 594171-001

●

594165-001

594173-001

594164-001

594172-001

594167-001

594166-001

594165-001

● Advanced Micro Devices (AMD) processor P520 DDR3-1066 Mh (for models 1.0 and

1.1 only)

594173-001

ENWW Computer major components 29

Item Description Spare part number

Advanced Micro Devices (AMD) processor DC N330 2.3GHz 1M L2 35W (for model

●

1.0 only)

Advanced Micro Devices (AMD) processor DC QC P920 1.6Ghz 2M L2 25W (for

●

models 1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor DC N530 DC 2.5GHz L2 35W (for models

●

1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor DC P820 Tri-Core 1.8Ghz 1.5M L2 25W

●

(for models 1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor N620 DDR3-1333 Mhz (for models 1.0

●

and 1.1 only)

Advanced Micro Devices (AMD) processor DC N930 QC 2.0 GHz 594169-001

●

Advanced Micro Devices (AMD) processor DC N830 Tri-core 2.1Ghz 1.5M L2 35W

●

(for models 1.0 and 1.1 only)

Advanced Micro Devices (AMD) processor DC P340 2.2GHz L2 25W (for models 1.1

●

and 1.2 only)

Advanced Micro Devices (AMD) processor DC N350 2.4GHz L2 35W (for models 1.1

●

and 1.2 only)

Advanced Micro Devices (AMD) processor DC P540 DC 2.4GHz L2 25W (for models

●

1.1 and 1.2 only)

Advanced Micro Devices (AMD) processor DC N550 DC 2.6GHz L2 35W (for models

●

1.1 and 1.2 only)

594164-001

594170-001

594172-001

594167-001

594166-001

594168-001

616343-001

616334-001

616347-001

616337-001

Advanced Micro Devices (AMD) processor DC N640 DC 2.9Ghz L2 35W (for models

●

1.1 and 1.2 only)

Advanced Micro Devices (AMD) processor DC P840 1.9Ghz L2 (for models 1.1 and

●

1.2 only)

Advanced Micro Devices (AMD) processor DC N850 2.2Ghz L2 (for models 1.1 and

●

1.2 only)

Advanced Micro Devices (AMD) processor DC P940 DC QC 1.7Ghz L2 (for models

●

1.1 and 1.2 only)

Advanced Micro Devices (AMD) processor DC P950 QC 2.1Ghz L2 35W (for models

●

1.1 and 1.2 only)

Advanced Micro Devices (AMD) processor Athlon II processor N370 2.5Ghz 1M 35W

●

(for model 1.2 only)

Advanced Micro Devices (AMD) processor Phenom II processor P650 2.6Ghz 2M

●

35W (for model 1.2 only)

Advanced Micro Devices (AMD) processor Phenom II processor P860 2Ghz 1.5M

●

25W (for model 1.2 only)

Advanced Micro Devices (AMD) processor Phenom II processor P960 1.8Ghz 2M

●

25W (for model 1.2 only)

Advanced Micro Devices (AMD) processor Turion II processor N570 2.7Ghz 2M 35W

●

(for model 1.2 only)

Advanced Micro Devices (AMD) processor Turion II processor P560 2.5Ghz 2M 35W

●

(for model 1.2 only)

616344-001

616335-001

616345-001

616336-001

616346-001

634686-001

634687-001

634688-001

634689-001

634690-001

634691-001

30 Chapter 3 Illustrated parts catalog ENWW

Item Description Spare part number

(15) USB board (includes cable) 600631-001

(16) Modem (RJ-11) cable (includes RJ-11 connector with modem cable) 610791-001

(17) Power connector cable (includes power connector and cable) 600630-001

(18) Base enclosure (with modem cable and ODD cable)

● For use without HDMI card reader, biscotti 617026-001

Advanced Micro Devices (AMD) processor Phenom II processor N660 3.0Ghz 2M

●

(for model 1.2 only)

Advanced Micro Devices (AMD) processor Phenom II processor N870 2.3Ghz 1.5

●

(for model 1.2 only)

Advanced Micro Devices (AMD) processor Phenom II processor N970 2.2Ghz 2M

●

(for model 1.2 only)

Advanced Micro Devices (AMD) processor Champlain SC processor V160 2.4Ghz

●

25W (for model 1.2 only)

Advanced Micro Devices (AMD) processor Athlon II discrete processor P360 2.5Ghz

●

35W (for model 1.2 only)

For use with HDMI card reader, biscotti 617025-001

●

For use with HDMI card reader and without modem module, silver 608912-001

●

For use with HDMI card reader and without modem, white (for model 1.0 only) 608913-001

●

635494-001

635495-001

635496-001

636634-001

636635-001

● For use with HDMI card reader, matte black 617027-001

(20) Battery

(21) Hard drive (include hard drive bracket)

● 500-GB 7200 RPM 608218-001

● 160-GB 7200 RPM (for models 1.0 and 1.2 only) 600167-001

(22) Hard drive cable/adapter (included with the cable kit; see

(23) Optical drive cable (included in the cable kit) 610791-001

(24) Optical drives (12.7 mm, SATA, fixed)

For use without HDMI card reader, matte black 617028-001

●

For use with HDMI card reader, charcoal (for models 1.1 and 1.2 only) 622579-001

●

6-cell 47-WH (2.2-Ah) LI-ion 593553-001

●

6-cell 55-WH (2.55-Ah) LI-ion 593554-001

●

750-GB 5400 RPM SATA 12.7mm (for model 1.2 only) 603787-001

●

640-GB 5400 RPM 603785-001

●

320-GB 7200 RPM 600169-001

●

250-GB 7200 RPM 575598-001

●

on page 36)

Mass storage devices

610791–001

● Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, matte

black

600173-001

ENWW Computer major components 31

Item Description Spare part number

● Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, white (for

● Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, charcoal

● DVD±RW SuperMulti DL Drive with LightScribe, matte black 600171-001

● DVD±RW SuperMulti DL Drive with LightScribe, white (for model 1.0 only) 608120-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, biscotti 600174-001

●

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, silver 608121-001

●

model 1.0 only)

(for model 1.1 only)

DVD±RW SuperMulti DL Drive with LightScribe, biscotti 600172-001

●

DVD±RW SuperMulti DL Drive with LightScribe, silver 608119-001

●

DVD±RW SuperMulti DL Drive with LightScribe, charcoal (for models 1.1 and 1.2

●

only)

608122-001

622577-001

622575-001

32 Chapter 3 Illustrated parts catalog ENWW

Display assembly components

Item Description Spare part number

(1) Display bezel

● Presario, for use with microphone and webcam 592148-001

(2) 35.6 cm (14-in) high definition, Brightview, display panel (includes display panel cable) 592144-001

(3) Display hinge cover 592150-001

Display bracket (with hinges) 600627-001

Display cable kit 592151-001

Display cable (shown with display panel)

HP, for use with microphone and webcam 592147-001

●

ENWW Display assembly components 33

Item Description Spare part number

(4) Webcam cable

(5) Antennas and cables

(6) Display back cover

● HP, biscotti 600165-001

● HP, charcoal (for models 1.1 and 1.2 only) 622573-001

(7) Webcam module 600166-001

Display screw kit (not illustrated; includes screws and screw covers) 592152-001

Display rubber display kit (not illustrated) 595198-001

Presario, matte black 592149-001

●

Presario, biscotti 600164-001

●

HP, silver 606157-001

●

HP, white (for model 1.0 only) 606158-001

●

34 Chapter 3 Illustrated parts catalog ENWW

Plastics Kit

Item Description Spare part number

Plastics kit 600190-001

(1) Hard drive bay cover (includes captive screws)

(2) Wireless/memory module mini-card compartment cover (includes captive screw)

ENWW Plastics Kit 35

Mass storage devices

Item Description Spare part number

(1) Hard drive (include hard drive bracket)

● 750–GB 5400 RPM SATA 12.7mm (for model 1.2 only) 603787-001

● 320-GB 7200 RPM 600169-001

Hard drive hardware kit (contains screws, hard drive bracket, not illustrated) 513771-001

Hard drive cable/adapter (included in the cable kit) 610791–001

(2) Optical drives (12.7 mm, SATA, fixed)

● Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, matte

● Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, biscotti 600174-001

● DVD±RW SuperMulti DL Drive with LightScribe, biscotti 600172-001

640–GB 5400 RPM 603785-001

●

500-GB 7200 RPM 608218-001

●

250-GB 7200 RPM 575598-001

●

160-GB 7200 RPM (for models 1.0 and 1.1 only) 600167-001

●

black

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, silver 608121-001

●

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, white (for

●

model 1.0 only)

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, charcoal

●

(for model 1.1 and 1.2 only)

DVD±RW SuperMulti DL Drive with LightScribe, matte black 600171-001

●

600173-001

608122-001

622577-001

DVD±RW SuperMulti DL Drive with LightScribe, silver 608119-001

●

36 Chapter 3 Illustrated parts catalog ENWW

Item Description Spare part number

DVD±RW SuperMulti DL Drive with LightScribe, white (for model 1.0 only) 608120-001

●

DVD±RW SuperMulti DL Drive with LightScribe, charcoal (for models 1.1 and 1.2

●

only)

622575-001

ENWW Mass storage devices 37

Miscellaneous parts

Description Spare part number

AC adapters

● 90-W Smart AC adapter with power factor correction (PFC) 613152-001

90-W AC adapter with power factor correction (PFC) 613160-001

●

65-W AC Smart, slim, AC adapter 613153-001

●

● 65-W Smart power adapter with power factor correction (PFC) for use in India 613161-001

Power cord, AC, 3 wire, black, 1.83-m

For use in Argentina 490371-D01

●

● For use in Australia 490371-011

For use in Brazil (for models 1.1 and 1.2 only) 490371-202

●

For use in India 490371-D61

●

● For use in Italy 490371-061

For use in North America 490371-001

●

For use in South Korea 490371-AD1

●

● For use in Taiwan 490371-AB1

For use in Thailand 490371-201

●

For use in the People's Republic of China 490371-AA1

●

● For use in the United Kingdom and Singapore 490371-031

For use in Europe (for model 1.2 only) 490371-021

●

Rubber kit 600184-001

Screw kit

Phillips M2.0x3.0 screw

●

Phillips M2.5x3.0 screw

●

● Phillips M2.5x4.0 screw

Phillips M2.5x5.0 screw

●

Phillips M2.5x6.5 screw

●

595202-001

38 Chapter 3 Illustrated parts catalog ENWW

Sequential part number listing

Spare part
number

490371-001 Power cord, AC, 3-pin, black, 1.83-m, for use in North America

490371-011 Power cord, AC, 3-pin, black, 1.83-m, for use in Australia

490371-021 Power cord, AC, 3–pin, black 1.83–m, for use in Europe (for model 1.2 only)

490371-031 Power cord, AC, 3-pin, black, 1.83-m, for use in the United Kingdom and Singapore

490371-061 Power cord, AC, 3-pin, black, 1.83-m, for use in Italy

490371-201 Power cord, AC, 3-pin, black, 1.83-m, for use in Thailand

490371-202 Power cord, AC, 3-pin, black, 1.83-m, for use in Brazil (for models 1.1 and 1.2 only)

490371-AA1 Power cord, AC, 3-pin, black,1.83-m, for use in the People's Republic of China

490371-AB1 Power cord, AC, 3-pin, black,1.83-m, for use in Taiwan

490371-AD1 Power cord, AC, 3-pin, black,1.83-m, for use in South Korea

490371-D01 Power cord, AC, 3-pin, black,1.83-m, for use in Argentina

490371-D61 Power cord, AC, 3-pin, black,1.83-m, for use in India

510100-001 Modem module, high-speed 56K modem for use in all countries and regions except Australia and New

510100-011 Modem module, high-speed 56K modem for use in Australia and New Zealand (for model 1.0 only)

Description

Zealand (for model 1.0 only)

513771-001 Hard drive hardware kit (screws and hard drive bracket)

575598-001 Hard disk drive, 250-GB 7200 RPM

580101-001 Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman Islands, Guam,

580101-002 Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Afghanistan, Albania, Algeria, Andorra,

Puerto Rico, the United States, and the US Virgin Islands

Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain,
Barbados, Belgium, Belize, Benin, Bhutan, Bosnia and Herzegovina, Botswana, Brazil, Brunei,
Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad,
Chile, China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire,
Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan,
Kenya, Kiribati, Korea-South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Martinique,
Nether Antilles, French Guiana, Aruba, British Virgin Islands, Bermuda, Syria, Guadeloupe,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali,
Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal,
Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao tome and Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon
Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Gren,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Timor (East),
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab
Emirates, United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, and
Zimbabwe

592144-001 Display panel, 35.6 cm (14-in) high definition, Brightview

ENWW Sequential part number listing 39

Spare part
number

Description

592146-001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

592147-001 Display bezel, HP, for use with microphone and webcam

592148-001 Display bezel, Presario, for use with microphone and webcam

592149-001 Display back cover, Presario, matte black

592150-001 Display hinge cover

592151-001 Display cable kit

592152-001 Display screw kit (not illustrated)

592808-001 For use in system boards with UMA

592809-001 For use in system boards with UMA MDM CR

592810-001 For use in system boards with HD5430 DSC (for model 1.0 only)

592811-001 For use in system boards with HD5430 DSC MDM CR (for model 1.0 only)

593533-001 Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0 and 1.1 only)

593553-001 Battery, 6-cell 47-WH (2.2-Ah) LI-ion

593554-001 Battery, 6-cell 55-WH (2.55Ah) LI-ion

593836-001 SPS-WLAN 802.11 bgn Shiraz HMC

594164-001 Processor Advanced Micro Devices (AMD) DC N330 2.3GHz 1M L2 35W (for model 1.0 only)

Presario, matte black

594165-001 Processor Advanced Micro Devices (AMD) P320 DDR3-1066 Mhz (for models 1.0 and 1.1 only)

594166-001 Processor Advanced Micro Devices (AMD) N620 35W DDR3-1333 Mhz (for models 1.0 and 1.1 only)

594167-001 Processor Advanced Micro Devices (AMD) DC P820 Tri-Core 1.8Ghz 1.5M L2 25W (for models 1.0

and 1.1 only)

594168-001 Processor Advanced Micro Devices (AMD) DC N830 Tri-core 2.1Ghz 1.5M L2 35W (for models 1.0

and 1.1 only)

594169-001 Processor Advanced Micro Devices (AMD) DC N930 QC 2.0 GHz

594170-001 Processor Advanced Micro Devices (AMD) DC QC P920 1.6Ghz 2M L2 25W (for models 1.0 and 1.1

594171-001 Advanced Micro Devices (AMD) processor V120 DDR3-1066 Mhz (for model 1.0 only)

594172-001 Processor Advanced Micro Devices (AMD) DC N530 2.5GHz DDR3-1333 Mhz (for models 1.0 and 1.1

594173-001 Processor Advanced Micro Devices (AMD) P520 DDR3-1066 Mhz (for models 1.0 and 1.1 only)

595198-001 Display rubber kit

595202-001 Screw kit

597617-001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

598856-001 Memory module, 2-GB, PC3 10600, 1333-MHz

only)

only)

Presario, biscotti

598859-001 Memory module, 1-GB, PC3 10600, 1333-MHz

40 Chapter 3 Illustrated parts catalog ENWW

Spare part
number

599092-001 Memory module, 4-GB, PC3 10600, 1333-MHz (for models 1.1 and 1.2 only)

Description

600163-001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

600164-001 Display back cover, Presario, biscotti

600165-001 Display back cover, HP, biscotti

600166-001 Webcam module

600167-001 Hard disk drive, 160-GB 7200 RPM (for models 1.0 and 1.1 only)

600169-001 Hard disk drive, 320-GB 7200 RPM

600171-001 Optical drive, DVD±RW SuperMulti DL Drive with LightScribe, matte black

600172-001 Optical drive, DVD±RW SuperMulti DL Drive with LightScribe, biscotti

600173-001 Optical drive, Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, matte black

600174-001 Optical drive, Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, biscotti

600175-001 Keyboard for use in the United States

600175-121 Keyboard for use in English and French Canada

600175-161 Keyboard for use in Latin America

600175-201 Keyboard for use in Brazil (for models 1.1 and 1.2 only)

600175-281 Keyboard for use in Thailand

600175-AB1 Keyboard for use in Taiwan

HP, biscotti

600175-AD1 Keyboard for use in South Korea

600181-001 Top cover (includes Touchpad and bracket, button board, and cable), matte black color

600182-001 Top cover (includes Touchpad and bracket, button board, and cable) , bicotti color

600184-001 Rubber kit

600188-001 Power button board (includes cable)

600189-001 Speaker assembly (includes cable)

600190-001 Plastics kit (with hard drive compartment cover and memory/wireless compartment cover)

600370-001 SPS-WLAN BGN + BT HMC Combo Matador

600627-001 Display bracket (with hinges)

600630-001 Power connector with cable

600631-001 USB board with cable

602745-001 RTC battery

602992-001 SPS-WLAN BGN (1x1) + BT HMC Combo Rashi

603785-001 Hard disk drive, 640-GB 5400 RPM

603787-001 750-GB 5400 RPM SATA 12.7mm (for model 1.2 only)

604603-001 Touchpad board (includes cable)

ENWW Sequential part number listing 41

Spare part
number

Description

606155–001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

606156–001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

606157–001 Display back cover, HP, silver

606158–001 Display back cover, HP, white (for model 1.0 only)

606161-001 Top cover (includes Touchpad and bracket, button board, and cable) , silver color

606162-001 Top cover (includes Touchpad and bracket, button board, and cable), white color (for model 1.0 only)

606609-001 Thermal module (includes fan and heat sink) for use in models that use UMA graphics subsystem

606610-001 Thermal module (includes fan and heat sink) for use in models that use discrete graphics subsystem

608119-001 Optical drive, DVD±RW SuperMulti DL Drive with LightScribe, silver

608120-001 Optical drive, DVD±RW SuperMulti DL Drive with LightScribe, white (for model 1.0 only)

608121-001 Optical drive, Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, silver

608122-001 Optical drive, Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, white (for

608218–001 Hard disk drive, 500-GB 7200 RPM

HP, silver

HP, white (for model 1.0 only)

memory

memory

model 1.0 only)

608912-001 Base enclosure (with modem cable and ODD cable) for use with HDMI card reader and without modem

module, silver

608913-001 Base enclosure (with modem cable and ODD cable) for use with HDMI card reader and without

modem, white (for model 1.0 only)

610791-001 Optical drive cable (included in the cable kit)

610791–001 Modem (RJ–11 cable with modem connector included in the cable kit)

610791–001 Hard drive cable/adaptor (included in the cable kit)

611554-001 For use in systems boards with HD545V DSC (for model 1.0 only)

611555-001 For use in system boards with HD545V DSC CR (for model 1.0 only)

613152-001 65-W Smart AC adapter

613153-001 90-W AC adapter with power factor correction (PFC)

613160-001 90-W AC adapter RC/V EM, with power factor correction (PFC)

613161-001 65-W AC adapter with power factor correction (PFC) for use in India

616334-001 Processor Advanced Micro Devices (AMD) DC N350 2.4GHz 35W (for models 1.1 and 1.2 only)

616335-001 Processor Advanced Micro Devices (AMD) P840 1.9GHz (for models 1.1 and 1.2 only)

616336-001 Processor Advanced Micro Devices (AMD) DC QC P940 1.7GHz (for models 1.1 and 1.2 only)

616337-001 Processor Advanced Micro Devices (AMD) DC N550 2.6GHz 35W (for models 1.1 and 1.2 only)

616343-001 Processor Advanced Micro Devices (AMD) DC P340 2.2GHz 25W (for models 1.1 and 1.2 only)

616344-001 Processor Advanced Micro Devices (AMD) N640 2.9GHz 35W (for models 1.1 and 1.2 only)

42 Chapter 3 Illustrated parts catalog ENWW

Spare part
number

616345-001 Processor Advanced Micro Devices (AMD) N850 2.2GHz (for models 1.1 and 1.2 only)

616346-001 Processor Advanced Micro Devices (AMD) QC N950 2.1GHz 35W (for models 1.1 and 1.2 only)

616347-001 Processor Advanced Micro Devices (AMD) DC P540 2.4GHz 25W (for model 1.1 only)

616405–001 System board for use in models with discrete graphics subsystem HD5470/512 MB (for model 1.0 only)

Description

616406–001 System board for use in models with discrete graphics subsystem HD5470/512 MB with HDMI card

616407–001 System board for use in models with discrete graphics subsystem HD5470/1 G (for model 1.0 only)

616408–001 System board for use in models with discrete graphics subsystem HD5470/1 G with HDMI card reader

617025-001 Base enclosure (with modem cable and ODD cable) for use with HDMI card reader, biscotti

617026-001 Base enclosure (with modem cable and ODD cable), biscotti

617027-001 Base enclosure (with modem cable and ODD cable) for use with HDMI card reader, matte black

617028-001 Base enclosure (with modem cable and ODD cable), matte black

617029-001 Thermal module (includes fan and heat sink) for use in models that use DSC HD545v graphics

622571–001 35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and webcam;

622573-001 Display back cover, HP, charcoal (for models 1.1 and 1.2 only)

622575-001 Optical drive, DVD±RW SuperMulti DL Drive with LightScribe, charcoal (for models 1.1 and 1.2 only)

608218-001

622577-001

622579-001 Base enclosure (with modem cable and ODD cable) for use with HDMI card reader, charcoal (for

reader (for model 1.0 only)

(for model 1.0 only)

subsystem memory (for model 1.0 only)

HP, charcoal (for models 1.1 and 1.2 only)

Optical drive, Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, charcoal (for
models 1.1 and 1.2 only)

models 1.1 and 1.2 only)

622581-001 Top cover (includes Touchpad and bracket, button board, and cable) , charcoal color (for models 1.1

and 1.2 only)

632183-001 For use in models with HD6370/512M discrete system board (for model 1.2 only)

632184-001 For use in models with HD6370/512M discrete system board with card reader(for model 1.2 only)

632185-001 For use in models with HD6370/1G discrete system board (for model 1.2 only)

632186-001 For use in models with HD6370/512M discrete system board with card reader (for model 1.2 only)

634686-001 Athlon II processor N370 2.5Ghz 1M 35W (for model 1.2 only)

634687-001 AMD Phenom II processor P650 2.6Ghz 2M 35W (for model 1.2 only)

634688-001 AMD Phenom II processor P860 2Ghz 1.5M 25W (for model 1.2 only)

634689-001 AMD Phenom II processor P960 1.8Ghz 2M 25W (for model 1.2 only)

634690-001 AMD Turion II processor N570 2.7Ghz 2M 35W (for model 1.2 only)

634691-001 AMD Turion II processor P560 2.5Ghz 2M 35W (for model 1.2 only)

635494-001 AMD Phenom II processor N660 3.0Ghz 2M (for model 1.2 only)

ENWW Sequential part number listing 43

Spare part
number

635495-001 AMD Phenom II processor N870 2.3Ghz 1.5 (for model 1.2 only)

635496-001 AMD Phenom II processor N970 2.2Ghz 2M (for model 1.2 only)

636634-001 AMD Champlain SC processor V160 2.4Ghz 25W (for model 1.2 only)

636635-001 AMD Athlon II discrete processor P360 2.5Ghz 35W (for model 1.2 only)

Description

44 Chapter 3 Illustrated parts catalog ENWW

4 Removal and replacement procedures

Preliminary replacement requirements

Tools required

You will need the following tools to complete the removal and replacement procedures:

● Flat-bladed screwdriver

● Magnetic screwdriver

Phillips P0 and P1 screwdrivers

●

Service considerations

The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.

NOTE: As you remove each subassembly from the computer, place the subassembly (and all

accompanying screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.

ENWW Preliminary replacement requirements 45

Cables and connectors

CAUTION: When servicing the computer, be sure that cables are placed in their proper locations

during the reassembly process. Improper cable placement can damage the computer.

Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.

Drive handling

CAUTION: Drives are fragile components that must be handled with care. To prevent damage to

the computer, damage to a drive, or loss of information, observe these precautions:

Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.

Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.

Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.

Handle drives on surfaces covered with at least one inch of shock-proof foam.

Avoid dropping drives from any height onto any surface.

After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.

Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.

Avoid exposing a drive to temperature extremes or liquids.

If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”

46 Chapter 4 Removal and replacement procedures ENWW

Grounding guidelines

Electrostatic discharge damage

Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.

A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.

An electronic device exposed to ESD may not be affected at all and can work perfectly throughout a
normal cycle. Or the device may function normally for a while, then degrade in the internal layers,
reducing its life expectancy.

CAUTION: To prevent damage to the computer when you are removing or installing internal

components, observe these precautions:

Keep components in their electrostatic-safe containers until you are ready to install them.

Use nonmagnetic tools.

Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.

Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.

If you remove a component, place it in an electrostatic-safe container.

The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.

CAUTION: A product can be degraded by as little as 700 V.

Typical electrostatic voltage levels

Relative humidity

Event 10% 40% 55%

Walking across carpet 35,000 V 15,000 V 7,500 V

Walking across vinyl floor 12,000 V 5,000 V 3,000 V

Motions of bench worker 6,000 V 800 V 400 V

Removing DIPS from plastic tube 2,000 V 700 V 400 V

Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V

Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V

Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V

Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V

ENWW Preliminary replacement requirements 47

Packaging and transporting guidelines

Follow these grounding guidelines when packaging and transporting equipment:

● To avoid hand contact, transport products in static-safe tubes, bags, or boxes.

Protect ESD-sensitive parts and assemblies with conductive or approved containers or

●

packaging.

● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.

Place items on a grounded surface before removing items from their containers.

●

Always be properly grounded when touching a component or assembly.

●

Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive

●

foam.

Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that

●

mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.

Workstation guidelines

Follow these grounding workstation guidelines:

● Cover the workstation with approved static-shielding material.

Use a wrist strap connected to a properly grounded work surface and use properly grounded

●

tools and equipment.

● Use conductive field service tools, such as cutters, screwdrivers, and vacuums.

When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe

●

materials.

● Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and

Styrofoam.

● Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle

these items only at static-free workstations.

Avoid contact with pins, leads, or circuitry.

●

● Turn off power and input signals before inserting or removing connectors or test equipment.

48 Chapter 4 Removal and replacement procedures ENWW

Equipment guidelines

Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.

● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible

straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper
ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug
connectors, use alligator clips to connect a wrist strap.

When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)

●

can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.

The following grounding equipment is recommended to prevent electrostatic damage:

Antistatic tape

●

Antistatic smocks, aprons, and sleeve protectors

●

Conductive bins and other assembly or soldering aids

●

Nonconductive foam

●

● Conductive tabletop workstations with ground cords of one megohm resistance

● Static-dissipative tables or floor mats with hard ties to the ground

Field service kits

●

Static awareness labels

●

Material-handling packages

●

Nonconductive plastic bags, tubes, or boxes

●

● Metal tote boxes

● Electrostatic voltage levels and protective materials

The following table lists the shielding protection provided by antistatic bags and floor mats.

Material Use Voltage protection level

Antistatic plastic Bags 1,500 V

Carbon-loaded plastic Floor mats 7,500 V

Metallized laminate Floor mats 5,000 V

ENWW Preliminary replacement requirements 49

Component replacement procedures

This chapter provides removal and replacement procedures.

There are as many as 75 screws, in 12 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.

Serial number

The serial number label, located in the battery bay of the computer, provides important information
that you may need when contacting technical support.

(1) Product name (4) Warranty period

(2) Serial number (5) Model description (select models)

(3) Product number

50 Chapter 4 Removal and replacement procedures ENWW

Computer feet

Description Spare part number

Rubber Feet Kit 600184-001

The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the
locations illustrated below.

ENWW Component replacement procedures 51

Battery

Description Spare part number

6-cell 55-WH (2.55Ah) LI-ion 593554-001

6-cell 47-WH (2.2-Ah) LI-ion 593553-001

Before disassembling the computer, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

Remove the battery:

1. Turn the computer upside down on a flat surface.

2. Slide the battery release latch (1) to release the battery.

3. Pivot the battery (2) upward and lift it out of the computer (3).

To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge
downward until the battery is seated. The battery release latch automatically locks the battery into
place.

52 Chapter 4 Removal and replacement procedures ENWW

Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket.

Description Spare part number

750–GB 5400 RPM SATA 12.7mm (for model 1.2 only) 603787-001

640-GB 5400 RPM 603785-001

500-GB 7200 RPM 608218-001

320-GB 7200 RPM 600169-001

250-GB 7200 RPM 575598-001

160-GB 7200 RPM (for models 1.0 and 1.1 only) 600167-001

Hard drive hardware kit (includes screws and hard drive bracket) 513771-001

Hard drive cable/adaptor (included in the cable kit) 610791–001

Before removing the hard drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

Remove the hard drive:

1. Position the computer with the front toward you.

2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the hard drive cover to the computer.

ENWW Component replacement procedures 53

3. Lift the left side of the hard drive cover (2), swing it forward, and remove the cover (3). The hard

drive cover is included in the plastics kit, spare part number 600190-001.

4. Remove the three Phillips PM2.5×4.0 screws (1) that secure the hard drive to the computer.

5. Use the hard drive bracket to lift the hard drive out (2) of the hard drive compartment.

54 Chapter 4 Removal and replacement procedures ENWW

6. Disconnect the hard drive cable from the system board.

7. Remove the hard drive.

8. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×3.0 screws

(1) that secure the hard drive bracket to the hard drive

9. Lift the bracket (2) straight up.

Reverse this procedure to install the hard drive.

ENWW Component replacement procedures 55

Optical drive

Description Spare part

DVD±RW SuperMulti DL Drive with LightScribe, matte black 600171-001

DVD±RW SuperMulti DL Drive with LightScribe, biscotti 600172-001

DVD±RW SuperMulti DL Drive with LightScribe, silver 608119-001

DVD±RW SuperMulti DL Drive with LightScribe, white (for model 1.0 only) 608120-001

DVD±RW SuperMulti DL Drive with LightScribe, charcoal (for models 1.1 and 1.2 only) 622575-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, matte black 600173-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, biscotti 600174-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, silver 608121-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, white (for model 1.0 only) 608122-001

Blu-ray Disc ROM LightScribe with SuperMulti DVD±R/RW Double-Layer, charcoal (for models 1.1 and

1.2 only)

number

622577-001

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

Remove the optical drive:

1. Position the computer upside down with the front toward you.

2. Remove the Phillips PM2.5x5.0 screw (1) that secures the optical drive to the computer.

3. Insert a flat-bladed screwdriver or similar tool into the access point through the hard drive

compartment (2), and then push the drive bracket to the left to release the optical drive.

56 Chapter 4 Removal and replacement procedures ENWW

4. Remove the optical drive (3).

5. If it is necessary to replace the optical drive bracket, position the optical drive with the optical

drive bracket toward you.

6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical

drive.

7. Remove the optical drive bracket (2).

Reverse the above procedure to reassemble and install the optical drive.

ENWW Component replacement procedures 57

WLAN module

Description Spare part

Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the US Virgin Islands

Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentian, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain,
Barbados, Belgium, Belize, Benin, Bhutan, Bosnia and Herzegovina, Botswana, Brazil, Brunei,
Bulgeria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad,
Chile, China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, Czech Republic, Zaire,
Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equitorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guatemala, Guinea, Guinea-Bissa, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya,
Kiribati, Korea-South, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Martinique, Nether
Antilles, French Guiana, Aruba, British Virgin Islands, Bermuda, Syria, Guadeloupe, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagaascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall
Islands, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway,
Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Poland, Portugal, Republic of
Moldova, Romania, rwanda, Samoa, San Marino, Sao tome and Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands,
Somalia, South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and Gren, Suriname,
Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Thailand, Timor (East), Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, United Arab Emirates ,United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zambia, and Zimbabwe

Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter (for models 1.0 and 1.1 only) 593533-001

number

580101-001

580101-002

SPS-WLAN BGN + BT HMC Combo Matador 600370-001

SPS-WLAN 802.11 bgn Shiraz HMC 593836-001

SPS-WLAN BGN (1x1) + BT HMC Combo Rashi 602992-001

Before removing the WLAN module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

5. Remove the hard drive cover (see

Battery on page 52).

Hard drive on page 53).

Remove the WLAN module:

1. Turn the computer upside down with the front toward you.

58 Chapter 4 Removal and replacement procedures ENWW

2. Loosen the 2 Phillips PM2.5×5.0 captive screws (1) that secure the mini-card compartment

cover.

3. Lift the cover off the computer (2). The mini-card compartment cover is included in the plastics

kit, spare part number 600190-001.

4. Disconnect the two WLAN antenna cables (1) from the WLAN module.

5. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the computer. (The

edge of the module opposite the slot rises away from the computer.)

6. Remove the WLAN module (3) by pulling it away from the slot at an angle.

CAUTION: To prevent an unresponsive system, replace the wireless module only with a

wireless module authorized for use in the computer by the governmental agency that regulates
wireless devices in your country or region. If you replace the module and then receive a warning
message, remove the module to restore computer functionality, and then contact technical
support through Help and Support.

NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion into the

WLAN module slot.

Reverse this procedure to install a WLAN module.

ENWW Component replacement procedures 59

Memory module

Description Spare part number

2–GB, PC3 10600, 1333-MHz 598856-001

1-GB, PC3 10600, 1333-MHz 598859-001

4-GB, PC3 10600, 1333-MHz (for models 1.1 and 1.2 only) 599092-001

Before removing the memory module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

Remove the memory module:

1. Turn the computer upside down with the front toward you.

2. Loosen the two Phillips PM2.5×5.0 captive screws that secure the mini-card compartment cover

to the computer.

60 Chapter 4 Removal and replacement procedures ENWW

3. Lift cover off the computer. The mini-card compartment cover is included in the plastics kit, spare

part number 600190-001.

NOTE: Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.

4. Spread the retaining tabs (1) on each side of the memory module slot to release the memory

module. (The edge of the module opposite the slot rises away from the computer.)

5. Remove the module (2) by pulling it away from the slot at an angle.

NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the

memory module slot.

Reverse this procedure to install a memory module.

ENWW Component replacement procedures 61

Keyboard

Description Spare part number

Keyboard for use in Brazil (for models 1.1 and 1.2 only) 600175-201

Keyboard for use in Canada (English and French) 600175-121

Keyboard for use in for use in Latin America 600175-161

Keyboard for use in South Korea 600175-AD1

Keyboard for use in Taiwan 600175-AB1

Keyboard for use in Thailand 600175-281

Keyboard for use in the United States 600175-001

Before removing the keyboard, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

the computer on, and then shut it down through the operating system.

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

5. Remove the hard drive (see

6. Remove the mini-card compartment cover (see

Battery on page 52).

Hard drive on page 53)

WLAN module on page 58).

Remove the keyboard:

1. Turn the computer upside down with the front toward you.

2. Remove the six Phillips PM2.5×6.5 screws that secure the keyboard to the computer.

3. Turn the computer display-side up with the front toward you.

4. Open the computer as far as possible.

62 Chapter 4 Removal and replacement procedures ENWW

5. Release the top edge of the keyboard by lifting it up to disengage the keyboard from the tabs on

the top cover (1).

6. Slide the top edge of the keyboard back (2) until it rests against the display.

7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and

disconnect the keyboard cable (2) from the system board.

8. Remove the keyboard.

Reverse this procedure to install the keyboard.

ENWW Component replacement procedures 63

Top cover

Description Spare part number

Top cover (includes Touchpad and bracket, button board, and cable), matte black 600181-001

Top cover, bicotti 600182-001

Top cover, silver 606161-001

Top cover, white (for model 1.0 only) 606162-001

Top cover, charcoal (for models 1.1 and 1.2 only) 622581-001

Before removing the switch cover, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

4. Remove the following components:

the computer on, and then shut it down through the operating system.

and then unplugging the AC adapter from the computer.

a. Battery (see

b. Optical drive (see

c. Keyboard (see

Battery on page 52).

Optical drive on page 56).

Keyboard on page 62).

Remove the switch cover:

1. Turn the computer upside down with the front toward you.

2. Remove the four screw covers (1) at the front edge of the computer.

64 Chapter 4 Removal and replacement procedures ENWW

3. Remove the five Phillips PM2.5×6.5 screws (2), the two Phillips PM2.5x4.0 screws (3), and the

four Phillips PM2.5x3.0 screws (4) that secure the top cover to the base enclosure.

4. Turn the computer display-side up with the front toward you.

5. Open the computer as far as possible.

6. Release the ZIF connector to which the touchpad (1) is connected and disconnect the cable

from the system board.

7. Release the ZIF connector to which the touchpad button board cable (2) is connected and

disconnect the cable from the system board.

8. Disconnect the speaker cable (3) from the system board.

ENWW Component replacement procedures 65

9. Release the ZIF connector to which the power button board cable (4) is connector and

disconnect the cable from the system board.

10. Remove the Phillips PM2.5×6.5 screw (1) from the top cover, disengage the rear edge of the top

cover (2) from the base enclosure, and then remove the cover from the computer (3).

Reverse this procedure to install the switch cover.

66 Chapter 4 Removal and replacement procedures ENWW

Speaker assembly

Description Spare part number

Speaker assembly 600189-001

Before removing the speaker assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Optical drive (see

b. Keyboard (see

c. Top cover (see

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Remove the speaker assembly:

1. Turn the top cover upside down.

2. Remove the two Phillips PM2.5×4.0 screws (1) that secure the speaker assembly to the

computer.

3. Lift the speaker assembly (2) straight up to remove it from the top cover.

Reverse this procedure to install the speaker assembly.

ENWW Component replacement procedures 67

Power button board

Description Spare part number

Power button board (with cable) 600188-001

Before removing the power button board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

d. Top cover (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Remove the power button board:

1. Turn the top cover upside down with the rear edge toward you.

2. Remove the Phillips PM2.5×3.0 screw (1) that secures the power button board to the top cover.

3. Remove the power button board (2).

68 Chapter 4 Removal and replacement procedures ENWW

TouchPad button board

Description Spare part number

TouchPad button board 604603-001

Before removing the TouchPad button board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

d. Top cover (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Remove the TouchPad button board:

1. Turn the top cover upside down with the front toward you.

2. Remove the two Phillips PM2.5×3.0 screws (1) that secure the TouchPad board to the top cover.

3. Remove the TouchPad button board (2) from the TouchPad bracket.

Reverse the above procedure to reassemble and install the TouchPad button board.

ENWW Component replacement procedures 69

Modem module

Description Spare part number

High-speed 56K modem for use in all countries and regions except Australia and New Zealand
(for model 1.0 only)

High-speed 56K modem for use in Australia and New Zealand (for model 1.0 only) 510100-011

Modem module cable with RJ-11 connector (included in the cable kit) 610791-001

510100-001

Before removing the modem module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

d. Top cover (see

Top cover on page 64)

Remove the modem module:

1. Turn the computer upright with the front toward you.

2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system

board.

3. Disconnect the modem module cable (2) from the modem module.

70 Chapter 4 Removal and replacement procedures ENWW

4. Lift up on the front of the modem module (3) to disconnect it from the system board.

5. Remove the modem module.

Reverse the above procedure to install the modem module, and be sure that the connector on the
bottom of the modem module connects firmly into the system board.

ENWW Component replacement procedures 71

USB board

Description Spare part number

USB board (includes cable) 600631-001

Before removing the USB board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

the computer on, and then shut it down through the operating system.

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

d. Top cover (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Remove the USB board:

1. Position the computer upright with the right side toward you.

2. Disconnect the USB board cable (1) from the system board.

3. Remove the Phillips PM2.5×3.0 screw (2) that secures the USB board to the base enclosure.

4. Lift the USB board (3) straight up to remove it from the computer.

Reverse this procedure to install the USB board.

72 Chapter 4 Removal and replacement procedures ENWW

Power connector cable

Description Spare part number

Power connector cable (includes cable and connector) 600630-001

Before removing the power connector cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

d. Top cover (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64))

Remove the power connector cable:

1. Turn the computer upright with the right side toward you.

2. Disconnect the power connector cable (1) from the system board.

3. Lift the power connector (2) from the clips built into the base enclosure.

4. Remove the cable from the base enclosure.

Reverse this procedure to install the power connector cable.

ENWW Component replacement procedures 73

Display assembly

Description Spare part number

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and

webcam; Presario, matte black

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; Presario, biscotti

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, biscotti

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, silver

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, white (for model 1.0 only)

35.6 cm (14-in) WXGA Brightview display assembly for use with integrated microphone and
webcam; HP, charcoal (for models 1.1 and 1.2 only)

592146-001

597617-001

600163-001

606155-001

606156-001

622571-001

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

5. Disconnect the wireless antenna cables from the WLAN module (see

Battery on page 52).

WLAN module

on page 58).

6. Remove the following components:

a. Keyboard (see

b. Optical drive (see

c. Top cover (see

Keyboard on page 62)

Optical drive on page 56)

Top cover on page 64)

Remove the display assembly:

1. Turn the computer display-side up, with the front toward you.

2. Open the display as far as possible.

3. Remove the wireless antenna cables (1) from the hole and clips built into the base enclosure.

4. Disconnect the display panel cable (2) from the system board.

5. Disconnect the microphone cable (3) from the system board.

74 Chapter 4 Removal and replacement procedures ENWW

6. Disconnect the webcam cable (2) from the system board.

CAUTION: Support the display assembly when removing the display screws in the following

steps. Failure to support the display assembly can result in damage to the assembly and other
components.

7. Remove the four black Phillips PM2.5×6.5 screws (1) that secure the display assembly to the

computer.

8. Remove the display assembly (2).

ENWW Component replacement procedures 75

9. If it is necessary to replace any of the display assembly internal components, remove the

following screw covers and screws. The display screw covers are included in the display screw
kit, spare part number 592152-001.

(1) Two Mylar screw covers on the display bezel bottom edge

(2) Two Phillips PM2.5×4.0 screws

10. Flex the inside edge of the top (1), the left and right sides (2), and the bottom (3) of the display

bezel until the bezel disengages from the display back cover.

11. Remove the display bezel (4). The display bezel is available using spare part number

592147-001 for HP computers, and 592148-001 for Presario computers.

76 Chapter 4 Removal and replacement procedures ENWW

12. If it is necessary to replace the webcam module, disconnect the webcam cable (1) from the

module. Lift the webcam from the double-sided tape on the display back cover, and remove the
webcam.

13. If it is necessary to replace the display panel, remove the eight Phillips PM2.5×5.0 screws (1)

that secure the display panel to the display enclosure, and then lift the panel from the enclosure

(2). The display panel is available using the spare part number 592144-001.

14. If it is necessary to replace the display cable, follow these steps:

a. Turn the display panel upside down in front of you.

b. Peel back the tape that secures the cable to the display (1).

c. Unplug the cable from the display (2).

d. Remove the cable from the display (3).

ENWW Component replacement procedures 77

The display cable is available in the display cable kit, spare part number 592151-001.

15. If it is necessary to replace the display bracket and hinges, remove the Phillips PM2.0×3.0

screws (1) that secure each bracket to the display.

16. Remove the display hinges (2) from the display. The display bracket and hinge set is available

using spare part number 600627-001.

17. If it is necessary to replace the wireless antennas and cables, remove the adhesive strip (1) that

secures each antenna to the display back cover.

18. Detach the wireless antenna (2) from the display back cover .

19. Remove the antenna cables from the clips (3) built into the display enclosure.

78 Chapter 4 Removal and replacement procedures ENWW

20. Remove the wireless antennas and cables (4) from the display enclosure. The wireless

antennas and cables are included in the display cable kit, spare part number 592151-001.

21. If it is necessary to remove the webcam cable, remove the cable from the adhesive strips (1)

along the cable path on the display back cover, and then remove the webcam cable (2). The
webcam cable is included in the display cable kit, spare part number 592151-001,

ENWW Component replacement procedures 79

22. If it is necessary to remove the microphone, release the microphone cable from the adhesive

strips (1) along the cable path on the display back cover, remove the microphone from the clips
on the display back cover (2), and then remove the microphone and microphone cable (3). The
microphone and cable is included in the display cable kit, spare part number 592151-001,

Reverse this procedure to reassemble and install the display assembly.

80 Chapter 4 Removal and replacement procedures ENWW

System board

Description Spare part number

System board for use in models with UMA graphics subsystem memory, 592808-001

System board for use in models with DSC HD5430 MDM CR (for model 1.0 only) 592811-001

System board for use in models with DSC HD5430 (for model 1.0 only) 592810-001

System board for use in models with UMA graphics subsystem memory 592809-001

System board for use in models with HD545V DSC (for model 1.0 only) 611554-001

System board for use in models with HD545V DSC CR (for model 1.0 only) 611555-001

System board for use in models with discrete graphics subsystem with HD5470/512 MB (for
model 1.1 only)

System board for use in models with discrete graphics subsystem with HD5470/512 MB with
HDMI card reader (for model 1.1 only)

System board for use in models with discrete graphics subsystem with HD5470/1 G (for model 1.1
only)

System board for use in models with discrete graphics subsystem with HD5470/1 G with HDMI
card reader (for model 1.1 only)

System board for use in models with discrete graphics subsystem with HD6370/512M (for model

1.2 only)

System board for use in models with discrete graphics subsystem with HD6370/512M with HDMI
card reader(for model 1.2 only)

System board for use in models with discrete graphics subsystems HD6370/1G (for model 1.2
only)

System board for use in models with discrete graphics subsystems HD6370/512M with HDMI card
reader (for model 1.2 only)

616405–001

616406–001

616407–001

616408–001

632183-001

632184-001

632185-001

632186-001

When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:

RTC battery (see

●

RTC battery on page 86)

Memory modules (see

●

WLAN module (see

●

● Modem module (see

Memory module on page 60)

WLAN module on page 58)

Modem module on page 70)

Before removing the system board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

ENWW Component replacement procedures 81

4. Remove the battery (see Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. WLAN (see

c. Optical drive (see

d. Keyboard (see

e. Top cover (see

f. Speaker assembly (see

g. Display assembly (see

h. Top cover (see

Hard drive on page 53)

WLAN module on page 58)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Speaker assembly on page 67)

Display assembly on page 74)

Top cover on page 64)

Remove the following cables from the system board if still connected:

Power connector cable (see

●

USB board cable (see

●

Power connector cable on page 73)

USB board on page 72)

1. Turn the computer upright with the right side toward you.

2. Remove the three Phillips PM2.5×3.0 screws that secure the system board to the computer.

3. Release the optical drive cable (1) from the system board.

4. Lift the right side of the system board (2).

82 Chapter 4 Removal and replacement procedures ENWW

5. Release the system board by sliding it to the right at an angle (3) until the connectors on the left

side of the system board clear the base enclosure, and then remove the system board.

6. If it is necessary to replace the modem module cable, remove the RJ-11 connector (1) from the

clip built into the base enclosure.

7. Remove the modem module cable (2) from the routing channel built into the base enclosure.

The modem module cable is available using spare part number 610791-001.

When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:

Fan/heat sink assembly (see

●

Processor (see

●

Processor on page 91)

Fan/heat sink assembly on page 88)

Reverse the preceding procedure to install the system board.

ENWW Component replacement procedures 83

Optical drive SATA cable and connector

Description Spare part number

Optical drive cable (included in the cable kit) 610791-001

Before removing the optical drive cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. WLAN (see

c. Optical drive (see

d. Keyboard (see

e. Top cover (see

f. Speaker assembly (see

g. Display assembly (see

h. System board (see

Hard drive on page 53)

WLAN module on page 58)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Speaker assembly on page 67)

Display assembly on page 74)

System board on page 81)

Remove the optical drive cable

1. Remove the two Phillips PM2.5×6.0 screws (1) that secure the optical drive connector to the

system board.

84 Chapter 4 Removal and replacement procedures ENWW

2. Release the cable from the clips on the base enclosure (2), and then remove the cable (3).

ENWW Component replacement procedures 85

RTC battery

Description Spare part number

RTC battery 602745-001

Before removing the RTC battery, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. WLAN (see

c. Optical drive (see

d. Keyboard (see

e. Top cover (see

f. Speaker assembly (see

g. Display assembly (see

h. System board (see

Hard drive on page 53)

WLAN module on page 58)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Speaker assembly on page 67)

Display assembly on page 74)

System board on page 81)

Remove the RTC battery:

1. Turn the system board upside down.

2. Release the RTC battery from the clips on the system board (1).

86 Chapter 4 Removal and replacement procedures ENWW

3. Remove the RTC battery (2).

Reverse this procedure to install the RTC battery.

ENWW Component replacement procedures 87

Fan/heat sink assembly

Description Spare part number

Fan/heat sink assembly for use in models that use Universal Memory Architecture (UMA) graphics
subsystem memory (includes thermal material)

Fan/heat sink assembly for use in models that use discrete graphics subsystem memory (includes
thermal material)

Fan/heat sink assembly for use in models that use DSC HD545V graphics subsystem memory
(includes thermal material) (for model 1.0 only)

606609-001

606610-001

617029-001

NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-inch) clearance on the right

side and rear panel of the computer. The computer uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on automatically when high temperature
conditions exist. These conditions are affected by high external temperatures, system power
consumption, power management/battery conservation configurations, battery fast charging, and
software requirements. Exhaust air is displaced through the ventilation grill located on the left side of
the computer.

Before removing the fan/heat sink assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 52).

5. Remove the following components:

a. Hard drive (see

b. Optical drive (see

c. Keyboard (see

d. Top cover (see

e. Speaker assembly (see

f. Display assembly (see

g. System board (see

Hard drive on page 53)

Optical drive on page 56)

Keyboard on page 62)

Top cover on page 64)

Speaker assembly on page 67)

Display assembly on page 74)

System board on page 81)

Remove the fan/heat assembly (fan/heat sink appearance may vary):

1. Turn the system board upside down.

2. Disconnect the fan cable (1) from the system board.

3. Follow the sequence embossed on heat sink to loosen the four Phillips PM2.5×7.0 captive

screws (2) that secure the fan/heat sink assembly to the system board.

88 Chapter 4 Removal and replacement procedures ENWW

NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink

assembly and system board components, it may be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.

4. Remove the fan/heat sink assembly (3).

The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1),
(3) and the processor (2) and video components (4) each time the fan/heat sink assembly is
removed. Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink
assembly is reinstalled.

NOTE: Thermal pads and thermal paste are included with all fan/heat sink assembly, system board,

and processor spare part kits.

The following illustration shows the locations for thermal material on systems with discrete graphics
subsystems.

ENWW Component replacement procedures 89

The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1)
and (3), and the processor component (2), each time the fan/heat sink assembly is removed. Thermal
pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is
reinstalled.

The following illustration shows the locations for thermal material on systems with UMA graphics
subsystems.

Reverse this procedure to install the fan/heat sink assembly.

90 Chapter 4 Removal and replacement procedures ENWW